Styrene-assisted melt free radical grafting of glycidyl methacrylate onto polypropylene

The free radical grafting reactivity of glycidyl methacrylate (GMA) onto polypropylene (PP) in the molten state is low. This article shows that adding styrene as a second monomer (or comonomer) increases both the rate and yield of GMA grafting and reduces PP chain scission. The proposed mechanism is that when St is added to the PP/GMA/peroxide grafting system, St reacts first with PP macroradicals to form stable styryl macroradicals. These latter then react (or copolymerize) with GMA to form GMA grafted PP. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1053–1063, 1998     

Cellulose Functionalization via ATRP Grafting of Glycidyl Methacrylate for Cr（VI） Adsorption

Cellulose was first grafted with glycidyl methacrylate （GMA） in an ionic liquid via atom transfer radical polymerization （ATRP） and then the introduced epoxy groups were reacted with ethanediamine （EDA） to obtain an amino adsorbent. The grafting copolymer and the obtained adsorbent were characterized by FTIR, aH NMR, TEM and SEM. The results showed that the grafted copolymers had grafted polymer chains with well-controlled molecu- lar weight and polydispersity, the polymerization was a controlled system. The cellulose adsorbent had numerous micropores on the surface and showed high performance for Cr（VI） adsorption. The adsorption behavior was pH dependent and the sorption equilibrium was achieved within 2 h on the adsorbent.     

Styrene-assisted free radical grafting of glycidyl methacrylate onto polyethylene in the melt

Glycidyl methacrylate (GMA) is a very useful monomer as it bears an epoxy group which is capable of reacting with various other functional groups. However, its melt free radical grafting reactivity onto a polymer backbone is low. In this study, we show that the use of styrene (St) as a comonomer greatly promotes both GMA's grafting yield and grafting rate onto polyethylene (PE). It is proposed that, in the presence of St, the dominant mechanism of the free radical grafting of GMA onto PE is that St reacts first with PE secondary macroradicals and the resulting styryl macroradicals then copolymerize with GMA leading to grafted GMA. We also show that the contribution of St is not related to an improved solubility of GMA in the molten PE. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2763–2774, 1998     

利用反向原子转移自由基聚合反应合成聚甲基丙烯酸缩水甘油酯

以偶氮二异丁腈为引发剂,CuBr2/bpy为催化体系,甲基丙烯酸缩水甘油酯(GMA)通过反向原子转移自由基聚合反应合成了聚甲基丙烯酸缩水甘油酯(PGMA),其结构经1H NMR,IR和GPC确证。聚合反应符合活性自由基聚合特征,在聚合过程中GMA转化率和PGMA分子量随反应时间的延长而增大,分子量分布较窄。     

Thermal and optical properties of silver-poly(methylmethacrylate) nanocomposites prepared by in-situ radical polymerization

Surface modified silver nanoparticles dispersed in chloroform were encapsulated in poly(methylmethacrylate) (PMMA) by in-situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The particle size distribution of colloidal silver nanoparticles was determined using transmission electron microscopy. The obtained transparent nanocomposite films were characterized using UV-vis spectroscopy, ¹H NMR spectroscopy and gel permeation chromatography. Effective medium Maxwell-Garnett theory was used in order to explain optical properties of nanocomposite films taking into account inhomogeneous spatial distribution of silver nanoparticles in PMMA matrix. The influence of the silver nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. Thermo-oxidative stability of the PMMA in the presence of low content of inorganic phase is significantly improved. The glass transition temperatures of nanocomposites are slightly lower compared to the pure polymer.     

Reactive compatibilization of blends of PET and PP modified by GMA grafting

The melt radical grafting of glycidyl methacrylate (GMA) onto isotactic polypropylene (PP) was carried out in Brabender internal mixer and the influence of reaction procedure, radical initiator concentration and addition of co-monomer (styrene) on the grafting efficiency was examined. The viscosity, the thermal behaviour and melt rheology of PP-g-GMA samples was then analysed as a function of grafted GMA content. Blends of poly(ethylene terephthalate) (PET) with PP and PP-g-GMA (5.2 wt% GMA), prepared in internal mixer, were characterised by SEM, DSC and melt viscosimetry. The morphological analysis of PET/PP-g-GMA blends (80/20, 50/50 w/w) pointed out a marked improvement of phase dispersion (with particle size of about 0.6 μm for 80/20 blend) and interfacial adhesion, as compared to non-compatibilized PET/PP blend. The results of mixing torque and thermal analysis supported the occurrence of in-situ compatibilization reaction between epoxy groups of GMA modified PP and carboxyl end-groups of PET in the melt.     

酶促缩聚和原子转移自由基聚合法合成AB型两亲性嵌段共聚物

Novozyme-435催化10-羟基癸酸进行自缩聚反应得到线性聚酯, 端基分别是羟基(—OH)和羧基(—COOH), 在三乙胺催化下, 分别用α-溴代丙酰溴和三甲基氯硅烷(TMSCL)进行端基官能化生成一个单官能度的大分子引发剂, 在CuCl/2,2'-联吡啶(bpy)催化体系中, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基反应(ATRP), 得到聚(10-羟基癸酸酯)/聚甲基丙烯酸环氧丙酯(PHDA-b-PGMA) AB 型两亲性嵌段共聚物, 其结构及分子量(分布)通过核磁共振和凝胶渗透色谱(GPC)确证. 此AB型两亲性嵌段共聚物在水溶液中能自组装形成纳米粒子, 用原子力显微镜(AFM)观察粒子的形状和大小.     

Synthesis and characterization of syndiotactic polystyrene-graft-poly(glycidyl methacrylate) copolymer by atom transfer radical polymerization

Syndiotactic polystyrene-graft-poly(glycidyl methacrylate) (sPS-graft-PGMA) copolymer was synthesized by a heterogenous atom transfer radical polymerization (ATRP) using 2-bromo-2-methylpropanoyl bromide modified syndiotactic polystyrene (BMPsPS) as macroinitiator and copper bromide combined with 2,2′-bipyridine as catalyst in anisole at room temperature. The macroinitiator with 7.0 mol% bromine content was prepared from Friedel-Crafts acylation reaction of sPS with 2-bromo-2-methylpropanoyl bromide in a heterogeneous process. It was found that BMsPS macroinitiator was well swelled in the mixture of anisole and GMA, the equilibrium swelling degree could reach 370%. The resultant polymer was characterized by FTIR and NMR spectroscopies. In addition, the thermal properties of the graft copolymers were also investigated with differential scanning calorimetry (DSC).     

Reactive compatibilization of polyolefin/PET blends by melt grafting with glycidyl methacrylate

The melt free radical grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene (HDPE) was carried out in Brabender internal mixer. The GMA content of the grafted HDPE (HDPE‐g‐GMA) was determined through FTIR by means of a calibration curve. The influence of reaction procedure, radical initiator concentration and addition of a co‐monomer (styrene) on the grafting efficiency was examined. Blends of poly(ethylene terephthalate) (PET) with HDPE and HDPE‐g‐GMA (75/25 w/w) were prepared by melt mixing in internal mixer. The morphology of the blends was then analysed by SEM microscopy. PET/HDPE‐g‐GMA blends displayed improved phase dispersion and interfacial adhesion as compared to unfanctionalized PET/HDPE blend.     

Reactive processing of polymers: Structural characterisation of products by H and C NMR spectroscopy for glycidyl methacrylate grafting onto EPR in the absence and presence of a reactive comonomer

Grafted GMA on EPR samples were prepared in a Thermo-Haake internal mixer by free radical melt grafting reactions in the absence (conventional system; EPR-g-GMA_CONV) and presence of the reactive comonomer divinyl benzene, DVB (EPR-g-GMA_DVB). The GMA-homopolymer (poly-GMA), a major side reaction product in the conventional system, was almost completely absent in the DVB-containing system, the latter also resulted in a much higher level of GMA grafting. A comprehensive microstructure analysis of the formed poly-GMA was performed based on one-dimensional ¹H and ¹³C NMR spectroscopy and the complete spectral assignments were supported by two-dimensional NMR techniques based on long range two and three bond order carbon-proton couplings from HMBC (Heteronuclear Multiple Bond Coherence) and that of one bond carbon-proton couplings from HSQC (Heteronuclear Single Quantum Coherence), as well as the use of Distortionless Enhancement by Polarization Transfer (DEPT) NMR spectroscopy. The unambiguous analysis of the stereochemical configuration of poly-GMA was further used to help understand the microstructures of the GMA-grafts obtained in the two different free radical melt grafting reactions, the conventional and comonomer-containing systems. In the grafted GMA, in the conventional system (EPR-g-GMA_CONV), the methylene protons of the GMA were found to be sensitive to tetrad configurational sequences and the results showed that 56% of the GMA sequence in the graft is in atactic configuration and 42% is in syndiotactic configuration whereas the poly-GMA was predominantly syndiotactic. The differences in the microstructures of the graft in the conventional EPR-g-GMA_CONV and the DVB-containing (EPR-g-GMA_DVB) systems is also reported     

Some Studies on the Plasma-Initiated Polymerization of Methyl Methacrylate in the Liquid State

Previous results obtained for the free radical polymerization of methyl methacrylate were used to predict the mechanism of plasmainitiated polymerization of this monomer in the liquid state. The data obtained by use of high resolution NMR spectra strongly predict a free radical mechanism for the plasma-initiated polymerization of methyl methacrylate.     

Surface grafting of glycidyl methacrylate on silica gel and polyethylene beads

Surface grafting of glycidyl methacrylate (GMA) on silica gel and a polyethylene bead was performed by radical polymerization and radiation-induced polymerization, respectively, in order to improve softness. Subsequently, diethylene triamine (DETA), triethylene tetraamine (TETA), and iminodiacetic acid (IDA) were introduced to the grafted GMA for use as affinity columns. The efficiency of the affinity column was investigated by use of bovine serum albumin (BSA) and hemoglobin (Hb) as model proteins. The affinity degree of BSA was higher than Hb for the DETA and TETA column, whereas the affinity degree of Hb was higher than BSA for the IDA column supported by silica gel. The affinity degree of BSA was higher than Hb for the DETA and TTA column supported by polyethylene (PE) beads.     

Emulsion grafting of glycidyl methacrylate onto polyethylene fiber

Graft polymerization of glycidyl methacrylate (GMA) onto polyethylene fiber was carried out in emulsion solution obtained by dissolving GMA in water with sodium n-dodecyl sulfate (SDS) as a surfactant. GMA micelles diameter was 415 nm at 5% GMA with 4% SDS and increased up to 1840 nm at 10% GMA with 12% SDS. Degree of grafting (Dg) which was estimated by the weight gain after grafting increased with the increment of GMA concentration in the range 2 to 8% and slightly reduced at 10% GMA. The increment in SDS concentration from 4% to 16% at 5% GMA reduced Dg from 120% to 18%. In emulsion graft polymerization, Dg was affected by covered area by GMA/SDS micelles on the fiber.     

Single-step synthesis of proton conducting poly(vinylidene fluoride) (PVDF) graft copolymer electrolytes

The single-step synthesis of proton conducting poly(vinylidene fluoride) (PVDF) graft copolymer electrolytes is demonstrated. The graft copolymers of PVDF backbone with poly(sulfopropyl methacrylate) (PVDF-g-PSPMA) and poly(styrene sulfonic acid) (PVDF-g-PSSA) were synthesized using PVDF as a macroinitiator for atom transfer radical polymerization (ATRP). ¹H NMR and FT-IR spectroscopy show that the “grafting from” method using ATRP was successful and the maximum grafting degrees were 35 and 25 wt% for PVDF-g-PSPMA and PVDF-g-PSSA, respectively. The IEC values were 0.63 and 0.45 meq/g, the water uptakes were 46.8 and 33.4 wt% and the proton conductivities were 0.015 and 0.007 S/cm at room temperature, for PVDF-g-PSPMA and PVDF-g-PSSA, respectively. Both membranes exhibited excellent thermal stability up to around 350 °C, verified by thermal gravimetric analysis (TGA).     

Mechanistic study of enzyme catalyzed polymerization of 8-hydroxyquinoline-5-sulfonate using nuclear magnetic resonance spectroscopy

Horseradish peroxidase catalyzed polymerization of 8-hydroxyquinoline-5-sulfonate (HQS) has been studied by in-situ NMR spectroscopy. The 2, 4 and 7 positions of the HQS are involved in oxidative free radical coupling with other HQS molecules with the order of reactivity being 7 ≥ 2 > 4. A mechanism for the oxidative free radical coupling and structure of the resulting polymer is proposed, which is supported by ¹³C NMR spectroscopy.     

Atom transfer radical copolymerization of glycidyl methacrylate and allyl methacrylate, two functional monomers

Bi-functional statistical copolymers, based on allyl methacrylate (AMA) and glycidyl methacrylate (GMA), were synthesized via atom transfer radical polymerization (ATRP). The polymerization reactions were carried out in a diphenyl ether solution at low temperature, 50 °C, using ethyl 2-bromoisobutyrate (EBrIB) as an initiator, and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst. Different aspects of the copolymerization, such as the kinetic behaviour, crosslink density and gel fraction were studied. The sol fractions of the synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. The reactivity ratios were calculated from the copolymer composition, determined by ¹H NMR, and using the extended Kelen-Tüdös method. Values of 0.82 ± 0.04 and 1.22 ± 0.03 were obtained for AMA and GMA, respectively. The copolymer composition as a function of conversion degree for the different monomer molar fractions in the feed agreed with the theoretical values calculated from the Mayo-Lewis terminal model (MLTM).     

Living radical graft polymerization of methyl methacrylate to polyethylene film with typical and reverse atom transfer radical polymerization

Nickel‐mediated atom transfer radical polymerization (ATRP) and iron‐mediated reverse ATRP were applied to the living radical graft polymerization of methyl methacrylate onto solid high‐density polyethylene (HDPE) films modified with 2,2,2‐tribromoethanol and benzophenone, respectively. The number‐average molecular weight (M_n) of the free poly(methyl methacrylate) (PMMA) produced simultaneously during grafting grew with the monomer conversion. The weight‐average molecular weight/number‐average molecular weight ratio (M_w/M_n) was small (<1.4), indicating a controlled polymerization. The grafting ratio showed a linear relation with M_n of the free PMMA for both reaction systems. With the same characteristics assumed for both free and graft PMMA, the grafting was controlled, and the increase in grafting ratio was ascribed to the growing chain length of the graft PMMA. In fact, M_n and M_w/M_n of the grafted PMMA chains cleaved from the polyethylene substrate were only slightly larger than those of the free PMMA chains, and this was confirmed in the system of nickel‐mediated ATRP. An appropriate period of UV preirradiation controlled the amount of initiation groups introduced to the HDPE film modified with benzophenone. The grafting ratio increased linearly with the preirradiation time. The graft polymerizations for both reaction systems proceeded in a controlled fashion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3350–3359, 2002     

Synthesis of well‐defined glycidyl methacrylate based block copolymers with self‐activation and self‐initiation behaviors via ambient temperature atom transfer radical polymerization

Well‐defined glycidyl methacrylate (GMA) based di‐ and triblock copolymers, with self‐activation and self‐initiation behaviors by incorporation of 2‐(diethylamino) ethyl methacrylate (DEA) blocks, were synthesized via ambient temperature atom transfer radical polymerization (ATRP). The stability of the GMA pendant oxirane rings in tertiary amine environments at ambient temperature was investigated. More importantly, both self‐activation behavior in oxirane ring opening addition reaction and self‐initiation behavior in post‐cure oxirane ring opening crosslinking of these block copolymers were evidenced by ¹H NMR studies. The results demonstrated that the reactivity of pendent oxirane rings was strongly dependant on the nucleophilicity and steric hindrance of tertiary amine moieties and temperature. This facilitated the synthesis of well‐defined block copolymers of GMA and DEA via sequential monomer addition ATRP, particularly for polymerization of GMA monomer at ambient temperature. Moreover, these one‐component GMA based block polymers have novel self‐activation and self‐initiation properties, rendering some potential applications in both enzyme immobilization and GMA‐based thermosetting materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2947–2958, 2007     

高容量亚胺基二乙酸型螯合树脂的制备及吸附性能

以甲基丙烯酸缩水甘油酯(GMA)为单体, 氯甲基化的交联聚苯乙烯树脂(CMCPS)为大分子引发剂, CuBr/2,2'-联吡啶(Bpy)为催化剂, 采用表面引发原子转移自由基聚合(SI-ATRP)技术, 使甲基丙烯酸缩水甘油酯聚合在CMCPS树脂表面, 制得了环氧化聚合物. 将该聚合物与亚胺基二乙酸(IDA)反应, 制备了高容量亚胺基二乙酸型螯合树脂(IDA-PGMA-CMCPS), 用元素分析对其进行了表征. 考察了螯合树脂对Cu²⁺的吸附性能及动力学和热力学参数. 该螯合树脂表面IDA接枝密度达8.15 mg/m². 研究结果表明, 树脂对Cu²⁺的吸附量随离子浓度和温度的升高而增加, 当pH值为2.2时, 对Cu²⁺离子的吸附效果最佳. 树脂的静态饱和吸附容量为1339.66 mg/g, Langmuir和Freundlich方程均呈现良好的拟合度. 通过热力学平衡方程计算ΔG<0, ΔH=270.60 kJ/mol, ΔS>0, 表明该吸附过程是自发、 吸热、 熵增加的过程. 动力学研究结果表明, 准二级动力学方程能较好拟合动力学实验结果, 该过程符合准二级动力学模型.     

聚乙烯表面接枝聚合改性及抗凝血性的研究

聚乙烯(PE)膜经Ar等离子体预处理,无光引发剂紫外光照接枝甲基丙烯酸缩水甘油酯(GMA),然后进行肝素化处理,以改善PE的抗凝血性能。用正交实验确定接枝反应的最优条件。通过X-射线光电子能谱(XPS)、衰减全反射红外光谱(ATR-FTIR)、扫描电子显微镜(SEM)和接触角测定PE膜接枝GMA前后表面性能和表面形貌。用复钙时间、凝血酶原时间、部分凝血活酶时间、凝血酶时间和血小板粘附实验对其抗凝血性能进行评价,结果表明,被修饰PE膜的抗凝血性能显著提高。