Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of erucic acid with 2‐octene

The cross‐metathesis of erucic acid, (CH₃(CH₂)₇CH?CH(CH₂)₁₁COOH), with an excess of 2‐octene in the presence of an electrochemically produced tungsten‐based catalyst has been studied. Cross‐ and self‐hydrocarbon products, viz. 2‐undecene (C₁₁), 6‐dodecene (C₁₂) and 6‐pentadecene (C₁₅), were detected. The influence of several parameters, such as the 2‐octene/erucic acid and 2‐octene/catalyst ratios and the reaction time, on the yield of the cross‐metathesis product, 6‐pentadecene, was studied. The cross‐metathesis of functionalized olefins in the presence of an Al–e^?–WCl₆–CH₂Cl₂ system has not been reported in the literature so far. The cross‐metathesis products in the presence of this catalyst system can be obtained with high yield and high specificity. Copyright © 2004 John Wiley & Sons, Ltd.     

Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 1. Acyclic diene metathesis polymerization of 1,9‐decadiene

The application of the WCl₆–e^?–Al–CH₂Cl₂ system to acyclic diene metathesis polymerization of 1,9‐decadiene is reported. The polyoctenamer formed is of a weight‐average molecular weight of 9000 with a polydispersity of 1.92. IR and NMR spectral analyses indicate the retention of the double bonds in the polymer structure with high trans content as expected from a step condensation reaction. This relatively stable catalytic system, however, also activates the competing vinyl addition reactions while being inactive in ring‐closure metathesis reactions. Copyright © 2002 John Wiley & Sons, Ltd.     

Oxygen‐chelated indenylidene ruthenium catalysts for olefin metathesis

Olefin metathesis is a transition metal‐mediated transformation that rearranges the carbon atoms of the carbon–carbon double bond of olefins. This reaction has become one of the most important and powerful reactions. Therefore development of new, well‐defined, highly active and selective catalysts is very desirable and a valuable goal. This mini‐review mainly introduces the development of ruthenium catalysts in olefin metathesis highlighting oxygen‐chelated indenylidene ruthenium catalysts. Applying an alkoxyl group on the indenylidene ligand fragment can generate the Ru ? O chelating bond. Additionally, various modifications of the ligand as well as the catalytic activity for ring‐closing metathesis reaction and selectivity of cross metathesis reaction are overviewed. Finally, the perspectives on the development of new catalysts are summarized. Copyright © 2015 John Wiley & Sons, Ltd.     

Cross‐metathesis functionalized exo‐olefin derivatives of lactide

Poly(lactic acid) is at the forefront of research into alternative replacements to fossil fuel derived polymers, yet preparation of derivatives of this key biodegradable polymer remain challenging. This article explores the use of two derivatives of lactide, each of which features an exocyclic olefin, and their pre‐polymerization modification by olefin cross‐metathesis. Methylenation of lactide with Tebbe's reagent generates a novel 5‐methylenated lactide monomer, (3S,6S)‐3,6‐dimethyl‐5‐methylene‐1,4‐dioxan‐2‐one, complementing the previously reported 3‐methylenated (6S)‐3‐methylene‐6‐methyl‐1,4‐dioxan‐2,5‐dione. While ring‐opening of each monomer is not productive, olefin cross‐metathesis can be used to functionalize each of the exocyclic olefins to produce a family of monomers. The ring‐opening polymerization of these new monomers, and their hydrogenated congeners, is facilitated by organo‐ and Lewis‐acid catalysts. Together, they offer a new strategy for derivatizing and altering the properties of poly(lactic acid). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 741–748     

Synthesis and Evaluation of Ruthenium 2‐Alkyl‐6‐mercaptophenolate Catalysts for Olefin Metathesis

A series of ruthenium carbene catalysts containing 2‐sulfidophenolate bidentate ligand with an ortho‐substituent next to the oxygen atom were synthesized. The molecular structure of ruthenium carbene complex containing 2‐isopropyl‐6‐sulfidophenolate ligand was confirmed through single crystal X‐ray diffraction. An oxygen atom can be found in the opposite position of the N‐heterocyclic carbene (NHC) based on the steric hindrance and strong trans‐effects of the NHC ligand. The ruthenium carbene catalyst can catalyze ring‐opening metathesis polymerization (ROMP) reaction of norbornene with high activity and Z‐selectivity and cross metathesis (CM) reactions of terminal alkenes with (Z)‐but‐2‐ene‐1,4‐diol to give Z‐olefin products (Z/E ratios, 70:30–89:11) in low yields (13%–38%). When AlCl₃ was added into the CM reactions, yields (51%–88%) were considerably improved and process becomes highly selective for E‐olefin products (E/Z ratios, 79:21–96:4). Similar to other ruthenium carbene catalysts, these new complexes can tolerate different functional groups.     

Some aspects of the synthesis and characterization of special polymers and oligomers by olefin metathesis

Homopolymers of 2-norbornene and 2,3-bis(trifluoromethyl)-2,5-norbornadiene and copolymers of these bicyclic olefins with 1,5-cyclooctadiene and cyclopentene were prepared via ring opening metathesis polymerization. The molecular weight distributions of the polymers were estimated by gel permeation chromatography.The polymers were degraded in a cross metathesis reaction with E-4-octene; only poly[2,3-bis(trifluoromethyl)-2,5-norbornadiene] was not degradable.All reactions were carried out with WCl₆/(CH₃)₄Sn as the catalyst system. The low molecular cyclic oligomers in the polymerization mixtures and the degradation products were analyzed by gas chromatography and identified using a gas chromatography/mass spectrometry coupling.The degradation experiments show reactivity differences for the double bonds situated in the polymer backbone. On the basis of these differences and the fact that this is the first time that a metathesis degradation of such polymers has been reported, the consequences on the ring opening metathesis copolymerization of cycloolefins are discussed in general terms, leading to some new aspects in the planning of the synthesis of special copolymers and oligomers.With reference to a lecture presented at the 4th International Symposium on Olefin Metathesis (ISOM 4), Belfast, 1–4 Sept. 1981.     

Linker‐Free,Silica‐Bound Olefin‐Metathesis Catalysts: Applications in Heterogeneous Catalysis

A set of heterogenized olefin‐metathesis catalysts, which consisted of Ru complexes with the H₂ITap ligand (1,3‐bis(2′,6′‐dimethyl‐4′dimethyl aminophenyl)‐4,5‐dihydroimidazol‐2‐ylidene) that had been adsorbed onto a silica support, has been prepared. These complexes showed strong binding to the solid support without the need for tethering groups on the complex or functionalized silica. The catalysts were tested in the ring‐opening–ring‐closing‐metathesis (RO‐RCM) of cyclooctene (COE) and the self‐metathesis of methyl oleate under continuous‐flow conditions. The best complexes showed a TON>4000, which surpasses the previously reported materials that were either based on the Grubbs–Hoveyda II complex on silica or on the classical heterogeneous Re₂O₇/B₂O₃ catalyst.     

The first example of tungsten-based carbene generation from WCl6 and atomic carbon and its use in olefin metathesis

We describe a new route for the synthesis of tungsten-based carbenes generated by the reaction of WCl₆ with atomic carbon in a carbon arc reactor. The active species formed under these conditions, [W] = CCl₂, was found to catalyze olefin metathesis reactions of 1-octene, 2-octene and 1-heptene. We also evaluated the mechanism of formation of [W] = CCl₂ within the WCl₆/C system at the DFT level.     

FeCl3‐Catalyzed Ring‐Closing Carbonyl–Olefin Metathesis

Exploiting catalytic carbonyl–olefin metathesis is an ongoing challenge in organic synthesis. Reported herein is an FeCl₃‐catalyzed ring‐closing carbonyl–olefin metathesis. The protocol allows access to a range of carbo‐/heterocyclic alkenes with good efficiency and excellent trans diastereoselectivity. The methodology presents one of the rare examples of catalytic ring‐closing carbonyl–olefin metathesis. This process is proposed to take place by FeCl₃‐catalyzed oxetane formation followed by retro‐ring‐opening to deliver metathesis products.     

Ring‐opening metathesis polymerization of cyclododecene using an electrochemically reduced tungsten‐based catalyst

The ring‐opening metathesis polymerization of cyclododecene using an electrochemically reduced tungsten‐based catalyst (WCl₆? e^?? Al? CH₂Cl₂) is described. In addition, the influence of reaction conditions on the polymerization yield was determined. The resulting polymer has been characterized by NMR, IR, gel permeation chromatography and differential scanning calorimetry. The glass transition temperature and melting point of the polydodecenamer are 19.6°C and 70.0°C respectively. Furthermore, cyclododecene has been polymerized into a low‐molecular‐weight polymer (12.0 × 10³) with a polydispersity of 2.06 in high yields (94%). IR and NMR analysis indicate that the polydodecenamer has a high trans content (60%). Copyright © 2004 John Wiley & Sons, Ltd.     

Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 2. Ring‐opening metathesis polymerization of norbornene

The present work reports the application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to the ring‐opening metathesis polymerization of norbornene. Analysis of the polynorbornene microstructure by means of ¹H and ¹³C NMR spectroscopy indicates that the polymer contains a mainly cis stereoconfiguration of the double bonds (σ_c = 0.61) and a blocky distribution (r_tr_c > 1) of cis and trans double bonds (r_tr_c = 3.37). This catalytic system is reluctant to facilitate the competing addition reactions of cycloalkenes while proceeding with the polymerization reactions with good conversions and at short periods. Copyright © 2004 John Wiley & Sons, Ltd.     

Etudes sur le mecanisme de la metathese des olefines : IV. Echanges d'hydrure et carbenes

The possibility of exchanging hydrogen atoms between the catalyst and the substrate in olefin metathesis was examined. Exchange was observed at a high catalyst/olefin ratio, although virtually no exchange was observed at low ratio, Alkylidenetungsten, formed from WCl₆ and dimetallic derivatives of methane (i.e. CH₂M₂), proved to be efficient catalysts for olefin metathesis. It was concluded from these experiments and from those described earlier that olefin metathesis takes place by addition of an alkylidenetungsten to an olefin followed by fission of the resulting cyclobutane. A solution was proposed to the question raised by the Chauvin mechanism, namely the initiation, which was linked to the formation of alkyltungsten by addition of alkyl- or hydrido-tungten to olefins, followed by appropriate transformation to alkylidenetungsten compounds.     

Direct evidence of crosslinks by metathesis degradation

The degradation of unsaturated polymers by olefin metathesis has already been applied to the investigation of crosslink structures. In the present paper, crosslinks in poly(butadiene-alt-propene), obtained by partial bromination with N-bromosuccinimide and reaction with 1,4-bis(bromomagnesium)butane, were investigated by this method. Metathesis degradation was carried out with (E)-4-octene using the catalyst WCl₆-Sn(CH₃)₄. The low-molecular-weight products were identified by combination of gas chromatography (GC) and mass spectrometry (MS).     

A New Route to Vitamin E Key‐Intermediates by Olefin Cross‐Metathesis

Ru‐Catalyzed olefin cross‐metathesis (CM) has been successfully applied to the synthesis of several phytyl derivatives ( 2b, 2d – f, 3b ) with a trisubstituted C?C bond, as useful intermediates for an alternative route to α‐tocopheryl acetate (vitamin E acetate; 1b ) (Scheme 1). Using the second‐generation Grubbs catalyst RuCl₂(C₂₁H₂₆N₂)(CHPh)PCy₃ (Cy = cyclohexyl; 4a ) and Hoveyda–Grubbs catalyst RuCl₂(C₂₁H₂₆N₂){CH‐C₆H₄(O‐ⁱPr)‐2} ( 4b ), the reactions were performed with various C‐allyl ( 5a – f, 7a,b ) and O‐allyl ( 8a – d ) derivatives of trimethylhydroquinone‐1‐acetate as substrates. 2,6,10,14‐Tetramethylpentadec‐1‐ene ( 6a ) and derivatives 6c – e of phytol ( 6b ) as well as phytal ( 6f ) were employed as olefin partners for the CM reactions (Schemes 2 and 5). The vitamin E precursors could be prepared in up to 83% isolated yield as (E/Z)‐mixtures.     

A general model for selectivity in olefin cross metathesis

In recent years, olefin cross metathesis (CM) has emerged as a powerful and convenient synthetic technique in organic chemistry; however, as a general synthetic method, CM has been limited by the lack of predictability in product selectivity and stereoselectivity. Investigations into olefin cross metathesis with several classes of olefins, including substituted and functionalized styrenes, secondary allylic alcohols, tertiary allylic alcohols, and olefins with alpha-quaternary centers, have led to a general model useful for the prediction of product selectivity and stereoselectivity in cross metathesis. As a general ranking of olefin reactivity in CM, olefins can be categorized by their relative abilities to undergo homodimerization via cross metathesis and the susceptibility of their homodimers toward secondary metathesis reactions. When an olefin of high reactivity is reacted with an olefin of lower reactivity (sterically bulky, electron-deficient, etc.), selective cross metathesis can be achieved using feedstock stoichiometries as low as 1:1. By employing a metathesis catalyst with the appropriate activity, selective cross metathesis reactions can be achieved with a wide variety of electron-rich, electron-deficient, and sterically bulky olefins. Application of this model has allowed for the prediction and development of selective cross metathesis reactions, culminating in unprecedented three-component intermolecular cross metathesis reactions.     

Unprecedented Selectivity of Ruthenium Iodide Benzylidenes in Olefin Metathesis Reactions

The development of selective olefin metathesis catalysts is crucial to achieving new synthetic pathways. Herein, we show that cis‐diiodo/sulfur‐chelated ruthenium benzylidenes do not react with strained cycloalkenes and internal olefins, but can effectively catalyze metathesis reactions of terminal dienes. Surprisingly, internal olefins may partake in olefin metathesis reactions once the ruthenium methylidene intermediate has been generated. This unexpected behavior allows the facile formation of strained cis‐cyclooctene by the RCM reaction of 1,9‐undecadiene. Moreover, cis‐1,4‐polybutadiene may be transformed into small cyclic molecules, including its smallest precursor, 1,5‐cyclooctadiene, by the use of this novel sequence. Norbornenes, including the reactive dicyclopentadiene (DCPD), remain unscathed even in the presence of terminal olefin substrates as they are too bulky to approach the diiodo ruthenium methylidene. The experimental results are accompanied by thorough DFT calculations.     

Electrochemically reduced tungsten‐based active species as catalysts for metathesis‐related reactions: ring‐opening metathesis copolymerization of cyclopentene with cyclooctene

The ring‐opened metathesis copolymerization of cyclopentene with cyclooctene by an electrochemically generated WCl₆‐based catalyst has been prepared and ¹³C NMR spectroscopy used to analyse in detail the nature of the homo‐ and hetero‐dyad units. This copolymer was characterized by gel‐permeation chromatography (M_n = 12 900, PDI= 2.2) and differential scanning calorimetry analysis. The glass‐transition temperature T_g of the copolymer was ?18.7 °C. Homopolymerization of cyclopentene is also reported to compare with copolymers produced in this work. Copyright © 2005 John Wiley & Sons, Ltd.     

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl6

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl₆ was studied. The metathesis is preceded by isomerization of hex-1-ene to hex-2-ene, from which the main reaction product, viz., oct-4-ene, is derived. The WCl₆-1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF₄) system efficiently catalyzes metathesis of linear olefin, the ionic liquid serving as the reaction medium by forming a stable homogeneous catalytic system with WCl₆. The yields of the metathesis products increase with increasing reaction temperature. The addition of tin-containing promoters leads to a substantial increase in the reaction rate. In the WCl₆-BMIM·BF₄-SnBu₄ system, the selectivity of the formation of oct-4-ene is significantly enhanced.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2094–2097, October, 2004.     

Ring‐Closing Metathesis Reactions: Interpretation of Conversion–Time Data

Conversion–time data were recorded for various ring‐closing metathesis (RCM) reactions that lead to five‐ or six‐membered cyclic olefins by using different precatalysts of the Hoveyda type. Slowly activated precatalysts were found to produce more RCM product than rapidly activated complexes, but this comes at the price of slower product formation. A kinetic model for the analysis of the conversion–time data was derived, which is based on the conversion of the precatalyst (Pcat) into the active species (Acat), with the rate constant k_act, followed by two parallel reactions: 1) the catalytic reaction, which utilizes Acat to convert reactants into products, with the rate k_cat, and 2) the conversion of Acat into the inactive species (Dcat), with the rate k_dec. The calculations employ two experimental parameters: the concentration of the substrate (c(S)) at a given time and the rate of substrate conversion (?dc(S)/dt). This provides a direct measure of the concentration of Acat and enables the calculation of the pseudo‐first‐order rate constants k_act, k_cat, and k_dec and of k_S (for the RCM conversion of the respective substrate by Acat). Most of the RCM reactions studied with different precatalysts are characterized by fast k_cat rates and by the k_dec value being greater than the k_act value, which leads to quasistationarity for Acat. The active species formed during the activation step was shown to be the same, regardless of the nature of different Pcats. The decomposition of Acat occurs along two parallel pathways, a unimolecular (or pseudo‐first‐order) reaction and a bimolecular reaction involving two ruthenium complexes. Electron‐deficient precatalysts display higher rates of catalyst deactivation than their electron‐rich relatives. Slowly initiating Pcats act as a reservoir, by generating small stationary concentrations of Acat. Based on this, it can be understood why the use of different precatalysts results in different substrate conversions in olefin metathesis reactions.     

Reversible aqueous metathesis reactions for potential application in dynamic combinatorial chemistry

Solutions of heterocycles having an allyl sulfide unit and simple alkenes in 50% t-BuOH/H₂O undergo reversible olefin metathesis reactions with the second generation Hoveyda-Grubbs catalyst. The choice of functional groups is limited by competitive chelation of some heterocycles with the catalyst, and other stereoelectronic effects.