基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

Synthesis of amphiphilic triblock copolymers as multidentate ligands for biocompatible coating of quantum dots

One barrier to apply current tri-octylphosphine oxide (TOPO) based quantum dots (QDs) to biomedical imaging is that the TOPO on TOPO-QDs can be replaced by the proteins in living system, which may cause the degradation of QDs and/or deactivation of protein. In order to develop biocompatible optical imaging agents, a novel triblock copolymer, designed as a multidentate ligand, was synthesized to coat quantum dot nanocrystals (QDs). The copolymer consists of a polycarboxylic acid block at one end and a polythiol block at the other end with an intervening cross-linked poly(styrene-co-divinylbenzene) block bridging the ends. The multiple mercapto groups from the polythiol block act as multidentate ligands to stabilize QDs, while the polycarboxylic acid block improves the water solubility of QDs and offers reaction sites for surface modification or conjugation with bimolecules. The cross-linked poly(styrene-co-divinylbenzene) block provides a densely compacted hydrophobic shell. This shell will act as a barrier to inhibit the degradation of QDs by preventing the diffusion of ions and small molecules into the core of QDs. This new multidentate polymer coating facilitates the transfer of QDs from organic solvent into aqueous phase. The QDs directly bound to multidentate mercapto groups instead of TOPO are less likely to be affected by the mercapto or disulfide groups within proteins or other biomolecules. Therefore, this research will provide an alternative coating material instead of TOPO to produce QDs which could be more suitable for in vivo use under complex physiological conditions.     

Minimizing the hydrodynamic size of quantum dots with multifunctional multidentate polymer ligands

We report a new strategy to minimize the hydrodynamic size of quantum dots (QDs) and to overcome their colloidal stability and photobleaching problems based on the use of multifunctional and multidentate polymer ligands. A novel finding is that a balanced composition of thiol (-SH) and amine (-NH 2) coordinating groups grafted to a linear polymer chain leads to highly compact nanocrystals with exceptional colloidal stability, a strong resistance to photobleaching, and high fluorescence quantum yields. In contrast to the standing brushlike conformation of PEGylated dihydrolipoic acid molecules, mutlidentate polymer ligands can wrap around the QDs in a closed "loops-and-trains" conformation. This structure is highly stable thermodynamically and is responsible for the excellent colloidal and optical properties. We have optimized this process for the preparation of ultrastable CdTe nanocrystals and have found the strategy to be broadly applicable to a wide range of nanocrystalline materials and heterostructures. This work has led to a new generation of bright and stable QDs with small hydrodynamic diameters between 5.6 and 9.7 nm with tunable fluorescence emission from the visible (515 nm) to the near-infrared (720 nm). These QDs are well suited for molecular and cellular imaging applications in which the nanoparticle hydrodynamic size must be minimized.     

Constraints in post-synthesis ligand exchange for hybrid organic (MEH-PPV)–inorganic (CdSe) nanocomposites

For an optimum charge/energy transfer performance of hybrid organic–inorganic colloidal nanocrystals for applications such as photonic devices and solar cells, the determining factors are the distance between the nanocrystal and polymer which greatly depends upon nanocrystal size/nanocrystal ligands. Short chain ligands are preferred to ensure a close contact between the donor and acceptor as a result of the tunnelling probability of the charges and the insulating nature of long alkyl chain molecules. Short distances increase the probability for tunnelling to occur as compared to long distances induced by long alkyl chains of bulky ligands which inhibit tunnelling altogether. The ligands on the as-synthesized nanocrystals can be exchanged for various other ligands to achieve desirable charge/energy transfer properties depending on the bond strength of the ligand on the nanocrystal compared to the replacement ligand. In this work, the constraints involved in post-synthesis ligand exchange process have been evaluated, and these factors have been tuned via wet chemistry to tailor the hybrid material properties via appropriate selection of the nanocrystal capping ligands. It has been found that both oleic acid and oleylamine (OLA)-capped cadmium selenide (CdSe) quantum dots (QDs) as compared with trioctylphosphine oxide (TOPO)-passivated CdSe QDs are of high quality, and they provide better steric stability against coagulation, homogeneity, and photostability to their respective polymer:CdSe nanocomposites. CdSe QDs particularly with OLA capping have relatively smaller surface energies, and thus, lesser quenching capabilities show dominance of photoinduced Forster energy transfer between donors (polymer) and acceptors (CdSe nanocrystals) as compared to charge transfer mechanism as observed in polymer:CdSe (TOPO) composites. It is conjectured that size quantization effects, stereochemical compatibility of ligands (TOPO, oleic acid, and oleyl amine), and polymer MEH-PPV stability greatly influence the photophysics and photochemistry of hybrid polymer–semiconductor nanocomposites.     

Bright and compact alloyed quantum dots with broadly tunable near-infrared absorption and fluorescence spectra through mercury cation exchange

We report a new strategy based on mercury cation exchange in nonpolar solvents to prepare bright and compact alloyed quantum dots (QDs) (Hg(x)Cd(1-x)E, where E = Te, Se, or S) with equalized particle size and broadly tunable absorption and fluorescence emission in the near-infrared. The main rationale is that cubic CdE and HgE have nearly identical lattice constants but very different band gap energies and electron/hole masses. Thus, replacement of Cd(2+) by Hg(2+) in CdTe nanocrystals does not change the particle size, but it greatly alters the band gap energy. After capping with a multilayer shell and solubilization with a multidentate ligand, this class of cation-exchanged QDs are compact (6.5 nm nanocrystal size and 10 nm hydrodynamic diameter) and very bright (60-80% quantum yield), with narrow and symmetric fluorescence spectra tunable across the wavelength range from 700 to 1150 nm.     

Structural and Size Effects on the Spectroscopic and Redox Properties of CdSe Nanocrystals in Solution: The Role of Defect States

Two series of CdSe quantum dots (QDs) with different diameters are prepared, according to frequently used protocols of the same synthetic procedure. For each sample the photophysical properties and the potentials for the first reduction and oxidation processes in organic solution are determined. The band gap obtained from electrochemical experiments is compared with that determined from the absorption and luminescence spectra. While the optical band gap decreases upon increasing the nanocrystal diameter, as expected on the basis of quantum confinement, the redox potentials and the electrochemical band gap are not monotonously related to the QD size. For both series, the smallest and largest QDs are both easier to oxidize and reduce than mid‐sized QDs. In fact, the latter samples exhibit very broad voltammetric profiles, which suggests that the heterogeneous electron‐transfer processes from/to the electrode are kinetically hindered. Conversely, the electrochemical band gap for the smallest and largest particles of each series is somewhat smaller than the optical band gap. These results indicate that, while the optical band gap depends on the actual electron–hole recombination within the nanocrystal, and therefore follows the size dependence expected from the particle‐in‐a‐box model, the electrochemical processes of these QDs are strongly affected by other factors, such as the presence of surface defects. The investigations suggest that the influence of these defects on the potential values is more important for the smallest and largest QDs of each series, as confirmed by the respective luminescence bands and quantum yields. An interpretation for the size‐dependent evolution of the surface defects in these nanocrystals is proposed based on the mechanism of their formation and growth.     

Optical sensing quantum dot-labeled polyacrolein particles prepared by layer-by-layer deposition technique

Optical sensing polymer particles with tailored semiconductor nanocrystal (QD) loading are prepared by layer-by-layer deposition technique (LbL). Polyacrolein particles of 1.2 μm diameter are used as solid support for deposition of hydrophilic CdSe/ZnS nanocrystal/polyelectrolyte multilayers formed by electrostatic interactions. The pH-dependent fluorescence of QDs and pH-dependent conformations of polyelectrolytes, which likely passivate the surface state of nanocrystals, allow a creation of both mono- and multiplex coded polymer particles with pH-dependent fluorescence intensity. Bovine serum albumin (BSA) as outermost layer makes it possible to design the optical sensing polymer particles with reversibly responded fluorescence at pH variations. The fluorescence of such polymer particles with BSA outer layer is sensitive to copper(II) ion while the fluorescence of these particles is practically insensitive to the other divalent cations (Zn(2+), Ca(2+), Ba(2+), Co(2+), Mg(2+)). The detection limit of Cu(2+) is about 15 nM. Adaptation of LbL method to prepare QD-labeled polymer particles with enhanced complexity (e.g. several types of QDs, multiple biofunctionality) is expected to open new opportunities in biotechnological applications.     

Multidentate-protected colloidal gold nanocrystals: pH control of cooperative precipitation and surface layer shedding

Colloidal gold nanocrystals (AuNCs) with broad size tunability and unusual pH-sensitive properties have been synthesized using multidentate polymer ligands. Because they contain both carboxylic functional groups and sterically hindered aliphatic chains, the multidentate ligands can not only reduce gold precursors but also stabilize gold nanoclusters during nucleation and growth. The "as-synthesized" AuNCs are protected by an inner coordinating layer and an outer polymer layer and are soluble in water and polar solvents. When the solution pH is lowered by just 0.6 units (from 4.85 to 4.25), the particles undergo a dramatic cooperative transition from being soluble to insoluble, allowing rapid isolation, purification, and redispersion of the multidentate-protected AuNCs. A surprising finding is that when a portion of the surface carboxylate groups are neutralized by protonation, the particles irreversibly shed their outer polymer layer and become soluble in nonpolar organic solvents. Furthermore, the multidentate polymer coatings are permeable to small organic molecules, in contrast to the tightly packed self-assembled monolayers of alkanethiols on gold. These insights are important in regard to the design of "smart" imaging and therapeutic nanoparticles that are activated by small pH changes in the tumor interstitial space or endocytic organelles.     

Fine tuning of the morphology of copper oxide nanostructures and their application in ambient degradation of methylene blue

A low-cost, green, and reproducibly non-injection one-pot synthesis of high-quality CdS quantum dots (QDs) is reported. The synthesis was performed in the open air by mixing precursors cadmium stearate and S powder into a new solvent N-oleoylmorpholine. An overlapped nucleation-growth stage followed by a dominated growth stage was observed. The resulting QDs exhibited well-resolved absorption fine substructure and a dominant band-edge emission with a narrow size distribution (the full width at half maximum (fwhm) was only 22-24nm). The maximum photoluminescence (PL) quantum yield (QY) was as high as 46.5%. Highly monodispersed CdS QDs with tunable sizes and similar PL fwhm and QYs could also be obtained from the CdS QDs in a large-scale synthesis. The high-resolution transmission electron microscopy (HRTEM) images and powder X-ray diffraction (XRD) pattern suggested that the as-prepared QDs with high crystallinity had a cubic structure. A significant PL improvement and a continuous QY increase for the CdS QDs were observed during a long storage time in air and in a glovebox under room temperature. A slow surface reconstruction was proposed to be the cause for the PL enhancement of CdS QDs.     

One-pot synthesis of high-quality zinc-blende CdS nanocrystals

This paper reports a one-pot synthetic method for producing CdS nanocrystals. We have demonstrated that the nanocrystal nucleation and growth stages can be automatically separated in a homogeneous system with the presence of nucleation initiators. Accelerators used for more than 70 years in rubber vulcanization (i.e., tetraethylthiuram disulfides, and 2,2'-dithiobisbenzothiazole) were found to be effective nucleation initiators for CdS nanocrystal synthesis. The as-prepared CdS nanocrystals are highly monodisperse and possess a zinc blende crystal structure. The quantum yield of the band-gap photoluminescence is up to 12% when the surface-trap emission was totally eliminated after a gentle oxidation under laboratory fluorescent light.     

Highly crosslinked poly(dimethylsiloxane) microbeads with uniformly dispersed quantum dot nanocrystals

This study demonstrates how luminescent semiconductor nanocrystals (quantum dots or QDs) can be dispersed uniformly in a poly(dimethylsiloxane) (PDMS) matrix by polymerizing a mixture of the prepolymer oligomers and the nanocrystals with a relatively large concentration of crosslinking molecules. A microfluidic device is used to fabricate PDMS microbeads embedded with the QDs by using flow focusing to first form monodisperse droplets of the prepolymer/crosslinker/nanocrystal mixture in a continuous aqueous phase. The droplets are subsequently collected, and heated to polymerize them into solid microbead composites. The degree of aggregation of the nanocrystals in the matrix is studied by measuring the nonradiative resonance energy transfer (RET) between the nanocrystals. For this purpose, two quantum dots are used with maxima in their luminescence emission spectrum at 560 nm and 620 nm. When the nanocrystals are within the F?rster radius (approximately 10 nm) of each other, exciton energy cascades from the QDs which emit at the shorter wavelength to the QDs which emit at the longer wavelength. This energy transfer is quantified, for two concentration ratios of the prepolmer to the crosslinker, by measuring the deviation of the microbead luminescence spectrum from a reference spectrum obtained by dispersing the QD mixture in a solvent (toluene) in which the nanocrystals do not aggregate. For a low concentration of crosslinking molecules relative to the prepolymer (5:1 by weight prepolymer to crosslinker), strong RET is observed as the emission of the 620 nm QDs is increased and the 560 nm QDs is decreased relative to the reference. In the emission spectrum for a higher concentration of crosslinkers (2:1 by weight prepolymer to crosslinker), the resonance energy transfer is less relative to the case of the low concentration of crosslinkers, and the spectrum more closely resembles the reference. This result indicates that the increase in the crosslinker concentration has reduced the nanocrystal aggregation in the cured polymer. The use of crosslinking can serve as a general paradigm for forming, from a prepolymer/nanoparticle mixture, a composite in which the particles are not aggregated. Under the usual conditions the entropic cost to a linearly growing polymer chain of surrounding nanoparticles forces them to aggregate; crosslinking kinetically entraps the particles and circumvents this aggregation driving force. The QD/polymer composite microbeads fabricated in this study find applications in bead-based platforms for high-throughput, multiplexed screening, where the emission spectrum of the QD luminescence can be used as a spectral barcode to label the beads. For microbeads in which the nanocrystals are uniformly dispersed, this barcode is undistorted by energy transfer, and is easily read.     

Lead Sulfide Nanocrystal-Polymer Composites for Optoelectronic Applications

Summary: Nanocomposite films were prepared by two methods in which lead sulfide (PbS) nanocrystals were contained in an organic matrix. One method used a wet chemical synthesis of the nanocrystals in the direct presence of a polymer, where the polymer controlled nanocrystal growth. The second method was gaseous deposition of nanocrystals into the organic phase. The two methods were similar in that the nanocrystals in the composites were free from surfactant capping layers that otherwise would add an interfacial region between the nanocrystal and the organic matrix. The gaseous deposition technique had several advantages over the wet chemical synthesis in that it allowed direct control over nanocrystal size and density, improved flexibility in the choice of organic phase, and was compatible with lithographic methods.     

Interactions between CdTe quantum dots and DNA revealed by capillary electrophoresis with laser‐induced fluorescence detection

Quantum dots (QDs) are one of the most promising nanomaterials, due to their size‐dependent characteristics as well as easily controllable size during the synthesis process. They are promising label material and their interaction with biomolecules is of great interest for science. In this study, CdTe QDs were synthesized under optimal conditions for 2 nm size. Characterization and verification of QDs synthesis procedure were done by fluorimetric method and with CE. Afterwards, QDs interaction with chicken genomic DNA and 500 bpDNA fragment was observed employing CE‐LIF and gel electrophoresis. Performed interaction relies on possible matching between size of QDs and major groove of the DNA, which is approximately 2.1 nm.     

Fluorescent turn-on detection of cysteine using a molecularly imprinted polyacrylate linked to allylthiol-capped CdTe quantum dots

CdTe quantum dots capped with thioglycolic acid (TGA) display a strong turn-on fluorescence response if exposed to solutions of cysteine (Cys). In order to exploit this effect, a molecularly imprinted polymer (MIP) for Cys was covalently linked to the QDs via allyl mercaptan. The resulting nanomaterials (QDs, MIP-coated QDs, and nonimprint-coated QDs) were characterized by FTIR and scanning electron microscopy. The adsorption of Cys was studied in phosphate buffer (pH 7.4) with respect to equilibration times (5, 15, and 40 min, respectively), binding constants [2.98, 2.42, and 0.96 (×10⁴ M^?1)], and Langmuir isotherms (R²?=?0.9995, 0.9999, and 0.9983) in the Cys concentration range between 3.33 μM to 500 μM. The method has a detection limit of 0.85 μM (3σ, blank, for n?=?10). The selectivity of the MIP-coated QDs for Cys over 19 other amino acids is similar to that of bare QDs, but MIP-QDs afford better recoveries of Cys from solutions also containing bovine serum albumin (90 %) and fetal bovine serum (97 %), respectively, when compared to the recoveries that are obtained with bare (non-imprinted) QDs (135 % and 120 %). This is probably due to the fact that the outer MIP shell largely reduces protein wrapping, dot aggregation, and matrix inclusion.

Microwave-assisted four-component, one-pot condensation reaction: an efficient synthesis of annulated pyridines

A one-pot, effective synthesis of pyridines by a modified Kr?hnke procedure is described. Polysubstituted annulated pyridines were synthesized in high yields by four-component, one-pot cyclocondensation reactions of N-phenacylpyridinium bromide, aromatic aldehydes, acetophenones or cyclic ketones in the presence of ammonium acetate and acetic acid, assisted by microwave irradiation. In this procedure, cyclic ketones with two alpha-CH(2) groups yield annulated pyridines with additional alpha-benzylidene groups, which are derived in situ from double aldol condensation of cyclic ketones with two moles of aromatic aldehydes.     

Biomimetic crystallization of Ag2S nanoclusters in nanopore assemblies

Self-organized nanocrystal architectures with subnanometric spatial resolution were obtained by mimicking the biological crystal growth. The key step of this facile, one-pot, biomimetic route is to induce the self-assembly of the artificial nanopore cucurbit[7]uril with metal ions, which generates supramolecular aggregates that recreate the physicochemical environment of biomineralization processes. The approach holds great promise for the fabrication of nanocrystal superstructures of functional materials, useful in optics, electronics, and catalysis.     

Preparation of quantum dots encoded microspheres by electrospray for the detection of biomolecules

In this paper, a novel method based on the electrospray technique has been developed for preparation of quantum dot (QD)-encoded microspheres for the fist time. By electrospraying the mixture of polymer solution and quantum dots solution (single-color QDs or multi-color QDs), it is accessible to obtain a series of composite microspheres containing the functional nanoparticle. Poly(styrene-acrylate) was utilized as the electrospray polymer materials in order to obtain the microsphere modified with carboxyl group on the surface. Moreover, to test the performance of the QD-encoded microsphere in bioapplication, it is carried out that immunofluorescence analysis between antigens of mouse IgG immobilized on the functional microsphere and FITC labeled antibodies of goat-anti-mouse IgG in experiment. To the best of our knowledge, this is the first report of QD-encoded microspheres prepared by electrospray technology. This technology can carry out the one-pot preparation of different color QD-encoded microspheres with multiple intensities. This technology could be also suitable for encapsulating other optical nanocrystals and magnetic nanoparticles for obtaining multifunctional microspheres. All of the results in this paper show that the fluorescence beads made by electrospray technique can be well applied in multiplex analysis. These works provide a good foundation to accelerate application of preparing microspheres by electrospray technique in practice.     

Near‐Infrared Active Lead Chalcogenide Quantum Dots: Preparation,Post‐Synthesis Ligand Exchange,and Applications in Solar Cells

Quantum dots (QDs) of lead chalcogenides (e.g. PbS, PbSe, and PbTe) are attractive near‐infrared (NIR) active materials that show great potential in a wide range of applications, such as, photovoltaics (PV), optoelectronics, sensors, and bio‐electronics. The surface ligand plays an essential role in the production of QDs, post‐synthesis modification, and their integration to practical applications. Therefore, it is critically important that the influence of surface ligands on the synthesis and properties of QDs is well understood for their applications in various devices. In this Review we elaborate the application of colloidal synthesis techniques for the preparation of lead chalcogenide based QDs. We specifically focus on the influence of surface ligands on the synthesis of QDs and their solution‐phase ligand exchange. Given the importance of lead chalcogenide QDs as potential light harvesters, we also pay particular attention to the current progress of these QDs in photovoltaic applications.     

Role of self-assembly in construction of inorganic nanostructural materials

Understanding the evolution process and formation mechanism of nanoscale structures is crucial to controllable synthesis of inorganic nanomaterials with well-defined geometries and unique functionalities. In addition to the conventional Ostwald ripening process, oriented aggregation has been recently found to be prevalent in nanocrystal growth. In this new mechanism, primary small nanocrystals firstly spontaneously aggregate in the manner of oriented attachment, and then the large crystalline materials are formed via the process of interparticle recrystallization. Furthermore, controllable fabrication of the ordered nanocrystal solid materials that has shown specific collective properties will promote the application of inorganic nanocrystal in devices. Therefore, investigation of the mechanism of oriented aggregation is essential to controllable synthesis of nanocrystals and ordered nanocrystal solid materials. In this review, we summarize recent advances in the preparation of nanocrystal materials, which are mostly focused on our work about the role of self-assembly in construction of inorganic nanostructural materials.     

CdS量子点的一步法合成及量子产率

以油酸为配体,十八烯为溶剂,采用一步法合成了CdS量子点,研究了反应温度、反应时间和Cd/S的摩尔比对量子点光谱性能的影响.X射线衍射(XRD)和高分辨透射电镜(HRTEM)测试结果表明,所获得的CdS量子点为立方闪锌矿结构,且尺寸分布均一,结晶度高,其较强的带边发光、尖锐的紫外吸收峰以及狭窄的荧光发射峰进一步表明量子...