Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂. In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂. It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm⁻²) and a low Tafel slope of 58 mV dec⁻¹. The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

Vanadium‐Doped WS2 Nanosheets Grown on Carbon Cloth as a Highly Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Two‐dimensional transition‐metal dichalcogenides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). However, limited active sites and poor conductivity hinder their application. To solve these disadvantages, heteroatom doping has attracted wide attention because it can not only increase the active sites but also affect the intrinsic catalytic properties of the electrocatalyst. Herein, we grew vanadium‐doped WS₂ nanosheets on carbon cloth (V‐WS₂/CC) as an electrocatalyst for HER under acidic and alkaline conditions. With a proper vanadium doping concentration, the electrochemical surface areas of V_0.065‐WS₂/CC were 9.6 and 2.6 times as large as that of pure WS₂ electrocatalyst under acidic and alkaline conditions, respectively. In addition, the charge‐transfer resistance also decreased with moderate vanadium doping. Based on this, the synthesized vanadium‐doped WS₂ nanosheets exhibited good stability with high HER catalytic activity and could reach a current density of 10 mA cm⁻² at overpotentials of 148 and 134 mV in 0.5 m H₂SO₄ and 1 m KOH, respectively. The corresponding Tafel slopes were 71 and 85 mV dec⁻¹. Therefore, our synthesized vanadium‐doped WS₂ nanosheets can be a promising electrocatalyst for the production of hydrogen over a wide pH range.     

Gold Nanoclusters Grown on MoS2 Nanosheets by Pulsed Laser Deposition: An Enhanced Hydrogen Evolution Reaction

Au nanoparticles were decorated on a 2H MoS₂ surface to form an Au/MoS₂ composite by pulse laser deposition. Improved HER activity of Au/MoS₂ is evidenced by a positively shifted overpotential (−77 mV) at a current density of −10 mA cm⁻² compared with pure MoS₂ nanosheets. Experimental evidence shows that the interface between Au and MoS₂ provides more sites to combine protons to form an active H atom. The density functional theory calculations found that new Au active sites on the Au and MoS₂ interface with improved conductivity of the whole system are essential for enhancing HER activity of Au/MoS₂.     

An insight to catalytic synergic effect of Pd-MoS2 nanorods for highly efficient hydrogen evolution reaction

The electrocatalytic hydrogen evolution reaction (HER) is a sustainable energy production route using green chemistry. Transition metal dichalcogenides' application in catalytic hydrogen production is limited due to a lack of solutions that simultaneously address intrinsic activity, increased surface area, electrical conductivity, and stability problems. Herein we address these issues simultaneously by modifying the electronic structure of molybdenum disulfide (MoS₂) nanorods using a low content of Pd (1 wt% and 2 wt%) dopant via a facile colloidal solvothermal route. The resulting MoS₂ nanorods doped with (1 and 2 wt%) palladium demonstrate current density of 100 mA/cm² at quit lower over-potentials of 137 mV and 119 mV than 273 mV for pure MoS₂ nanorods, accompanied by high stability. This research proposes a strategy for designing high-performance HER electrocatalysts that work in acidic medium. In addition, the Tafel slop calculated for MoS₂ is 112 mV/dec whereas for 1 and 2 wt% Pd-MoS₂, the Tafel slopes are 70 mV/dec and 46 mV/dec.     

Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Layered Crystalline and Amorphous Platinum Disulfide (PtS2): Contrasting Electrochemistry

Group 6 transition metal dichalcogenides (TMDs), such as MoS₂ and WS₂ have been extensively studied for various applications while few studies have delved into other TMDs such as platinum dichalcogenides. In this work, layered crystalline and amorphous platinum disulfide (PtS₂) were synthesized, characterised and their fundamental electrochemical properties were investigated. Both materials exhibited inherent oxidation and reduction reactions which would limit their operating potential window for sensing applications. Amorphous phase materials are considered to be promising electrocatalysts due to the porous, and nanostructured morphology with high concentration of unsaturated active sites. The electrocatalytic performances towards oxygen reduction (ORR) and hydrogen evolution reactions (HER) of crystalline and amorphous PtS₂ were analysed. Amorphous PtS₂ was found to exhibit superior electrocatalytic performances towards ORR and HER as compared to crystalline PtS₂. For HER, amorphous and crystalline PtS₂ have overpotential values of 0.30 V and 0.70 V (vs. RHE) at current density of 10 mA cm⁻², respectively. The influence of electrochemical reduction pre-treatment on their catalytic behaviours was also investigated. Electrochemical reduction pre-treatment on both crystalline and amorphous PtS₂ removed the oxidized sulfate groups and increased the proportion of Pt⁰ oxidation state which exposed more catalytic sites. As such, these materials were activated and displayed improved ORR and HER performances. Electrochemically reduced amorphous PtS₂ outperformed the untreated counterparts and exhibited the best HER performance with overpotential of 0.17 V (vs. RHE) at current density of −10 mA cm⁻². These findings provide insights into the electrochemical properties of noble metal PtS₂ in both crystalline and amorphous states which can be activated by electrochemical reduction pre-treatment.     

Activation of MoS2 Basal Planes for Hydrogen Evolution by Zinc

Molybdenum disulfide (MoS₂) has been widely studied as a potential earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER). Defect engineering and heteroelemental doping are effective methods to enhance the catalytic activity in the HER, so exploring an efficient route to simultaneously achieve in‐plane vacancy engineering and elemental doping of MoS₂ is necessary. In this study, Zinc, a low‐cost and moderately active metal, has been used to realize this strategy by generation of sulfur vacancies and zinc doping on MoS₂ in one step. Density functional theory calculations reveal that the zinc atoms not only lower the formation energy of S vacancies, but also help to decrease ΔG_H of S‐vacancy sites near the Zn atoms. At an optimal zinc‐reduced MoS₂ (Zn@MoS₂) example, the activated basal planes contribute to the HER activity with an overpotential of ?194 mV at 10 mA cm^?2 and a low Tafel slope of 78 mV/dec.     

Enhancement of electrochemical and catalytic properties of MoS2 through ball-milling

MoS₂ nanosheets of one to few layer thickness present novel electronic and enhanced catalytic properties with respect to the bulk material. Here we show that a simple and highly scalable ball-milling procedure can lead to significant improvements of the electrochemical and catalytic properties of the bulk natural MoS₂. We characterized the material before and after the milling process by means of scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy in order to evaluate morphological and chemical features. We investigated the electrochemical properties by means of voltammetry techniques to monitor the electron transfer with [Fe(CN)₆]^{4 −/3 −} redox probe and the catalytic properties by monitoring the electrochemical hydrogen evolution reaction (HER). A significant overpotential lowering of about 210 mV is obtained for the HER by the ball-milled material when compared to bulk materials. This has a huge potential for the lowering of the energy consumption during hydrogen evolution. Ball-milling offers highly scalable dry method for large scale production of electrocatalyst with enhanced properties.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Cable-like carbon nanotubes decorated metal-organic framework derived ultrathin CoSe2/CNTs nanosheets for electrocatalytic overall water splitting

The high cost and low reserves of noble metals greatly hinder their practical applications in new energy production and conversion. The exploration of cost-effective alternative electrocatalysts with the ability to drive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is extremely significant to promote overall water splitting. Herein, ultrathin CoSe₂/CNTs nanocomposites have been synthesized by a facile two-step method, where the ultrathin Co-MOF (metal organic-framework) decorated with cable-like carbon nanotubes (CNTs) (Co-MOF/CNTs) was initially fabricated, and followed a low-temperature selenization process. The ultrathin CoSe₂ nanosheets as well as the superior conductivity of CNTs synergistically resulted in abundant active sites and enhanced conductivity to boost the electrocatalytic activity. The as-prepared CoSe₂/CNTs electrocatalysts exhibited an overpotential of 190 mV and 300 mV vs. reversible hydrogen electrode (RHE) at a current density of 10 mA/cm² for the HER and OER in alkaline solution, respectively, and demonstrated superior durability. Furthermore, the as-prepared bifunctional CoSe₂/CNTs electrocatalysts can act as cathode and anode in an electrolyzer, showing a cell voltage of 1.75 V at 10 mA/cm² for overall water splitting.     

3D Carbon Foam Supported Edge-Rich N-Doped MoS2 Nanoflakes for Enhanced Electrocatalytic Hydrogen Evolution

Molybdenum disulfide (MoS₂) is one of the most promising alternatives to the Pt-based electrocatalysts for the hydrogen evolution reaction (HER). However, its performance is currently limited by insufficient active edge sites and poor electron transport. Hence, enormous efforts have been devoted to constructing more active edge sites and improving conductivity to obtain enhanced electrocatalytic performance. Herein, the 3D carbon foam (denoted as CF) supported edge-rich N-doped MoS₂ nanoflakes were successfully fabricated by using the commercially available polyurethane foam (PU) as the 3D substrate and PMo₁₂O₄₀³⁻ clusters (denoted as PMo₁₂) as the Mo source through redox polymerization, followed by sulfurization. Owing to the uniform distribution of nanoscale Mo sources and 3D carbon foam substrate, the as-prepared MoS₂-CF composite possessed well-exposed active edge sites and enhanced electrical conductivity. Systematic investigation demonstrated that the MoS₂-CF composite showed high HER performance with a low overpotential of 92 mV in 1.0 m KOH and 155 mV in 0.5 m H₂SO₄ at a current density of 10 mA cm⁻². This work offers a new pathway for the rational design of MoS₂-based HER electrocatalysts.     

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T−MoS₂ catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T−MoS₂. Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T−MoS₂ layers through cobalt sites to expand interlayer spacing of MoS₂ (Co−1T−MoS₂-bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T−MoS₂ originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co−1T−MoS₂-bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm⁻²). In addition, integrated into an anion-exchange membrane water electrolyzer, Co−1T−MoS₂-bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

In situ electrochemical dehydrogenation of ultrathin Co(OH)2 nanosheets for enhanced hydrogen evolution

Transition metal hydroxides/oxyhydroxides have recently emerged as highly active electrocatalysts for oxygen evolution reaction in alkaline water electrolysis, while have not yet been widely investigated for hydrogen evolution electrocatalysts owing to their unfavorable H*-adsorption, making it difficult to construct an overall-water-splitting cell for hydrogen production. In this work, we proposed a straightforward and effective approach to develop an efficient in-plane heterostructured CoOOH/Co(OH)₂ catalyst via in-situ electrochemical dehydrogenation method, in which the dehydrogenated –CoOOH and Co(OH)₂ at the surface synergistically boost the hydrogen evolution reaction (HER) kinetics in base as confirmed by high-resolution transmission electron microscope, synchrotron X-ray absorption spectroscopy, and electron energy loss spectroscopy. Due to the in-situ dehydrogenation of ultrathin Co(OH)₂ nanosheets, the catalytic activity of the CoOOH/Co(OH)₂ heterostructures is progressively improved, which exhibit outstanding hydrogen-evolving activity in base requiring a low overpotential of 132 mV to afford 10 mA/cm² with very fast reaction kinetics after 60 h dehydrogenation. The gradually improved catalytic performance for the CoOOH/Co(OH)₂ is probably due to the enhanced H*-adsorption induced by the synergistic effect of heterostructures and better conductivity of CoOOH relative to electrically insulating Co(OH)₂. This work will open the opportunity for a new family of transition metal hydroxides/oxyhydroxides as active HER catalysts, and also highlight the importance of using in situ techniques to construct precious metal-free efficient catalysts for alkaline hydrogen evolution.     

Flower-like NiCo2S4/NiFeP/NF composite material as an effective electrocatalyst with high overall water splitting performance

Rational design and building of high efficiency, secure and inexpensive electrocatalyst is a pressing demand and performance to promote sustainable improvement of hydrogen energy. The bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution response (HER) with high catalytic performance and steadiness in the equal electrolyte are extra treasured and meaningful. Herein, a unique three-dimensional (3D) structure electrocatalyst for NiCo₂S₄ growing on the flower-like NiFeP was designed and synthesized in this study. The results show that the flower-like NiCo₂S₄/NiFeP/NF composite electrocatalyst has large specific surface area, appropriate electrical conductivity, and greater lively websites uncovered in the three-dimensional structure, and affords extraordinary electrocatalytic overall performance for the ordinary water splitting. In alkaline solution, the OER and HER overpotentials of NiCo₂S₄/NiFeP/NF only need 293 mV and 205 mV overpotential to provide the current densities of 100 mA/cm² and 50 mA/cm², respectively. This high electrocatalytic activity exceeds the catalytic activity of most nickel-iron based electrocatalysts for OER and HER process. Accordingly, the optimized NiCo₂S₄/NiFeP/NF sample has higher stability (24 h) at 1.560 and 10 mA/cm², which extensively speeds up the overall water splitting process. In view of the above performance, this work offers a fine approach for the further improvement of low fee and excessive effectivity electrocatalyst.