Advances in molecular techniques for the detection and quantification of genetically modified organisms

Progress in genetic engineering has led to the introduction of genetically modified organisms (GMOs) whose genomes have been altered by the integration of a novel sequence conferring a new trait. To allow consumers an informed choice, many countries require food products to be labeled if the GMO content exceeds a certain threshold. Consequently, the development of analytical methods for GMO screening and quantification is of great interest. Exponential amplification by the polymerase chain reaction (PCR) remains a central step in molecular methods of GMO detection and quantification. In order to meet the challenge posed by the continuously increasing number of GMOs, various multiplex assays have been developed for the simultaneous amplification and/or detection of several GMOs. Classical agarose gel electrophoresis is being replaced by capillary electrophoresis (CE) systems, including CE chips, for the rapid and automatable separation of amplified fragments. Microtiter well-based hybridization assays allow high-throughput analysis of many samples in a single plate. Microarrays have been introduced in GMO screening as a technique for the simultaneous multianalyte detection of amplified sequences. Various types of biosensors, including surface plasmon resonance sensors, quartz crystal microbalance piezoelectric sensors, thin-film optical sensors, dry-reagent dipstick-type sensors and electrochemical sensors were introduced in GMO screening because they offer simplicity and lower cost. GMO quantification is performed by real-time PCR (rt-QPCR) and competitive PCR. New endogenous reference genes have been validated. rt-QPCR is the most widely used approach. Multiplexing is another trend in this field. Strategies for high-throughput multiplex competitive quantitative PCR have been reported.     

Capillary electropherograms for restriction fragment length polymorphism of Helicobacter pylori

Rapid identification of Helicobacter pylori strains is of importance for diagnosis and then treatment of duodenal and gastric ulcers. We developed a CE approach for the analysis of RFLP of the PCR products of urease (UreAB) gene and flagellin A (FlaA) gene fragments. Prior to CE analysis, the 2.4-kbp UreAB and 1.5-kbp FlaA PCR products were digested with the restriction enzymes HaeIII and HhaI, respectively. The DNA fragments were then separated by CE in conjunction with laser-induced fluorescence detection using poly(ethylene oxide) in the presence of electroosmotic flow. The DNA fragments range in sizes 259-1831 bp and 12-827 bp for UreAB and FlaA restriction fragments, respectively. Of 27 samples, the CE approach provided five and ten different RFLP patterns of the HaeIII and HhaI digests. The RFLP of PCR products of the two genes allow great sensitivity of identification of H. pylori strains. When compared with slab gel electrophoresis, the present CE approach provides advantages of rapidity (within 6 min per run), simplicity, and automation. The preliminary results have shown great practicality of the CE approach for screening H. pylori strains.     

Capillary electrophoresis with dual laser detection in separation of amplified fragment length polymorphism fragments

We are presenting the application of CE technique with dual‐channel LIF detection for the simultaneous separation of DNA fragments labeled with two different fluorescence dyes. The optimal conditions of the analysis were determined for the separation of amplified fragment length polymorphism (AFLP) fragments labeled with 5′‐6‐carboxyfluorescein (6‐FAM) and the DNA size standard labeled with sulfoindocyanine succinimidyl ester (Cy‐5). CE equipped with both argon ion and diode lasers is a good alternative for sequencers and might be applied in analyses of PCR products generated by various fingerprinting methods.     

Determination of PCR products by CE with contactless conductivity detection

The use of CE with contactless conductivity detection for the determination of PCR products is demonstrated for the first time. The separation of specific length PCR products according to their size could be achieved using 5% PVP as a sieving medium in a separation buffer consisting of 20 mM Tris and 20 mM 2‐(cyclohexylamino)ethansulphonic acid (pH 8.5). A fused silica capillary of 60 cm length and 50 μm id and an applied separation voltage of –15 kV were employed and separations could be completed within 20–50 min. PCR amplified DNA fragments of different sizes obtained from different bacterial plasmid templates as well as a fragment from genomic DNA of genetically modified soybeans could be successfully identified.     

Genetic mutation analysis by CE with LIF detection using inverse-flow derivatization of DNA fragments

Inverse-flow derivatization is a novel approach to obtain fluorescent DNA derivatives in DNA analysis based on CE with LIF detection. In the present work, we want to explore the feasibility of the application of this method into the mutation detection based on constant denaturant capillary electrophoresis (CDCE) and SSCP analysis. The DNA fragments were first amplified by PCR using a pair of common primers without fluorescent label, and then the mutations were determined by CDCE or SSCP analysis based on CE-LIF with inverse-flow derivatization of DNA fragments. The experimental conditions were investigated systematically, and different labeling modes including inverse-flow derivatization, on-column derivatization and fluorescent labeled primer technique were compared. The inverse-flow derivatization was successfully used in the detection of C677T mutation in the methylenetetrahydrofolate reductase gene by CDCE or SSCP analysis. Our preliminary results demonstrate that inverse-flow derivatization is very simple, inexpensive and sensitive and well suitable for the genetic analysis in clinical diagnosis.     

CE - a multifunctional application for clinical diagnosis

CE has been used widely as an analytical tool with high separation power taking advantage of size, charge-to-size ratio, or isoelectric point of various analytes. In combination with detection methods, such as UV absorption, electrochemical detection, fluorescence, or mass spectrometry (MS), it allows the separation and detection of inorganic and organic ions, as well as complex compounds, such as polypeptides, nucleic acids, including PCR amplicons from viruses or bacteria. Recent interest in identification of biomarkers of diseases using body fluids leads to development of CE-MS techniques. These applications allowed identification of new potential biomarkers for clinical diagnosis and monitoring of therapeutic interventions. In this report, we present a technical overview of various CE techniques and discuss their applications in clinical medicine.     

Single nucleotide polymorphism detection in the hMSH2 gene using conformation-sensitive CE

CE allows for highly reproducible analysis of DNA fragments which can be used to detect DNA mutations including SNPs. We have utilized a simple and direct CE analysis method for SNP analysis called conformation-sensitive CE (CSCE), based on the principle of single nucleotide different to produce conformational changes in the mildly denaturing solvent system. This method was applied to analysis of a mutation in the promoter region of the hMSH2 gene. This gene belongs to the human DNA mismatch repair system, which is responsible for recognizing and repairing mispaired nucleotides, and mutations in the hMSH2 gene are known to cause hereditary nonpolyposis colorectal cancer (HNPCC). PCR fragments generated from the promoter region of the hMSH2 gene, displaying either a C/C homozygote, C/T heterozygote, or T/T homozygote genotype, did not require further pretreatment before electrokinetic injection. The CE separation, using a 1xTris-borate-EDTA (TBE) buffer containing 3% w/v hydroxylethyl cellulose (HEC) and 6 M urea, was performed under reverse polarity with a separation temperature of 15 degrees C. The genotypes of 204 healthy volunteers and 13 colorectal cancer patients were determined using CSCE, and the results confirmed by DNA sequencing. While the CSCE separations were shown to be highly reproducible and sensitive for screening large populations, no correlation was observed between cancer patients and this hMSH2 gene polymorphism.     

Application of capillary electrophoresis for the early diagnosis of cancer

Early diagnosis is the key to the effective treatment of cancer. The detection of cancer biomarkers plays a critical role not only in cancer early diagnosis, but also in classification and staging tumor progression, or assessment prognosis and treatment response. Currently, various molecular diagnostic techniques have been developed for cancer biomarker studies, with many of the more effective approaches requiring a separation step before detection. Capillary electrophoresis (CE) can perform rapid and efficient separation with small samples, which is well-suited for analysis of both small- and macro- molecule biomarkers in complex samples. CE has different separation modes and can couple to different detectors into a variety of platforms, such as conducting studies on DNA/ RNA point mutation, protein misexpression, and metabolite abnormality. Similarly, microchip capillary electrophoresis (MCE) appears as a very important biomarker screening platform with the merits of high throughput, integration, and miniaturization, which makes it a promising clinical tool. By hyphenated different detectors, or integrated with immunoassay, PCR/LDR and related technologies, MCE can be constructed into diverse platforms used in genomics, proteomics, and metabolomics study for biomarkers discovery. The multiplex biomarker screening approach via CE- or MCE-based platforms is becoming a trend. This paper focuses on studies of cancer biomarkers via CE/MCE platforms, based on the studies published over the past 3 years. Some recent CE applications in the field of cancer study, such as cancer theranostics, are introduced.     

Comparative analysis of CE‐SSCP to standard RFLP‐CE‐FLA method in quantification of known viral variants within an RNA virus quasispecies

RNA viruses display the highest replication error rate in our biosphere, leading to highly diverse viral populations termed quasispecies. The gold standard method for detection and quantification of variants in a quasispecies is cloning and sequencing, but it is expensive, laborious and time consuming. Therefore, other mutation detection approaches, including SSCP, are often used. In this study, we demonstrate development and the usage of a CE‐SSCP method for quantification of two nearly identical viral variants in heterogenic population of a mumps virus strain and its comparison to RFLP‐CE‐fragment length analysis (RFLP‐CE‐FLA). Analyzed PCR fragments were of the same size (245 bp) with one difference in their nucleotide sequence. The limit of detection of both methods was at 5% of the minor variant. When PCR amplicons of the two variants were pooled, methods' results were very similar. On the contrary, the quantification results of samples in which variants were mixed prior to PCR showed substantial difference between the two methods. Our results indicate that although both methods can be used for detection and monitoring of a specific mutation within a viral population, caution should be taken when quantitative analysis of complex samples is based solely on results of one method.     

Low viscosity DNA sieving matrices for capillary electrophoresis

The rapid development of DNA capillary electrophoresis (CE) technology has increased the demand of new low viscosity sieving matrices with high separation capacity. The high throughput, resolution and automatic operation of CE systems have stimulated the application of the technique to different kinds of DNA analysis, including DNA sequencing, separation of restriction fragments, PCR products and synthetic oligonucleotides. In addition specific methods for PCR-based mutation assays for the study of known and unknown point mutations have been developed for use in CE. The key component for a large scale application of CE to DNA analysis is the availability of appropriate sieving matrices. This article gives an overview of the linear polymers used as DNA separation matrices with particular emphasis on the polymers that combine high sieving capacity, low viscosity and chemical resistance.     

Inverse-flow derivatization for capillary electrophoresis of DNA fragments with laser-induced fluorescence detection

A novel method is presented to detect DNA fragments separated by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection using inverse-flow derivatization. In electrophoresis, the intercalating dye, thiazol orange was only added to the separation buffer at the positive polarity. The negatively charged DNA fragments migrated from the negative polarity to the positive polarity, while the positively charged dye migrated in the opposite direction. When DNA fragments met with dye ions, the DNA–dye complexes were formed. The complexes continued migrating to the positive end, due to their net negative charges. When the complexes passed through the detection window, the fluorescent signals were generated. Importantly, DNA fragments migrated as their native state before DNA–dye complexes were formed. This procedure was used to detect double stranded DNA (dsDNA) and single stranded DNA (ssDNA) fragments, and polymerase chain reaction (PCR) products. The excellent resolution and good reproducibility of DNA fragments were achieved in non-gel sieving medium. This procedure may be useful in genetic mutation/polymorphism detections.     

CE combined with rolling circle amplification for sensitive DNA detection

Here we describe an assay which combines CE with rolling circle amplification (RCA) for sensitive DNA detection and quantification. RCA is an isothermal DNA replication technique that generates a long ssDNA with tandem repeats. It requires simpler temperature control in reaction and offers higher sequence specificity and greater quantitation capability compared to other amplification technologies. In this study, RCA amplified the DNA target via a circular template, and the product was digested into monomers for CE analysis. Less than 2 fmol of the DNA target could easily be detected using this RCA-CE assay and the assay has a dynamic range of two orders of magnitudes. Moreover, simultaneous detection of both the target DNA and the internal standard was achieved by designing two padlock probes with different sizes, which could significantly improve the quantification accuracy. The RCA-CE assay is easy to perform, readily adaptable for detection of multiple targets because of the high resolution power of CE, and is compatible with other applications employing RCA as a signal amplification tool. Additionally, this assay can be used with a capillary array system to perform sensitive, high-throughput genetic screening.     

Analysis of DNA restriction fragments and polymerase chain reaction products by capillary electrophoresis

Capillary electrophoresis (CE) is a new, high-resolution tool for the analysis of DNA restriction fragments and DNA amplified by the polymerase chain reaction (PCR). By combining many of the principles of traditional slab gel methods in a capillary format, it is possible to perform molecular size determinations of human and plant PCR amplification products and DNA restriction fragments. DNA restriction fragments and PCR products were analyzed by dynamic sieving electrophoresis (DSE) and capillary gel electrophoresis (CGE). As part of this study, sample preparation procedures, injection modes, and the use of molecular mass markers were evaluated. Optimum separations were performed using the uPage-3 (3% T, 3% C) CGE columns with UV detection at 260 nm. Membrane dialysis and ultrafiltration/centrifugation proved to be nearly equivalent methods of sample preparation. Reproducibility studies demonstrated that blunt-ended, non-phosphorylated markers (specifically allele generated markers) provide the most accurate calibration for PCR product analysis. This study demonstrates that CE offers a high-speed, high-resolution analytical method for accurately determining molecular size and/or allelic type as compared with traditional methodologies.     

基于毛细管电泳的天然产物中酶抑制剂筛选研究进展

人类疾病的发生往往与体内各种酶的功能失调密切相关,因此酶一直是目前新药研发的重要靶标。天然产物是发现新药的宝贵资源,但是由于成分复杂,活性筛选一直受制于耗时费力的分离纯化过程。毛细管电泳（CE）技术由于具有样品和试剂消耗少、灵活多样的分离模式且不受样品基质干扰的特点,可以直接从粗提物开始筛选活性成分,在复杂样品活性筛选中显示出独特的优势。该文综述了近十年来CE在天然产物中酶抑制剂筛选的研究进展。其中重点介绍了CE应用于重要药物靶标,包括转移酶（激酶）、水解酶以及氧化还原酶等方面的应用,总结了用于酶抑制剂筛选的电泳分离模式和酶动力学研究,并展望了CE用于天然产物中活性成分筛选的应用前景。     

Single-molecule immunoassay and DNA diagnosis

Many assays relevant to disease diagnosis are based on electrophoresis, where the migration velocity is used for distinguishing molecules of different size or charge. However, standard gel electrophoresis is not only slow but also insensitive. We describe a single-molecule imaging procedure to measure the electrophoretic mobilities of up to 100000 distinct molecules every second. The results correlate well with capillary electrophoresis (CE) experiments and afford confident discrimination between normal (16.5 kbp) and abnormal (6.1 kbp) mitochondrial DNA fragments, or beta-phycoerythrin-labeled digoxigenin (BP-D) and its immunocomplex (anti-D-BP-D). This demonstrates that virtually all electrophoresis diagnostic protocols from slab gels to CE should be adaptable to single-molecule detection. This opens up the prossibility of screening single copies of DNA or proteins within single biological cells for disease markers without performing polymerase chain reaction (PCR) or other biological amplification.     

Rapid separation and laser-induced fluorescence detection of mutated DNA by capillary electrophoresis in a self-coating, low-viscosity polymer matrix

The detection of point and other simple mutations in DNA is important for cancer research and diagnosis and other biological studies. Capillary electrophoresis has been successfully used for separating DNA fragments. However, a low-viscosity polymer sieving buffer for DNA separation with on-line coating has never been reported. In this paper, a new method using capillary electrophoresis with on-line coating and laser-induced fluorescence detection (CE-LIF) for screening for point or simple DNA mutations has been demonstrated. The method uses an on-line dynamic coating technique that increases capillary lifetime and analysis reproducibility, and employs a low-viscosity polymer solution, which allows the user to rinse the capillary rapidly and refill with polymer solution easily. Experiments proved that the additives in the separation buffer for on-line capillary coating do not affect the separation efficiency of the running buffer, and do not interfere with the formation of hydrogen-bonded network between boric acid, mannitol and hydroxypropylmethylcellulose polymers. The stability of the dynamically coated capillary was quantitatively studied; the capillary lifetime was increased 6- to 7-fold compared with that of permanently coated CE columns. Standard DNA fragments containing mutations, with sizes of 209, 219, and 338 bps, were successfully separated and detected with this system, after the mutated DNA fragments were cleaved by CEL-I endonuclease. The technique is very sensitive for the size-separation of low-range, middle-range, and high-range DNA fragments. Results were compared with the HPLC methods developed by Transgenomic, Inc. and were in good agreement. The method should be applicable to mutation detection for all relevant biological and clinical studies. The factors influencing separations and the stability of dynamic capillary coatings are also discussed in the paper.     

Use of multiplex PCR and CE for gene dosage quantification and its biomedical applications for SMN, PMP22, and alpha-globin genes

Many genetic diseases are caused by the presence of point mutations, small insertions, and deletions in respective genes, and the number of diseases known to be caused by deletions and duplications involving large DNA genomes is increasing. These changes lead to underexpression or overexpression of the gene, according to changes in gene dosage. The methods for the detection of point mutations, small insertions, and deletions are well established, but the detection of larger genomic deletions or duplications is more difficult. Due to the lack of efficient and technically feasible protocols for gene dosage quantification, we describe a diagnostic protocol employing a combination of available methods. The efficient and accurate gene dosage quantification platform is combined with multiplex PCR and CE, and applied to detect dosages of several genes, including SMN, PMP22, and alpha-globin genes. The reliability of this novel methodology shows that it is a relatively speedy and low-cost procedure and a significant tool for genetic diagnosis. Its sensitivity and specificity for identifying deletion and duplication genotypes approach 100%. Moreover, once we establish this powerful system, we will further apply this technique to the rapid detection of trisomy syndromes and microdeletion syndromes, including trisomy 13, Down syndrome, DiGeorge syndrome, and others.     

Multiplex polymerase chain reaction analysis of Glu-1 high-molecular-mass glutenin genes from wheat by capillary electrophoresis with laser-induced fluorescence detection

The unique bread-making properties of wheat are closely correlated with composition and quantity of high-molecular-mass (HMW) glutenin subunits encoded by the Glu-1 genes. We report the development of a multiplex polymerase chain reaction (PCR) method to identify bread wheat genotypes carrying HMW glutenin allele composition of Glu-1 complex loci (Glu-A1, Glu-B1 and Glu-D1) by capillary electrophoresis(CE) with laser-induced fluorescence (LIF) detection. Two triplex primer sets of HMW glutenin subunit genes were examined. An automated and rapid CE-LIF technique is helpful in the multiplex PCR optimization process. Two fluorescent intercalating dyes (EnhanCE, and YO-PRO-1) are compared for detection of DNA fragments. Amplified DNA fragments of HMW glutenin Glu-1 genes were well separated both by agarose slab-gel electrophoresis and CE, and revealed minor differences between the sequences of 1Ax2*, 1Axnull, 1Bx6, 1Bx7, 1Bx17 and 1Dx5 genes. Moreover, CE technique requires samples of smaller volumes in comparison to slab-gel electrophoresis, and data can be obtained in less than 20 min. There was a very high concordance in the assessment of the molecular size of PCR-generated DNA markers. Fast and accurate identification of molecular markers of Glu-1 genes by CE-LIF can be an efficient alternative to standard procedure separation for early selection of useful wheat genotypes with good bread-making quality.     

Portable capillary electrophoresis system with potential gradient detection for separation of DNA fragments

A portable capillary electrophoresis (CE) system with a novel potential gradient detection (PGD) was utilized to separate DNA fragments. For the first time it was demonstrated that separation of DNA fragments in polymer solution could be detected by a portable CE system integrated with PGD, with a limit of detection (LOD) comparable to that of the CE-ultraviolet (UV) method. Effects of buffer solution, sieving medium, and applied voltage were also investigated. The portable CE-PGD system shows several potential advantages, such as simplicity, cost effectiveness, and miniaturization.