The hydroxyl radical reaction rate constant and products of ethyl 3-ethoxypropionate

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of ethyl 3-ethoxypropionate (EEP, CH₃CH₂(SINGLE BOND)O(SINGLE BOND)CH₂CH₂C(O)O(SINGLE BOND)CH₂CH₃). EEP reacts with OH with a bimolecular rate constant of (22.9±7.4)×10⁻¹² cm³ molecule⁻¹s⁻¹ at 297±3 K and 1 atmosphere total pressure. In order to more clearly define EEP's atmospheric reaction mechanism, an investigation into the OH+EEP reaction products was also conducted. The OH+EEP reaction products and yields observed were: ethyl glyoxate (EG, 25±1% HC((DOUBLE BOND)O)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl (2-formyl) acetate (EFA, 4.86±0.2%, HC((DOUBLE BOND)O)(SINGLE BOND)CH₂(SINGLE BOND)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl (3-formyloxy) propionate (EFP, 30±1%, HC((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₂(SINGLE BOND)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl formate (EF, 37±1%, HC((DOUBLE BOND)O)O(SINGLE BOND)CH₂CH₃), and acetaldehyde (4.9±0.2%, HC((DOUBLE BOND)O)CH₃). Neither the EEP's OH rate constant nor the OH/EEP reaction products have been previously reported. The products' formation pathways are discussed in light of current understanding of oxygenated hydrocarbon atmospheric chemistry. © 1997 John Wiley & Sons, Inc.     

Estimates of the structure and dimerization energy of polyacetylene from ab initio calculations on finite polyenes

Ab initio calculations at the Hartree-Fock (HF) and the second-order Møller-Plesset (MP2) levels are performed for finite polyenes C_2nH_2n+2 to estimate the structure and dimerization energy (E_dim) of polyacetylene. The effect of electron correlation on the structure of finite polyenes is analyzed in detail. The MP3/6–31G* C(DOUBLE BOND)C and C(SINGLE BOND)C bond lengths in polyacetylene are estimated by a simple extrapolation method using empirical corrections for the MP2 deficiencies, yielding values [C(DOUBLE BOND)C(MP3) ∼ 1.36 Å and C(SINGLE BOND)C(MP3) ∼ 1.44 Å] that are in a good agreement with experiment (C(DOUBLE BOND)C (DOUBLE BOND) 1.36 Å and C(SINGLE BOND)C (DOUBLE BOND) 1.44–1.45 Å). Comparison is also made with other theoretical estimates of polyacetylene structure. E_dim is approximated by the energy difference between the equilibrium and hypothetical polyenic structures. It is estimated that E_dim is ∼ 1.4–1.5 kcal/mol (0.06–0.07 eV) per carbon-carbon bond at the HF level with 4–21G and 6–31G* basis sets and ∼ 0.3–0.5 kcal/mol (0.013–0.022 eV) at the MP2 level with the 6–31G* basis set. It is concluded that E_dim is very sensitive to the level of approximation employed so that a proper treatment of electron correlation is essential to obtain a reliable estimate of the dimerization energy. © 1997 John Wiley & Sons, Inc.     

Mechanistic study of the gas-phase decomposition of methyl formate

The major products of the thermal decomposition of methyl formate in the gas phase are CH(3)OH, CH(2)O, and CO. Experimental studies have proposed that the mechanism to describe these observations involves two key steps: (1) unimolecular decomposition of methyl formate to yield CH(3)OH + CO, followed by (2) thermal decomposition of methanol to yield CH(2)O + H(2). The present study shows that there exists an alternative mechanism that is energetically more favorable. The new mechanism involves two competing parallel unimolecular decomposition pathways to yield the observed major products.     

An original route to poly[silylene-co-(2,4-disilapentane-2,4-diyl)] oligomers,efficient precursors of silicon carbide-based ceramics with variable C/Si ratios

Novel oligomers possessing a backbone formed of ((TRIPLE BOND)Si(SINGLE BOND)CH₂(SINGLE BOND)Si(TRIPLE BOND)) and (SINGLE BOND)Si(SINGLE BOND)_n units were prepared by the copolycondensation of bis(chlorosilyl)methanes and various dichlorosilanes in the presence of sodium, in refluxing toluene. The effect of the respective molar ratios of comonomers on the yields and the structure of the copolymers was investigated. The role of substituents on silicon atoms in the ability of these materials to provide convenient ceramic precursors upon pyrolysis was examined. When (TRIPLE BOND)Si(SINGLE BOND)H bonds were present, thermal cross-linking was readily performed and ceramics possessing variable C/Si ratios were prepared.     

Conformers of gaseous protonated glycine

Ab initio geometry optimizations were performed on gaseous protonated glycine using the second-order Møller–Plesset perturbation theory with the 6-31G*, 6-31G**, 6-31+G**, and 6-311+G** basis sets. Eight energy minima and 12 saddle points in the low-energy region of the electronic potential energy surface were characterized. The global minimum was an amino N-protonated conformer containing an ionic H bond between the (SINGLE BOND)NH₃⁺ and O(DOUBLE BOND)C(DIAGONAL BOND)(DIAGONAL BOND) groups. The lowest energy O-protonated conformer was stabilized by a conjugative attraction between the nitrogen lone-pair electrons and the positively charged planar fragment (SINGLE BOND)C(OH)₂⁺. Relative electronic energies of the nine N- and 11 O-protonated species fall in the ranges of 0–10 and 30–40 kcal mol⁻¹. At room temperature the equilibrium distribution contained the most stable N-protonated conformer almost exclusively. Additional subjects for investigation include the effects of basis set and electron correlation on the predicted structures, nonbonded interactions that influence the relative stability of protonated conformers, conformational interconversions based on intrinsic reaction coordinate calculations, and kinetic pathways for protonation and associated changes in Gibbs free energy. The work provides geometric, energetic, and thermodynamic data pertinent to the study of gas-phase ion chemistry of amino acids and peptides. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 1862–1876, 1998     

HNNH3, a new possible isomer of N2H4: An ab initio study

Ab initio studies applying the 3-21G, 6-31G, and 6-31G** basis sets and also including the MP2 correction were carried out on H₂NNH₂, HNNH₃, and the transition state of the reaction H₂NNH₂(DOUBLE BOND)HNNH₃. First, the geometries of molecules were optimized using the theoretical methods mentioned in the restricted Hartree–Fock (RHF) scheme. The energies of the molecules corresponding to RHF/6-31G** geometries were subsequently calculated including electron-correlation effects at the level of the second-order Møller–Plesset (MP2) perturbation theory. The vibrational frequencies, net charges, and dipole moments were obtained from the theoretical calculations. The results of our calculations indicate unambiguously that H₂NNH₂ is thermodynamically more stable than is HNNH₃. On the other hand, an isolated HNNH₃ molecule once created would be stable since barriers for its unimolecular isomerization and decomposition are relatively high. But HNNH₃ is unlikely to be isolated in measurable amounts because of bimolecular tautomerization. Nevertheless, HNNH₃ can be considered as an intermediate in chemical processes involving N₂H₄. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 64 : 447–452, 1997     

Benzazole-N(SINGLE BOND)BH3 adducts. Reductive transposition of 2-benzimidazole, 2-benzothiazole,and 2-benzoxazole N(SINGLE BOND)BH3 adducts to 1,3,2-benzimidazaborole, 1,3,2-benzoxaborole,and 1,3,2-benzothiazaborole

1,3,2-Benzimidazaborole, 1,3,2-benzoxaborole, and 1,3,2-benzothiazaborole were synthesized from the corresponding 2-benzazole N(SINGLE BOND)BH₃ and 2-benzazole S(SINGLE BOND)BH₃ adducts through a reductive transposition from the isolobal fragment X(SINGLE BOND)C(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) B(sp³) (X (DOUBLE BOND) N, O, S) to the fragment X(SINGLE BOND)B(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) C(sp³). N(SINGLE BOND)BH₃ substitution shifts to lower frequencies 4-H, C-3a, and C-7a resonances. The X-ray diffraction analysis of 2-(o-methoxyphenyl)benzothiazole N(SINGLE BOND)BH₃ adduct is reported. Two new tetracyclic boron-bridged compounds were observed as by-products (6,9-(ethyl)-diaza-2-oxa-1-bora[3,4,7,8]-dibenzobycyclo[4.3.0]-nona-3,7-diene, 6d, and 8-aza-9-oxa-2-thia-1-bora-[3,4,7,8]dibenzobycyclo[3.4.0]nona-3,7-diene, 15d, when 2-(o-methoxyphenyl)-1-ethylbenzimidazole-BH₃ 6b and 2-(o-methoxyphenyl)-benzothiazole-BH₃ 15b adducts were heated. © 1996 John Wiley & Sons, Inc.     

Thermal decomposition of ethanol. 4. Ab initio chemical kinetics for reactions of H atoms with CH3CH2O and CH3CHOH radicals

The potential energy surfaces of H-atom reactions with CH(3)CH(2)O and CH(3)CHOH, two major radicals in the decomposition and oxidation of ethanol, have been studied at the CCSD(T)/6-311+G(3df,2p) level of theory with geometric optimization carried out at the BH&HLYP/6-311+G(3df,2p) level. The direct hydrogen abstraction channels and the indirect association/decomposition channels from the chemically activated ethanol molecule have been considered for both reactions. The rate constants for both reactions have been calculated at 100-3000 K and 10(-4) Torr to 10(3) atm Ar pressure by microcanonical VTST/RRKM theory with master equation solution for all accessible product channels. The results show that the major product channel of the CH(3)CH(2)O + H reaction is CH(3) + CH(2)OH under atmospheric pressure conditions. Only at high pressure and low temperature, the rate constant for CH(3)CH(2)OH formation by collisonal deactivation becomes dominant. For CH(3)CHOH + H, there are three major product channels; at high temperatures, CH(3)+CH(2)OH production predominates at low pressures (P < 100 Torr), while the formation of CH(3)CH(2)OH by collisional deactivation becomes competitive at high pressures and low temperatures (T < 500 K). At high temperatures, the direct hydrogen abstraction reaction producing CH(2)CHOH + H(2) becomes dominant. Rate constants for all accessible product channels in both systems have been predicted and tabulated for modeling applications. The predicted value for CH(3)CHOH + H at 295 K and 1 Torr pressure agrees closely with available experimental data. For practical modeling applications, the rate constants for the thermal unimolecular decomposition of ethanol giving key accessible products have been predicted; those for the two major product channels taking place by dehydration and C-C breaking agree closely with available literature data.     

Modifying the reactivity in the homologation of propane by introducing aryloxide ligands on a silica supported zirconium alkyl system

Grafting the well-defined molecular complexes [(ArO)Zr(CH2tBu)3], , and [(ArO)2Zr(CH2tBu)2], , on SiO2-(700) (ArO=2,6-Ph2C6H3O) gives the corresponding monosiloxy surface complexes [([TRIPLE BOND]SiO)Zr(CH2tBu)2(OAr)] and [([TRIPLE BOND]SiO)Zr(CH2tBu)(OAr)2] as major surface species as evidenced by mass balance analysis, IR and NMR spectroscopies. In both cases, minor cyclometallated species (ca. 20%) are also probably formed during the grafting process. While /SiO2-(700) catalytically transforms propane into its lower and higher homologues, /SiO2-(700) remains inactive. Moreover, the formation of butane as the major higher homologues is consistent with the formation of metallocarbene intermediates in this system in contrast to what was observed for the corresponding homologation reaction on silica supported zirconium hydrides.     

Pyrolysis of n-heptane: experimental and theoretical study

An experimental study of n-heptane pyrolysis (2.0% n-heptane in argon) has been performed at low pressure (400 Pa) within the temperature range from 780 to 1780 K. The pyrolysis products were detected by using synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS). Photoionization mass spectra and photoionization efficiency spectra were measured to identify pyrolysis products, especially radicals and isomers. Mole fraction profiles of pyrolysis products versus temperature were also measured, indicating that H(2), CH(4), C(2)H(2), and C2-C6 alkenes are major pyrolysis products of n-heptane. Meanwhile, the thermal decomposition pathways of n-heptane have been investigated using theoretical calculation. The calculation results are in good agreement with the experimental measurement. On the basis of the experimental observation and theoretical calculation, the pyrolysis channels of unimolecular dissociation are proposed to understand the pyrolysis process of n-heptane.     

Structure and dissociation of ylidyl chlorophosphanes

The ylidyl substituent of the chlorophosphane Ph₃P(DOUBLE BOND)CAr(SINGLE BOND)PRCl exerts a strong influence on the P(SINGLE BOND)Cl bond. An X-ray structure investigation of the representative with Ar(DOUBLE BOND)Ph, R(DOUBLE BOND)Me reveals the longest P(SINGLE BOND)Cl bond ever observed for an acyclic chlorophosphine (226.2(1) pm). It is connected to a conformation that allows an effective negative hyperconjugation. The ylidyl chlorophosphanes with an amino group R are covalent in benzene but become more or less ionic in dichloromethane solution. The solvent-dependent dissociation equilibrium can be followed by ³¹P NMR spectra. In case of an enamine-derived ylidyl chlorophosphane, the equilibrium shifts almost completely from the covalent to the ionic side within a rather narrow range of solvent composition (20 to 70 vol % dichloromethane). © 1996 John Wiley & Sons, Inc.     

CH3CH2+O(3P)反应机理的理论研究

The reaction for CH3CH2+O(3P) was studied by ab initio method. The geometries of the reactants, intermediates, transition states and products were optimized at MP2/6-311+G(d,p) level. The corresponding vibration frequencies were calculated at the same level. The single-point calculations for all the stationary points were carried out at the QCISD(T)/6-311+G(d,p) level using the MP2/6-311+G(d,p) optimized geometries. The results of the theoretical study indicate that the major products are the CH2O＋CH3, CH3CHO+H and CH2CH2+OH in the reaction. For the products CH2O＋CH3 and CH3CHO+H, the major production channels are A1: (R)→IM1→TS3→(A) and B1: (R)→IM1→TS4→(B), respectively. The majority of the products CH2CH2+OH are formed via the direct abstraction channels C1 and C2: (R)→TS1(TS2)→(C). In addition, the results suggest that the barrier heights to form the CO reaction channels are very high, so the CO is not a major product in the reaction.     

Ab initio studies of three-membered ring formation through intramolecular nucleophilic substitution

Three-membered ring (3MR) forming processes of ⁻X(SINGLE BOND)CH₂(SINGLE BOND)CH₂(SINGLE BOND)F and ⁻CH₂(SINGLE BOND)C((SINGLE BOND)Y)(SINGLE BOND)CH₂(SINGLE BOND)F (X(DOUBLE BOND)CH₂, O, or S and Y(DOUBLE BOND)0 or S) through a gas phase neighboring group mechanism (S_Ni) are studied theoretically using the ab initio molecular orbital method with the 6–31+G* basis set. When electron correlation effects are considered, the activation (ΔG^≠) and reaction energies (ΔG⁰) are lowered by ca. 10 kcal mol⁻¹, indicating the importance of the electron correlation effect in these reactions. The contribution of entropy of activation (−TΔS^≠) at 298 K to ΔG^≠ is very small, and the reactions are enthalpy controlled. The ΔG^≠ and ΔG⁰ values for these ring closure processes largely depend on the stabilities of the reactants and the heteroatom acting as a nucleophilic center. The Bell–Evans–Polanyi principle applies well to all these reaction series. © 1997 John Wiley & Sons, Inc. J Comput Chem 18 : 1773–1784, 1997     

Mechanistic and kinetic study of the CH3CO + O2 reaction

Potential-energy surface of the CH3CO + O2 reaction has been calculated by ab initio quantum chemistry methods. The geometries were optimized using the second-order Moller-Plesset theory (MP2) with the 6-311G(d,p) basis set and the coupled-cluster theory with single and double excitations (CCSD) with the correlation consistent polarized valence double zeta (cc-pVDZ) basis set. The relative energies were calculated using the Gaussian-3 second-order Moller-Plesset theory with the CCSD/cc-pVDZ geometries. Multireference self-consistent-field and MP2 methods were also employed using the 6-311G(d,p) and 6-311++G(3df,2p) basis sets. Both addition/elimination and direct abstraction mechanisms have been investigated. It was revealed that acetylperoxy radical [CH3C(O)OO] is the initial adduct and the formation of OH and alpha-lactone [CH2CO2(1A')] is the only energetically accessible decomposition channel. The other channels, e.g., abstraction, HO2 + CH2CO, O + CH3CO2, CO + CH3O2, and CO2 + CH3O, are negligible. Multichannel Rice-Ramsperger-Kassel-Marcus theory and transition state theory (E-resolved) were employed to calculate the overall and individual rate coefficients and the temperature and pressure dependences. Fairly good agreement between theory and experiments has been obtained without any adjustable parameters. It was concluded that at pressures below 3 Torr, OH and CH2CO2(1A') are the major nascent products of the oxidation of acetyl radicals, although CH2CO2(1A') might either undergo unimolecular decomposition to form the final products of CH2O + CO or react with OH and Cl to generate H2O and HCl. The acetylperoxy radicals formed by collisional stabilization are the major products at the elevated pressures. In atmosphere, the yield of acetylperoxy is nearly unity and the contribution of OH is only marginal.     

Theoretical prediction regarding structural and thermodynamical characteristics of stable CH3PO2 isomers and unimolecular decomposition mechanisms of species CH3P(O)2, CH3O?PO,and CH2P(O)OH

The detailed isomerization and dissociation reaction potential energy profile of the CH₃PO₂ system was established at the UCCSD(T)/6‐311++G(3df,2p)//UB3LYP/6‐311++G(d,p) level of theory. Seventy minimum isomers were located and connected by 93 optimized interconversion transition states. Furthermore, 32 isomers with high kinetic stability were predicted to be possible candidates for further experimental detection. The bonding nature of the suggested stable isomers was analyzed while their molecular properties including heats of formation, adiabatic ionization potentials, and adiabatic electronic affinities were calculated at the G2, G2(MP2), G3, and CBS‐Q levels. Based on the isomerization and dissociation potential energy surface, possible unimolecular decomposition mechanisms and pathways of the low‐lying molecules CH₃P(?O)₂, CH₃O? P?O, and CH₂?P(?O)OH were discussed. Furthermore, the transition state theory rate constants of the primary unimolecular dissociation channels were also calculated. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009     

C3H4: Theoretical study of structures and stabilities of isomers

The various isomers including stable structures, carbenes, and diradicals on the C₃H₄ surface have been investigated. The two carbenes propenylidene and cyclopropylidene have been found to have singlet ground states. Vinylmethylene is predicted to have a triplet ground state with a planar diradical type of structure. The syn and anti forms of this state are degenerate. This is in agreement with the observation of two triplet states in the electron spin resonance (ESR ) spectra. The π electrons are found to be delocalized over the three carbons. The singlet diradical structures are found to be more stable than the carbene structures, which retain the CH₂ (DOUBLE BOND) CH allylic structures. The orbital compositions of the frontier orbitals of all systems have been determined to examine the nature of these orbitals. © 1996 John Wiley & Sons, Inc.     

Theoretical studies of decomposition kinetics of CF3CCl2O radical

The unimolecular decomposition reaction of CF₃CCl₂O radical has been investigated using theoretical methods. Two most important channels of decomposition occurring via C–C bond scission and Cl elimination have been considered during the present investigation. Ab initio quantum mechanical calculations are performed to get optimized structure and vibrational frequencies at DFT and MP2 levels of theory. Energetics are further refined by the application of a modified Gaussian-2 method, G2M(CC,MP2). The thermal rate constants for the decomposition reactions involved are evaluated using Canonical Transition State Theory (CTST) utilizing the ab initio data. Rate constants for C–C bond scission and Cl elimination are found to be 6.7 × 10⁶ and 1.1 × 10⁸ s^?1, respectively, at 298 K and 1 atm pressure with an energy barrier of 8.6 and 6.5 kcal/mol, respectively. These values suggest that Cl elimination is the dominant process during the decomposition of the CF₃CCl₂O radical. Transition states are searched on the potential energy surface of the decomposition reactions involved and are characterized by the existence of only one imaginary frequency (NIMAG = 1) during frequency calculation. The existence of transition states on the corresponding potential energy surface is further ascertained by performing intrinsic reaction coordinate (IRC) calculation.     

Synthesis and properties of polycarbosilanes with the meta-linkage bending unit by hydrosilylation polymerization

The polycarbosilanes (PCS) with meta-linkage bending unit ((SINGLE BOND)Me₂Si(SINGLE BOND)m(SINGLE BOND)C₆H₄(SINGLE BOND)Me₂Si(SINGLE BOND)CH₂CH₂(SINGLE BOND)) were successfully synthesized in mild conditions by hydrosilylation in the presence of [Pt{(CH₂(DOUBLE BOND)CHSiMe₂)₂O}₂]. The PCS obtained were soluble in various solvents owing to the lowering of the crystallinity. These properties are well compared with those of the PCS [(SINGLE BOND)Me₂Si(SINGLE BOND)p(SINGLE BOND)C₆H₄(SINGLE BOND)Me₂Si(SINGLE BOND)CH₂CH₂(SINGLE BOND)]_n. © 1996 John Wiley & Sons, Inc.     

Theoretical studies on the unimolecular decomposition of ethylene glycol

The unimolecular decomposition processes of ethylene glycol have been investigated with the QCISD(T) method with geometries optimized at the B3LYP/6-311++G(d,p) level. Among the decomposition channels identified, the H(2)O-elimination channels have the lowest barriers, and the C-C bond dissociation is the lowest-energy dissociation channel among the barrierless reactions (the direct bond cleavage reactions). The temperature and pressure dependent rate constant calculations show that the H(2)O-elimination reactions are predominant at low temperature, whereas at high temperature, the direct C-C bond dissociation reaction is dominant. At 1 atm, in the temperature range 500-2000 K, the calculated rate constant is expressed to be 7.63 × 10(47)T(-10.38) exp(-42262/T) for the channel CH(2)OHCH(2)OH → CH(2)CHOH + H(2)O, and 2.48 × 10(51)T(-11.58) exp(-43593/T) for the channel CH(2)OHCH(2)OH → CH(3)CHO + H(2)O, whereas for the direct bond dissociation reaction CH(2)OHCH(2)OH → CH(2)OH + CH(2)OH the rate constant expression is 1.04 × 10(71)T(-16.16) exp(-52414/T).     

CH_2CH(~2A')自由基与臭氧反应机理的理论研究

用量子化学MP2（full）方法,在6－311+ +G~(**)基组水平上研究了CH_2CH (~2A~＇)自由基与臭氧反应的机理,全参数优化了反应过程中反应物、中间体、过 渡态和产物的几何构型,在QCISD（T,full）/6-311+ +G~(**)水平上计算了它们的 能量,并对它们进行了振动分析,以确定中间体和过渡态的真实性,研究结果表明 ：CH_2CH(~2A~＇)自由基与臭氧反应有两条可行的反应通道,分别为：CH_2CH (~2A~＇)+O_3→TS1→M1→TS2→O_2+OCH_2CH→TS4+O_2→O_2(~3∑_g)+CH_2CHO (~2A~＂)和CH_2CH(~2A~＇)+O_3→M2→TS3→O_2(~3∑_g)+CHO(~2A~＂),后一个反 应通道较容易发生,而且反应活化能小（2.97kJ/mol）,说明CH_2CH(~2A~＇)自由 基与臭氧之间的反应活性很强。