Asymmetric [2 + 1] Cycloaddition Reactions of 1-Seleno-2-silylethene

The reaction of (E)-1-(phenylseleno)-2-(trimethylsilyl)ethene (1) and vinyl ketones 2a-d in the presence of a chiral Lewis acid prepared from TiCl(4), Ti(O(i)Pr)(4), (R)- or (S)-1,1'-binaphthol (BINOL), and MS4A gave enantiomerically enriched cis cyclopropane products 3a-d. The enantiomeric excess and chemical yield varied depending on the ratio of TiCl(4) and Ti(O(i)Pr)(4) to 1. Reproducible results (43-47% ee/33-41% yields) for cis-1-acetyl-2-[(phenylseleno)(trimethylsilyl)methyl]cyclopropane (3a) were obtained using 1.1 equiv of TiCl(4), 0.54-0.65 equiv of Ti(O(i)Pr)(4), and 1.65 equiv of BINOL. The observed enantioselectivity was explained by consideration of the structure of the postulated intermediates, alkoxy titanium-carbonyl complexes, via ab initio MO calculations.     

Hydrothermal synthesis method of 5-(4'-methylbiphenyl-2-yl)-1H-tetrazole

A clean and safe synthesis method of 5-(4’-methylbiphenyl-2-yl)-1H-tetrazole was found:under hydrothermal conditions,1.2 equiv.of 4’-methylbiphenyl-2-carbonitrile react with 1 equiv.of sodium azide in a mixed solvent of propane-1,2-diol/H2O,with 1.5 equiv.of ammonium chloride and 0.2 equiv.of ammonium fluoride as catalyst.After simple post-processing,the yield can be improved to 95%,and the purity of the product is 99%without further recrystallization.     

Novel synthesis of 1-aryl-1-trifluoromethylallenes

3,3-Bis(phenylthio)-1,1,1,2,2-pentafluorobutane 1 was reacted with aryllithium reagents (6 equiv) in ether at low to room temperature for 1-6 h to provide 2-aryl-1,1,1-trifluoro-3-phenylthio-2-butene 2 in 80-96% yields. Bromination of 2 with NBS in acetonitrile at reflux for 1-7 h afforded the corresponding allylic bromides 3 in 61-96% yields. Treatment of 3 with MCPBA (1.5 equiv) in methylene chloride at reflux temperature for 1-12 h resulted in the formation of 1-aryl-1-trifluoromethylallenes 4 in 74-96% yields.     

Pd(II)-mediated coupling of 1,1-dimethyl-2-propynyl acetate with itself and 1-decene

Heating 1,1-dimethyl-2-propynyl acetate (1) with PdCl₂(MeCN)₂ (0.05–0.1 mol equiv) and MeCN alone afforded (E)-2,7-dimethylocta-2,4,6-trien-3,6-diyl diacetate (2) (yield ca. 20%) and with 1-decene (7 mol equiv) present (E)-2-methyltetradeca-2,4-dien-3-yl acetate (7) (30%) together with 2 (12%).     

Unexpected product distributions in the synthesis of 2,6-bis-(indazolyl)pyridine and 2-(pyrazol-1-yl)-6-(indazolyl)pyridine

Reaction of 2-bromopyridine with 2 equiv of sodium indazolide in diglyme at 140 °C affords 2,6-bis-(indazol-1-yl)pyridine and 2-(indazol-1-yl)-6-(indazol-2-yl)pyridine in purified yields of 24% and 68% respectively. A similar reaction, using 1 equiv of sodium indazolide at 70 °C, gives a low-yield mixture of 2-(indazol-1-yl)-6-bromopyridine and 2-(indazol-2-yl)-6-bromopyridine. Both these intermediates are transformed into 2-(pyrazol-1-yl)-6-(indazol-1-yl)pyridine and 2,6-di(pyrazol-1-yl)pyridine upon treatment with 1 equiv of sodium pyrazolide in diglyme at 140 °C. These observations imply that the indazolyl group is a leaving group comparable to a bromo substituent under nucleophilic attack by pyrazolide or indazolide ions under these conditions. No reaction was observed between 2-(pyrazol-1-yl)-6-bromopyridine and 1 equiv of sodium indazolide under the same conditions. A single crystal structure of its iron(II) complex confirmed the regiochemistry of 2,6-bis-(indazol-1-yl)pyridine, and revealed significant conformational flexibility in the distal ligand indazolyl groups.     

Synthesis of 2-alkylidenecyclopentanones via palladium-catalyzed carbopalladation/ring expansion of 1-(1-alkynyl)cyclobutanols

The palladium-catalyzed cross-coupling of aryl halides or vinylic halides or triflates and 1-(1-alkynyl)cyclobutanols affords good yields of stereoisomerically pure 2-arylidene- or 2-(2-alkenylidene)cyclopentanones, respectively. The process involves (1) oxidative addition of the organic halide or triflate to Pd(0), (2) regioselective, intermolecular carbopalladation of the carbon-carbon triple bond of the 1-(1-alkynyl)cyclobutanol to produce a vinylic palladium intermediate, (3) regioselective ring expansion to a palladacycle, and (4) reductive elimination of the 2-alkylidenecyclopentanone with simultaneous regeneration of the Pd(0) catalyst. Generally, the best results are obtained by employing 10 mol % of Pd(OAc)(2), 20 mol % of PPh(3), 2 equiv of the aryl or vinylic iodide or vinylic triflate, 2 equiv of diisopropylethylamine, and n-Bu(4)NCl in DMF as the solvent.     

Potassium hydroxide-mediated novel rearrangement of 2-alkyl-sulfonyl-2-arylsulfonyl-1-phenylethanones to 1-aryl-2-(arylsulfonylmethanesulfonyl)ethanones

Treatment of a solution of a mixture of 1-aryl-2-arylsulfonylethanones 9 and alkylsulfonyl chlorides (1.5-2.0 equiv) in THF at 0 degree C with potassium hydroxide (8 equiv) for 10 min gave a rearrangement product, i.e., 1-aryl-2-(arylsulfonylmethanesulfonyl)ethanones 8, in excellent yields. Regiospecific methyl- and ethylation at the methylene carbon sandwiched between two sulfonyl groups of 8 could be achieved by the reactions of 7i-j with LDA (1 equiv) in THF at room temperature, respectively.     

Direct synthesis of magnesium porphine via 1-formyldipyrromethane

The reaction of 1-formyldipyrromethane (100 mM) in toluene at 115 degrees C containing DBU (10 mol equiv) and MgBr2 (3 mol equiv) in the presence of air affords the magnesium chelate Mg(II) porphine in 30-40% yield. The advantages of the new method include simplicity, high concentration, chromatography-free purification, gram-scale synthesis, and avoidance of the poorly soluble free base porphine. Mg(II) porphine exhibits good solubility in common organic solvents and is a valuable core scaffold for derivatization.     

Convenient synthesis of alkylhydrazides by the cobalt-catalyzed hydrohydrazination reaction of olefins and azodicarboxylates

Treatment of olefins 2 with 1.5 equiv of di-tert-butyl azodicarboxylate (3), 1 equiv of PhSiH3, and 1.5-5 mol % of the simple Co(III) catalyst 1 in ethanol at 23 degrees C affords the Markovnikov hydrazide product for a broad range of olefins in 62-94% yield.     

碳酸铯催化下端炔碘化合成炔基碘

催化量的碳酸铯(0.2 equiv.)、氢氧化钾(2.0 equiv.)及端炔(1.0 equiv.)在无水THF-HMPA中, 室温搅拌3 h, 然后加入碘的THF溶液, 室温搅拌2 h, 生成炔基碘. 产率为70%～93%.     

9-Acylation of 1-acyldipyrromethanes containing a dialkylboron mask for the alpha-acylpyrrole motif

1,9-Diacyldipyrromethanes are important precursors to porphyrins, yet synthetic access remains limited owing to (1) poor conversion in the 9-acylation of 1-acyldipyrromethanes and (2) handling difficulties because acyldipyrromethanes typically streak upon chromatography and give amorphous powders upon attempted crystallization. A reliable means for converting a dipyrromethane to a 1-acyldipyrromethane-dialkylboron complex was recently developed, where the dialkylboron (BR(2)) unit renders the complex hydrophobic and thereby facilitates isolation. Herein a refined preparation of 1,9-diacyldipyrromethanes is presented that employs the 1-acyldipyrromethane-BR(2) complex as a substrate for 9-acylation. The dialkylboron unit provides protection for the alpha-acylpyrrole unit. 9-Acylation requires formation of the pyrrolyl-MgBr reagent and the presence of 1 equiv of a nonnucleophilic base to quench the proton liberated upon alpha-acylation. Reaction of the 1-acyldipyrromethane-BR(2) complex (1 equiv) with mesitylmagnesium bromide (2 equiv) followed by the addition of an acylating agent (S-2-pyridyl thioate or acid chloride, 1.1 equiv) gives the corresponding 1,9-diacyldipyrromethane-BR(2) complex. The acylation method afforded 1,9-diacyldipyrromethane-BR(2) complexes with limited or no chromatography in yields of 64-92%. The 1,9-diacyldipyrromethane-BR(2) complexes are stable to routine handling, are readily soluble in common organic solvents, crystallize readily, and can now be prepared in multigram quantities through use of stoichiometric quantities of reagents.     

Direct formation of cyclobutenylphosphonates from 1-alkynylphosphonates and Cp2ZrCl2/2EtMgCl/2CuCl

Zirconacycles 2 prepared from 1-alkynylphosphonates 1, zirconocene dichloride, and 2 equiv of EtMgCl are smoothly converted into cyclobutenylphosphonates 3 when treated with two equiv of CuCl in 65-81% isolated yield. The reaction is specific and general only for zirconacyclopentenyl phosphonates.     

Analysis of an asymmetric addition with a 2:1 mixed lithium amide/n-butyllithium aggregate

A 2:1 lithium amide/ n-butyllithium aggregate 1 is investigated as an asymmetric addition template in hydrocarbon solvents. Several different chiral lithium amides were synthesized from l-valine and tested in the asymmetric addition of n-BuLi to various aldehydes. Enantiomeric excesses up to 83% were obtained in the case of the addition of n-BuLi to pivaldehyde at -116 degrees C in pentane. (1)H and (13)C INEPT DOSY were utilized to characterize a new trimeric complex 12 between 2 equiv of lithium amide and 1 equiv of lithium alkoxide. This mixed aggregate strongly indicates the possibility of product-induced chirality inhibition that is detrimental to the enantioselectivity of asymmetric addition reaction.     

Novel cyclization reaction of 1,omega-diiodo-1-alkynes without the loss of iodine atoms

In the presence of 1-hexynyllithium (0.2-0.6 equiv.), 1,omega-diiodo-1-alkynes undergo a new type of cyclization reaction without the loss of two iodine atoms to afford (diiodomethylene)cycloalkanes.     

Asymmetric hydrovinylation of 1-vinylcycloalkenes. Reagent control of regio- and stereoselectivity

1-Vinylcycloalkenes undergo highly regio- and enantioselective (>98% ee) 1,4-hydrovinylation (HV) when treated with ethylene (1 atm) at room temperature in the presence of [(S,S)-2,4-bis-diphenylphosphinopentane (BDPP)]CoCl(2) (0.05 equiv) and methylaluminoxane. The minor 1,2-HV products, seen only in 1-vinylcyclohexene (~15%) and 1-vinylcycloheptene (2%), are formed as racemic mixtures. The corresponding Ni(II)-catalyzed HV reactions of these substrates give mostly the 1,2-adducts. Racemic 4-tert-butyl-1-vinylcyclohexene, when treated with Co[(S,S)-(BDPP)]Cl(2) and ethylene, undergoes a rare enantiodivergent reaction giving two diastereomers each in >98% ee.     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

Specificity of the reaction of (−)-1-{(1S,2R,4R)-1-ethenyl-2-hydroxy-7,7-dimethylbicyclo[2.2.1]hept-2-yl}xethanone with ethenylmagnesium bromide

Ethenylmagnesium bromide (1.5 equiv) forms a chelate with (?)-1-{(1S,2R,4R)-1-ethenyl-2-hydroxy-7,7-dimethylbicyclo[2.2.1]hept-2-yl} ethanone in THF and promotes its fast primary α-ketol rearrangement into 1-ethenyl-2-hydroxy-2,8,8-trimethylbicyclo[3.2.1]octan-3-one. The latter reacts with excess magnesium reagent (0.5 equiv) according to common 1,2-addition pattern at the carbonyl group and is simultaneously involved in the second α-ketol rearrangement which leads to 1-ethenyl-3-hydroxy-3,8,8-trimethylbicyclo[3.2.1]octan-2-one as thermodynamically more stable regioisomer.     

Novel and convenient synthesis of substituted quinolines by copper- or palladium-catalyzed cyclodehydration of 1-(2-aminoaryl)-2-yn-1-ols

A general and convenient synthesis of substituted quinolines by regioselective copper- or palladium-catalyzed 6-endo-dig cyclization-dehydration of 1-(2-aminoaryl)-2-yn-1-ols is reported. The crude substrates were easily obtained by the Grignard reaction between the appropriate alkynylmagnesium bromide and 2-aminoaryl ketones and could be used without further purification for the subsequent cyclization step. Heteroannulation reactions were carried out in MeOH or DME as the solvent at 60 or 100 degrees C in the presence of CuCl(2) or PdX(2) (in conjunction with 10 equiv of KX, X = Cl, I) as the catalyst to afford the quinoline derivatives in good to excellent isolated yields based on starting 1-(2-aminoaryl)-2-yn-1-ols (66-90%).     

Base-Catalyzed Intramolecular Cycloaddition of Dialkyl(4-hydroxybut-2-yn-1-yl)[3-(4-bromophenyl)prop-2-yn-1-yl]ammonuim Chlorides and Recyclization of the Products

Russian Journal of Organic Chemistry - Dialkyl(4-hydroxybut-2-yn-1-yl)[3-(4-bromophenyl)prop-2-yn-1-yl]ammonium chlorides in the presence of 2 equiv of potassium hydroxide at room temperature...     

Synthesis of 2-(9H-carbazol-1-yl)anilines from 2,3′-biindolyl and ketones

Twenty-nine examples of 2-(9H-carbazol-1-yl)anilines were obtained in yields from 27 to 95% by refluxing 2,3′-biindolyl (1 equiv.) and ketones (1 equiv.) in ethanolic HCl. Alkyl, cyclic, and aryl ketones were found to be compatible with this method, however, aldehydes are not. Because the reaction proceeds by addition of the carbonyl C atom to the biindolyl 3-position, this method has high regioselectivity. One example is presented of bridging the two N atoms in the carbazolylaniline product with an acetaldehyde synthon to give a benzodiazepino[lm]carbazole. Also, one example is given of installing a dimethylamino group at the α-position of the starting ketone to give an indolo[3,2-c]carbazole.