Supported metallocene catalysts—interactions of (n-BuCp)2HfCl2 with methylaluminoxane and silica

The species on supported olefin polymerisation catalysts consisting of (n-BuCp)₂HfCl₂, methylaluminoxane (MAO) and dehydroxylated silica were identified by EXAFS and UV-Vis spectroscopy. Whereas the reaction of (n-BuCp)₂HfCl₂ with silica leads to a product containing HfO and HfSi non-bonded interactions with concurrent loss of Hf---Cl bonds, the reaction of (n-BuCp)₂HfCl₂ with silica pretreated with methylaluminoxane yields a mixture of several hafnocene species. The bonding features of (n-BuCp)₂HfCl₂ and (n-BuCp)₂HfCl₂/SiO₂ are still present to some extent but with new interactions consistent with hafnocene cation formation. The relative proportions of these species depend strongly on the method of the catalyst preparation.     

La-NMR-spektroskopie an allyllanthan(III)-komplexen

¹³⁹La-NMR chemical shifts were measured for several anionic complexes of formulae Li(C₄H₈O₂)_3/2 [La(ν³-C₃H₅)₄], [Li(C₄H₈O₂)₂][Cp′_nLa(ν³-C₃]H₅)_4−n] (Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 and Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) and Li[R_nLa(ν³-C₃H₄)₄−n] (R = N(SiMe₃)₂; n = 1, 2 and R = CCsIMe₃; n = 4), as well as for neutral compounds for formulae La(ν³-C₃H₅)₃L_n (L = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_nLa(ν³-C₃H₅)_3−n (Cp′= Cp(ν⁵-Cp₅H₅), Cp *(ν⁵-C₅Me₅); n = 1, 2) and La(ν³-C₃H₂)₂X(THF)₂ X = Cl, Br, I). Typical ranges of the ¹³⁹La-NMR chemical shifts were found for the different types of complex independent of number and kind of organyl groups directly bonded to lanthanum.

Zusammenfassung

¹³⁹La-NMR-Spektroskopie wurde an einer Reihe anionischer Allyllanthanat(III)-Komplexe der Zusammensetzung ]- [La)ν³-C₃H₅)₄, [Li(C₄H₈)₂][Cp′_nLa(ν³-C₃H₅)_4−n(Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 und Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) und Li[R_nLa(ν³-C₃H₅)_4−n (R = B(SiMe₃)₂; n = 1, 2 und R = CCSiMe₃; n = 4 sowie neutraler Allyllanthan(III)-Komplexe der Zusammensetzung La(ν³-C₃H₅)₃L_n (L_n = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_n, La(ν³-C₃H₅)_3−n (Cp′ = Cp(ν⁵-C₅H₅), Cp * (ν⁵- Cp₅Me₅); n = 1, 2) und La(ν³-Cp₃H₅)₂X(THF)₂ (X = Cl, Br, I) durchgefürt. In Abhängikeit von der Anzahl und der Art der am Lanthan gebundenen Gruppen wurden für die verschieden Komplextypen charakteristische Resonanzbereiche ermittelt.     

Synthesis and characterization of Na5[Co(CO)3(P{(CH2)nC6H4-P-SO3}3)2], n = 1, 2, 3, and 6. Novel zwitterion

The electron donating water soluble phosphines, P{(CH₂)nC₆H₄-p-SO₃Na}₃,n = 1, 2, 3 and 6, react rapidly with Co₂(CO)₈ under two phase reaction conditions to yield the disproportionation products, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃Na₃}₂] [Co(CO)₄]. Selective precipitation yields the formally zwitterionic complex anions as the sodium salt, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃} ₃)₂]⁵⁻. The anions can be used as precursors to water soluble cobalt hydroformylation catalysts under two phase and supported aqueous phase conditions. The tendency to form alcohol products is low with these complexes. The behavior of the catalysts is consistent with an active species that remains water soluble during the reaction and is not leached into the nonaqueous phase.     

Ergebnisse aus versuchen zur darstellung von bis(trifluormethylsulphanyl)thioketen (CF3S)2C=C=S

The attempted preparation of bis(trifluoromethylsulphanyl)thioketene is described. Mono-and di-(trifluoromethylsulphanyl)-substituted orthothioesters may be prepared fromCH₃C(SC₂H₅)₃ and CF₃SCl in the presence of anhydrous ZnCl₂. The unstable compoundshave been isolated and characterized. The corresponding CF₃Se and CF₃SO₂ derivativesare only formed as intermediates which decompose to ketene diethylmercaptal. Suchmono- and di-substituted products are obtained in good yield from H₂C=C(SC₂H₅)₂ andCF₃ECl (E=S, Se). The reaction of H₂C=C(SC₂H₅)₂ with CF₃SO₂F gave only poor yieldsof (CF₃SO₂)_nCH_2−n=C(SC₂H₅)₂ (n=1, 2) which were only capable of characterizationin etheral solution by spectral means. Attempts to prepare (CF₃S)₂C=C=S by refluxing(CF₃S)₂CHC(O)Cl, (CF₃S)₂CHC(O)OH or (CF₃S)₂C=C=O with P₄S₁₀ in toluene yieldedonly the cyclic dimer and the corresponding 1,3,4-trithiolan.     

有序介孔Ru-MgZr复合氧化物合成及催化亚油酸异构化性能

筛选高效、高选择性多相催化剂异构化亚油酸是共轭亚油酸(CLA)研究的重点。 本文采用溶剂挥发自组装改进的溶胶-凝胶法,合成有序介孔Ru掺杂的MgO-ZrO₂固体碱催化剂。 考察了催化剂中不同Mg物质的量对催化剂孔径、比表面积和表面碱性以及Ru等的结构和性能对催化性能的影响。 对比了催化剂的形貌、表面碱性及Ru组分对催化性能的影响程度。 结果表明,n(Zr)∶n(Mg)=3∶1时,Ru掺杂的MgO-ZrO₂固体碱催化剂具有高度有序的介孔结构和高的比表面积。 而n(Zr)∶n(Mg)=1∶1时, MgO-ZrO₂固体碱催化剂合成CLA产率较高,反应时间4 h,产率达到85%,催化效率为0.099 g(CLA)·L^-1(solvent)·min^-1,并且催化产物主要为具有生物活性的3种共轭亚油酸异构体。 催化剂的强碱性位点和晶格Ru是催化异构化反应的两个活性位点,强碱性位点是提高催化性能的关键。 固体碱复合氧化物催化效率高、制备方法简单、反应产物生物活性高等优点,具有较好的应用前景。     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.     

Electron transfer of quinone self-assembled monolayers on a gold electrode

Dialkyl disulfide-linked naphthoquinone, (NQ-C_n-S)₂, and anthraquinone, (AQ-C_n-S)₂, derivatives with different spacer alkyl chains (C_n: n = 2, 6, 12) were synthesized and these quinone derivatives were self-assembled on a gold electrode. The formation of self-assembled monolayers (SAMs) of these derivatives on a gold electrode was confirmed by infrared reflection-absorption spectroscopy (IR-RAS). Electron transfer between the derivatives and the gold electrode was studied by cyclic voltammetry. On the cyclic voltammogram a reversible redox reaction between quinone (Q) and hydroquinone (QH₂) was clearly observed under an aqueous condition. The formal potentials for NQ and AQ derivatives were −0.48 and −0.58 V, respectively, that did not depend on the spacer length. The oxidation and reduction peak currents were strongly dependent on the spacer alkyl chain length. The redox behavior of quinone derivatives depended on the pH condition of the buffer solution. The pH dependence was in agreement with a theoretical value of E_1/2 (mV) = E′ − 59pH for 2H⁺/2e⁻ process in the pH range 3–11. In the range higher than pH 11, the value was estimated with E_1/2 (mV) = E′ − 30pH , which may correspond to H⁺/2e⁻ process. The tunneling barrier coefficients (β) for NQ and AQ SAMs were determined to be 0.12 and 0.73 per methylene group (CH₂), respectively. Comparison of the structures and the alkyl chain length of quinones derivatives on these electron transfers on the electrode is made.     

Protonation and hydrogenation of triosmium clusters containing the bridging diphosphine ligands Ph2P(CH2nPPh2 (n = 1 to 4)

Members of the series of bridging diphosphine clusters [Os₃(CO)₁₀(diphos)] where diphos = Ph₂P(CH_2nPPh₂ [dppm (n = 1), dppe (n = 2), dppp (n = 3), or dppb (n = 4)] show interesting differences in their reactivity towards H⁺ and H₂. Protonation leads to [Os₃(μ-H)(CO)₁₀(diphos)]⁺ with the hydrides bridging the same osmium atoms as the diphos ligand when diphos is dppe, dppp, or dppb, whereas the hydride and dppm bridge different edges in [Os₃9μ-H)(CO)₁₀(dppm)]⁺. Hydrogenation of the 1,2-diphos compounds leads to [Os₃(μ-H)₂(CO)₈(diphos)] (diphos = dppm, dppe, dppp) in good to excellent yield but the dppb analogue could not be made. Geometric and electronic factors affecting the ability to incorporate hydride ligands in these clusters are discussed.     

An efficient closed-shell singles and doubles coupled-cluster method

A reformulated set of equations for the closed-shell singles and doubles coupled-cluster (CCSD) method is presented. A computational cost of n_v⁴n₀²+7n_v³n₀³+1n_v²n₀⁴ for the n⁶ steps is obtained, where n_v is the number of virtual molecular orbitals included in the CCSD procedure, n₀ is the number of doubly occupied molecular orbitals and n=n₀+n_v. Test calculations for the cis and trans isomers of FNNF and planar and pyramidal CH₃⁻ are presented. Equilibrium structures determined with large Gaussian basis sets at the second-order Møller-Plesset (MP2) perturbation level of theory are reported and used for the other electron correlation methods. With the largest one-particle basis set (144 contracted Gaussian functions), the equilibrium geometries of cis- and trans-FNNF agree with experiment. Based on analyses of planar and pyramidal CH₃⁻ wavefunctions and the calculated inversion barrier, it is suggested that the molecular anion may not exist in a planar configuration but that autodetachment of an electron occurs before the transition state is reached. Comparisons of our new CCSD procedure demonstrate that coupled-cluster methods are not significantly more expensive than similar electron correlation techniques.     

Density functional theory analysis of CaRgn complexes: (Rg=He, Ne, Ar; n=1–4)

CaRg_n⁺ (Rg=He, Ne, Ar) complexes with n=1–4, are investigated by performing using the B3LYP/6-311+G (3df) density functional theory calculations. The CaHe_n⁺ (n=1–4) complexes are found to be stable. In the case of CaNe_n⁺ and CaAr_n⁺, stable structures and stationary point were found only for n=1 and 2. For n=3 in the C_3V and the D_3h point group as well as for n=4 in the T_d (tetrahedral) point group a saddle point (imaginary frequency) is observed and global minimum could be obtained along the potential energy surface.     

Synthesis and structural behavior of the P-functional organotin chlorides [Ph2P(CH2)3]2SnCl2, Ph2P(CH2)3SnCl2Me, and Ph2P(CH2)nSnCl3 (n=2, 3)

The P-functional organotin dichloride [Ph₂P(CH₂)₃]₂SnCl₂ (3) is synthesized by reaction of Ph₂P(CH₂)₃MgCl with SnCl₄ independently of the molar ratio of the starting compounds. The corresponding organotin trichlorides Ph₂P(CH₂)_nSnCl₂R (4: n=2, R=Cl; 5: n=3, R=Cl; 6: n=3, R=Me) are formed in a cleavage reaction of Ph₂P(CH₂)_nSnCy₃ (n=2, 3) with SnCl₄ or MeSnCl₃, respectively. The main features of the crystal structures of 3–6 are both intra- and intermolecular PSn coordinations and the existence of intermolecular Sn---ClSn bridges. For further characterization of the title compounds, the adducts 4(Ph₃PO)₂ (7) and 5(Ph₃PO) (8), as well as the P-oxides and P-sulfides of 3–6 (9–15), are synthesized. The results of crystal structure analyses of 7, 11, 12, and 14 are reported. The structures of 9–15 are characterized by intramolecular P=XSn interactions (X=O, S). A first insight into the structural behavior of the compounds 3–15 in solution is discussed on the basis of multinuclear NMR data.     

Viscometric and sorption equilibrium studies on n-alkane-butanone-poly-(dimethylsiloxane) systems

Intrinsic viscosities, [η], second virial coefficients, A₂, and preferential solvation coefficients, λ, for the ternary systems n-alkane (l)-butanone (2)-poly(dimethylsiloxane) (PDMS) (3), with n-alkane = n-hexane, n-heptane, n-nonane and n-undecane, have been determined at 20°. The K and a constants of the Mark-Houwink equation have been evaluated over the whole composition range of the binary solvent mixtures. Polymer (mixed solvent) interaction parameters and unperturbed dimensions have been evaluated both from A₂ and [η] data, the feasibility of A₂ evaluation from [η] experimental data or vice versa being discussed. Experimental and calculated (through Dondos and Patterson theory) excess free energies, G^E, follow similar trends with composition; large numerical discrepancies, however, arise between both sets of G^E. Maxima in [η], in a and in A₂ are accompanied by inversion points in λ. The solvent mixture composition range in which PDMS is preferentially solvated by n-alkane, as well as the extent of solvation, decrease with increasing number of carbon atoms in the n-alkane.     

Si-Kernresonanzspektren und synthese von bromdisilanen und ioddisilanen

The syntheses of Bromodisilanes Br_nSi₂H_6−n and Iododisilanes I_nSi₂H_6−n (n = 1, 2, 3, 4, 5), starting from caryldisilanes Ar_nSi₂H_6−n (Ar = phenyl, -naphthyl, mesityl) are reported. The ²⁹Si-NMR-spectra of all compounds, including ²⁹Si²⁹Si-coupling constants, have been measured.

Zusammenfassung

Ausgehend von Aryldisilanen ArS₂H_6−n, (Ar = Phenyl, -Naphthyl, Mesityl) wurden die Bromdisilane Br_nSi₂H_6−n, und Ioddisilane I_nSi₂H_6−n, (n = 1, 2, 3, 4, 5) synthetisiert. Die ²⁹Si-NMR-Spektren aller Verbindungen, (eingeschlossen ²⁹Si²⁹Si-Kopplungskonstanten) wurden vermessen.     

Investigation on lanthanide binuclear complexes of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione and 2,2′-bipyridine

The coordination of 1,5-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,5-pentanedione (BPMPPD) and 2,2′-bipyridine (bipy) with lanthanide ions in water-alcohol solution has been studied. Binuclear complexes of the types : Ln₂(BPMPPD)₃(bipy)₂·nH₂O (n = 2 for Y, n = 4 for Eu, Gd, Dy, Ho, Er, Tm and Yb); Ln₂(BPMPPD)₃bipy·nH₂O (n = 10 for La, n = 3 for Pr, Nd, Sm and Tb) were formed. The compounds were characterized by elemental analysis, molar conductance, IR, UV, ¹H NMR spectroscopy, thermogravimetric analysis and fluorescence spectra.     

Studies on the E7 liquid crystal orientations confined to perfluorinated carboxylic acid-treated cylindrical cavities of Anodisc membranes by FTIR spectroscopy

The orientation of E7 liquid crystal (LC) confined within 200 nm diameter cylindrical cavities of Anodisc membranes are investigated by FTIR dichroism techniques. The cavity walls of the confining pores were chemically modified with different length perfluorinated carboxylic acids (PCAs, C _n F_2n+1COOH, n = 3, 4, 5, 6) at 1, 3 and 5 mM concentrations. From the FTIR spectra of PCA-treated alumina Anodsic membranes, we found salt formation between the -COOH group of the PCAs and the Anodisc membranes. From the FTIR spectra of LC-filled Anodisc membranes, we found an abrupt alignment direction change, from parallel to perpendicular, of the LC molecules along the long axis of the cavities between n = 4 and n = 5 for the 1 mM concentration of PCA. However, for the 5 mM concentration of PCA, the parallel-to-perpendicular alignment direction of LC molecules changed between n = 3 and n = 4. These LC orientation changes for PCA-treated Anodisc membranes occurred at shorter length than for hydrocarbon carboxylic acid (HCA, C _n H_2n+1COOH)-treated Anodisc membranes. This change may be caused by the lower surface energy of the -(CF₂) _n CF₃ chain of PCA than that of the -(CH₂) _n CH₃ chain of HCA.     

Molecular motion and phase transition in perovskite-type (CH3)nNH4−nSnCl3 (n=1–4) studied by proton NMR spin–lattice relaxation

Powder X-ray diffraction, ¹¹⁹Sn NMR spectra, and ¹H NMR spin–lattice relaxation times, T₁, were measured for (CH₃)_nNH_4−nSnCl₃ (n=1–4). From the Rietveld analysis, it is shown that all four compounds crystallize into deformed perovskite-type structures at room temperature. The temperature dependence of ¹H T₁ was analyzed in terms of the CH₃ reorientation and other motions of the whole cation. Except for the phase transition in CH₃NH₃SnCl₃, which is from monoclinic to rhombohedral at 331 K, ¹H T₁ was continuously changed at other phase transitions in this compound as well as in the n=2–4 compounds, suggesting that the transitions are not caused by the change of the motional state of the cation but by an instability of the [SnCl₃]_nⁿ⁻ perovskite lattice.     

Dielectric studies of the hexatic B-smectic A and crystal B-smectic A transitions

Static dielectric constants, ε_∥ and ε_⊥ as well as the low frequency dielectric dispersion of ε_∥ have been studied in the vicinity of the hexatic B-smectic A transition in n-hexyl-4'-pentyloxybiphenyl-4-carboxylate (65OBC) and n-butyl-4'-hexyloxybiphenyl-4-carboxylate (46OBC) and also near the crystal B-smectic A transition in n-(4-n-butyloxybenzylidene)-4-n-octylaniline (4O. 8). While the behaviour of the dielectric anisotropy is essentially similar for both transitions, the dispersion results show significant differences.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

Synthesis, spectral properties, crystal structures and antimicrobial effects of copper(II) pyridinecarboxylate adducts with chelating ligands

The reaction of an ethanolic solution of copper(II) pyridinecarboxylates CuX₂·nH₂O (where X is nicotinate (nic) (n=0) or isonicotinate (isonic) (n=4)) with ethylenediamine (en) in a molar ratio of 1:2 lead to the isolation of solid tetragonally distorted octahedral complexes of the type [Cu(en)₂(H₂O)₂]X₂·nH₂O (n=1 for nic; n=0 for isonic). The analogous reaction of CuX₂·nH₂O with diethylenetriamine (dien) in a molar ratio of 1:1 leads to the formation of square-pyramidal pentacoordinated complexes of the type [CuX(dien)(H₂O)]X. On the other hand, the reaction of equimolar quantities of copper(II) nitrate and dien with nicotinate anions (equimolar quantities of pyridinecarboxylic acid and NaOH) in ethanolic solutions gives a solid monomeric complex [Cu(nic)(NO₃)dien)(H₂O)]·H₂O in which the coordination polyhedron around the Cu(II) atom is a (4+1+1) distorted tetragonal bipyramid. Based on the molecular structure the electronic and IR spectra are discussed. Moreover, the results of the quantitative determination of antimicrobial activity of the isonic complexes [Cu(isonic)₂(H₂O)₄], [Cu(en)₂(H₂O)₂](isonic)₂, [Cu(isonic)(dien)(H₂O)](isonic), as well as isonicotinic acid, ethylenediamine and diethylenetriamine alone are discussed.     

Sulphur containing mesogens. The mesophasic behaviour of di(4-alkyloxybenzoates) of 4,4'-dimercaptobiphenyl

A homologous series of di(4-alkyloxybenzoates) of 4,4'-dimercaptobiphenyl: CH₃(CH₂)_n-1O-C₆H₄-COS-C₆H₄-C₆H₄-SOC-C₆H₄-O(CH₂)_n-1CH₃,n=1-7, has been synthesized and the thermotropic liquid-crystalline behaviour investigated. All compounds exhibit enantiotropic mesomorphism over a remarkable temperature range. While the mesophase thermal stability is moderately higher than that found for the corresponding oxygenated analogues, the smectic stability is definitely lower. In fact, all the compounds are nematic but smectic mesomorphism (S_C) is observed for n = 7. Compounds with n = 6 or 7 exhibit enantiotropic highly ordered smectic (or disordered crystal) phases, probably S_G in type.