Dynamic cross‐links to facilitate recyclable polybutadiene elastomer with excellent toughness and stretchability

A facile cross‐linking strategy of using small molecules as physcial crosslinkers to facilitate recyclable polybutadiene (PB) elastomer with excellent toughness and stretchability is demonstrated. Carboxylic acid groups were incorporated along the PB backbone via thiol‐ene reaction, and then the polymer can be cross‐linked by ionic hydrogen bonds between the carboxylic acid groups from PB and the amine groups of the cross‐linkers. The ionic hydrogen bonds can dynamiclly break and reconstruct upon deformation, thus endowing the resultant polymer with not only high toughness and stretchability (～1800%), but also good self‐recovery and enhanced damping properties. Remarkably, the dynamically cross‐linked PB elastomer can be thermally recycled owing to the thermal reversibility of the ionic hydrogen bonds and the mechanical properties can be largely recovered after reprocessing. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1357‐1366     

A facile and controllable synthesis of dual‐crosslinked elastomers based on linear bifunctional polydimethylsiloxane oligomers

Dual‐crosslinked supramolecular elastomers with the hybrid network consisting of hydrogen bonds and covalent bonds combine the reversibility of hydrogen bond and mechanical properties of covalent crosslinking network. In this article, isocyanate mixture is used as curing agent to prepare dual‐crosslinked elastomer based on bifunctional polydimethylsiloxane under mild condition. This method can effectively build up a hybrid network with the designed structure. A series of elastomers with same hydrogen bond density and variable covalent crosslinking degree are obtained. Swelling measurements and ¹H‐NMR spectra confirm the feasibility and controllability of curing method, the increasing of bifunctional isocyanate give rise to higher covalent crosslinking degree, improving the solvent resistance. The studies on viscoelastic property show that the introduction of an irreversible covalent crosslinking network stabilize the hybrid network, restrain the chain movement. The mechanical and self‐healing property studies reveal that the covalent crosslink significantly reinforce the whole network, while the reparable strength seems to mainly depend on the hydrogen bond density. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3760–3768     

Dynamic elastomers based on bio-derived crosslinker

Petroleum-derived monomers are the most common building blocks for ester-based thermosets. Bio-derived thermoset elastomers are becoming viable alternatives to conventional thermosets. Herein, we developed a biobased vitrimer-type thermoset elastomers using abundant and sustainable raspberry ketone as feedstock. We utilize raspberry ketone to create building blocks for dynamic oxime chemistry and crosslinked these through free radical polymerization with poly(ethylene glycol) methyl ether methacrylate as a comonomer. In contrast to other dynamic networks based on ester bonds, which need catalysts, this is undesirable since catalyst deactivation or leaching lowers its effect over time and may impair reuse. This network incorporates catalyst-free bond exchange reactions in catalyst-dependent polyester networks by substituting oxime-esters for typical ester linkages. The elastomer exhibits stress relaxation, a low glass transition temperature (T_g) (−55 to −40.2°C) and tensile strength up to 5.2 ± 3.0 kPa. Furthermore, the dynamic oxime transesterification exchange mechanism allows elastomers to be reprocessed using a hot press at 160°C and 8 × 10³ kPa pressure. After reprocessing, the tensile strength of elastomers can be recovered up to 78.1 ± 10.9%. This work integrates the principles of catalyst-free dynamic exchange process and mechanical recycling coupled with biobased components to provide a rational solution towards conventional elastomers. In the future, these elastomers can be exploited for the development of hydrogels, recyclable elastomers, and commodity plastics.     

Bio‐based epoxy vitrimers: Reprocessibility,controllable shape memory,and degradability

The research activities in the development of recyclable and reprocessable covalently crosslinked networks, and the construction of polymers from renewable resources are both stemmed from the economical and environmental problems associated with traditional thermosets. However, there is little effort in combination of these two attractive strategies in material designs. This article reported a bio‐based vitrimer constructed from isosorbide‐derived epoxy and aromatic diamines containing disulfide bonds. The resulted dynamic epoxy resins showed comparable thermomechanical properties as compared to similar epoxy networks cured by traditional curing agent. Rheological tests demonstrated the fast stress relaxation of the dynamic network due to the rapid metathesis of disulfide bonds at temperature higher than glass transition temperature. This feature permitted the recycling and reprocessing of the fragmented samples for several times by hot press. The dynamic epoxy resins also exhibited shape‐memory effect, and it is demonstrated that the shape recovery ratio could be readily adjusted by controlling the stress relaxation in the temporary state at programming temperature. Moreover, the degradability of the dynamic epoxy resins in alkaline aqueous solution was also demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1790–1799     

Supramolecular Silicone Elastomers with Healable and Hydrophobic Properties Crosslinked by “Salt‐Forming Vulcanization”

In this article, supramolecular silicone elastomers with self‐healing function were first prepared by simple and controllable “salt‐forming vulcanization” of polyaminopropylmethylsiloxane with acids. Their structures and micrographs were verified by Fourier transform infrared spectra, Small‐angle X‐ray scattering experiments and atomic force microscope. The experimental results showed that the ion‐association complexes were formed during vulcanization, and the obtained elastomers displayed self‐healing and good mechanical properties even if the cross‐linking agent was excessed. The thermogravimetric analysis showed that the elastomers crosslinked by inorganic acid were stable under high temperature. Unexpectedly, bionic structures were observed in the elastomers, which further changed the hydrophobicity of the surfaces of the elastomers physically. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 903–911     

Molecularly templated reaction for forming poly(dimethyl siloxane)–graphene oxide composite elastomers

This study explores the molecularly templated reaction of pyrene‐terminated telechelic poly(dimethyl siloxane) (PDMS) with graphene oxide (GO) to produce composite elastomers. These materials undergo chemical crosslinking between secondary amides near PDMS chain ends and epoxies on the surface of GO as confirmed by infrared spectroscopy, rheology, gel content, and mechanical property measurements. The incorporation of pyrene end groups introduces π–π interactions with GO surfaces that enhance the reaction efficacy of the nearby secondary amide groups. As a comparison, methoxy‐terminated telechelic PDMS containing the same secondary amides near the chain ends did not exhibit appreciable crosslinking with GO. Depending on the concentration of the amide groups, the pyrene‐terminated PDMS/GO elastomer can be highly crosslinked (e.g., up to 96 wt % gel) but highly extensible (e.g., extensional strains of more than 200%). This general strategy could be implemented using other amide containing polymers to produce a wide range of high‐performance thermosets and elastomers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1406–1413     

Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

Preparation and properties of 1,2‐polybutadiene grafting with poly(1,3‐butadiene)‐block‐(dimethylsiloxane)

The development of silica‐filling elastomers with high mechanical performance and good processability is still a great challenge. In this study, we fabricated siloxane‐grafted atactic 1,2‐polybutadiene (1,2‐PB) rubber through grafting poly(1,3‐butadiene)‐block‐(dimethylsiloxane) (PB‐b‐PDMS) onto 1,2‐PB molecular chains by coordination polymerization using a molybdenum (Mo)‐based catalyst system. The PB‐b‐PDMS with active double bonds was synthesized by anionic polymerization. Fourier transform infrared analysis (FTIR), elementary analysis, and GPC‐MALLS‐viscometer analyses verified the incorporation of PB‐b‐PDMS and the grafting structure in the resulting polymer. Scanning electron microscope (SEM), bound rubber testing, and dynamic mechanical analysis demonstrated that the graft‐modification with PB‐b‐PDMS improved silica dispersity in the 1,2‐PB matrix because the incorporation of siloxane groups provided stronger interfacial interaction with silica. Meanwhile, the graft‐modified 1,2‐PB exhibited lower Mooney viscosity, higher tensile strength, and lower heat build‐up than unmodified 1,2‐PB. This concept provides novel inspiration for the preparation of advanced rubber with promoted silica compatibility and mechanical performance.     

Imine‐linked porous organic polymers showing mesoporous microspheres architectures with tunable surface roughness

Different kinds of porous organic polymers (POPs) bearing 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) fluorophores have been developed to generate singlet oxygen upon light illumination. Herein, four imine‐linked POPs were prepared by copolymerization of amine and aldehyde with different ratios of di‐aldehyde A1 and A2. The POPs were investigated by a combination of techniques such as solid ¹³C NMR, FTIR, and nitrogen absorption–desorption isotherms and electronic microscopy. The results demonstrated that these POPs were prone to form hierarchical porous architectures. Scanning electron microscopy and transmission electron microscopy images revealed that the spherical morphologies showed different roughness, that is, BDP‐POPs with more BDP aldehyde A2 presented rougher surface. Finally, these POPs were used to generate singlet oxygen (¹O₂) monitored by 1,3‐diphenylisobenzofuran and bioimaging in HeLa cells. Our results indicated that the ability to generate ¹O₂ is dependent on the amount of BDP. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 319–327     

Fusion of Different Crosslinked Polymers Based on Dynamic Disulfide Exchange

Crosslinked polymers (CLPs) exhibit exceptional mechanical properties as well as good chemical and solvent resistance. However, their reprocessing, recycling, and modification remain difficult. One promising approach to overcome this limitation is to introduce dynamic covalent bonds that enable chain‐exchange reactions and network‐structure rearrangements in identical polymer networks (A–A fusion), resulting in self‐healing and reprocessing properties. Reported here is the fusion of two distinct polymer networks (A–B fusion) by the dynamic behavior of bis(2,2,6,6‐tetramethylpiperidin‐1‐yl)disulfide (BiTEMPS) at the interface between different CLPs. The appearance, swelling behavior, and mechanical properties of the fused samples indicate exchange reactions of the BiTEMPS units and the formation of topological bonds at the interface, commensurate with the generation of a CLP that exhibits tunable properties.     

Theoretical investigation on enantioselective Biginelli reaction catalyzed by natural tartaric acid

In this study, enantioselective Biginelli reaction of aldehyde, β‐ketoester, and urea catalyzed by natural (2R, 3R)‐tartaric acid has been investigated using density functional theory calculations. The results indicate that the most favorable pathway involves a protonated imine from aldehyde and urea in the first step. Tartaric acid forms H‐bonds network with substrates enhancing the electrophilicity of protonated imine and the nucleophilicity of β‐ketoester. (R)‐3,4‐Dihydropyrimidin‐2‐(1H)‐ones is preferable for the reaction. The solvent effect is discussed in the prediction of enantiomeric excess (ee) values in ethanol and water. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Design and development of self-repairable and recyclable crosslinked poly(thiourethane-urethane) via enhanced aliphatic disulfide chemistry

Thermoset polymer elastomers that are capable of autonomous repairability upon physical damage at ambient temperature are highly desirable because of their thermal and environmental resistance, outstanding mechanical toughness and stability. To aim at this goal, we demonstrated that tris(diethylamino)phosphine was initially proven as an efficient catalyst for the aliphatic disulfide exchange at mild condition. By making use of the aliphatic disulfide bond reshuffling and elasticity of polyurethane elastomers, the inherently cross-linked polysulfide-based poly(thiourethane-urethane) elastomers were prepared and exhibited the ability to mend without extrinsic stimuli in the presence of phosphorus catalyst at room temperature after artificially damaged. The self-healing efficiency via the mechanical recovery approach was investigated to be mainly dependent upon the cross-linking density of polysulfide and hard segments chemistry, which in turns determined the molecular chain diffusion and reshuffling that was corroborated by the stress-relaxation study. The thermoset elastomer based on asymmetric diisocynate showed a maximum self-healing efficiency of 85.6% compared to 71.6% for the elastomer with symmetric monomer building blocks. The self-healable polymer was confirmed to be recyclable and reprocessable through a cut-compression processing cycle under a quite mild pressure and temperature thanks to the disulfide bond reshuffling. Meanwhile, the recycled thermoset elastomer well maintained the mechanical properties to its original material.     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009     

Preparation and properties of novel fluorosilicone thermoplastic vulcanizate with cross‐linking–controlled core‐shell structure

A new fluorosilicone thermoplastic vulcanizate (TPV) composed of poly(vinylidene fluoride) (PVDF), silicone rubber (SR), and fluororubber (FKM) was successfully prepared through dynamic vulcanization. The morphological structure of the TPVs had core‐shell elastomer particles dispersed in a continuous PVDF matrix. Furthermore, the cross‐linking of core‐shell structure was controlled by adopting different curing agent. The effect of cross‐linking–controlled core‐shell structure on the morphology, crystallization behavior, stress relaxation test, solvent‐resistant properties of the obtained TPVs were investigated. It was found that the shell cross‐link had a significant influence on the crystallinity of the PVDF phase. The core‐shell bicross‐linked TPV was found to provide the lowest rate of relaxation. An obvious stress softening phenomenon was observed in the uniaxial loading‐unloading cycles in tension. The bicross‐linked TPV had good solvent resistant properties. The tensile strength of the bicross‐linked TPV was still 12 MPa even after immersed in butyl acetate for 48 hours.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

Enhanced dielectric performance of a block copolymer‐polythiophene nanocomposite

Dielectric elastomer actuators (DEAs) transform electrical energy into mechanical work. However, despite displaying exceptional features, the low permittivity of elastomers restricts their application. Hence, to overcome this limitation, DEAs are fabricated by dispersing poly(3‐methylthiophene acetate) (P3TMA), a polarizable conducting polymer, into poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS), a thermoplastic elastomer with excellent mechanical properties. Although high‐quality SEBS:P3TMA films are obtained for all compositions (between 0.5 and 20 wt % P3TMA), their thickness and surface roughness increase with the nano‐sized filler content. Moreover, the conducting particles are well integrated into the SEBS network with no evidence of aggregation or significant change in the mechanical properties of the composites. P3TMA, which forms encapsulated conductive domains within the polymeric matrix, improves the dielectric behavior of SEBS:P3TMA by increasing their dielectric constant with low dielectric losses and no current leakage. Thus, indicating the potential future application of these nanocomposites as elastomer actuators or high energy density capacitors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1896–1905     

Preparation and properties of a novel polythiophene,poly[(3‐hexyliminomethyl)thiophene] with a high regioregularity

Poly[(3‐hexyliminomethyl)thiophene]s (P3HITs) were synthesized from the polymerizations of 2,5‐dibromo‐(hexyliminomethyl)thiophene and 5‐bromo‐2‐iodo‐3‐(hexyliminomethyl)thiophene by Grignard metathesis method. The corresponding P3HITs with low regioregularity (70%) and high regioregularity (95%) were obtained, respectively. UV–vis and photoluminescence spectra of P3HIT were dependent on the regioregularity and solvent polarity. By hydrolysis of the imino groups in the side chains under acidic conditions, P3HIT was successfully converted into the polythiophene (P3TCHO) having aldehyde groups. This transformation was also performed facilely by exposing the P3HIT film to HCl gas to give the polythiophene having aldehyde moiety. The reverse way from aldehyde to imine was also successfully demonstrated by treating the film with triethylamine vapor. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of transparent thermoplastic polyurethane elastomers

Thermoplastic polyurethanes were synthesized from poly(propylene glycol)‐block‐poly(ethylene glycol) polyols and hybrid hard segments that combined at least two different chain extenders. The combination of hard segments allowed for modification of elastomer performance and processing not achievable by any single hard segment. The combination of hard segments modulated hard‐segment energies that were directly related to elastomer performance. Special attention is paid to obtaining optically transparent elastomers with this technique. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 271–278, 2004     

Semi‐interpenetrating polymer networks of methyl cellulose and polyacrylamide prepared by frontal polymerization

In this study, the feasibility of frontal polymerization (FP) as an alternative and convenient technique for the preparation of semi‐interpenetrating polymer networks made of methyl cellulose (MC) and cross‐linked polyacrylamide (PAAm) is demonstrated. FP was performed in water and glycerol, as largely available, nontoxic solvents. Although FP occurred in both media, differences were found by comparing the samples made in the two solvents. In particular, those prepared in water are characterized by larger inhomogeneity and less reproducibility, thus accounting for the boiling effects that influence propagating polymerization fronts when water was used. The effects of the ratio among MC and PAAm, the amount of cross‐linker and solvent medium were studied in terms of influence on temperature and velocity of FP fronts, glass transition temperature (dried samples), swelling behavior, dynamic‐mechanical properties (gels swollen in both water or glycerol), and tensile behavior. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1268–1274