A highly selective fluorescence switch for Cu2+ and Fe3+ based on a new diarylethene with a triazole-linked rhodamine 6G unit

A new diarylethene compound with a triazole-linked rhodamine 6G unit attached to the imino group (1O) was designed and synthesized. According to the test results, the solution color and fluorescence color of diarylethene can be modulated by lights and metal ions. The solution color could change from colorless to light purple when irradiated with UV light. When Cu²⁺ was added to the diarylethene solution, the color of diarylethene solution became blue, the fluorescence color turned from dark to bright yellow. Although the solution color did not change by adding Fe³⁺, its fluorescence color varied from dark to yellow. Moreover, it was found that the complex ratio of the diarylethene to Cu²⁺ was 1:1 and the binding stoichiometry of the diarylethene to Fe³⁺ was also 1:1 based on the data of NMR, MS, and other experiments. Based on these findings, photochromic figure of the diarylethene with UV/Vis light, Cu²⁺ and Fe³⁺ was constructed. Furthermore, the logic circuit was designed by input signals (ultraviolet stimulus, visible light stimulus, Cu²⁺ (or Fe³⁺) and EDTA) and an output signal (fluorescent intensity at 566?nm (or 575?nm)).     

Synthesis of a new pyrene-devived fluorescent probe for the detection of Zn2+

A novel pyrene-based receptor bearing benzothiazole was synthesized as a good turn-on fluorescent sensor for the recognition of Zn²⁺. The probe showed an excellent selectivity for Zn²⁺over most other competing ions (eg, Cr³⁺, Li⁺, Cd²⁺, Al³⁺, Pb²⁺, Li⁺, Mg²⁺, Ag⁺, Ca²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Hg²⁺, Ba²⁺, K⁺, Na⁺, Cu²⁺, Fe²⁺) in EtOH-HEPES (65:35, v/v, pH?=?7.20), which might be attributed to the photoinduced electron transfer (PET) mechanism. The formation of 1:1 stoichiometric PBZ-Zn²⁺ complex was determined based on the Job's plot, ¹H NMR titration and ESI-MS. The binding constant of the complex was 4.04?×?10⁴?M^?1 with a detection limit of 2.58?×?10^?7?M. The potential application of the PBZ in real water samples for recognizing Zn²⁺ was investigated. Bio-imaging study also revealed that PBZ could be applied to detecting Zn²⁺ in live cells. These results indicated that PBZ could be a favorable probe for Zn²⁺.     

A new click reaction generated AIE-active polymer sensor for Hg2+ detection in aqueous solution

We described herein a new AIE-active polymer sensor incorporating triazole moiety for Hg²⁺ detection in aqueous solution. The polymer sensor P1 was synthesized from tetraphenylethene and diazidobenzene via click reaction. It shows typical AIE feature, and emits cyan fluorescence in the mixture of tetrahydrofuran and water, reaching the strongest fluorescence when the fraction of water (f_w) is 90%. In aqueous solution (f_w?=?90%), the polymer sensor can exhibit fluorescence quenching response towards Hg²⁺ over other competing metal ions, with the fluorescence color changed from cyan to almost no emission, which can be clearly observed by the naked eyes under 365?nm UV lamp.     

2-Aminopyridine derivative as fluorescence ‘On–Off’ molecular switch for selective detection of Fe3+/Hg2+

2-Amino-6-methyl-4-phenyl-nicotinonitrile 1, a 2-aminopyridine-based fluorescent compound, was found to be a fluorescent chemosensor for the detection of Fe³⁺ and Hg²⁺ ions over a number of other metal ions. Compound 1 was synthesized in one step using a multicomponent reaction, and characterized using common spectroscopic tools. During Fe³⁺/Hg²⁺ sensing the compound 1 followed a ‘switch-off’ mechanism. Further, compound 1 could sense Fe³⁺ over Hg²⁺ by its distinct absorption and fluorescence quenching behaviors. 1:1 complex formation of 1 with Fe³⁺ and Hg²⁺ was clearly understood from Job’s plot. The present work brings additional evidence on the importance of multicomponent reactions which could lead to the development of fluorescence chemosensor in one step for the selective detection of biologically important metal ions.     

A bifunctional probe for Al3+ and Zn2+ based on diarylethene with an ethylimidazo[2,1-b]thiazole-6-hydrazide unit

A new diarylethene with ethylimidazo[2,1-b]thiazole-6-hydrazide unit was synthesized, and its photochromic and fluorescent behaviors have been systematically investigated by the stimulation of lights and metal ions in methanol. This new diarylethene exhibited high selectivity and sensitivity toward Al³⁺ and Zn²⁺. The addition of Al³⁺ and Zn²⁺ displayed excellent colorimetric response behaviour with the concomitant color change from colorless to yellow, which could be easily observed by the naked eye. Upon addition of Al³⁺, the fluorescence intensity was enhanced by 180–fold and the emission peak of 1O–Al³⁺ blue-shifted by 15?nm accompanied with a color change from colorless to bright blue. In contrast, when stimulated with Zn²⁺, its fluorescence intensity was enhanced by 35–fold and the emission peak of 1O–Zn²⁺ red-shifted by 16?nm with an evident color change from black to bright green. The LOD for Al³⁺ and Zn²⁺ were determined to be 2.97?×?10^?9?mol?L^?1 and 5.98?×?10^?9?mol?L^?1, respectively. Moreover, a logic circuit was constructed with the fluorescence intensity as the output signal responding to the light and chemical species as the inputs.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

By rationally introducing glutathione functionalized 1, 8–naphthalimide, a novel fluorescent chemosensor (NG) was successfully synthesized. NG can high selectively and sensitively recognize Fe³⁺/Hg²⁺ ions through quenching of fluorescence among all kinds of common metal ions in aqueous medium. The binding stoichiometry ratio of NG–Fe³⁺ is verified as 2:1and NG–Hg²⁺ as 1:2 confirmed by Job's plot method, FT-IR, ¹H NMR and ESI–MS spectrum, and the possible sensing mechanism were also proposed. The chemosensor NG toward Fe³⁺ and Hg²⁺ displays the excellent advantages of high selectivity and sensitivity, low detection limits (7.92?×?10^?8 and 4.22?×?10^?8?M), high association constants (3.37?×?10⁸ and 8.14?×?10⁴?M^?2), instataneous response (about 10s) and wide pH response range (3.0–8.0). Importantly, the chemosensor NG was successfully applied to determine Hg²⁺ in tap water. Meanwhile, the test strips based on NG were prepared, which could conveniently and efficiently detect Fe³⁺ and Hg²⁺. Moreover, the complex of NG and Fe³⁺ (NG–Fe³⁺) showed high selectivity and sensitivity for H₂PO₄￣ over many other anions in the same medium.     

A new Schiff-base as fluorescent chemosensor for selective detection of Cr3+: An experimental and theoretical study

A novel Schiff base fluorescent sensor N,N′-bis(salicylidene)-2,6-bis(4-aminophenyl)-4-phenylpyridine (P3) was synthesized through condensation of 2,6-bis(4-aminophenyl)-4-phenylpyridine and 2-hydroxybenzaldehyde. The obtained results from fluorescence analysis revealed that by excess of Cr³⁺ to P3, a remarkable increase was observed in the fluorescent intensity of the Schiff base at 663?nm with the ratio of CH₃CN/H₂O (95/5%), even though the other cations would likely have no impact on the fluorescence intensity. The cause of this trend might be ascribed to the formation of a 1:1 stoichiometric P3-Cr³⁺ complex, confirmed by Job's plot, which is resulted in preventing the photo-induced electron transfer (PET) process. From fluorescence titration, the association constant K_a was gained 2.28?×?10⁵?M^?1 and the limit of detection (LOD) was determined to be 1.3?×?10^?7?M. Furthermore, the optimized structure together with the electronic spectra of the proposed complex was determined by DFT and TDDFT calculations.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Silole‐Infiltrated Photonic Crystal Films as Effective Fluorescence Sensor for Fe3+ and Hg2+

We develop a highly effective silole‐infiltrated photonic crystal (PC) film fluorescence sensor with high sensitivity, good selectivity and excellent reproducibility for Fe³⁺ and Hg²⁺ ions. Hexaphenylsilole (HPS) infiltrated PCs show amplified fluorescence due to the slow photon effect of PC because the emission wavelength of HPS is at the blue band edge of the selected PC’s stopband. The fluorescence can be quenched significantly by Fe³⁺/Hg²⁺ ions owing to electron transfer between HPS and metal ions. The amplified fluorescence enhances the sensitivity of detection, with a detection limit of 5 nM for Fe³⁺/Hg²⁺ ions. The sensor is negligibly responsive to other metal ions and can easily be reproduced by rinsing with pure water due to the special surface wettability of PC. As a result, a highly effective Fe³⁺/Hg²⁺ ions sensor based on HPS‐infiltrated PC film has been achieved, which will be important for effective and practical detection of heavy metal ions.     

铜转运蛋白C端金属结合域与Ag+及Hg2+的相互作用

铜转运蛋白(CTR1)不仅参与铜的细胞摄取,而且在其它重金属离子的摄取过程中也发挥重要作用. 本文采用紫外-可见(UV-Vis)光谱,核磁共振(NMR)和质谱(MS)的方法,研究了人源CTR1 (hCTR1)的C端金属结合域(C8)与Ag⁺和Hg²⁺的相互作用. 研究表明,Ag⁺和Hg²⁺都能与C8结合,但二者与C8的结合机制明显不同. 每个C8分子可以结合两个Ag⁺离子,但一个Hg²⁺却可以与两个C8形成桥联. 此外,Ag⁺离子与C8的配位是一个中等速度的交换过程,而Hg²⁺离子则为快速交换过程. C8的半胱氨酸残基是两种离子的重要结合位点,同时组氨酸残基也参与两种金属离子的配位,其中Ag⁺优先结合组氨酸,而Hg²⁺则对半胱氨酸的结合具有显著的优势. 虽然HCH基序对C8 与金属配位至关重要,一些远端的其它氨基酸也可以参与C8 与银离子的配位,这可能与CTR1 在摄取Ag⁺过程中的金属转移机制相关. 这些结果为理解hCTR1 蛋白摄取重金属离子的作用机制提供了必要的信息.     

Fe3+和Fe2+对原代培养的成骨细胞增殖、分化和矿化功能的影响

采用噻唑蓝(MTT)法、碱性磷酸酶(ALP)比活性测定、油红O染色和茜素红染色及定量分析,研究了不同浓度的Fe3+和Fe2+对原代培养的成骨细胞增殖、分化及矿化功能的影响.结果表明:浓度为1×10-9～1×10-4 mol·L-1的Fe3+和Fe2+促进成骨细胞增殖,但是在较高浓度1×10-3 mol·L-1时,它们则抑制成骨细胞增殖.与成骨细胞作用48 h,浓度为1×10-8～1×10-4 mol·L-1的Fe3+和Fe2+抑制其分化,但在较低的浓度1×10-9 mol·L-1时则对其分化没有影响:进一步延长作用时间为72 h,Fe3+对成骨细胞分化没有影响,除1×10-6mol·L-1浓度的Fe2+促进成骨细胞分化外,其他浓度的Fe2+则抑制其分化;测试浓度下的Fe3+对成骨细胞向脂肪细胞的横向分化表现为抑制或没有影响,而Fe2+的影响则依赖于浓度和作用时间.在1×10-8～1×10-5mol·L-1浓度范围内,Fe3+和Fe2+对矿化结节的影响表现出相反的效应.在较高浓度(1×10-4mol·L-1)下,它们促进矿化节结的形成,而在较低浓度(1×10-9mol·L-1)下,Fe3+抑制矿化节结的形成,Fe2+则没有影响.结果提示:浓度.作用时间和铁离子的价态都是影响Fe3+和Fe2+生物效应(从毒性到活性,从损伤到保护,从上调到下调)转变的关键因素.     

Novel multi-responsive fluorescence switch for Hg2+ and UV/vis lights based on diarylethene-rhodamine derivative

A new multi-responsive fluorescent switch DTE-Pip-Rho 1O has been designed and synthesized in this study. For this molecule, the reactive site of spirolactam ring is far away from the diarylethene unit through the intramolecular piperazine. It exhibited high selectivity and sensitivity to Hg²⁺ in addition to obvious color change (colorless-pink) and fluorescence “off-on” (dark-orange) during this process. It is believed that the color change is due to Hg²⁺-assisted hydrolysis of rhodamine hydrazide. Therefore, the new molecule can be used as colorimentric and fluorescent chemosensor for Hg²⁺ with high selectivity. The detection limits of absorbance and fluorescence for Hg²⁺ were calculated to be 1.15?μM and 1.16?μM, respectively. The resulting DTE-Pip-Rho 1O-Hg²⁺ could also function as a reversible fluorescence photo-switch in response to UV/vis light owing to FRET mechanism. Moreover, it has been demonstrated that the photo-switchable system displayed excellent fatigue resistance and remarkable anti-photobleaching capability.     

Coordination de la phosphine organo-fer [CpFeIIC6Me5CH2PPh2]+ au RhI et proprietes spectroscopiques,electrochimiques et catalytiques des complexes heterobinucleaires FeII-RhI

The reactions between the phosphine-organoiron [CpFe^II-η⁶-C₆Me₅CH₂PPh₂]⁺ PF₆^? (1) and [RhCl(η⁴-diolefin)(μ-Cl)]₂ in CH₂Cl₂ at reflux give the new heterobinuclear air-stable crystalline complexes [CpFe^II-η⁶-C₆Me₅CH₂)P(Ph)₂Rh(η⁴-diene)Cl]PF₆,(D'*-diene=cyclooctadiene (COD): 65%, 2; trimethylfluorobenzobicyclo[2.2.2]octadiene (Me₃TFB): 48%, 3). Complexes 2 and 3 have been studied by ¹H, ¹³C and ³¹P NMR spectroscopy and they are carbonylated (CO, 1 atm). Cyclic voltammetry experiments with addition of MeOH show electron transfer Fe^IRh^I → Fe^IIRh⁰, the presence of a catalytic wave Fe^I/Fe^II and the possible formation of Rh hydrides. Under normal conditions 2 is a catalyst for hydrogenation of cyclohexene, but it is less efficient than the known mononuclear Rh¹ analogues.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Na+/K+-ATPase: Activity and inhibition

The aim of the study was to give an overview of the mechanism of inhibition of Na⁺/K⁺-ATPase activity induced by some specific and non specific inhibitors. For this purpose, the effects of some ouabain like compounds (digoxin, gitoxin), noble metals complexes ([PtCl₂DMSO₂], [AuCl₄]⁻, [PdCl₄]²⁻, [PdCl(dien)]⁺, [PdCl(Me₄dien)]⁺), transition metal ions (Cu²⁺, Zn²⁺, Fe²⁺, Co²⁺), and heavy metal ions (Hg²⁺, Pb²⁺, Cd²⁺) on the activity of Na⁺/K⁺-ATPase from rat synaptic plasma membranes (SPM), porcine cerebral cortex and human erythrocytes were discussed. The article is published in the original.     

Two Rhodamine-based Turn on Chemosensors with High Sensitivity,Selectivity, and Naked-Eye Detection for Hg2+

Two novel rhodamine-based fluorescence enhanced molecular probes (RA₁ and RA₂) were synthesized, which were both designed as comparative fluoroionophore and chromophore for the optical detection of Hg²⁺. The recognizing behaviors were investigated both experimentally and computationally. They exhibited high selectivity and sensitivity for Hg²⁺ over other commonly coexistent metal ions in CH₃CN/H₂O (1:1, V/V) solution. Test shows that hydroxy benzene of rich electron was beneficial to the chelate of Hg²⁺ with sensors. The detection limit was measured to be at least 0.14 μmol/L. After addition of Hg²⁺, the color changed from colourless to pink, which was easily detected by the naked eye in both solution and hydrogel sensor.     

Asymmetrical nitrogen-40;1 Geminal systems-261 N-chlorohydrazines3

The factors determining the kinetic and thermodynamic stabilities of N-chlorohydrazines are discussed. Acyclic N-chlorohydrazines exist only as trialkyldiazenium chlorides 3a,b. Chlorination of 2-acyl-1, 1-dimethylhydrazines 6a,b gave 1,4-diacyl-2,3-dimethylhexahydro-1,2,4,5-tetrazines 7a,b via hydrazyl radical intermediates, and chlorination of a 1-phenylpyrazolidin-5-one 8 gave phenylazoisovaleric esters 9a,b. Stable N-chlorohydrazines were obtained from bicyclic hydrazines; viz. the 2-chloro-1,2-diazabicyclo [2.2.2]octan-3-one 12 and 7-chloro-1,7-diazabicyclo[2.2.1]heptane 16. The restricted inversion of N(7) in 16 and its 1-methyl quaternary salt 21 were observed in the ¹³C-NMR spectra. The acyclic N-chloro-hydrazinium salt 25 was isolated.     

A new rhodamine-based fluorescent chemosensor for transition metal cations synthesized by one-step facile condensation

A new rhodamine-based fluorescent chemosensor (1) for transition metal cations was synthesized by one-step facile condensation of rhodamine B and 2-aminopyridine. Without metal cations, 1 is colorless and nonfluorescent, whereas addition of metal cations (Fe³⁺, Hg²⁺, Pb²⁺, and Fe²⁺) leads to an obvious color change to pink and an appearance of orange fluorescence.     

A highly selective coumarin-based chemosensor for the sequential detection of Fe3+ and pyrophosphate and its application in living cell imaging

A new chemosensor based on coumarin FB has been designed and synthesized for the detection of Fe³⁺ and PPi. FB displayed a high affinity to Fe³⁺ in the presence of other competing cations. The resulting FB-Fe³⁺ complex displayed highly sensitivity to PPi via Fe³⁺ displacement approach. The Fe³⁺ and PPi recognition processes is rapid and reversible, the detection limits of FB to Fe³⁺ and FB-Fe³⁺ complex to PPi were estimated to be 8.73?×?10^?8?M and 1.25?×?10^?8?M, respectively. The good biocompatibility of FB enables the investigation of fluorescent response for Fe³⁺ and PPi in living cells by confocal microscope. A B3LYP/6-31G(d,p) basis set was employed for optimization of FB and FB-Fe³⁺ complex.