Density and viscosity of three (2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems

Densities and viscosities were determined for binary mixtures of 2,2,2-trifluoroethanol (TFE) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) or 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([bmim][NTf₂]) over the entire range of composition. The experimental measurements were carried out at temperatures ranging from 278.15 K to 333.15 K, at atmospheric pressure. The densities and viscosities of the pure ionic liquids and their mixtures with TFE were described successfully by an empirical third-order polynomial and by the Vogel–Fulcher–Tammann equation, respectively. In addition, excess molar volumes and viscosity deviations were determined from densities and viscosities of mixtures, respectively, and fitted by using the Redlich–Kister equation.     

Experiments and model for the surface tension of (MDEA + [Bmim][BF4]) and (MDEA + [Bmim][Br]) aqueous solutions

The surface tension (γ) of 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF₄]), 1-butyl-3-methylimidazolium bromide ([Bmim][Br]), (N-methyldiethanolamine(MDEA) + [Bmim][BF₄]) and (MDEA + [Bmim][Br]) aqueous solutions were measured by using the BZY-1 surface tension meter. The temperature ranged from (293.2 to 323.2) K. The mass fraction of MDEA ranged from 0.35 to 0.45. A thermodynamic equation was proposed to model the surface tension of (MDEA + ionic liquids) (ILS) aqueous solutions and the calculated results agreed well with the experiments. The effects of temperature, mass fractions of MDEA and ILS on the surface tension were demonstrated on the basis of experiments and calculations.     

Micropolarity and aggregation behavior in ionic liquid + organic solvent solutions

UV–vis spectroscopy and conductivity measurement techniques were used to study the physicochemical and structural properties of the binary or ternary mixtures of 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) + organic solvent and 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + organic solvent systems. The solvents involved were acetonitrile, water, ethanol, ethyl acetate, and tetrahydrofuran. It was indicated that the micropolarity and the aggregation behavior of the mixtures depend strongly on the dielectric constants of the solvents and the composition of the mixtures.     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

Coexistence curves of ionic liquid in oil microemulsions of {[bmim][BF4] + T-X100 + cyclohexane} with various molar ratio of [bmim][BF4] to T-X100 in the critical region

The coexistence curves (T, n), (T, Φ), and (T, Ψ) (n, Φ, and Ψ are the refractive index, volume fraction, and effective volume fraction, respectively) for the ionic liquid microemulsion systems of {polyoxyethylene tert-octylphenyl ether (T-X100) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + cyclohexane} with various molar ratio (ω) of [bmim][BF₄] to T-X100 have been determined by measuring refractive indices at a constant pressure in the critical region. The critical temperatures (T_c) and critical volume fraction (Φ_c) were obtained for the ionic liquid microemulsions. The critical exponents were deduced precisely from the coexistence curves within about 1 K below T_c and the values were consistent with the 3D Ising value.     

Volumetric properties,viscosities and refractive indices of binary liquid mixtures of tetrafluoroborate-based ionic liquids with methanol at several temperatures

Densities, speeds of sound, viscosities and refractive indices of two binary systems 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] + methanol and 1-ethyl-3-methylimidazolium tetrafluoroborate [emim][BF₄] + methanol, as well as of all pure components, have been measured covering the whole range of compositions at T = (278.15 to 318.15) K and p = 101 kPa. From this data, excess molar volumes, excess isentropic compressibilities, viscosity deviations and refractive index deviations were calculated and fitted to extended versions of the Redlich–Kister equation. Estimated coefficients of these equations taking into account the dependence on composition and temperature simultaneously were also presented.     

Mixing and decomposition behavior of {[4bmpy][Tf2N] + [emim][EtSO4]} and {[4bmpy][Tf2N] + [emim][TFES]} ionic liquid mixtures

Mixing ionic liquids (ILs) has been revealed as a useful way to finely tune the properties of IL-based solvents. The scarce available studies on IL mixtures have shown a quasi-ideal behavior of their physical properties. In this work, we have performed a thermophysical characterization of two binary IL mixtures, namely {4-methyl-N-butylpyridinium bis(trifluoromethylsulfonyl)imide ([4bmpy][Tf₂N]) + 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO₄])} and {[4bmpy][Tf₂N] + 1-ethyl-3-methylimidazolium 1,1,2,2-tetrafluoroethanesulfonate [emim][TFES]}. Both binary IL mixtures have been recently proposed as promising solvents in the (liquid + liquid) extraction of aromatic hydrocarbons from mixtures with alkanes. Densities, viscosities, refractive indices, thermal stability, and specific heats of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} and {[4bmpy][Tf₂N] + [emim][TFES]} IL mixtures have been measured as a function of both temperature and composition. Dynamic viscosities, refractive indices, and thermal stability of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} mixture have exhibited strong deviations from the ideality, in contrast with the quasi-ideal properties of the {[4bmpy][Tf₂N] + [emim][TFES]} mixture and the behavior of the imidazolium and pyridinium-based IL mixtures studied hitherto. The reliability of predictive methods of the thermophysical properties of the mixtures has also been evaluated.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Low-temperature heat capacity of hydrophilic ionic liquids [BMIM][CF3COO] and [BMIM][CH3COO] and a correlation scheme for estimation of heat capacity of ionic liquids

Heat capacity for 1-butyl-3-methylimidazolium trifluoroacetate [bmim][CF₃COO] and acetate [bmim][CH₃COO] in the temperature range of (5 to 370) K has been measured by adiabatic calorimetry. Temperatures and enthalpies of phase transitions in [bmim][CF₃COO] have been determined. Thermodynamic functions for the compounds in the condensed state have been calculated. Physicochemical properties for the studied ionic liquids and alkali acetate salts have been compared. The correlation scheme for estimation of C_p of ionic liquids in a range of (190 to 370) K has been developed.     

Experimental methodology for precise determination of density of RTILs as a function of temperature and pressure using vibrating tube densimeters

A specific calibration procedure that allows the accurate determination of densities of room temperature ionic liquids, RTILs, as a function of temperature and pressure using vibrating tube densimeters is presented. This methodology overcomes the problems of common calibration methods when they are used to determine the densities of high density and high viscosity fluids such as RTILs. The methodology is applied for the precise density determination of RTILs 1-ethyl-3-methylimidazolium tetrafluoroborate [Emim][BF₄], 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF₄], 1-hexyl-3-methylimidazolium tetrafluoroborate [Hmim][BF₄], and 1-octyl-3-methylimidazolium tetrafluoroborate [Omim][BF₄] in the temperature and pressure intervals (283.15 to 323.15) K and (0.1 to 60) MPa, respectively. The viscosities of these substances, needed for the estimation of the viscosity-induced errors, were estimated at the same conditions from the experimental measurements in the intervals (283.15 to 323.15) K and (0.1 to 14) MPa and from a specific extrapolation procedure. The uncertainty in the density measurements was estimated in ±0.30 kg · m^?3 which is an excellent value in the working intervals. The results of these RTILs have demonstrated that viscosity-induced errors are relevant and they must be taken into account for a precise density determination. Finally, an alternative tool for a simpler application of this procedure is presented.     

A comparative study on the ionic liquid [bmim][BF4] and its solution with transient absorption spectroscopy

A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) with its solution in water or acetonitrile. It was concluded that the excited triplet state ³[bmim]^+* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] and the cation radical [bmim] ²⁺ were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF₄] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF₄] and β-carotene further affirmed the existence of ³[bmim]^+*. And the reaction that the hydrated electron captured by [bmim]⁺ to produce [bmim] in solution was observed.     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

[Bmim]BF4 ionic liquid: a novel reaction medium for the synthesis of β-amino alcohols

Epoxides undergo smooth ring-opening with aryl amines in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild and neutral conditions to afford the corresponding β-amino alcohols in excellent yields with high regioselectivity.     

[Bmim]PF6 and BF4 ionic liquids as novel and recyclable reaction media for aromatic amination

Activated aryl halides undergo smooth nucleophilic substitution reactions with secondary amines in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquids (ILs) at room temperature to afford the corresponding arylamines in excellent yields under mild and neutral conditions.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

On the characterization of some [bmim][X]/co-solvent binary mixtures: a multidisciplinary approach by using kinetic, spectrophotometric and conductometric investigations

In order to study the intrinsic characteristics and to evaluate the structural variations determined by the addition of a co-solvent to 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) we examined the behaviour of some probes in [bmim][BF₄]/co-solvent binary mixtures. The rate constants of the piperidino-catalyzed rearrangement of the Z-phenylhydrazone of the 3-benzoyl-5-phenyl-1,2,4-oxadiazole into the relevant 4-benzoylamino-2,5-diphenyl-1,2,3-triazole as well as the spectrometric properties of pyrene and Nile Red were evaluated. With the same purpose also ¹H NMR and conductivity measurements were carried out. By comparison the behaviour of 1-butyl-3-methylimidazolium bis-(trifluoromethylsulfonylimide)/1,4-dioxane mixtures has been analyzed. The whole of data confirms the presence of weak interactions that determine a partially preorganized structure for [bmim][X]. This is perturbed at some degrees by quantity and nature of guest molecules. For example conductivity measurements support the idea that different charged aggregates are present in the [bmim][X]/co-solvent binary mixtures.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

Solubility of CO2 in imidazolium-based tetrafluoroborate ionic liquids

The solubility of CO₂ in imidazolium ionic liquids (ILs), 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF₄]), 1-hexyl-3-methyl imidazolium tetrafluoroborate ([hmim][BF₄]) and 1-octyl-3-methyl imidazolium tetrtafluoroborate ([omim][BF₄]) was determined at 305-25 K and pressures from 1 to 9 MPa. The influence of chain length of alkyl substituents on the imidazolium cation on the solubility of CO₂ was investigated. The differences in solubility with chain length are in the sequence [omim][BF₄] > [hmim][BF₄] > [bmim][BF₄]. The solubility data were correlated by the extended Henry's law, and enthalpy, Gibbs free energy and entropy changes were obtained.