Confirmation of vanadium complex formation using electrospray mass spectrometry and determination of vanadium speciation by sample stacking capillary electrophoresis

Capillary zone electrophoresis (CZE) with UV detection was used to determine vanadium species. Nitrilotriacetic acid (NTA), hydroxyethylethylenediaminetriacetic acid (HEDTA), ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), ethylene glycol-bis(2-aminoethylether)-tetraacetic acid (EGTA) and 2,6-pyridinedicarboxylic acid (PDCA) were investigated to determine whether these ligands formed stable anionic complexes with vanadium. Of all the ligands studied HEDTA was the most suitable ligand because it gave the largest UV response with reasonable migration time. Electrospray mass spectrometry (ES-MS) was used to confirm the formation of [VO₂(HEDTA)]²⁻ and [VO(HEDTA)]¹⁻ in solution. An electrolyte containing 25 mM phosphate, 0.25 mM tetradecyltrimethylammonium bromide (TTAB) at pH 5.5 was optimum for the separation of these anionic vanadium complexes. Sample stacking techniques, including large-volume sample stacking (LVSS) and field-amplified sample injection (FASI), were tested to improve the sensitivity. Best sensitivity was obtained using FASI, with detection limits of 0.001 μM, equivalent to 0.4 μg L⁻¹, for [VO₂(HEDTA)]²⁻ and 0.01 μM, equivalent to 3.4 μg L⁻¹ for [VO(HEDTA)]¹⁻. The utility of the method for the speciation of V(IV) and V(V) was demonstrated using ground water samples.     

On-column complexation capillary electrophoretic separation of Fe2+ and Fe3+ using 2,6-pyridinedicarboxylic acid coupled with large-volume sample stacking

On-column complexation of Fe2+ and Fe3+ with 2,6-pyridinedicarboxylic acid (2,6-PDCA) formed anionic complexes, which were then separated by capillary zone electrophoresis with direct UV detection at 214 nm. To achieve reasonable separation selectivity and on-column complexation, the conditions such as pH, the concentration of 2,6-PCDA and the EOF modifiers in the electrolyte were examined. The electrolyte contained 5.0 mM 2,6-PDCA, 0.25 mM tetradecyltrimethlammonium bromide (TTAB) and 5% (v/v) acetonitrile at pH 4.0 was optimised for on-column complexation and the separation of Fe[PCDA]2(2-) and Fe[PCDA]2(-). To enhance the detection sensitivity, large-volume sample stacking (LVSS) was used for the on-line preconcentration of Fe[PCDA]2(2-) and Fe[PCDA]2(-). Under the optimised conditions, satisfactory working ranges (0.5-50 microM), lower detection limits (less than 0.1 microM) and good repeatability of the peak areas (R.S.D.: 5.2-7.8%, n = 5) was achieved using LVSS (300 s). With LVSS, the detection sensitivity was enhanced more than 50-fold compared to conventional hydrodynamic injection. The proposed method was used successfully for the determination of Fe2+ and Fe3+ in water samples.     

Enhanced selectivity and sensitivity for inorganic anions using an ion-pairing reagent and sample stacking in capillary zone electrophoresis with direct UV detection

In this paper, the use of an ion-pairing reagent to improve the separation selectivity of inorganic anions in CZE was demonstrated by the addition of tetramethylammonium hydroxide (TMAOH) to the electrolyte. The separation of inorganic anions (Cl(-), I(-), Br(-), NO(2)(-), NO(3)(-) and SCN(-)) was performed using co-electroosmotic flow (EOF) with direct UV detection at 185 nm. The parameters affecting the mobility of the tested anions and the EOF such as the electrolyte pH and concentration of TMAOH in the electrolyte were examined to optimise the separation conditions. In addition, sample-stacking techniques were investigated to improve detection sensitivity. Detection sensitivities were improved 5-13-fold using electrokinetic sample stacking. The detection limits ranged from 1-3 micro mol L(-1). Finally, the proposed method was used for the separation of anions in groundwaters.     

Separation via flotation, spectrophotometric speciation, and determination of vanadium(IV) in wastes of power stations.

1-(2-Hydroxy-4-methoxybenzophenone)-4-phenylthiosemicarbazone (HMBPT) was investigated as a new reagent for the flotation of vanadium(IV). At pH approximately 1.5, vanadium(IV) forms a 1:1 pale-violet complex with HMBPT in aqueous solution. An intense clear violet layer was formed after flotation, by adding an oleic acid (HOL) surfactant. The composition of the float was 1:1 [V(IV)]:[HMBPT]. A highly selective and sensitive spectrophotometric procedure was proposed for the determination of microamounts of V(IV) as its floated complex. The molar absorptivities of the V(IV)-HMBPT and V(IV)-HMBPT-HOL systems were 0.4 x 10(4) and 0.12 x 10(5) L mol(-1) cm(-1) at 560 nm, respectively. The formation constants of the species formed in the presence and absence of HOL were 4.6 x 10(7) and 8.7 x 10(5) L mol(-1), respectively. Beer's law was obeyed up to 1 x 10(-4) mol L(-1) in the aqueous layer as well as in the oleic acid layer. The HMBPT-V(IV) complexes formed in the aqueous solution and scum layer were characterized by elemental analysis, infrared and UV spectrophotometric studies. The mode of chelation between V(IV) and HMBPT is proposed to be due to a reaction between the protonated bidentate HMBPT ligand and V(IV) through the S=C and N=C groups. Interferences from various foreign ions were avoided by adding excess HMBPT and/or Na2S2O3 as a masking agent. The proposed flotation method was successfully applied to the analysis of V(IV) in synthetic mixtures, wastes of power stations, simulated samples and in real ores. The separation mechanism is discussed.     

Speciation of heavy metals in environmental water by ion chromatography coupled to ICP–MS

Biogenic (e.g. phytochelatins, porphyrins, DOM) as well as anthropogenic (e.g. NTA, EDTA, phosphonates) chelators affect the mobility and cycling of heavy metals in environmental waters. Since such chelators can form strongly bound anionic heavy metal complexes that are stable and highly mobile, anion-exchange chromatography coupled to ICP-MS was investigated. A narrow bore HPLC system was connected to a micro concentric nebuliser for in-line sample introduction. A new chromatographic procedure based on a synthetic hydrophilic quaternary ammonium anion exchanger in combination with nitrate as a strong eluent anion, and gradient elution, provided high separation selectivity and a large analytical window. Low detection limits (nmol L(-1)) were achieved by on-column matrix removal and sample preconcentration. This allowed the method to be successfully applied to different environmental research areas. In ecotoxicological studies of heavy metal effects on algae low concentrations of metal EDTA complexes were determined in nutrient solutions without interference from high (buffer) salt concentrations. In groundwater, infiltrated by a polluted river, mobile metal EDTA species were observed. In river water of different pollution levels beside CuEDTA other anionic Cu-complexes were found in nmol L(-1) concentrations.     

Separation of chromium (III) and chromium (VI) by capillary electrophoresis using 2,6-pyridinedicarboxylic acid as a pre-column complexation agent

A simple method was developed for the simultaneous determination of Cr(III) and Cr(VI) by capillary zone electrophoresis (CZE), where Cr(III) was chelated with ligands to form anionic complexes. Nitrilotriacetic acid, N-2-hydroxyethylenediaminetriacetic acid, ethylenediaminetetraacetic acid, diethylenetriaminepentaacetic acid, and 2,6-pyridinedicarboxylic acid (PDCA) were investigated as Cr(III) complexing ligands. Of all the ligands studied, 2,6-PDCA with Cr(III) gave the largest UV response and high selectivity for Cr(III). In addition, the condition for pre-column derivatization, including pH, concentration ratio [Cr(III)/2,6-PDCA] and the stability of Cr(III) complexes were also examined. The separation of anionic forms of Cr(III) and Cr(VI) was achieved using co-CZE with UV detection at 185 nm. The electrolyte contained 30 mM phosphate, 0.5 mM tetradecyltrimethylammonium bromide, 0.1 mM 2,6-PDCA and 15% (v/v) acetonitrile at pH 6.4. The detection limits were 2 microM for Cr(III) and 3 microM for Cr(VI) and linear plots were obtained in a concentration range of 5-200 microM. The utility of the method was demonstrated for the determination of Cr(III) and Cr(VI) in contaminated soils.     

Determination of niobium in pyrochlore ore by differential pulse polarography

A differential pulse polarographic method has been developed for the quantitative determination of niobium in pyrochlore ore. One-step polarographic curves were obtained in 0.01 mol L(-1) EDTA as supporting electrolyte. Analytical curves indicated that response was linearly dependent on Nb(V) concentration between 1.6 and 8.6 mg L(-1) in the pH range 2-5. The system is quasi-reversible and controlled by diffusion in 0.01 mol L(-1) EDTA as supporting electrolyte; the electrode process involves one-electron reduction of Nb(V) to Nb(IV). The results obtained so far for niobium in pyrochlore ore were comparable with those obtained by X-ray fluorescence determination. Ions such as Fe(III), Cr(III), As(III), Cu(II), Ni(II), Co(II), Mn(II), Sn(IV), Zn(II), V(V), Ta(V), W(VI), Ce(IV), and Ti(IV) did not interfere. Possible interference from Pb(II) can be avoided by complexation with the supporting electrolyte in the pH range 3.5 to 4.6; Mo(VI) ions can be tolerated when their concentration is one-tenth that of Nb(V).     

Sorption behavior of vanadium on silica gel modified with tetrakis(4-carboxyphenyl)porphyrin.

Tetrakis(4-carboxyphenyl)porphyrin (TCPP) has been loaded on aminopropyl-silica gel by physical adsorption and by direct immobilization through formation of an amide bond to obtain chelating sorbents. These sorbents have been studied for preconcentration and separation of vanadium prior to its determination by atomic absorption spectrometry. Several parameters, such as sorption capacity of the chelating resin, pH for retention of V(IV) and V(V), volume of sample and eluent, were evaluated. Both vanadium species sorbed on TCPP-modified resin could be eluted using 2 mol L(-1) nitric acid solution. The recovery values were > 94% and preconcentration factor of 160 was obtained. For speciation analysis, cyclohexane-1,2-diaminetetraacetic acid (CDTA) was added to the sample for complexation of vanadium(IV), which was not retained on the microcolumn. The proposed method was examined for reference standard materials (TM-25.2 and CAAS-3) as well as for river water samples.     

Comparison of chromium speciation by CZE and ion exchange followed by AAS

The hydrogen chromate anion (HCrO4-), which is the predominant species in acidic solutions and solutions with low chromium concentration, was determined by capillary zone electrophoresis (CZE) using UV detection on-column at 200 nm. A fused-silica capillary (55 cm x 50 microm i.d.) was employed with a high negative voltage of 20 kV. Total chromium was determined after reduction by H2O2 and its complexation by EDTA. The use of H2O2 as reducing agent is advantageous, as it does not increase the conductivity of the solution. Detection limits achieved (for 200 s injection time) were 30 and 8 microg/L for Cr(VI) and Cr(III), respectively. The CZE results obtained for Cr(III) and Cr(VI) were compared with those obtained by ion exchange with subsequent AAS.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Study on the systematic optimization of capillary electrophoresis using a controlled weighted centroid variable size simplex algorithm

The systematic optimization of capillary electrophoretic separations using a dynamic scouting optimum method-controlled weighted centroid variable size simplex algorithm is described. The factors affecting the efficiency of the separation are simultaneously considered during the optimization procedures. The established optimization method is applied to amino acid separation by capillary zone electrophoresis (CZE) with on-column indirect UV detection and to the separation of local anesthetics by micellar electrokinetic chromatography (MECC) with on-column UV detection. The optimization procedures include the pH and the background absorption electrolyte (BGAE) concentrations together with the applied voltage in the CZE separation of amino acids. The pH, the SDS concentrations together with the percentage of methanol are considered in the MECC separation of local anesthetics. Two methods, i.e., the Long Coefficient and Uniform Design Table, are used to define the start vertexes during the optimization procedure and similar final experimental conditions for the separations are achieved. Thirteen native amino acids are baseline separated by CZE and 4 local anesthetics are satisfactorily separated by MECC.     

Speciation and preconcentration of vanadium(V) and vanadium(IV) in water samples by flow injection-inductively coupled plasma optical emission spectrometry and ultrasonic nebulization

An on-line separation, preconcentration and determination system for vanadium(IV) and vanadium(V) comprising inductively coupled plasma optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) method with an ultrasonic nebulization (USN) system was studied. The vanadium species were retained on an Amberlite XAD-7 resin as a vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (V-5-Br-PADAP) complex at pH 3.7. Enhanced selectivity was obtained with the combined use of the formation on-line of the complexes and 1,2-cyclohexanediaminetetraacetic acid (CDTA) as masking agent. The vanadium complexes were removed from the microcolumn with 25% v/v nitric acid. A sensitivity enhancement factor of 225 was obtained with respect to ICP-OES using pneumatic nebulization (15-fold for USN and 15-fold for the microcolumn). The detection limit for the preconcentration of 10 mL of aqueous solution was 19 ng L-1. The precision for 10 replicate determinations at the 5 micrograms L-1 V level was 2.3% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the separation and preconcentration system for vanadium species was linear with a correlation coefficient of 0.9992 at levels from near the detection limits up to at least 100 micrograms L-1. The method was successfully applied to the speciation of vanadium in river water samples.     

Liquid anion-exchange separation of vanadium from malonate media

Summary Vanadium(IV) and (V) can be quantitatively extracted with 0.2 mol/l Amberlite LA-2 in xylene at pH 3.0 from 0.02 mol/l malonic acid, stripped with 0.5 mol/l hydrochloric acid, and determined spectrophotometrically. Five other liquid anion exchangers (Amberlite LA-1, Primene JM-T, Aliquat 336S, TOA and TIOA) were examined as possible extractants. The extraction of vanadium(IV) was found to be quantitative only with Amberlite LA-2, while that of vanadium(V) was quantitative with Amberlite LA-1 and LA-2, Primene JM-T and Aliquat 336S. Eight common solvents were tested as diluents; of these hexane, cyclohexane, benzene, and xylene were found to be satisfactory. Vanadium was separated from elements that do not form anionic complexes with malonic acid by selective extraction, from those that form weak complexes by washing the organic extract with water, and from metals that form strong malonato complexes by selective stripping with hydrochloric, nitric, or sulphuric acid. The method has been applied to the determination of vanadium in steel, coal fly ash and fuel oil. The precision of measurement is within ±5% and the detection limit of the method for vanadium is 0.5 mg/kg.     

Study on the systematic optimization of capillary electrophoresis using a controlled weighted centroid variable size simplex algorithm

The systematic optimization of capillary electrophoretic separations using a dynamic scouting optimum method-controlled weighted centroid variable size simplex algorithm is described. The factors affecting the efficiency of the separation are simultaneously considered during the optimization procedures. The established optimization method is applied to amino acid separation by capillary zone electrophoresis (CZE) with on-column indirect UV detection and to the separation of local anesthetics by micellar electrokinetic chromatography (MECC) with on-column UV detection. The optimization procedures include the pH and the background absorption electrolyte (BGAE) concentrations together with the applied voltage in the CZE separation of amino acids. The pH, the SDS concentrations together with the percentage of methanol are considered in the MECC separation of local anesthetics. Two methods, i.e., the Long Coefficient and Uniform Design Table, are used to define the start vertexes during the optimization procedure and similar final experimental conditions for the separations are achieved. Thirteen native amino acids are baseline separated by CZE and 4 local anesthetics are satisfactorily separated by MECC. Received: 10 November 1997 / Revised: 19 January 1998 / Accepted: 24 January 1998     

Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

Spectroscopic characterization,thermogravimetric and antimicrobial studies of some new metal complexes derived from4-(4-Isopropyl phenyl)-2-oxo-6-phenyl 1,2-dihyropyridine-3-carbonitrile (L)

A new series of Fe (III), Co (II), Zn (II), Y (III), Zr (IV) and La (III) complexes derived from the novel ligand 4-(4-Isopropyl phenyl)-2-oxo-6-phenyl 1,2-dihyropyridine-3-carbonitrile (L) were synthesized and characterized. The mode of bonding of L and geometrical structures of their metal complexes were elucidated by different micro analytical and spectral methods (FT-IR,UV–visible,1H NMR and Mass spectra) as well as thermal analysis (TG and DTG), and differential scanning calorimetry (DSC). The results of analytical and spectroscopic equipments revealed that L acts as bidentate through nitrogen of carbonitrile group and oxygen of keto group. The conductivity measurement results deduced that these chelates are electrolyte with 1:2 for Co (II), Zn (II), and Zr (IV) and 1:3 for Fe (III), Y (III), and La (III). The results of magnetic moment measurements supported paramagnetic for some complexes (Fe (III), Co (II) and Cu (II)) and diamagnetic phenomena for the other complexes (Y (III), Zr (IV) and La (III)). Thermodynamic parameters such as energy of activation E*, entropy ΔS*, enthalpy ΔH* and Gibss free energy ΔG* were calculated using Coats-Redfern and Horowitz-Metzeger methods at n = 1 or n#1. Some results of bioactivity tests for ligands and their metal complexes were recorded against Gram-positive, Gram-negative bacteria and antifungal. The complexes showed significant more than free ligand.     

Separation and direct UV detection of lanthanides complexed with cupferron by capillary electrophoresis

Separation and detection of lanthanides by capillary zone electrophoresis in the presence of cupferron (N-nitroso-N-phenylhydroxylamine) as UV absorbing complexing agent were investigated. The resolution of partially complexed positively charged cupferron complexes is improved by using a buffer ligand competing with cupferron for metal ions. When hydroxyisobutyric acid (HIBA) is used as buffer and competing ligand, it provides complete separation of all 14 lanthanides with good peak shapes. An on-column separation of 14 lanthanides was achieved in only 7 min using 0.1 mmol/l cupferron, 15 mmol/1 HIBA at pH 4.9. The separation efficiencies for the optimum separation condition are between 77,000 and 208,000 theoretical plates. Determination of lanthanide complexes was performed by direct UV detection at 210 nm. Detection limits (signal-to-noise ratio=3) are ca. 0.24-0.47 microg/ml for lanthanides. Under optimum conditions, the complete separation of thorium and uranium from mixed lanthanides was achieved.     

Aqueous chemistry of the vanadium(III) (V(III)) and the V(III)-dipicolinate systems and a comparison of the effect of three oxidation states of vanadium compounds on diabetic hyperglycemia in rats

The aqueous vanadium(III) (V(III)) speciation chemistry of two dipicolinate-type complexes and the insulin-enhancing effects of V-dipicolinate (V-dipic) complexes in three different oxidation states (V(III), V(IV), and V(V)) have been studied in a chronic animal model system. The characterization of the V(III) species was carried out at low ionic strength to reflect physiological conditions and required an evaluation of the hydrolysis of V(III) at 0.20 M KCl. The aqueous V(III)-dipic and V(III)-dipic-OH systems were characterized, and complexes were observed from pH 2 to 7 at 0.2 M KCl. The V(III)-dipic system forms stable 1:2 complexes, whereas the V(III)-dipic-OH system forms stable 1:1 complexes. A comparison of these complexes with the V-pic system demonstrates that a second ligand has lower affinity for the V(III), presumably reflecting bidentate coordination of the second dipic(2)(-) to the V(III). The thermodynamic stability of the [V(III)(dipic)(2)](-) complex was compared to the stability of the corresponding V(IV) and V(V) complexes, and surprisingly, the V(III) complexes were found to be more stable than anticipated. Oral administration of three V-dipicolinate compounds in different oxidation states {H[V(III)(dipic)(2)H(2)O].3H(2)O, [V(IV)Odipic(H(2)O)(2)].2H(2)O, and NH(4)[V(V)O(2)dipic]} and the positive control, VOSO(4), significantly lowered diabetic hyperglycemia in rats with streptozotocin-induced diabetes. The diabetic animals treated with the V(III)- or V(IV)-dipic complexes had blood glucose levels that were statistically different from those of the diabetic group. The animals treated with the V(V)-dipic complex had the lowest blood glucose levels of the treated diabetic animals, which were statistically different from those of the diabetic group at all time points. Among the diabetic animals, complexation to dipic increased the serum levels of V after the administration of the V(V) and V(IV) complexes but not after the administration of the V(III) complex when data are normalized to the ingested dose of V. Because V compounds differing only in oxidation state have different biological properties, it is implied that redox processes must be important factors for the biological action of V compounds. We observe that the V(V)-dipic complex is the most effective insulin-enhancing agent, in contrast to previous studies in which the V(IV)-maltol complex is the most effective. We conclude that the effectiveness of complexed V is both ligand and oxidation state dependent.     

Capillary electrophoresis method for the analysis of inorganic anions, organic acids, amino acids, nucleotides, carbohydrates and other anionic compounds.

A previously developed capillary zone electrophoresis (CZE) method with indirect UV detection for the simultaneous determination of inorganic and organic anions, amino acids and carbohydrates using 20 mM 2,6-pyridinedicarboxylic acid (PDC) as the background electrolyte was extended to allow determination of 206 anions including those above--mentioned and physiological amino acids, nucleotides, aromatic acids, haloacetic acids, alcohols, phosphorylated saccharides, oxyhalides, metal oxoacids, metal-ethylenediaminetetraacetic acid (EDTA) complexes, forensic anions, Good's buffers and herbicides. Every compound could be analyzed and their electrophoretic mobility determined simply by selecting detection wavelength. This method is simple and universal for anion analysis, and could be readily applied to the simultaneous determination of anionic compounds. In this work, it was used to identify and quantify important anions in sea urchin and sake.     

Direct fluorescence detection of ultratrace lanthanide(III) ions complexed with aromatic polyaminocarboxylate, avoiding quenching of ligand-centered emission, using capillary zone electrophoresis with a ternary complexing technique

The ultratrace level detection and the separation of lanthanide ions (Ln3+) were achieved using capillary zone electrophoresis with laser induced fluorescent detection (CZE-LIF) using an aromatic polyaminocarboxylate ligand synthesized in our previous work. The ligand forms kinetically stable Ln complexes at the pre-capillary derivatizing step. It effectively avoids quenching processes of the ligand-centered fluorescence through complexation with Ln3+ without paramagnetic and heavy atom effects because of the distance between the chelating and the antenna moieties. During the on-capillary separation step, the mother Ln complexes competitively form ternary complexes with the auxiliary ligands, iminodiacetate and citrate, which provide different mobilities for each of the Ln3+ complexes. The emissively labeled Ln3+ complexes were efficiently separated, based on the ternary complex equilibrium. Since the carrier buffer employed was free from emissive ligands, a high signal to noise ratio was obtained. A lower detection limit of 9.1 x 10(-11) mol dm(-3) (15.6 ng dm(-3), 0.46 attomole as an amount basis) was successfully achieved typically for Lu3+ with a simple CZE mode. We propose a combination of a pre-capillary and an on-capillary complexing technique as a method that provides both high sensitivity and high resolution.