A Cheap and Efficient Methodology for the Solvent‐Free,One‐pot and Multi‐component Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalyzed by Mesoporous NH4H2PO4/MCM‐48 and Comparison of Its Catalytic Efficacy with NH4H2PO4/MCM‐41

The catalytic efficiency of ammonium dihydrogenphosphate was evaluated in the two heterogeneous forms of NH₄H₂PO₄/MCM‐48 and NH₄H₂PO₄/MCM‐41, as mesoporous catalysts, in the solvent free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones through one‐pot three‐component condensation of ethyl acetoacetate, an aryl aldehyde and urea. Different reaction parameters including catalytic efficacy, solvent effect, and urea concentration are considered.     

Macromolecular synthesis using mesoporous zeolites

Mesoporous zeolites such as MCM‐41 were found to serve as nano‐flasks for free radical polymerization of methyl methacrylate (MMA), where the formation of long‐lived propagating radicals was observed. Al‐MCM‐41 with a Lewis‐acidic aluminosilicate framework catalyzed living ring‐opening polymerization of cyclic esters such as δ‐valerolactone and ϵ‐caprolactone, to give narrow molecular‐weight‐distribution polyesters. With Ti‐MCM‐41, a titanate‐containing mesoporous silica, ring‐opening polymerization of δ‐valerolactone also took place to give a high molecular‐weight polyester. On the other hand, with Ti‐MCM‐41 in the presence of methylaluminoxane (MAO), ethylene was polymerized to give a high molecular‐weight, linear polyethylene.     

Conversion of N-Acyl-4-phenyl/benzyl-oxazolidine-2-thiones into Thiol Esters in the Presence of EtSH-K2CO3

N-Acyl-β-hydroxy-4-phenyl-oxazolidinethiones could be rapidly converted into their ethyl thiol esters in high yields by treatment with EtSH at 0 ℃ in CH3CN or 9 ： 1 （V ： V） THF-H2O in the presence of a catalytic amount of K2CO3.     

Synthesis of Fe‐MCM‐41 from silatrane and FeCl3 via sol–gel process and its epoxidation acivity

An iron‐containing mesoporous molecular sieve, or Fe‐MCM‐41, was successfully synthesized the via sol–gel technique using silatrane and FeCl₃ as the silicon and iron sources, and was characterized using various techniques. Many factors were investigated, namely, reaction temperature and time, calcination rate, and iron amount in the reaction mixture. It was found that the optimum conditions in which to synthesize Fe‐MCM‐41 was to carry out the reaction at 60 °C for 7 h using a 1 °C min^?1 calcination rate and a 550 °C calcination temperature. The catalytic activity and selectivity of styrene epoxidation using hydrogen peroxide showed that the selectivity of the styrene oxide reached 65% at a styrene conversion of 22% over the 1%wt catalyst. Copyright © 2008 John Wiley & Sons, Ltd.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Synthesis and Characterization of Ordered Mesoporous Aluminosilicate Molecular Sieves with High Stability in High-Temperature Steam

The ordered mesoporous aluminosilicate molecular sieve （MASMS-1） stable in the high-temperature steam has been successfully synthesized from the assembly of diluted ZSM-5-type precursor with mesoporous MCM-41. The material was characterized by XRD, N2 adsorption-desorption, FE-SEM, TEM, FT-IR spectroscopy and 27A1 MAS NMR techniques. This mesoporous material shows high stability in the high-temperature steam [H2O （φ=20%） in N2 at 800 ℃ for 4 h], which might be ascribed to the synergistic effect of both thick walls containing zeolite-like five-membered ring subunits and highly condensed surface silanol groups.     

Heck and oxidative boron Heck reactions employing Pd(II) supported amphiphilized polyethyleneimine‐functionalized MCM‐41 (MCM‐41@aPEI‐Pd) as an efficient and recyclable nanocatalyst

A novel nanocatalyst was developed based on covalent surface functionalization of MCM‐41 with polyethyleneimine (PEI) using [3‐(2,3‐Epoxypropoxy)propyl] trimethoxysilane (EPO) as a cross‐linker. Amine functional groups on the surface of MCM‐41 were then conjugated with iodododecane to render an amphiphilic property to the catalyst. Palladium (II) was finally immobilized onto the MCM‐41@PEI‐dodecane and the resulted MCM‐41@aPEI‐Pd nanocatalyst was characterized by FT‐IR, TEM, ICP‐AES and XPS. Our designed nanocatalyst with a distinguished core‐shell structure and Pd²⁺ ions as catalytic centers was explored as an efficient and recyclable catalyst for Heck and oxidative boron Heck coupling reactions. In Heck coupling reaction, the catalytic activity of MCM‐41@aPEI‐Pd in the presence of triethylamine as base led to very high yields and selectivity. Meanwhile, the MCM‐41@aPEI‐Pd as the first semi‐heterogeneous palladium catalyst was examined in the C‐4 regioselective arylation of coumarin via the direct C‐H activation and the moderate to excellent yields were obtained toward different functional groups. Leaching test indicated the high stability of palladium on the surface of MCM‐41@aPEI‐Pd as it could be recycled for several runs without significant loss of its catalytic activity.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Studies on the Biginelli Reactions of Salicylaldehyde and 2‐Hydroxy‐l‐naphthaldehyde

The Biginelli reactions of salicylaldehyde and 2‐hydroxy‐l‐naphthaldehyde with ethyl or methyl acetoacetate, ethyl benzoylacetate, and urea have been reinvestigated both in the structures of the reaction products and in the reaction conditions. Salicylaldehyde with ethyl and methyl acetoacetate resulted in oxygen‐bridged tricyclic tetrahydro pyrimidines, whereas with ethyl benzoylacetate afforded the only normal 3,4‐dihydropyrimidin‐2‐one. 2‐Hydroxy‐l‐naphthaldehyde with ethyl and methyl acetoacetate formed the tricyclic compounds. Steric effect is likely to be the principal determinant in governing the formation of product dichotomy. Previous controversial results as to the structure of the Biginelli products have been discussed and settled. The molecular structures of the dihydropyrimidinones and bridged tricyclic products have been fully characterized and confirmed unambiguously by single crystal X‐ray diffraction.     

KHSO_4 as an Efficient Catalytic System for the Regiospecific Nitra-tion of Phenols with Metal Nitrates

Highly regiospecific mononitration of phenol and substituted phenols was accomplished employing a metal nitrate and a catalytic amount of KHSO₄ in acetonitrile. An exclusive ortho‐selectivity was observed with excellent yields. A variety of metal nitrates were used to obtain o‐nitrophenols exclusively in good to excellent yields. The use of KHSO₄ is key for the selectivity observed.     

一种经MCM-41负载双齿膦钯(0)配合物催化的羰基化Suzuki偶联合成二芳酮的新途径

在催化量的MCM-41负载双齿膦钯(0)配合物存在下,芳基碘化物和芳基硼酸、一氧化碳在常压下能顺利进行羰基化Suzuki偶联反应,高产率地生成了各种二芳酮化合物。MCM-41负载双齿膦钯(0)配合物具有比PdCl2(PPh3)2 更高的活性和选择性,且可回收再用10次其活性基本不变,为各种功能化二芳酮的合成提供了方便实用的新途径。     

MCM‐41‐supported mercapto palladium(0) complex: an efficient and recyclable catalyst for the heterogeneous Stille coupling reaction

The Stille cross‐coupling reaction of organostannanes with aryl halides was achieved in the presence of a catalytic amount of MCM‐41‐supported mercapto palladium(0) complex (1 mol%) in DMF? H₂O (9:1) under air atmosphere in good to high yields. This MCM‐41‐supported palladium catalyst can be reused at least 10 times without any decrease in activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Ultrasound assisted eco-friendly synthesis of 3-cinnamoyl coumarins using N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt immobilized on mesoporous Al-SBA-15 as a new and recyclable catalyst

ABSTRACT

A novel mesoporous Al-SBA-15 modified by N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt has been prepared and applied as a reusable catalyst in the 3-cinnamoyl coumarins synthesis via three-component reaction between benzaldehydes, salicylaldehydes and ethyl acetoacetate by the assist of ultrasonic irradiation. By using of the nanocatalyst and also ultrasound irradiation, the easiness and velocity of the abovementioned reaction were enhanced and an environment friendly condition was provided to synthesis of various 3-cinnamoyl coumarin compounds. The properties and structure of nanocatalyst have been specified by methods including powder X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), nitrogen adsorption–desorption analysis and scanning electronic microscopy (SEM). Superiority of this novel and viable method is due to mild reaction condition, short reaction times, high yields of 3-cinnamoyl coumarins, environmentally benign, recoverability of the CoCl₂N,N'-(1,2-phenylene)bis(2-aminobenzamide)/Al-SBA-15 catalyst and reusability with important preservation in its catalytic activity.     

手性Ru复合物催化剂的固载化及其不对称氢转移反应催化应用

Chiral Ru-BsDPEN, (1R,2R)-N-p-benzenesulfonyl-1,2-diphenylethylenediamine, catalyst has been immobilized on a mesoporous molecular sieve of MCM-41 type successfully. A hybrid mesoporous molecular sieve was synthesized using a precursor bearing benzene group, which in organosilica were sulfonylated and reacted with (1R,2R)-l,2-diphenylethylenediamine and [RuC1E(p-cymene)]2 successively to afford immobilized catalyst. The Brunauer-Emmett-Teller (BET) surface area and Barrett-Joyner-Halenda (BJH) pore size decreased after immobilization of catalyst onto the mesoporous material. Enantioselective transfer hydrogenation of ketones catalyzed by immobilized catalyst showed the highest yield of 22.36% and e.e. value of 31.47% by using acetophenone as substrate when reaction time was 48 and 16 h respectively.     

MCM-41中孔分子筛修饰电极对铁(Ⅱ)和钌(Ⅱ)的1,10-氮杂菲配合物的电化学响应

用循环伏安法研究ＭＣＭ－４１分子筛修饰电极对铁（Ⅱ）和钌（Ⅱ）的１，１０－氮杂菲配合物的电化学行为．由于ＭＣＭ－４１中孔分子筛孔表面存在非常活泼的羟基，使其具有很高的活性，它能使分子筛本身作为配体与金属离子配位，并使原来的配体部分解离．     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Synthesis of Some New 1,4‐Dihydropyridine Derivatives through a Facile One‐pot Hantzsch Condensation Catalyzed by Triethylamine

A facile and efficient synthesis of new 1,4‐dihydropyridine derivatives was reported via Hantzsch three‐component condensation reaction of aldehydes or formylphenylboronic acids, ethyl acetoacetate, and ammonium acetate in the presence of a catalytic amount of triethylamine under solvent‐free conditions. The method described here offers several advantages including high yields, short reaction times, and simple work‐up procedure.     

MCM-41固载Co席夫碱配合物的制备及其催化烯烃环氧化的研究

环氧化合物作为有机合成中间体具有广泛应用,催化烯烃环氧化一直是催化化学中的一个重要课题[1～2].尽管已经报道了以过酸、过氧化氢、烷基过氧化物、或分子氧为氧化剂,以金属配合物(通常为钌、钼、钛的配合物)为催化剂的反应体系,但对环氧化物的选择性却很低[3].另外,除了需探索具有高选择性的催化体系外,应用分子氧或空气作为氧化剂更适宜于经济和安全的要求.目前,在以分子氧作为氧化剂,均相催化烯烃环氧化的研究中,应用醛类化合物作为氧转移试剂是一种有效的和方便的促进烯烃环氧化的方法[4].但是,均相催化剂难于分离和重复使用,因此…     

Cationic polymerization of cyclohexyl vinyl ether within MCM‐41 channels

Cationic polymerization of cyclohexyl vinyl ether (CHVE) within mesoporous, siliceous molecular sieves (MCM‐41) yields novel MCM‐41‐polyCHVE host‐guest hybrid materials. Initiation within the channel can be achieved by triphenylmethylium or bis(4‐methoxyphenyl)methylium silanolate ion pairs, as well as by mobile acidic silanols to a certain extent. Generation of the carbenium ions on MCM‐41 is investigated by a special UV/VIS technique. The structure of poly(vinyl ether) generated within the channels of MCM‐41 depends on the mechanism of initiation as shown by means of solid state ¹³C{¹H} and ²⁹Si{¹H} CP MAS NMR spectroscopy.