反应溶剂对Bi2S3粉体形貌的影响

利用溶剂热法在不同反应溶剂中制备了不同尺寸的Bi2S3纳米管和纳米棒.利用XRD、SEM、TEM、选区电子衍射(SAED)和高分辨透射电镜(HRTEM)对其结构和形貌进行了表征.结果表明,所制备的产物是结晶良好的正交相Bi2S3,反应溶剂的表面张力、粘度大小和反应溶剂中的比例影响纳米粉体的形貌和尺寸.紫外-可见光吸收光谱测量表明,由于尺寸效应所有粉体的吸收谱相对于正交相的Bi2S3块体都出现蓝移.     

NH4F/H3PO4体系中阳极氧化法制备TiO2纳米管阵列

以价廉的Ni板代替常用的Pt片为阴极,纯钛为阳极,采用电化学阳极氧化法在NH4F-H3PO4体系中制备出TiO2纳米管阵列.详细研究了制备参数(溶液酸度、氟离子浓度、外加电压和氧化时间)对所获纳米管阵列形貌的影响.采用场发射扫描电镜(FE-SEM)和X射线衍射(XRD)对样品的形貌和晶相结构进行了表征.在最优化的条件下,可以获得形貌规整、表面干净、有序的TiO2纳米管阵列.纳米管阵列的平均管径为60 nm.管长约530 nm.采用阳极氧化法制备的纳米管阵列是非晶态的.经400℃热处理2 h后,可以转变为锐钛矿相.实验结果还发现,经过热处理后,纳米管阵列变得更为有序,管径扩大至约95 nm.     

溶剂热法合成In2S3/CuSe核壳结构粉体

本文以氯化铜、氯化铟、硫脲、亚硒酸以及硒粉为原料,乙二醇及乙二胺为溶剂,采用常压溶剂热法制备了硫化铟为核硒化铜为壳(In2S3/CuSe)的核壳结构复合粉体。主要探讨了反应温度、不同反应原料以及不同表面活性剂对产物物相以及形貌的影响。通过采用X射线衍射(XRD)、扫描电镜(SEM)对产物的物相、形貌以及组成进行了表征。实验结果表明:常压溶剂热条件下可以制备得In2S3/CuSe复合粉体,其最佳反应工艺参数是:于160℃下合成In2S3粉体为核,于100℃下合成包裹在In2S3表面的CuSe粉体从而获得In2S3/CuSe核壳结构复合粉。在该工艺参数下合成产物的形貌主要由圆球状颗粒组成,粉体的粒径分布在1~2μm。此外,本文也通过添加不同种类表面活性剂对产物的形貌进行了控制。     

水热法合成ReMn2O5(Re=Gd，Sm，Yb)纳米粉体

本文采用水热法,以KMnO4和Mn(C2H3O2):为锰源,在250℃反应24 h合成了高各向异性的GdMn2O5、SmMn2O5和YbMn2O5纳米粉体.利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、选区电子衍射(SAED)、和高分辨透射电镜(HRTEM)对产物的结构和形貌进行了表征.结果表明,所制备的ReMn2O5(Re=Gd,Sm,Yb)均为正交相结构.反应溶液中碱性矿化剂浓度对产物的形貌和尺寸有重要的影响.通过实验结果分析了纳米结构的形成机理.     

基于碳纳米管的氧化铈纳米管的合成及表征

建立了一种制备氧化铈纳米管的新方法, 即以碳纳米管(CNTs)为模板, 在常温常压下采用液相沉积法在CNTs表面包覆CeO2, 通过煅烧除去CNTs模板, 得到氧化铈纳米管. 通过透射电子显微镜(TEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)对其形貌和结构进行了表征. 所得CeO2纳米管为面心立方结构, 直径40~60 nm, 长度0.5~2 μm.     

添加La的Bi2Te3和Bi0.5Sb1.5Te3热电材料的电磁感应熔炼法制备及其热电性能

在N2气保护下,采用电磁感应法制备了添加La的Bi2Te3和Bi0.5Sb1.5Te3。运用X射线粉末衍射、电感耦合等离子光谱和扫描电子显微镜对材料的物相成分和形貌进行了表征。研究了La对Bi2Te3和Bi0.5Sb1.5Te3热电材料的电导率(σ)、Seebeck系数(S)和热导率(κ)的影响。实验结果表明,添加La明显降低了2种材料的热导率,提高了热电优值(ZT),添加La的Bi0.5Sb1.5Te3的热电优值在室温超过了1。     

硫掺杂钛酸(盐)纳米管的表征与可见光光催化活性

以二硫化钛为钛源和硫源,通过与NaOH水热反应成功制备了硫掺杂钛酸(盐)纳米管。 采用X射线衍射、高分辨透射电子显微镜、扫描电子显微镜、扩展X射线吸收精细结构(EXAFS)和X光微区分析等手段对所制备的硫掺杂钛酸(盐)纳米管的结构、形貌、硫掺杂状态和掺杂量进行了表征,并以可见光光催化氧化乙醇反应为探针,采用原位气相色谱技术研究了硫掺杂钛酸纳米管的可见光光催化活性;结果表明,S原子以S2-形式取代了钛酸纳米管骨架中O原子的位置, 有效实现了硫掺杂;硫掺杂钛酸(盐)纳米管壁厚平均尺寸为2.9 nm,管径平均尺寸为9.7 nm。 可见光光催化氧化乙醇反应结果表明,掺硫钛酸纳米管在极低的掺硫量条件下,表现出比未掺杂的二氧化钛纳米管具有更高的可见光光催化活性。     

Ni(OH)2纳米管的制备、表征及电化学性能

以多孔氧化铝为模板, 在不同溶液浓度下, 用化学沉积法制备了氢氧化镍纳米管. 采用XRD, SEM, TEM和HRTEM等手段, 对产物的物相、表面形貌及微结构进行了表征. 结果表明所得产物是高纯度的氢氧化镍纳米管, 外径约为180～220 nm, 管壁厚20～30 nm. 将所制备的氢氧化镍纳米管制成电极, 其电化学性能测试表明, Ni(OH)₂纳米管的中空结构特点, 能够有效地提高镍电极的充电效率、放电比容量、高倍率及高温放电性能. 机理分析表明中空结构的Ni(OH)₂纳米管对于提高碱性二次电池的综合性能有着极为重要的意义.     

Ni(OH)2纳米管的制备、表征及电化学性能

以多孔氧化铝为模板, 在不同溶液浓度下, 用化学沉积法制备了氢氧化镍纳米管. 采用XRD, SEM, TEM和HRTEM等手段, 对产物的物相、表面形貌及微结构进行了表征. 结果表明所得产物是高纯度的氢氧化镍纳米管, 外径约为180～220 nm, 管壁厚20～30 nm. 将所制备的氢氧化镍纳米管制成电极, 其电化学性能测试表明, Ni(OH)₂纳米管的中空结构特点, 能够有效地提高镍电极的充电效率、放电比容量、高倍率及高温放电性能. 机理分析表明中空结构的Ni(OH)₂纳米管对于提高碱性二次电池的综合性能有着极为重要的意义.     

多壁MoS2纳米管的低温催化制备

在H₂ + CH₄ + C₄H₄S催化还原气氛中, 于300℃加热分解高能球磨后的前驱体(NH4)2MoS₄. 用XRD, SEM, TEM, HRTEM, EDX和BET对反应产物进行了分析表征. 实验结果表明反应产物是多壁的MoS₂纳米管, 它们的长度可达3~5 mm, 内径约为15 nm, 外径约为30 nm, 层间距为0.62 nm. 实验测定了MoS₂纳米管N₂吸/脱附等温曲线及孔径大小分布. 这种低温催化热反应对该类纳米管的规模制备有着十分重要的意义.     

ZnO纳米线的电化学制备研究

High-quality ZnO nanowires have been synthesized at relatively low temperature via one-step electrochemical anodization technique. In this method, Zn sheet acted as the anode and Pb sheet served as the counter electrode, and the complex solution of HF-C₂H₅OH-H₂O was used as electrolyte. ZnO nanowires were characterized by Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED) and X-ray Diffraction (XRD). The results show that the nanowires were wurtzite crystalline ZnO, and the ZnO nanowires with the diameters of 70 nm and 30～40 nm were obtained by adjusting preparation conditions, respectively.     

TiO2纳米管的电化学性能研究

以锐钛矿相TiO2粉末和氢氧化钠作原料,应用化学合成法,于高温高压反应釜中制备TiO2纳米管.TEM、XRD分析显示,所得产物为锐钛矿相四方结构的TiO2纳米管.恒流充放电、循环伏安法测试表明,该TiO2纳米管首次嵌锂容量达260 mA.h/g,可逆容量高,有希望成为未来一种较好的新型锂离子电池负极材料.     

β-FeOOH纳米线的自排列及形成机理研究

通过无机铁(Ⅲ)盐的水解,在常温常压条件下制备了β-FeOOH纳米线,利用X射线粉末衍射仪(XRD)和透射电子显微镜(TEM)对其结构及形貌进行了表征. 结果表明,产物是结晶性良好的四方相β-FeOOH 纳米线,直径约 60 nm,长度为 4~5 μm,沿［001］方向生长. 根据实验结果讨论了β-FeOOH纳米线的生长机理. 而且,这些纳米线可以自发地垂直或平行地排列在一起,形成特殊的图案,这可能是由于纳米线之间的磁相互作用产生的.     

无机类富勒烯MoS2纳米材料的制备与表征

The Inorganic Fullerene-like MoS2 was obtained by a simple precipitation method using the polyethylenegly colas the dispersant,The hydroxylamine hydrochloride as the reductant, and (NH4)2S as the sulfursource. Themorphology and structure of the product were characterized by Powder X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and High-resolution Transmission Electron Microscopy (HRTEM). The results suggest that the polyethylene glycol dispersant can be adsorbed on the particle surface of the reaction precursor, amorphous MoS2 powders, to form a relative isolated environment. This isolated environment may induce an obstruct effect which helps the precursor nano-particles transfer to the IF structure in the subsequent calcinations process.     

Microwave-assisted preparation and enhanced photocatalytic activity of Bi2WO6/BiOI heterojunction for organic pollutants degradation under visible-light irradiation

In this research, we adopted morphology control and constructing p-n heterojunction to boost the photocatalytic performance of BiOI. BiOI with three morphologies (nanoplate, micro-flower, microsphere) was fabricated via a wet-chemical method at room temperature using different solvents. And Bi₂WO₆/BiOI microspheres were successfully prepared by a microwave-assisted synthetic method. The as-synthesized samples were characterized by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy (EDS) and High-resolution Transmission Electron Microscopy (HRTEM). The results of photo-degradation experiment demonstrated that BiOI-3 and BWOI-3 show high photocatalytic performance towards methyl orange (MO) and bisphenol A (BPA) degradation due to the high specific surface area, synergistic effect between p-type BiOI and n-type Bi₂WO₆ and high separation efficiency of electron-hole pairs, which is verified by Brunauer-Emmett-Teller (BET), Photocurrent (PC) and Electrochemical Impedance Spectroscopy (EIS) analysis. Moreover, the repeated photocatalytic experiment was carried out by using MO as the representative organic pollutant, manifesting the good durability of the sample.     

高度分散的Fe2O3/SiO2的合成及对F-T反应的催化性能

以初湿浸渍法为基础,柠檬酸为分散剂,制备出Fe2O3在SiO2载体上高度分散的F-T催化剂,通过N2吸脱附技术、X射线衍射、扫描透射电镜和程序升温还原对催化剂的结构,形貌及组成进行表征,结果表明,在柠檬酸分散作用下,浸渍过程中Fe离子与SiO2载体之间的静电吸附作用使Fe离子稳定、均匀地分散于SiO2表面,在烘干、焙烧过程中未发生团聚现象,形成高度分散、均匀的纳米颗粒,粒径平均尺寸为1.1nm。以F-T合成反应作为模型反应对催化活性进行表征,该法合成的催化剂表现出较优异的稳定性,反应500h后CO转化率保持在35.1%。     

Effect of the AACVD based synthesis atmosphere on the structural properties of multi-walled carbon nanotubes

The synthesis of multi-walled carbon nanotubes (MWCNT_S) has been the focus of considerable research effort for more than twenty-five years and it continues to receive increasing attention because of its importance to produce carbon nanotubes with suitable parameters for future applications. To the best of our knowledge this study presents for the first time the complex studies concerning the effect of aerosol-assisted chemical vapour deposition (AACVD) process conditions (including temperature (750–1200 °C) and the composition of the carrier gas (N₂, Ar, He, 5% H₂-95% Ar, 3% H₂O-97% Ar)) on the conversion of the carbon source and on the properties of the carbon nanotubes. In addition, it was also found that oxidative or reductive atmosphere applied during the AACVD process have a great impact on the quality and the degree of toluene conversion into the carbon solids obtained during the synthesis. X-ray Diffraction (XRD), Specific Surface Area and Porosity analysis (BET), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), Transmission Electron Microscopy (TEM), Raman spectroscopy and Thermo-gravimetric Analysis (TG) were used to characterize the carbon nanotubes.     

Photocatalytic properties of Ru-doped titania prepared by homogeneous hydrolysis

Nanocrystalline titania particles doped with ruthenium oxide have been prepared by the homogenous hydrolysis of TiOSO₄ in aqueous solutions in the presence of urea. The synthesized particles were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM), Selected Area Electron Diffraction (SAED) and Nitrogen adsorption-desorption was used for surface area (BET) and porosity determination (BJH). The photocatalytic activity of the Ru-doped titania samples were determined by photocatalytic decomposition of Orange II dye in an aqueous slurry during irradiation at 365 nm and 400 nm wavelengths.      

CuOx/TiO2光催化水蒸气还原CO2

以商品TiO2-P25为原料,通过浸渍法负载一定量过渡金属Cu,得到一系列不同含量的CuOx/TiO2光催化剂。利用X射线衍射（XRD）,X－射线光电子能谱（XPS）,BET,高分辨率透射镜（HRTEM）,X射线荧光光谱（XRF）和光致发光光谱（PL）等方法对催化剂进行了详细表征,在自建的光催化反应器中评价了气态水光催化还原CO2反应的活性和CH4收率。结果表明负载CuOx后的TiO2纳米材料光催化性能显著提高,其中1%CuOx/TiO2样品紫外光照72 h后,CH4生成量达到了24.86 µmol•gTi-1。同时,CuOx负载量、反应温度、反应时间等因素对CH4收率均有显著影响。     

Lattice imaging of bismuth clusters

Small bismuth clusters with narrow size distribution (2→10 atoms) were generated in an inert gas condensation source and vacuum deposited, at room temperature, on amorphous carbon. The deposit has been characterized by Transmission Electron Microscopy (TEM) which has shown a growth process involving the formation of large particles: diameter from 1.5 to 20 nm. Axial illumination lattice imaging with a high resolution electron microscope has been performed. Particles of about 20 nm diameter have been formed with a single crystalline core edged by an amorphous shell. Cluster images in the \([\bar 220\bar 1]\) direction are presented in detail and compared with simulated images of bismuth single crystal.