Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.     

Metal‐Free Arylation of Oxygen Nucleophiles with Diaryliodonium Salts

Phenols and carboxylic acids are efficiently arylated with diaryliodonium salts. The reaction conditions are mild, metal free, and avoid the use of halogenated solvents, additives, and excess reagents. The products are obtained in good‐to‐excellent yields after short reaction times. Steric hindrance is very well tolerated, both in the nucleophile and diaryliodonium salt. The scope includes ortho‐ and halo‐substituted products, which are difficult to obtain by metal‐catalyzed protocols. Many functional groups are tolerated, including carbonyl groups, heteroatoms, and alkenes. Unsymmetric salts can be chemoselectively utilized to obtain products with hitherto unreported levels of steric congestion. The arylation has been extended to sulfonic acids, which can be converted to sulfonate esters by two different approaches. With recent advances in efficient synthetic procedures for diaryliodonium salts the reagents are now inexpensive and readily available. The iodoarene byproduct formed from the iodonium reagent can be recovered quantitatively and used to regenerate the diaryliodonium salt, which improves the atom economy.     

C‐2 Selective Arylation of Indoles with Heterogeneous Nanopalladium and Diaryliodonium Salts

A simple and efficient method to prepare synthetically useful 2‐arylindoles is presented, using a heterogeneous Pd catalyst and diaryliodonium salts in water under mild conditions. A remarkably low leaching of metal catalyst was observed under the applied conditions. The developed protocol is highly C‐2 selective and tolerates structural variations both in the indole and in the diaryliodonium salt. Arylations of both N?H indoles and N‐protected indoles with ortho‐substituted, electron‐rich, electron‐deficient, or halogenated diaryliodonium salts were achieved to give the desired products in high to excellent isolated yields within 6 to 15 h at room temperature or 40 °C.     

Transition‐Metal‐Free N‐Arylation of Pyrazoles with Diaryliodonium Salts

A new synthetic method was developed for the N‐arylation of pyrazoles using diaryliodonium salts. The transformation does not require any transition‐metal catalyst and provides the desired N‐arylpyrazoles rapidly under mild reaction condition in the presence of aqueous ammonia solution as a mild base without the use of inert atmosphere. The chemoselectivity of unsymmetric diaryliodonium salts was also explored with large number of examples.     

Copper‐Catalyzed Enantioselective Arylative Desymmetrization of Prochiral Cyclopentenes with Diaryliodonium Salts

A copper‐catalyzed enantioselective arylative desymmetrization of prochiral cyclopentenes with diaryliodonium salts was developed. In the presence of a catalytic amount of a chiral copper–bisoxazoline complex, which was generated in situ, the reaction of 4‐substituted or 4,4‐disubstituted cyclopent‐1‐enes with diaryliodonium hexafluoroarsenates afforded the chiral arylated products in good yields with excellent enantioselectivity. A cyclohexyl‐containing Box ligand was essential for the high enantioselectivity. Transformation of the enantiomerically enriched adducts into other chiral building blocks is also documented.     

Copper-catalyzed direct N-arylation of N-arylsulfonamides using diaryliodonium salts in water

An efficient copper-catalyzed N-arylation of N-arylsulfonamides with diaryliodonium salts is reported. The reaction employs diaryliodonium salts and N-arylsulfonamides in water at room temperature, giving the products in moderate to excellent yields.     

Domino N‐/C‐Arylation via In Situ Generation of a Directing Group: Atom‐Efficient Arylation Using Diaryliodonium Salts

Both aryl components of diaryliodonium salts can be used in a domino one‐pot reaction via in situ generation of a directing group. A number of heterocycles undergo N‐arylation which is followed by ruthenium‐catalyzed C‐arylation. Notably the reaction extends well to unsymmetrical diaryliodonium salts with a number of highly selective examples shown.     

Transition-metal-free synthesis of thiocyanato- or nitro-arenes through diaryliodonium salts

A transition-metal-free approach to facile synthesis of thiocyanato- and nitro-arenes was developed from KSCN (potassiumthiocyanate) or NaNO₂ with diaryliodonium salts in good yields under mild conditions. The reaction was compatible with a variety of sensitive functional substituents such as halides and nitro and ester groups. The usefulness of arylation products has been realized.     

Click Ionic Liquids: A Family of Promising Tunable Solvents and Application in Suzuki–Miyaura Cross‐Coupling

A series of click ionic salts 4 a – 4 n was prepared through click reaction of organic azides with alkyne‐functionalized imidazolium or 2‐methylimidazolium salts, followed by metathesis with lithium bis(trifluoromethanesulfonyl)amide or potassium hexafluorophosphate. All salts were characterized by IR, NMR, TGA, and DSC, and most of them can be classified as ionic liquids. Their steric and electronic properties can be easily tuned and modified through variation of the aromatic or aliphatic substituents at the imidazolium and/or triazolyl rings. The effect of anions and substituents at the two rings on the physicochemical properties was investigated. The charge and orbital distributions based on the optimized structures of cations in the salts were calculated. Reaction of 4 a with PdCl₂ produced mononuclear click complex 4 a‐Pd , the structure of which was confirmed by single‐crystal X‐ray diffraction analysis. Suzuki–Miyaura cross‐coupling shows good catalytic stability and high recyclability in the presence of PdCl₂ in 4 a . TEM and XPS analyses show formation of palladium nanoparticles after the reaction. The palladium NPs in 4 a are immobilized by the synergetic effect of coordination and electrostatic interactions with 1,2,3‐triazolyl and imidazolium, respectively.     

Electrostatic and Non‐covalent Interactions in Dicationic Imidazolium–Sulfonium Salts with Mixed Anions

A series of thioether‐functionalised imidazolium salts have been prepared and characterized. Subsequent reaction of the thioether‐functionalised imidazolium salts with iodomethane affords imidazolium–sulfonium salts composed of doubly charged cations and two different anions. Imidazolium–sulfonium salts containing a single anion type are obtained either by a solvent extraction method or by anion exchange. The imidazolium–sulfonium salts undergo a methyl‐transfer reaction on exposure to water, giving rise to a new, singly charged imidazolium salt with iodide introduced at the 2‐position of the imidazolium ring. Crystal structures of some of the imidazolium–sulfonium salts were determined by X‐ray crystallography providing the topology of the interactions between the dications and the anions. Electrospray ionization mass spectrometry and quantum‐chemical calculations were used to rationalise the relative strength of these interactions.     

One‐Pot C−H Functionalization of Arenes by Diaryliodonium Salts

A transition‐metal‐free, mild, and highly regioselective synthesis of nitroarenes from arenes has been developed. The products are obtained in a sequential one‐pot reaction by nitration of iodine(III) reagents with two carbon ligands, which are formed in situ from iodine(I). This novel concept has been extended to formation of aryl azides, and constitutes an important step towards catalytic reactions with these hypervalent iodine reagents. An efficient nitration of isolated diaryliodonium salts has also been developed, and the mechanism is proposed to proceed by a [2,2] ligand coupling pathway.     

Crystal Structures and Phase‐Transition Dynamics of Cobaltocenium Salts with Bis(perfluoroalkylsulfonyl)amide Anions: Remarkable Odd–Even Effect of the Fluorocarbon Chains in the Anion

Crystal structures and thermal properties of cobaltocenium salts with bis(perfluoroalkylsulfonyl)amide (C_nF_2n+1SO₂)₂N anions [n=0 ( 1 ), 1 ( 1 a ), 2 ( 1 b ), 3 ( 1 c ), and 4 ( 1 d )] and the 1,1,2,2,3,3‐hexafluoropropane‐1,3‐disulfonylamide anion ( 2 ) were investigated. In these solids, the cations are surrounded by four anions around their C₅ axis, and stacking of these local structures forms two kinds of assembled structures. In the salts with even n ( 1 , 1 b , and 1 d ), the cation and anion are arranged alternately to form mixed‐stack columns in the crystal. In contrast, in the salts with odd n ( 1 a and 1 c ), the cations and anions independently form segregated‐stack columns. An odd–even effect was also observed in the sum of the phase‐change entropies from crystal to melt. All of the salts exhibited phase transitions in the solid state. The phase transitions to the lowest‐temperature phase in 1 , 1 a , and 2 are accompanied by order–disorder of the anions and symmetry lowering of the space group, which results in the formation of an ion pair. Solid‐state ¹³C NMR measurements on 1 a and 1 b revealed enhanced molecular motions of the cation in the higher‐temperature phases.     

Alkali Metal and Trimethylsilyl Carbamoselenothioates – Synthesis,Structure, and some Reactions

This paper describes the synthesis and some reactions of potassium, rubidium, cesium and trimethylsilyl carbamoselenothioates. The potassium salts were synthesized in 70–80 % yields by reacting the corresponding thiocarbamoyl chlorides with potassium selenide in acetonitrile. Furthermore, the rubidium and cesium salts were obtained in good yields by treating the trimethylsilyl esters with the corresponding metal fluorides. The crystal structure of acetonitrile‐solvated potassium N,N‐dimethylcarbamoselenothioate consisted of dimeric units, featuring μ‐carbamoselenothioate anions associated with potassium cations that are located on the upper and lower sides of a plane involving two opposing carbamoselenothioate groups. These heavier alkali metal salts readily reacted with alkyl halides to give both S‐ and Se‐alkyl esters. The reaction of the potassium salts with trimethylsilyl chlorides forms S‐ and Se‐trimethylsilyl carbamoselenothioates which are in equilibrium. The reaction of the salts and silyl esters with organo Group‐14 and ‐15 elements halides gave exclusively the corresponding Se‐substituted products in good yields.     

Hypervalent‐Iodine‐Mediated Carbon–Carbon Bond Cleavage and Dearomatization of 9H‐Fluoren‐9‐ols

A transition‐metal‐free synthesis of spiro compounds from 9H‐fluoren‐9‐ols mediated by hypervalent iodine is reported. In this reaction, an unprecedented β‐carbon elimination of tertiary alkoxyliodine(III) to form new diaryliodonium salts is proposed. The obtained phenol intermediates undergo oxidative dearomatization to furnish a class of oxo‐spiro compounds. This domino reaction significantly increases the complexity of these molecules and shows excellent regio‐ and stereoselectivity.     

Ionic Liquids Based on Azolate Anions

Compartmentalized molecular level design of new energetic materials based on energetic azolate anions allows for the examination of the effects of both cation and anion on the physiochemical properties of ionic liquids. Thirty one novel salts were synthesized by pairing diverse cations (tetraphenylphosphonium, ethyltriphenylphosphonium, N‐phenyl pyridinium, 1‐butyl‐3‐methylimidazolium, tetramethyl‐, tetraethyl‐, and tetrabutylammonium) with azolate anions (5‐nitrobenzimidazolate, 5‐nitrobenzotriazolate, 3,5‐dinitro‐1,2,4‐triazolate, 2,4‐dinitroimidazolate, 4‐nitro‐1,2,3‐triazolate, 4,5‐dinitroimidazolate, 4,5‐dicyanoimidazolate, 4‐nitroimidazolate, and tetrazolate). These salts have been characterized by DSC, TGA, and single crystal X‐ray crystallography. The azolates in general are surprisingly stable in the systems explored. Ionic liquids were obtained with all combinations of the 1‐butyl‐3‐methylimidazolium cation and the heterocyclic azolate anions studied, and with several combinations of tetraethyl‐ or tetrabutylammonium cations and the azolate anions. Favorable structure–property relationships were most often achieved when changing from 4‐ and 4,5‐disubstituted anions to 3,5‐ and 2,4‐disubstituted anions. The most promising anion for use in energetic ionic liquids of those studied here, was 3,5‐dinitro‐1,2,4‐triazolate, based on its contributions to the entire set of target properties.     

Iron‐catalyzed carbon–sulfur bond formation: Atom‐economic construction of thioethers with diaryliodonium salts

Diaryliodonium salts are characterized by poor atom economy with the formation of one equivalent of an iodoarene as waste. We have developed an atom‐economic iron‐catalyzed protocol for the synthesis of a variety of thioethers with diaryliodonium salts. Not only cyclic diaryliodonium salts but also linear diaryliodonium salts were found to perform well in the reactions.     

Metal‐Free One‐Pot Synthesis of Benzofurans

Ethyl acetohydroxamate was efficiently arylated with diaryliodonium salts at room temperature under transition‐metal‐free conditions. The obtained O‐arylated products were reacted in situ with ketones under acidic conditions to yield substituted benzo[b]furans through oxime formation, [3,3]‐rearrangement, and cyclization in a fast and operationally simple one‐pot fashion without using excess reagents. Alternatively, the O‐arylated products could be isolated or transformed in situ to aryloxyamines or O‐arylaldoximes. The methodology was applied to the synthesis of Stemofuran A and the formal syntheses of Coumestan, Eupomatenoid 6, and (+)‐machaeriol B.     

2-炔基苯胺与二芳基碘鎓盐的选择性芳基化/环化串联反应

有机高价碘试剂是一类环境友好、制备简单且性质温和的有机合成新试剂。近年来,有机高价碘试剂因表现出新颖、独特的反应性能而受到化学工作者广泛关注,成为有机合成重要研究领域之一。二芳基碘鎓盐是有机高价碘试剂的一个重要组成部分,是一类具有较高普适性的芳基化试剂,可用于羰基化合物、烯烃、炔烃和杂原子亲核化合物等的芳基化反应。目前,二芳基碘鎓盐作为芳基化试剂对具有单一芳基化位点化合物的芳基化已经有了非常广泛而深入的研究。对于具有两个甚至多个芳基化位点的化合物(如同时具有胺基和炔基),其芳基化选择性问题仍缺乏系统研究。特别是在多个芳基化位点共存时如何能够使芳基化发生在某一特定位点仍然是一大难题。这限制了二芳基碘鎓盐作为芳基化试剂更广泛的应用。因此,我们选用2-炔基苯胺(含有胺基和炔基两个芳基化位点)作为原料,通过溶剂的选择以及溶液酸碱性的调控来改变不同芳基化位点的反应活性,通过催化剂的调变来改变二芳基碘鎓盐芳基化反应的能力,从而找出最优条件实现底物分子的选择性芳基化反应,并利用剩余活性位点实现分子内的环化反应,从而实现芳基化-环化串联反应合成一系列N-芳基吲哚类化合物。在对模型底物进行条件筛选实验时发现,以2-乙基辛酸铜(Cu(OCOC8H17)2)作催化剂,二异丙基乙基胺(DIPEA)作碱,1,2-二氯乙烷(DCE)为溶剂,反应以最高93%的收率得到1,2-二苯基吲哚。使用该最优反应条件,一系列2-炔基苯胺都能与二芳基碘鎓盐很好地发生反应并且以良好到优秀的产率(71%–98%)得到目标产物N-芳基吲哚。此外,2-炔基苯胺与非对称的二芳基碘鎓盐也能发生反应,实验结果证明为位阻较小的芳基对胺基进行了N-芳基化反应。通过空白实验和对比实验,我们提出了可能的反应机理：二芳基碘鎓盐在铜催化剂作用下转化为亲电性的芳基活性中间体,该中间体与底物的胺基发生芳基化反应,然后芳基化产物在铜催化剂作用下环化生成N-芳基吲哚。该反应很好地解决了同时具有胺基和炔基两个芳基化位点的底物与二芳基碘鎓盐反应时C-芳基化和N-芳基化的竞争问题,选择合适反应条件使N-芳基化反应优先进行,为二芳基碘鎓盐的选择性芳基化反应提供了很好的实例,并为其它具有多个芳基化位点化合物的选择性芳基化反应提供了途径。     

Generation of Aryl Radicals through Reduction of Hypervalent Iodine(III) Compounds with TEMPONa: Radical Alkene Oxyarylation

A novel method for selective generation of aryl radicals from diaryliodonium salts and iodanylidene malonates with sodium 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPONa) as a single‐electron transfer (SET) reducing reagent is described. In the presence of various alkenes, aryl radicals formed after SET‐reduction of hypervalent iodine compounds undergo alkene addition and the adduct radicals that are thus generated are efficiently trapped by the concomitantly generated TEMPO radical to eventually afford oxyarylated products in moderate to very good yields. The efficiency of aryl radical generation of various iodine(III) reagents is studied and the generation of an iodanylidene malonate aryl radical is also investigated by computational methods.     

Hypervalent Iodine in Synthesis XXX: Palladium-Catalyzed Reaction of Diaryliodonium Salts with β-substituted-α, β-enones

The reaction of diaryliodonium salts with β-substituted-α,β-enones in the presence of a palladium catalyst affords H_β-substituted products with excellent yields.