Vibroacoustic comparisons of composite laminated cylindrical shells according to three shear deformation shell theories

Whether the first-order and Reddy third-order shear deformation shell theories are able to evaluate the vibroacoustic responses of laminated cylindrical shells with normal deformation in the high frequency range or not is examined by comparison with a 3D higher-order shear deformation shell theory. The implicit governing equations of arbitrary angle-ply laminated cylindrical shells are derived from the 3D higher-order and Reddy third-order shell theories, and solved on the basis of the Fourier transform. The Reddy third-order shell theory can be obtained as a special case from the 3D higher-order shell theory. The first-order and Reddy third-order shell theories almost give rise to the same vibrational and acoustic results. These two simple shear deformation shell theories can be used to study far-field acoustic radiation from laminated cylindrical shells from the low to high frequency range, but they show some differences from the 3D higher-order shell theory in high frequency vibration of shells. Nevertheless, the differences of vibrational responses seem not to be distinct. The helical wave spectra of the higher-order radial displacements are nearly separate from those of the low-order radial displacement and play a minor role in far-field acoustic radiation, which makes the two simple shell theories applicable in prediction of acoustic power of the cylindrical shells in the much higher frequency range. Moreover, it also results in the fact that far-field sound is least sensitive in comparison with near-field sound and vibration of shells.     

Large rotations in first-order shear deformation FE analysis of laminated shells

The paper deals with the geometrically non-linear analysis of laminated composite beams, plates and shells in the framework of the first-order transverse shear deformation (FOSD) theory. A central point of the present paper is the discussion of the relevance of five- and six-parameter variants, respectively, of the FOSD hypothesis for large rotation plate and shell problems. In particular, it is shown that the assumption of constant through-thickness distribution of the transverse normal displacements is acceptable only for small and moderate rotation problems. Implications inherent in this assumption that are incompatible with large rotations are discussed from the point of view of the transverse normal strain-displacement relations as well as in the light of an enhanced, accurate large rotation formulation based on the use of Euler angles. The latter one is implemented as an updating process within a Total Lagrangian formulation of the six-parameter FOSD large rotation plate and shell theory. Numerical solutions are obtained by using isoparametric eight-node Serendipity-type shell finite elements with reduced integration. The Riks-Wempner-Ramm arc-length control method is used to trace primary and secondary equilibrium paths in the pre- and post-buckling range of deformation. A number of sample problems of non-linear, large rotation response of composite laminated plate and shell structures are presented including symmetric and asymmetric snap-through and snap-back problems.     

基于Layerwise离散层理论的复合材料夹层板屈曲分析

复合材料夹层结构由于面板和芯层力学特性差异较大,屈曲分析时要分层考虑各层的剪切变形。基于Reddy的Layerwise离散层理论,假设每一层变形服从一阶剪切变形理论,在统一的位移场描述下,推导建立了一种用于复合材料夹层结构屈曲分析的四节点四边形板单元,并采用混合插值方法对单元的剪切锁定进行了修正。分别对三种典型的夹层板结构进行线性屈曲有限元分析,并将计算结果与文献中已有结果进行了对比。结果表明：本文的分析方法能离散考虑各层的力学特性,将结构离散为多层时,计算结果与三维弹性理论或高阶板理论吻合;将结构等效为单层时,计算结果与基于一阶剪切变形理论的文献结构吻合,验证了单元的有效性。     

Stress analysis of functionally graded shells using a 7-parameter shell element

In this paper, finite element stress analysis of functionally graded structures using a high-order spectral/hp shell finite element is presented. The shell element is based on a seven-parameter first-order shear deformation theory in which the seventh parameter, in addition to the usual six degrees of freedom, is the thickness stretch. The continuum shell element is utilized for the numerical simulations of the fully geometrically nonlinear response of functionally graded elastic shell structures. Several nontrivial shell problems are considered to report deflections and stresses, the latter being the main focus of the current paper. It is found that the stresses computed in the current study agree only in some cases with those of ANSYS and/or ABAQUS and thus requires additional study to determine the cause of the disagreement.     

Corotational nonlinear analyses of laminated shell structures using a 4-node quadrilateral flat shell element with drilling stiffness

A new 4-node quadrilateral flat shell element is developed for geometrically nonlinear analyses of thin and moderately thick laminated shell structures. The fiat shell element is constructed by combining a quadrilateral area co- ordinate method （QAC） based membrane element AGQ6- II, and a Timoshenko beam function （TBF） method based shear deformable plate bending element ARS-Q12. In order to model folded plates and connect with beam elements, the drilling stiffness is added to the element stiffness matrix based on the mixed variational principle. The transverse shear rigidity matrix, based on the first-order shear deformation theory （FSDT）, for the laminated composite plate is evaluated using the transverse equilibrium conditions, while the shear correction factors are not needed. The conventional TBF methods are also modified to efficiently calculate the element stiffness for laminate. The new shell element is extended to large deflection and post-buckling analyses of isotropic and laminated composite shells based on the element independent corotational formulation. Numerical re- sults show that the present shell element has an excellent numerical performance for the test examples, and is applicable to stiffened plates.     

复合材料层合板的摄动随机Cell-Based光滑有限元

随机性是实际工程结构的固有特性,如何更真实地描述含随机参数结构的随机响应及统计特性,对工程结构的可靠性设计具有非常重要的意义。本文基于Cell-Based光滑有限元,采用四边形单元,推导了基于一阶剪切变形理论的复合材料层合板的光滑有限元公式,降低了网格划分要求,适应不规则网格,并采用离散剪切间隙有效地消除了剪切自锁;结合摄动法和随机场理论,导出了复合材料层合板的摄动随机光滑有限元平衡方程,并给出了结构随机响应数字特征的计算公式,求解了材料属性含随机性的复合材料层合板的随机响应问题,数值算例结果表明了本方法的有效性和准确性。     

On the use of solid- and shell-type finite elements in creep-damage predictions of thinwalled structures

Summary  Solid- and shell-type finite elements available for plasticity and creep analysis are applied to the creep-damage prediction of a thinwalled pipe bend under uniform internal pressure. Conventional creep-damage material model with scalar damage parameter is used. Based on the comparative numerical study, performed using solid and shell elements, the applicability frame of the shell concept is discussed. Particularly, if a dependence on the stress state is included in the material model, the cross-section assumptions of the first-order shear deformation theory should be refined. The possibilities to modify the through-thickness approximations are demonstrated on the beam equations. The first-order shear-deformation beam theory is discussed in detail. It is shown that if the damage evolution significantly differs for tensile and compressive stresses, the classical parabolic transverse shear-stress distribution and the shear-correction coefficient have to be modified within time-step simulations. Received 30 January 2000; accepted for publication 30 May 2000     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

Finite deformation plate theory and large rigid-body motions

A refined non-linear first-order theory of multilayered anisotropic plates undergoing finite deformations is elaborated. The effects of the transverse shear and transverse normal strains, and laminated anisotropic material response are included. On the basis of this theory, a simple and efficient finite element model in conjunction with the total Lagrangian formulation and Newton-Raphson method is developed. The precise representation of large rigid-body motions in the displacement patterns of the proposed plate elements is also considered. This consideration requires the development of the strain-displacement equations of the finite deformation plate theory with regard to their consistency with the arbitrarily large rigid-body motions. The fundamental unknowns consist of six displacements and 11 strains of the face planes of the plate, and 11 stress resultants. The element characteristic arrays are obtained by using the Hu-Washizu mixed variational principle. To demonstrate the accuracy and efficiency of this formulation and compare its performance with other non-linear finite element models reported in the literature, extensive numerical studies are presented.     

Nonlinear transient dynamic response of damped plates using a higher order shear deformation theory

Damped transient dynamic elasto-plastic analysis of plate is investigated. A finite element model based on a C ⁰ higher order shear deformation theory has been developed. Nine noded Lagrangian elements with five degrees of freedom per node are used. Selective Gauss integration is used to evaluate energy terms so as to avoid shear locking and spurious mechanisms. Von Mises and Tresca yield criteria are incorporated along with associated flow rules. Explicit central difference time stepping scheme is employed to integrate temporal equations. The mass matrix is diagonalized by using the efficient proportional mass lumping scheme. A program is developed for damped transient dynamic finite element analysis of elasto-plastic plate. Several numerical examples are studied to unfold different facets of damping of elasto-plastic plates.     

Six-variable geometrical nonlinear laminated theory for large deformation

A six-variable geometrical nonlinear shear deformation laminated theory is presented by which normal stress and strain distribution can be calculated. By considering some affective factors that were neglected under the finite deformation condition, an improved von Karman geometrical nonlinear deformation-strain relation is used for large deformation analysis. After analyzing the bending problem of laminated plates, and comparing it with 3-D elasticity solutions and J. N. Reddy five-variable simple higher-order shear deformation laminated theory, we can conclude that a satisfactory calculation precision has been achieved, which shows that it is especially suitable for the calculation in the condition of large deformation and the laminated thick plate analysis.     

层合板六参量几何非线性高阶剪切理论

提出了层合板六参量的高阶剪切变形理论的位移场假定,以考虑在大变形条件下层合板法向变形和厚度的变化。同时对ｖｏｎ Ｋａｒｍａｎ应变位移简化假设进行补充修改,考虑某些有限变形条件下被忽略小量的影响,建立了对应于该文六参量模型和更加适凳大变形分析的层合板几何非线性关系,平衡方程和边界条件。利用该文模型分析了橡胶复合材料简支板的大变形弯曲行为,并对比Ｒｅｄｄｙ五参量几何非线性简单高阶剪切变形层合理论解和弹     

Geometrically non-linear transient analysis of laminated,doubly curved shells

A dynamic, shear deformation theory of a doubly curved shell is used to develop a finite element for geometrically non-linear (in the von Karman sense) transient analysis of laminated composite shells. The element is employed to determine the transient response of spherical and cylindrical shells with various boundary conditions and loading. The effect of shear deformation and geometric non-linearity on the transient response is investigated. The numerical results presented here for transient analysis of laminated composite shells should serve as references for future investigations.     

Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory

In the present article, axisymmetric bending and stretching of functionally graded (FG) circular plates subjected to uniform transverse loading based on fourth-order shear deformation plate theory (FOST) have been studied. Using a fourth-order shear deformation theory, the solutions for deflection and rotation functions of FG plates are presented in terms of the corresponding quantities for a homogeneous plate using the classical plate theory (CPT), from which solutions one can easily obtain the FOST solutions for axisymmetric bending of FG circular plates. It is assumed that the effective mechanical properties of the functionally graded plates through the thickness are continuous functions of the volume fractions of the constituent parts which are themselves defined by a power-law function. Numerical results for maximum deflection and shear stress are presented for various percentages of ceramic–metal volume fractions. These results are also compared with those obtained from the first-order shear deformation plate theory of Mindlin (FST), the third-order shear deformation plate theory of Reddy (TST) as well as the exact three-dimensional elasticity solution. It is found that although the maximum deflections obtained using FOST and TST are close to each other, the through-thickness shear stress is predicted more accurately by the FOST formulation than by the TST.     

An analytical solution of rectangular laminated plates by higher-order theory

I.IntroductionSincecompositematerialshavesuperiormechanicalproperties,theyarewidelyconcernedbytechnicians.Fromtheclassicallaminatetheorytothefirst-ordersheardeformationtheoryandfromthehigher-ordertheorytotheelasticitytheory,thetheoriesoflaminatedplatesofcompositemeterialsgetfastdevelopment.TheNaviersolutionofsimplysupportedrectangularplateswasdevelopedbyWhitneyandLeissalllforclassicallaminatetheory.TheNaviersolutionwasdevelopedbyWhitneyandPaganol'1forthefirst-ordersheardeformationtheory.Th…     

Postbuckling analysis of axially loaded functionally graded cylindrical panels in thermal environments

A postbuckling analysis is presented for a functionally graded cylindrical panel of finite length subjected to axial compression in thermal environments. Material properties are assumed to be temperature dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The governing equations of a functionally graded cylindrical panel are based on Reddy’s higher order shear deformation shell theory with a von Kármán–Donnell-type of kinematic nonlinearity and including thermal effects. Two cases of the in-plane boundary conditions are considered. The nonlinear prebuckling deformations and initial geometric imperfections of the panel are both taken into account. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical panels under axial compression. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of axially loaded, perfect and imperfect, functional graded cylindrical panels with two constituent materials and under different sets of thermal environments. The influences played by temperature rise, volume fraction distributions, the character of in-plane boundary conditions, transverse shear deformation, panel geometric parameters, as well as initial geometric imperfections are studied.     

Coupled thermoelasticity of functionally graded cylindrical shells

The coupled thermoelastic response of a functionally graded circular cylindrical shell is studied. The coupled thermoelastic and the energy equations are simultaneously solved for a functionally graded axisymmetric cylindrical shell subjected to thermal shock load. A second-order shear deformation shell theory that accounts for the transverse shear strains and rotations is considered. Including the thermo-mechanical coupling and rotary inertia, a Galerkin finite element formulation in space domain and the Laplace transform in time domain are used to formulate the problem. The inverse Laplace transform is obtained using a numerical algorithm. The shell is graded through the thickness assuming a volume fraction of metal and ceramic, using a power law distribution. The results are validated with the known data in the literature.     

黏弹性层合悬臂薄壁圆柱壳的模态特性研究

基于薄壳理论和黏弹性理论, 得出了黏弹性层合悬臂薄壁圆柱壳模态特性的半解析解. 根据乐甫薄壳理论, 建立了基层和黏弹性阻尼层薄壁圆柱壳的一阶状态微分方程, 结合黏弹性阻尼层的变形协调关系和层间作用力关系, 利用传递矩阵法得出了整体结构的传递矩阵, 采用高精度的精细积分法得出了固有频率、模态损耗因子和三维模态振型, 最后通过有限元法进行了比较, 通过算例验证了传递矩阵法对黏弹性层合薄壁圆柱壳模态特性研究的有效性.