1,2-双[2-甲基-5-(3,4-二氟苯基)噻吩-3-基]全氟环戊烯的合成

在冰浴条件下, 2-甲基噻吩(1)与液溴反应生成3,5-二溴-2-甲基噻吩(2); 在－78 ℃条件下, 硼酸三丁酯加入2, 得到2-甲基-3-溴-5-硼酸基噻吩(3); 3,4-二氟溴苯与3反应得到2-甲基-3-溴-5-(3,4-二氟苯基)噻吩(4); 在－78 ℃下全氟环戊烯与4反应, 得到一种新的二芳基乙烯类光致变色化合物1,2-双[2-甲基-5-(3,4-二氟苯基)噻吩-3-基]全氟环戊烯(DT-1). 用IR, NMR, MS和元素分析确定了化合物DT-1的结构, 并对该化合物的光致变色特性进行了初步研究.     

Synthesis of 1,2-bis[2-methyl-5(3,4-difluorophenyl)-3-thienyl] perfluorocyclopentene

2-Methylthiophene (1) was treated at 0°C with liquid bromine to form 3,5-dibromo-2-methylthiophene (2) which reacted with tributyl borate to give 2-methyl-3-bromo-5-boronate thiophene (3) at −78°C. Treatment of 3 with 3,4-difluorobrombenzene gave 2-methyl-3-bromo-5-(3,4-difluorophenyl)thiophene (4). Finally, a novel photochromic dithienylethene compound, 1,2-bis [2-methyl-5(3,4-difluorophenyl)-3-thienyl]perfluorocyclopentene (DT-1), was synthesized by the reaction of 4 with perfluorocyclopentene at −78°C. The compound (DT-1) was characterized by IR, NMR, MS, elemental analysis and its photochromic behavior was also discussed. __________ Translated from Chinese Journal of Organic Chemistry, 2007, 27(10): 1282–1284 [译自: 有机化学]     

Novel Bis-arylPheDOT Synthons for Electrochromic Polymers

Two terthiophenes incorporating the synthon 3,4-(1,2-phenylenedioxy)thiophene (PheDOT) have been developed. Specifically, 2,5-bisthienyl-3,4-(1,2-phenylenedioxy)thiophene (BTh-PheDOT 1) and 2,5-bisethylenedioxythienyl-3,4-(1,2-phenylenedioxy)thiophene (BEDOT-PheDOT 2) were electropolymerized to form electroactive polymer films (P1 and P2) that switched between two highly colored states with the more electron-rich EDOT derivative P2 observed to switch at a lower potential. Additionally, both P1 and P2 displayed moderate to low optical bandgaps of 1.8 and 1.6 eV, respectively. Crystal structures of BTh-PheDOT showed the monomer to be nearly planar with π -stacking observable between monomers. These findings demonstrate the potential of PheDOT as an electroactive synthon for the formation of well-ordered systems.     

Synthesis and Properties of Thiophene and Dithiin Functionalized Tetrathiafulvalenes

Abstract

Syntheses of two analogues of tetrathiafulvalene (TTF), fused to 1,4-dithiin and thiophene rings, substituted with thiophene moieties, have been illustrated. The syntheses were accomplished through the reaction of a 1,8-diketone with phosphorus pentasulfide or Lawesson's reagent in boiling dry toluene. Conversion of the thioketones to their the oxo forms with mercury (II) acetate, was followed by self-coupling in freshly distilled boiling triethyl phosphite. Attempts for their electro-polymerizations through the thiophene groups at the peripherals were unsuccessful. Computational chemistry studies revealed that the thiophene groups did not exhibit enough spin densities to perform polymerization.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and Evaluation of Polyfunctionally Substituted Heterocyclic Compounds Derived from 2-Cyano-N-(5-pentadecyl-1,3,4-thiadiazol-2-yl)acetamide

Reaction of 5-pentadecyl-1,3,4-thiadiazol-2-amine 2 with ethyl cyanoacetate gave 2-cyano-N-(5-pentadecyl-1,3,4-thiadiazol-2-yl)acetamide 3, which was used to synthesize different heterocyclic derivatives with coumarin, pyrazole, thiazole, pyridine, pyrimidine, and thiophene rings. Propoxylation of these compounds by using 5 mol of propylene oxide produced nonionic surface active agents. Antimicrobial and surface activities were evaluated.     

C-Phosphorylation of Electron-Rich Heterocycles

Abstract

C-phosphorylation of pyrrole, furan, thiophene derivatives and their benzanalogs by phosphorus tribromide has been studied. Perspective methods for involving trivalent phosphorus residues at a different position of the rings have been developed. Unknown early the heterocycle's derivatives with tri- and tetracoordinated phosphorus substituents (1–5) and novel types of phosphoruscontaining heterocycles (6,7) have been obtained.     

IN-SITU SYNTHESES OF ALKYLLITHIUM COMPOUNDS UNDER ULTRASONIC IRRADIATION

Abstract

The syntheses of organometallics such as alkyllithium compounds are performed. Furan and thiophene derivatives were prepared. Parameters which influence the yield have been optimized. The more important were the physical states of lithium and its sodium content and the nature of the substrate.     

Synthesis,characterizations, and electrochromic properties of donor–acceptor type polymers containing 2, 1, 3‐benzothiadiazole and different thiophene donors

Three donor–acceptor type π‐conjugated monomers containing 2, 1, 3‐benzothiadiazole (Tz) as the acceptor unit and different thiophene derivatives (thiophene, 3,4‐ethylenedioxythiophene, and thieno[3,2‐b]thiophene) as the donor units have been synthesized via Stille coupling reaction. The corresponding polymers are electrochemically deposited onto FTO glass by cyclic voltammetry (CV). The maximum absorption wavelength of the neutral polymers varies with the electron‐rich character of incorporated thiophene moieties, giving rise to tunable colors. In addition, the prepared polymer films demonstrate reasonable transmittance modulation, fast switching rate, high color efficiency and good stability, which meet the requirements of smart windows and electrochromic display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2239–2246     

Structural Design and Applications of Stereoregular Fused Thiophenes and Their Oligomers and Polymers

Abstract

Stereoregular fused thiophenes (SFTs: especially thieno[3,2-b]thiophene (TT) and dithieo[3,2-b:2′,3′-d]thiophene (DTT)), as stable conjugated structures deriving from thiophene ring enlargement, possess outstanding properties and special configuration, such as the superior carrier transfer efficiency and a high degree backbone of planarity. In comparison to stand-alone SFTs structures, oligomers and polymers containing different heteroaromatic units have been much widely researched and used in many fields. In decade, several important reviews have summarized the broad field of fused thiophenes including SFTs, and their synthesis and optoelectronic applications. Here, we critically present the structure–performance relationships and application of oligomers and polymers containing SFTs (exhibiting thiophene ring number from 2 to 7) units. First, the basic structures and properties of SFTs are briefly stated. Then, oligomers classified by extra conjugated heterocyclic attachments are carefully discussed, focusing on the structure–performance relationships for their optoelectronic applications including organic photovoltaic cells and organic field-effect transistors. Moreover, such relationships in polymers have been applied in much wider fields such as organic light-emitting diodes, electrochromic devices, thermoelectric devices, and supercapacitors are discussed. Finally, a summary and prospect are given. Through this review, instruction for molecular design and novel ideas for the future development of SFTs-contained are provided.     

A Convenient One-Pot Synthesis of Some New 3-(2-Phenyl-6-(2-thienyl)-4-pyridyl)hydroquinolin-2-ones Under Microwave Irradiation and Their Antimicrobial Activities

A series of 3-(2-phenyl-6-(2-thienyl)-4-pyridyl)hydroquinolin-2-ones 4a–o were synthesized in high yields by a one–pot cyclocondensation reaction under Kröhnke's reaction conditions using 2-chloro-3-formyl quinoline 1a–c, 2-acetyl thiophene 2, and various N-phenacylpyridinium bromides 3a–e in a mixture of ammonium acetate and acetic acid by microwave irradiation. All the compounds have been characterized by elemental analysis, FT-IR, ¹H NMR, and ¹³C NMR spectral analysis. These compounds have been screened for their antimicrobial activities.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Thiophene-fused DCNQI Derivatives: Their Copper Iodide Complexes as a New Family of Molecular Conductors

Organic sulfur compounds have played important roles in developing new organic materials. Recently we have reported that thiophene-fused DCNQI (DTQl)1 forms a new family of highly conducting CuI complex.¹ However, all our attempts to grow a single crystal suitable for an X-ray analysis have been unsuccessful. The presence of the configurational isomers with respect to the =N-CN orientation was suspected to prevent the growth of a single crystal of 1. Thus we have designed 2 and 3 that bear the substituents at β-position of the condensed thiophene rings; the β-substituents could fix the cyano-group on the opposite side of the substituent. We have also characterized compound 4 for comparison.     

Complex Formation of Cyclodextrins with Various Thiophenes and their Polymerization in Water: Preparation of Poly-pseudo-rotaxanes containing Poly(thiophene)s

Cyclodextrins (α-CD, β-CD and 2,6-di-O-dimethyl-β-CD (DM-β-CD)) were found to form inclusion compounds with thiophenes (thiophene (T), bithiophene (2T)) in water and in crystalline states. The structures of α-CD–T, β-CD–2T, and DM-β-CD–2T inclusion complexes were determined by X-ray crystallography. DM-β-CD forms a 1:1 cage type complex with 2T. In contrast, β-CD formed 2:3 (CD:guest) complexes with thiophene and α-CD formed 2:3 complexes, both of the channel type. These inclusion complexes were found to polymerize by FeCl₃ in the inclusion compounds in water. The products were formed poly-pseudo-rotaxane between cyclodextrins and poly(thiophene) characterized by IR, ¹H-NMR and ¹³C CP/MAS NMR. The molecular weights of the poly-pseudo-rotaxanes with poly(thiophene) were determined by the MALDI-TOF mass spectra to be 3000–5000. In comparison between poly-pseudo-rotaxane (DM-β-CD–poly(thiophene)), authentic poly(thiophene) and the washed DM-β-CD–poly(thiophene) which was washed with DMF to dethread DM-β-CD, these poly-pseudo-rotaxane was characterized by Raman, UV–vis and fluorescence spectra. The maximum emission band of DM-β-CD–poly(thiophene) shifted to a shorter wavelength. The hypsochromic shift was derived from poly-pseudo-rotaxane with DM-β-CD.     

Synthesis,Characterization and Electrochemical Polymerization of Oligomethylthiophenes

Abstract

Regiospecifically methyl substituted α-conjugated thiophene oligomers have been synthesized and their structural and conformational properties investigated by ¹³C NMR, X-ray and force field MMP2 calculations. The use of these molecules as ‘monomers’ for electropolymerization affords poly(3-methylthiophenes) showing spectroelectrochemical properties which depend on the size and the substitution pattern of the starting oligorners.     

Recent synthetic methodologies for pyridopyrazines: An update

Abstract

Among heterocyclic compounds, pyridopyrazines are the scaffolds that have gained considerable attention on academic and industrial level due to their widespread applications as intermediates in the preparation of advanced and biologically potent pharmaceutical materials. Many pyridopyrazine derivatives are available in market to cure various pharmacological disorders. These candidates can be synthesized via a number of synthetic routes using various reagents like cyclocondensation of diaminopyridines with carbonyl compounds or their derivatives etc. In the present review, we have elaborated all these protocols along with different factors and reaction conditions such as use of metal catalyst, solvent-free and microwave irradiation, one-pot synthesis etc. that have resulted in high regioselectivity and yields. The review focuses on the synthetic methodologies developed in the last decade for different pyridopyrazine derivatives.     

HIGH TEMPERATURE REACTIONS OF HYDROGEN SULFIDE AND THIOLS WITH ORGANIC COMPOUNDS

Abstract

The high temperature reaction of hydrogen sulfide with chloro- and bromosubstituted aromatic and heteroaromatic compounds is a convenient method for synthesis of the corresponding thiols and sulfides. The reaction of hydrogen sulfide with ortho-dihalosubstituted aromatic compounds may be directed toward the formation of thianthrene or dibenzo thiophene and their derivatives. The high temperature reaction of thiophenol with chloro- and bromoderivatives of aromatic and heteroaromatic compounds affords the corresponding mixed sulfides. The reaction with ortho-substituted halogen derivatives leads to formation of the sulfur heterocycles of the thianthrene, thioxanthene and dibenzothiophenene series.

The high temperature reaction of hydrogen sulfide with vinyl chloride gives vinylthiol and thiophene. Hydrogen sulfide initiates pyrolytic transformations of thiophene, aniline and benzaldehyde into dithienyls, 5.10-dihydrophenazine and stilbene, respectively. The reaction mechanism has been discussed.     

Efficient Synthesis of Substituted 2‐Amino‐3‐carbethoxythiophenes

A microwave‐assisted method for the synthesis of a variety of thiophene o‐aminoesters (2a–l) has been developed, starting from an appropriate aldehyde, methyl ketone or acetoacetate ester with ethyl cyanoacetate in the presence of elemental sulfur.     

High performance semiconducting polymers containing bis(bithiophenyl dithienothiophene)‐based repeating groups for organic thin film transistors

New dithienothiophene‐containing conjugated polymers, such as poly(2,6‐bis(2‐thiophenyl‐3‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 4 and poly(2,6‐bis (2‐thiophenyl‐4‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 8 have been successfully synthesized via Stille coupling reactions using dodecyl‐substituted thiophene‐based monomers, bistributyltin dithienothiophene, and bistributyltin bithiophene; these polymers have been fully characterized. The main difference between the two polymers is the substitution position of the dodecyl side chains in the repeating group. Grazing‐incidence X‐ray diffraction (GI‐XRD) gave clear evidence of edge‐on orientation of polycrystallites to the substrate. The semiconducting properties of the two polymers have been evaluated in organic thin film transistors (OTFTs). The two conjugated polymers 4 and 8 exhibit fairly high hole carrier mobilities as high as μ_ave = 0.05 cm²/Vs (I_ON/OFF = 3.42 × 10⁴) and μ_ave = 0.01 cm²/Vs, (I_ON/OFF = 1.3 × 10⁵), respectively, after thermal annealing process. The solvent annealed films underwent reorganization of the molecules to induce higher crystallinity. Well‐defined atomic force microscopy (AFM) topography supported a significant improvement in TFT device performance. The hole carrier mobilities of the solvent annealed films are comparable to those obtained for a thermally annealed sample, and were one‐order higher than those obtained with a pristine sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Molecular Assembly by Sequential Ionic Adsorption of Nanocrystalline TiO2 and a Conjugated Polymer

Abstract

Cationic nanocrystalline TiO₂ particles have been synthesized for which the size and composition of the nanoparticles were analyzed by a transmission emission microscopy and energy dispersive x‐ray spectrometer (EDXS). Multilayered films have been fabricated by sequential adsorption of TiO₂ nanoparticles and poly(3‐thiophene acetic acid) (PTAA). Each layer of the nanoparticles and PTAA in the thin film has also been characterized by x‐ray photoelectron spectroscopy, atomic force microscopy, and UV‐visible spectroscopy. These types of multilayered nanocomposite films may find applications in the fabrication of efficient light harvesting photovoltaic cells.     

Synthesis of New Porphyrin-Containing Peptidyl Phosphonates

Synthesis of new, porphyrin-containing peptidyl aminophosphonates is described. The products, derived from 5-(4′-carboxyphenyl)-10,15,20-tri-p-tolylporphyrin and some heterocyclic aminophosphonates were obtained in high yield in the reaction of the 5-(4′-carboxyphenyl)-10,15,20-tritolylporphyrin with selected thiophene and pyridine aminophosphonate diphenyl esters by applying a DCC coupling method used in the peptide synthesis. The obtained porphyrin aminophosphonate products were characterized by spectroscopic methods.     

Photoelectron spectra of planar sulfur heterocycles

The photoelectron spectra of benzo[b]thiophene (2), benzo[c]thiophene (3), thieno[3,2-b] thiophene (4) and thieno[2,3-b]thiophene (5) together with 2,1,3-benzothiadiazol (6) and benzofurazan (7) have been recorded and the first three bands have been assigned to π-orbitals on the basis of band shapes and semiempirical calculations. The good agreement obtained between measured and calculated ionization potentials suggests that sulfur 3d orbital participation must be very small.