Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.     

Stable porphyrin Zr and Hf metal–organic frameworks featuring 2.5 nm cages: high surface areas,SCSC transformations and catalyses

Two isostructural porphyrin Zr and Hf metal–organic frameworks (FJI-H6 and FJI-H7) are rationally synthesized, and are constructed from 2.5 nm cubic cages. Notably, they both possess high water and chemical stability and can undergo single-crystal to single-crystal transformations to embed Cu²⁺ ions into the open porphyrin rings. FJI-H6 has a high BET surface area of 5033 m² g^–1. Additionally, they exhibit promising catalytic abilities to convert CO₂ and epoxides into cyclic carbonates at ambient conditions.     

Fabrication of Cu-Doped CeO<Subscript>2</Subscript> Catalysts with Different Dimension Pore Structures for CO Catalytic Oxidation

Transition metal oxides (TMOs) applied as catalysts whose catalytic activities are directly affected by their pores size and pores distributions. Herein, two-dimensional Cu-doped CeO₂ (2D@Cu–CeO₂) and three-dimensional Cu-doped CeO₂ (3D@Cu–CeO₂) were prepared by adopting the mesoporous silica SBA-15 and KIT-6 as templates, respectively. Nanometer Cu-doped CeO₂ (nano@Cu–CeO₂) was synthesized by the method of precipitation. All catalysts were evaluated for the catalytic oxidation of CO, and the 3D@Cu–CeO₂ catalyst exhibited the highest catalytic activity (complete conversion temperature T₁₀₀?=?50?°C), which can be ascribed to the three-dimensional porous channel structure, larger specific surface area and abundant active surface oxygen species. In addition, complete conversion of CO had remained the same after 3D@Cu–CeO₂ was observed for 12 h, indicating it has the best catalytic stability for CO.     

Sub-5 nm porous nanocrystals: interfacial site-directed growth on graphene for efficient biocatalysis

The direct production of macromolecular scale (sub-5 nm) porous nanocrystals with high surface area has been a considerable challenge over the past two decades. Here we report an interfacial site-directed capping agent-free growth method to directly produce porous ultrasmall (sub-5 nm), fully crystalline, macromolecular scale nanocrystals. The porous sub-5 nm Prussian blue nanocrystals exhibit uniform sizes (∼4 ± 1 nm), high surface area (∼855 m² g^–1), fast electron transfer (rate constant of ∼9.73 s^–1), and outstanding sustained catalytic activity (more than 450 days). The nanocrystal-based biointerfaces enable unprecedented sub-nanomolar level recognition of hydrogen peroxide (∼0.5 nM limit of detection). This method also paves the way towards the creation of ultrasmall porous nanocrystals for efficient biocatalysis.     

Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

CTAB assisted hydrothermal synthesis, controlled conversion and CO oxidation properties of CeO2 nanoplates, nanotubes, and nanorods

In this work, CeO₂ nanoplates were synthesized by a hydrothermal reaction assisted by hexadecyltrimethylammonium bromide (CTAB) at 100-160 °C. The size of nanoplates was around 40 nm. Further experiment showed that the controlled conversion of nanoplates into nanotubes, and nanorods can be realized by changing the reaction time, temperature, and CTAB/Ce³⁺ ratio value. X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) nitrogen adsorption-desorption measurements were employed to characterize the samples. The CO oxidation properties of nanorods, nanoplates, and nanotubes were investigated. An enhanced catalytic activity has been found for CO oxidation by using CeO₂ nanoplates as compared with CeO₂ nanotubes and nanorods, and the crystal surfaces (100) of CeO₂ nanoplates were considered to play an important role in determining their catalytic oxidation properties.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Site‐Resolved Cu2O Catalysis in the Oxidation of CO

The identification of the contribution of different surface sites to the catalytic activity of a catalyst nanoparticle is one of the most challenging issues in the fundamental studies of heterogeneous catalysis. We herein demonstrate an effective strategy of using a series of uniform cubic Cu₂O nanocrystals with different sizes to identify the intrinsic activity and contributions of face and edge sites in the catalysis of CO oxidation by a combination of reaction kinetics analysis and DFT calculations. Cu₂O nanocrystals undergo in situ surface oxidation forming CuO thin films during CO oxidation. As the average size of the cubic Cu₂O nanocrystals decreases from 1029 nm to 34 nm, the dominant active sites contributing to the catalytic activity switch from face sites to edge sites. These results reveal the interplay between the intrinsic catalytic activity and the density of individual types of surface sites on a catalyst nanoparticle in determining their contributions to the catalytic activity.     

Mechanochemical Activation of Cu–CeO<Subscript>2</Subscript> Mixture as a Promising Technique for the Solid-State Synthesis of Catalysts for the Selective Oxidation of CO in the Presence of H<Subscript>2</Subscript>

A new ecologically clean method for the solid-phase synthesis of oxide copper–ceria catalysts with the use of the mechanochemical activation of a mixture of Cu powder (8 wt %) with CeO₂ was developed. It was established that metallic copper was oxidized by oxygen from CeO₂ in the course of mechanochemical activation. The intensity of a signal due to metallic Cu in the X-ray diffraction analysis spectra decreased with the duration of mechanochemical activation. The Cu¹⁺, Cu²⁺, and Ce³⁺ ions were detected on the sample surface by X-ray photoelectron spectroscopy. The application of temperature-programmed reduction (TPR) made it possible to detect two active oxygen species in the reaction of CO oxidation in the regions of 190 and 210–220°C by a TPR-H₂ method and in the regions of 150 and 180–190°C by a TPR-CO method. It is likely that the former species occurred in the catalytically active nanocomposite surface structures containing Cu–O–Ce bonds, whereas the latter occurred in the finely dispersed particles of CuO on the surface of CeO₂. The maximum conversion of CO (98%, 165°C) reached by the mechanochemical activation of the sample for 60 min was almost the same as conversion on a supported CuO/CeO₂ catalyst.     

Effect of the microstructure of the supported catalysts CuO/TiO<Subscript>2</Subscript> and CuO/(CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>) on their catalytic properties in carbon monoxide oxidation

The effect of the microstructure of titanium dioxide on the structure, thermal stability, and catalytic properties of supported CuO/TiO₂ and CuO/(CeO₂-TiO₂) catalysts in CO oxidation was studied. The formation of a nanocrystalline structure was found in the CuO/TiO₂ catalysts calcined at 500°C. This nanocrystalline structure consisted of aggregated fine anatase particles about 10 nm in size and interblock boundaries between them, in which Cu²⁺ ions were stabilized. Heat treatment of this catalyst at 700°C led to a change in its microstructure with the formation of fine CuO particles 2.5–3 nm in size, which were strongly bound to the surface of TiO₂ (anatase) with a regular well-ordered crystal structure. In the CuO/(CeO₂-TiO₂) catalysts, the nanocrystalline structure of anatase was thermally more stable than in the CuO/TiO₂ catalyst, and it persisted up to 700°C. The study of the catalytic properties of the resulting catalysts showed that the CuO/(CeO₂-TiO₂) catalysts with the nanocrystalline structure of anatase were characterized by the high-est activity in CO oxidation to CO₂.     

γ-Al2O3 supported Pd@CeO2 core@shell nanospheres: salting-out assisted growth and self-assembly,and their catalytic performance in CO oxidation

In this paper, we have successfully demonstrated the clean synthesis of high-quality Pd@CeO₂ core@shell nanospheres with tunable Pd core sizes in water, and furthermore loaded the as-obtained Pd@CeO₂ products on commercial γ-Al₂O₃via electrostatic interaction. KBr here plays two key roles in inducing the growth and self-assembly of Pd@CeO₂ core@shell nanospheres. First, Br^– ions can retard the reduction of Pd²⁺ ions via the formation of the more stable complex of [PdBr₄]^2– so as to tune the size of Pd cores. Second, it greatly decreases the colloidal stability, and hence the surface polarity-weakened Pd and CeO₂ NPs have to spontaneously self-assemble into more stable and ordered structures. Among different-sized Pd samples, the as-obtained 8 nm-Pd@CeO₂/Al₂O₃ one exhibits the best performance in catalytic CO oxidation, which can catalyze 100% CO conversion into CO₂ at 95 °C, which is much lower than the previously reported CeO₂-encapsulated Pd samples.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Mechanistic insights into copper-catalyzed aerobic oxidative coupling of N–N bonds

Catalytic N–N coupling is a valuable transformation for chemical synthesis and energy conversion. Here, mechanistic studies are presented for two related copper-catalyzed oxidative aerobic N–N coupling reactions, one involving the synthesis of a pharmaceutically relevant triazole and the other relevant to the oxidative conversion of ammonia to hydrazine. Analysis of catalytic and stoichiometric N–N coupling reactions support an “oxidase”-type catalytic mechanism with two redox half-reactions: (1) aerobic oxidation of a Cu^I catalyst and (2) Cu^II-promoted N–N coupling. Both reactions feature turnover-limiting oxidation of Cu^I by O₂, and this step is inhibited by the N–H substrate(s). The results highlight the unexpected facility of the N–N coupling step and establish a foundation for development of improved catalysts for these transformations.

Mechanistic studies provide valuable insights into Cu-catalyzed N–N coupling reactions relevant to energy conversion and pharmaceutical synthesis.     

Construction of Cu-Ce interface for boosting toluene oxidation: Study of Cu-Ce interaction and intermediates identified by in situ DRIFTS

A facile hydrothermal method was applied to gain stably and highly efficient CuO-CeO₂ (denoted as Cu1Ce2) catalyst for toluene oxidation. The changes of surface and inter properties on Cu1Ce2 were investigated comparing with pure CeO₂ and pure CuO. The formation of Cu-Ce interface promotes the electron transfer between Cu and Ce through Cu²⁺ + Ce³⁺ ↔ Cu⁺ + Ce⁴⁺ and leads to high redox properties and mobility of oxygen species. Thus, the Cu1Ce2 catalyst makes up the shortcoming of CeO₂ and CuO and achieved high catalytic performance with T₅₀ = 234 °C and T₉₉ = 250 °C (the temperature at which 50% and 90% C₇H₈ conversion is obtained, respectively) for toluene oxidation. Different reaction steps and intermediates for toluene oxidation over Cu1Ce2, CeO₂ and CuO were detected by in situ DRIFTS, the fast benzyl species conversion and preferential transformation of benzoates into carbonates through C=C breaking over Cu1Ce2 should accelerate the reaction.     

Mesoscopic superstructures of flexible porous coordination polymers synthesized via coordination replication

The coordination replication technique is employed for the direct conversion of a macro- and mesoporous Cu(OH)₂–polyacrylamide composite to three-dimensional superstructures consisting of the flexible porous coordination polymers, Cu₂(bdc)₂(MeOH)₂ and Cu₂(bdc)₂(bpy) (bdc^2– = 1,4-benzenedicarboxylate, bpy = 4,4′-bipyridine). Detailed characterization of the replicated systems reveals that the structuralization plays an important role in determining the adsorptive properties of the replicated systems, and that the immobilization of the crystals within a higher-order architecture also affects its structural and dynamic properties. The polyacrylamide polymer is also found to be crucial for maintaining the structuralization of the monolithic systems, and in providing the mechanical robustness required for manual handling. In all, the results discussed here demonstrate a significant expansion in the scope of the coordination replication strategy, and further confirms its utility as a highly versatile platform for the preparation of functional three-dimensional superstructures of porous coordination polymers.     

低于300℃时两种氧化铈材料对稀燃阶段NOx存储性能的影响

研究了低于300 ℃时两种氧化铈对稀燃阶段NO_x存储性能的影响,催化剂由2%（w）Pt/Al₂O₃（PA）与CeO₂-X（X=S,I）机械混合制备. X射线衍射（XRD）,BET表面积和扫描电子显微镜（SEM）用于表征材料的物理结构. X射线光电子能谱（XPS）和H₂程序升温还原（H₂-TPR）用于表面Ce³⁺和活性氧定量. 原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）用于分析表面NO_x吸附物种. 相比于CeO₂-I,CeO₂-S 具有优良的物理化学性能,包括高比表面积、丰富的空隙结构、较高的抗老化能力及表面Ce³⁺浓度. 因而,Pt/Al₂O₃+CeO₂-S 表现出优异的NO_x存储能力. 此外,PA+CeO₂-X（X=S,I）上存在Pt 与CeO₂之间的相互作用,可提高表面氧物种的活性进而促进NO氧化及NO_x存储. PA+CeO₂-S上的这种相互作用要强于PA+CeO₂-I. 研究表明,表面Ce³⁺浓度和活性氧含量对NO_x存储起到重要作用. 然而经过水热处理后,Pt 与老化的氧化铈（ACS,ACI）之间的相互作用降低,并且两种氧化铈NO_x存储性能显著下降. 另外,与PA+ACS（ACI）相比,PA+PACS（PACI）样品NO_x存储能力得到改善,这归因于表面氧物种活性增加能促进硝酸盐的形成.     

CO oxidation over Au/CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> catalists: The effect of the support composition of the au-support interaction

The effect of the support composition on the Au-support interactions and its role in the creation of the activity of Au/CeO₂-ZrO₂ catalysts in CO oxidation has been studied. The CeO₂-ZrO₂ oxides and Au/CeO₂-ZrO₂ catalysts were synthesized, characterized by BET, XRD, HRTEM, AAS, TPR-H₂, and tested in CO oxidation. An approximate evaluation of the H₂ consumption for the surface reduction of the studied samples was estimated applying the model developed by Johnson and Mooi, which is based on the qualitative relationship between the amount of the capping oxygen and BET surface area. The sequence of the increasing percentage of O₂ atoms in the capping peak to the total Ce atoms follows the sequence of the decreasing Zr/Ce molar ratio in the sample. The activity of Au/CeO₂-ZrO₂ catalysts depends on the support composition and increases with the decrease in Zr/Ce molar ratio.     

Enhanced Activity of CuCeO Catalysts for CO Oxidation: Influence of Cu2O and the Dispersion of Cu2O,CuO, and CeO2

CuCeO catalysts prepared by a hydrothermal method with subsequent calcination are tested for the catalytic oxidation of CO. This synthesis method leads to a homogeneous dispersion of Cu₂O, CuO, and CeO₂ in the catalysts. The composition of the catalysts is determined by the molar ratio of the metals, the hydrothermal process, and calcination temperature and influences the catalytic performance. The catalyst containing Cu₂O exhibits high catalytic activity with almost 100 % CO conversion at 105 °C and shows excellent stability with the conversion ratio not decreasing after four months of storage.     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

改性SCR催化剂对Hg0催化氧化性能的研究

采用一系列金属氧化物对商用SCR催化剂进行掺杂改性,筛选出最优Ce掺杂SCR催化剂,模拟实际烟气组分,考察了Ce改性催化剂对烟气中Hg⁰氧化的影响。实验结果表明,Ce掺杂比例适当可显著提高其催化活性,Ce最佳负载量为9%时,Hg⁰的催化氧化效率比未掺杂SCR催化剂提高近40%,BET和XRD也显示,CeO₂在催化剂表面分散程度较好,未出现聚集现象。烟气工况对Hg⁰的催化氧化具有重要影响,其中,烟气组分HCl显著促进了Ce改性催化剂对Hg⁰的氧化,在一定温度范围内,Hg⁰的氧化效率随着温度升高而增加,在最佳空速、温度和烟气组分浓度时,Hg⁰的催化氧化效率可达95.11%。此外,掺杂CeO₂之后SCR催化剂的脱硝性能并未受到影响。