Magnetostatic Coupling in CoFe2O4/Pb(Zr0.53Ti0.47)O3 Magnetoelectric Composite Thin Films of 2-2 Type Structure

CoFe₂O₄/Pb(Zr_0.53Ti_0.47)O₃ (CFO/PZT) magnetoelectric composite thin films of 2-2 type structure had been prepared onto Pt/Ti/SiO₂/Si substrate by a sol-gel process and spin coat-ing technique. The structure of the prepared thin film is substrate/PZT/CFO/PZT/CFO. Two CFO ferromagnetic layers are separated from each other by a thin PZT layer. The upper CFO layer is magnetostatically coupled with the lower CFO layer. Subsequent scan-ning electron microscopy (SEM) investigations show that the prepared thin films exhibit good morphologies and compact structure, and cross-sectional micrographs clearly display a multilayered nanostructure of multilayered thin films. The composite thin films exhibit both good magnetic and ferroelectric properties. The spacing between ferromagnetic layers can be varied by adjusting the thickness of intermediate PZT layer. It is found that the strength of magnetostatic coupling has a great impact on magnetoelectric properties of composite thin films, i.e., the magnetoelectric voltage coefficient of composite thin film tends to increase with the decreasing of pacing between two neighboring CFO ferromagnetic layers as a result of magnetostatic coupling effect.     

Layer-by-layer self-assembly preparation of layered double hydroxide/polyelectrolyte nanofilms monitored by surface plasmon resonance spectroscopy

Layer-by-layer self-assembly was used to prepare nanofilms of (2:1) MgAl-layered double hydroxide (LDH) nanoparticles and polyacrylic acid or sodium polystyrene sulfonate. The multilayers were attached to ~50-nm thick gold films on microscopy glass slides prepared by vacuum evaporation. The contact between the gold film and the multilayered films was mediated via surface modification with thiols, adsorption of poly(diallyl dimethyl ammonium) chloride (PDDA) or direct binding of the LDH particles. Surface plasmon resonance (SPR) spectra of the multilayered films were analyzed by fitting the Fresnel equations. The shifts in the SPR angle (_SPR) due to the adsorption/deposition on the gold surface were used to evaluate the process of building up the multilayers. Strong surface/multilayer contact formed when electrostatic attraction and hydrophobic interaction were combined as in the case of mercaptopropanoic acid or PDDA sticking layers. The LDH suspension concentration strongly influenced the number of deposited layers. The multilayer films were investigated by reflection FT-IR spectroscopy.     

Round‐robin test for the measurement of layer thickness of multilayer films by secondary ion mass spectrometry depth profiling

An international round‐robin test (RRT) was performed to investigate a method to determine the interface location and the layer thickness of multilayer films by secondary ion mass spectrometry (SIMS) depth profiling as a preliminary study to develop a new work item proposal in ISO/TC‐201. Two types of reference materials were used in this RRT. A SiGe alloy (Si_52.4Ge_47.6) reference film was used to determine the relative sensitivity factors of Si and Ge. A Si/Ge multilayer reference film was used to determine the relative sputtering rates of the Si and Ge layers. The layer thicknesses were measured from the interfaces determined by a 50 atomic percent definition. Seven laboratories from 5 countries participated in this international RRT. The RRT reference expanded uncertainties for Si and Ge layers in a Si/Ge multilayer with similar thicknesses as the reference film were 0.76 and 1.17 nm, respectively. However, those in a thinner Si/Ge multilayer film were slightly larger at 1.04 and 1.59 nm, respectively. Most of the thickness ratios in the 2 Si/Ge multilayer films were consistent with the RRT reference value within their expanded uncertainties.     

交联结构对肝素/壳聚糖层层组装多层膜内皮细胞相容性的影响

采用1-乙基-(3-二甲基氨基丙基)碳酰二亚胺交联技术对具有抗凝血抗菌作用的肝素/壳聚糖多层膜进行交联, 研究了交联结构对多层膜稳定性和血管内皮细胞亲和性的影响. QCM-D结果显示, 交联可有效地提高多层膜的稳定性, 在模拟人体血液流速(3.0 cm/s)下保持良好的稳定. 体外内皮细胞的研究结果显示, 多层膜的交联可有效地调节肝素/壳聚糖多层膜表面粘弹性, 并显著增加内皮细胞的粘附与生长. 交联的肝素/壳聚糖多层膜有望成为理想的心血管功能界面涂层材料.     

The antioxygen radiation properties of the nanocomposite film consisted of hydrogenated amorphous carbon (a-C:H) and MoS2

MoS₂/a-C:H multilayer film and MoS₂/a-C:H composite film exhibit excellent tribological properties in vacuum, which can be used as the potential space lubricant. The radiation-protective properties of these two films in atomic oxygen (AO) are evaluated. The influences of AO radiation on structure, morphology, and tribological properties of the films were investigated. The results show that AO radiation mainly causes oxidation and increases sp² C content in both of the films. Furthermore, the MoS₂ sublayer on the surface of the multilayer film is oxidized heavily, whereas both the MoS₂ and the a-C:H matrix on the surface were oxidized in the composite film. As a result of this, the multilayer film exhibits high friction coefficient and short sliding lifetime in vacuum after AO radiation. Compared with that, the composite film exhibits lower friction and longer sliding time more than 3600 seconds in vacuum, which illustrates it has a good AO radiation protection. This indicates that MoS₂/a-C:H composite film is more likely to be used as a potential space lubricant.     

聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

Layer‐by‐layer assembly of {chitosan/Pd}n multilayer film based on in‐situ photochemical reduction with excellent electrocatalytic properties

Chitosan/palladium {CTS/Pd}_n composite multilayer film was assembled based on layer‐by‐layer self‐assembly technique and in‐situ photo‐chemical reduction reaction, in which the CTS plays the role of a photo‐reduction agent and an assembly reagent. Transmission electron microscopy (TEM) shows that spherical Pd nanoparticles with diameter of 20 nm are well‐dispersed in the composite multilayer films, and the size of Pd nanoparticles increased gradually with the extension of illumination time. Besides, the {CTS/Pd}_n composite multilayer film exhibits linear, uniform and regular layer‐by‐layer growth. Furthermore, the {CTS/Pd}_n composite multilayer film presents an excellent catalytic properties for oxygen reduction, and it has potential application in energy, chemical synthesis and biological processes. Copyright © 2015 John Wiley & Sons, Ltd.     

A new copper(I) coordination polymer from 2,6-bis(1H-benzotriazol-1-ylmethyl)pyridine: Synthesis,characterization, and use as additive in transparent submicron UV filters

The use of a new copper(I) coordination polymer (CP) as additive in transparent composite films of 190 nm of thickness for ultraviolet (UV) shielding is presented. The luminescent 1-D Cu(I) CP was easily synthesized through a self-assembly process between Cu(I) iodide and 2,6-bis(1H-benzotriazol-1-ylmethyl)pyridine (L). The CP, [Cu₂(μ ? I)₂(μ ? L)₂]_n, was structurally characterized by infrared, UV–visible diffuse reflectance and photoluminescence spectroscopy, elemental and thermogravimetric analyses, single-crystal and powder X-ray diffraction, and relativistic density functional theory calculations. The CP was dispersed and immobilized into a polymeric matrix in the presence of Sudan I, yielding a composite material that exhibits a reduction of 49% of the UV transmittance at 350 nm. Thus, the use of a new Cu(I) CP in polymeric composite films appears as a novel approach toward ultrathin and transparent UV shielding films, which have potential applications as protection layers of paints and coatings that tend to degrade when exposed to UV radiation.     

Fabrication of Covalently Attached Multilayer Film Electrode Containing Iron Porphyrin and Its Electrocatalysis Toward Sulfite

Construction of a highly stable covalently attached multilayer film electrode containing iron porphyrin was achieved by UV irradiation of ionic self‐assembled multilayer films of diazo‐resins (DAR) and anionic Fe(III)tetrakis(p‐sulfonatophenyl)porphyrin (FeTSPP). The multilayer films had been characterized by UV, IR spectra and cyclic valtammetry. The electrocatalytic transformation of sulfite to SO₄^2? by the multilayer film electrode containing FeTSPP was investigated. In 0.1 M NH₄OH? NH₄Cl buffer solution (pH 8.74) and 0.1 M borate buffer solution (pH 9.18) the electrocatalytic oxidation of sulfite through the multilayer film electrode can be performed. However, in acetate buffer solution (pH 4.0) the electrocatalytic reduction of sulfite by the multilayer film electrode had also good activity. The modified electrode also exhibited a fast response and good stability.     

Optical,structural and electrochromic studies of molybdenum oxide thin films with nanorod structure

The MoO₃ thin films were prepared via sol–gel dip coating method on glass and FTO glass substrate. The optical and other properties of multilayered MoO₃ films with 2–10 layers were investigated. The MoO₃ films were studied using UV–Visible transmission, XRD, SEM, FTIR and Cyclic Voltammetry (CV) measurements. The band gap value for MoO₃ films was evaluated and in the range of 3.2 eV–3.72 eV. The XRD spectrum reveals that the crystallinity increases along the (020) and (040) planes with the increase in thickness. The SEM images showed the formation of nanorods upto six layers. The FTIR spectrum confirms the formation of MoO₃. The 6 layered films show the maximum anodic (spike)/cathodic (peak) diffusion coefficient of 18.84/1.701 × 10^?11 cm²/s. The same film exhibits the change in optical transmission of 49% with the bleached/coloured state transmission of 62/13%.     

Accumulation of monomolecular polystyrene particles from a water surface onto a substrate

Monomolecular particles of polystyrene (M_w/M_n = 1.04, M_w = 3.84 ? 10⁶) formed by spreading of a dilute solution in benzene over a water surface were successfully accumulated onto a hydrophobic substrate by the horizontal lifting method. The accumulation was quantitative (up to 66 layers) to give a multilayer film. The substrates used were silicon single crystals, quartz coated with an iron(III) stearate monolayer, and poly(methylmethacrylate) plates. The film contained voids amounting to 20-30 vol%. The surface structure observed by transmission electron microscopy clearly showed a multilayer, particle structure. These facts indicate that the molecules exist as monomolecular particles in the film. The film should be a suitable material to study properties of polymeric monomolecules in a very unusual state as compared with the ordinary solid.     

Effects of film structure on electrochromic properties of the multilayer films containing polyoxometalates

Multilayer films of tungstophosphate anion (P₂W₁₈) and poly(allylamine hydrochloride) (PAH) were fabricated on quartz and ITO substrates by layer-by-layer self-assembly method. These films were characterized by UV–vis spectroscopy, cyclic voltammetry (CV), chronoamperometric (CA), chronocoulometry (CC) and atomic force microscopy (AFM). The effects of film structure on multilayer electrochromic properties were investigated. The electrochromic responses of the composite films were related to the surface coverage of anion and multilayer thickness. It was found that higher concentration of polycation and anion, or adding salt to the polycation solution used for multilayer film preparation led to thicker and denser film structure which improved optical contrast and coloration efficiency whereas prolonged response time.     

Surface films obtained by electrochemical oxidation of 1,11-bis(3-indolizinin-2-ylquinoxalin-2-on-1-yl)-3,6,9-trioxyundecane

Electrochemical oxidation of 1,11-bis(3-indolizinin-2-ylquinoxalin-2-on-1-yl)-3,6,9-trioxyundecane in 0.1 M Et₄NClO₄ in MeCN on a glassy-carbon electrode leads to surface films of two types depending on the film formation mode. Oxidation at controlled first-peak potentials (E _p ¹ = 0.30 V relative to Fc/Fc⁺) or in the range of potentials ?0.60 → +0.40 → ?0.60 V, ?0.60 → +0.40 → ?1.60 → ?0.60 V in the polycycling mode forms a redox-active film that covers the entire surface of the electrode. The quinoxaline fragments of the film are reduced irreversibly in the supporting solution, while the indolizine fragments are reduced reversibly, forming stable radical cation states; the latter are recorded by ESR in the form of a singlet with a variable width (g = 2.0025, ΔH = 0.15?0.5 mT). The oxidized (radical cation) form of the film is conductive, while the neutral film is not. An insulating film is obtained when oxidation is performed under rigid conditions (?0.60 → +1.70 → ?1.70 → ?0.60 V). Both types of film are colored and have nanosized pores (channels), which can play a discriminant role. It is demonstrated (using the discriminant role of pores) that small molecules may be selectively reduced on film-coated electrodes in the presence of bulkier and more reactive substrates.     

聚酰亚胺多层膜的制备及其在非线性光学中的应用

报道了一种通过旋涂制备NLO聚合物多层膜的方法.紫外-可见吸收光谱及膜的厚度表征说明,在所得多层膜的结构中,聚合物单层膜的厚度可以较好地控制在100~200nm之间,所得含有5个双层的NLO多层膜(厚度1.6μm)具有良好的结构均一性,光学显微镜下没有观察到明显的结构缺陷.与单层具有较大厚度的NLO聚合物薄膜(如2~4μm)相比,所得聚合物多层膜可以允许掺杂更多的发色团而不发生相分离.     

Metal-enhanced fluorescence using silver nanoparticles-embedded polyelectrolyte multilayer films for microarray-based immunoassays

Metal-enhanced fluorescence (MEF) of quantum dots (QDs) and its potential application in microarray-based immunoassays was investigated using silver nanoparticles (AgNPs) prepared by the in situ photoreduction of Ag⁺ inside a multilayer film consisting of poly(ethyleneimine) (PEI) and hyaluronic acid (HA). UV–Vis spectroscopy, X-ray diffraction, atomic force microscopy, scanning electron microscopy, and transmission electron microscopy confirmed the formation of well-dispersed AgNPs within the multilayer films, the thickness and the amount of which depended on the number of HA layers. Using AgNPs-containing hybrid multilayered films, it was possible to observe the MEF effect of adsorbed QDs, which could be tuned by the thickness of interlayer spacer film prepared of the layer-by-layer assembly of PEI and poly(styrene sulfonate). When the MEF-inducing hybrid film was used as a platform for immunoassay, a significant improvement in the fluorescence signal and sensitivity of the biosensing were observed in the presence of AgNPs in comparison with films that did not contain the nanoparticles.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

3D Printing of Drug Nanocrystals for Film Formulations

The aim of the study was to prepare indomethacin nanocrystal-loaded, 3D-printed, fast-dissolving oral polymeric film formulations. Nanocrystals were produced by the wet pearl milling technique, and 3D printing was performed by the semi-solid extrusion method. Hydroxypropyl methyl cellulose (HPMC) was the film-forming polymer, and glycerol the plasticizer. In-depth physicochemical characterization was made, including solid-state determination, particle size and size deviation analysis, film appearance evaluation, determination of weight variation, thickness, folding endurance, drug content uniformity, and disintegration time, and drug release testing. In drug nanocrystal studies, three different stabilizers were tested. Poloxamer F68 produced the smallest and most homogeneous particles, with particle size values of 230 nm and PI values below 0.20, and was selected as a stabilizer for the drug-loaded film studies. In printing studies, the polymer concentration was first optimized with drug-free formulations. The best mechanical film properties were achieved for the films with HPMC concentrations of 2.85% (w/w) and 3.5% (w/w), and these two HPMC levels were selected for further drug-loaded film studies. Besides, in the drug-loaded film printing studies, three different drug levels were tested. With the optimum concentration, films were flexible and homogeneous, disintegrated in 1 to 2.5 min, and released the drug in 2–3 min. Drug nanocrystals remained in the nano size range in the polymer films, particle sizes being in all film formulations from 300 to 500 nm. When the 3D-printed polymer films were compared to traditional film-casted polymer films, the physicochemical behavior and pharmaceutical performance of the films were very similar. As a conclusion, 3D printing of drug nanocrystals in oral polymeric film formulations is a very promising option for the production of immediate-release improved- solubility formulations.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in sol–gel-derived tin oxide/gelatin composite films

Horseradish peroxidase (HRP) was immobilized into a new type of sol–gel-derived nano-sized tin oxide/gelatin composite film (SnO₂ composite film) using a sol–gel film/enzyme/sol–gel film “sandwich” configuration. Direct electrochemistry and electrocatalysis of HRP incorporated into the composite films were investigated. HRP/SnO₂ composite film exhibited a pair of stable and quasi-reversible cyclic voltammetric peaks for the HRP Fe(III)/HRP Fe(II) redox couple with a formal potential of about −0.25 V (vs. SCE) in a pH 6.0 phosphate buffer solution. The electron transfer between the enzyme and the underlying electrode was greatly enhanced in the microenvironment with nano-SnO₂ particles and nanoporous structures. Morphologies and microstructures of the composite films and HRP/composite films were characterized with TEM, AFM. Electrochemical impedance spectroscopy (EIS) was also used to feature the HRP incorporated into composite films. FTIR and UV–Vis spectroscopy demonstrated that HRP in the composite film could retain its native secondary structure. With the advantages of organic–inorganic hybrid materials, the HRP/SnO₂ composite film modified electrode displayed good stability and electrocatalytic activity to the reduction of H₂O₂, The apparent Michaelis-Menten constant was estimated to be 0.345 mM, indicating a high affinity of HRP entrapped into the composite film toward H₂O₂.     

Relationship between the polymer/silica interaction and properties of silica composite materials

Cast film composites have been prepared from aqueous polymer solutions containing nanometric silica particles. The polymers were polyvinyl alcohol (PVA), hydroxypropylmethylcellulose (HPMC) and a blend of PVA‐HPMC polymers. In the aqueous dispersions, the polymer–silica interactions were studied through adsorption isotherms. These experiments indicated that HPMC has a high affinity for silica surfaces, and can adsorb at high coverage; conversely, low affinity and low coverage were found in the case of PVA. In the films, the organization of silica particles was investigated through transmission electron microscopy (TEM) and small‐angle neutron scattering (SANS). Both methods showed that the silica particles were well‐dispersed in the HPMC films and aggregated in the PVA films. The mechanical properties of the composite films were evaluated using tensile strength measurements. Both polymers were solid materials, with a high‐elastic modulus (65 MPa for HPMC and 291 for PVA) and a low‐maximum elongation at break (0.15 mm for HPMC and 4.12 mm for PVA). In HPMC films, the presence of silica particles led to an increase in the modulus and a decrease in the stress at break. In PVA films, the modulus decreased but the stress at break increased upon adding silica. Accordingly, the polymer/silica interaction can be used to tune the mechanical properties of such composite films. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1134–1146, 2006     

Fe(II) Spin Crossover/Polymer Hybrid Materials: Investigation of the SCO Behavior via Temperature-Dependent Raman Spectroscopy,Physicochemical Characterization and Migration Release Study

Polymeric composites constitute an appealing class of materials with applications in various fields. Spin crossover (SCO) coordination complexes are switchable materials with potential use in data storage and sensors. Their incorporation into polymers can be considered an effective method for their wider practical application. In this study, Fe(II) SCO/polylactic acid hybrid polymeric composites have been prepared by film casting. The mononuclear coordination complex [Fe{N(CN)₂}₂(abpt)₂] was incorporated into polylactic acid. The morphological, structural and thermoanalytical characterization of the composite films were performed via scanning electron microscopy (SEM), attenuated total reflectance (ATR/FTIR), Raman spectroscopy and differential scanning calorimetry (DSC). In addition, the migration release study (MRS) of the SCO compound from the polymeric matrix into the food simulant 50% v/v water/ethanol solution was also examined via UV/Vis absorption. Of particular interest was the investigation of the SCO behavior of the coordination complex after its incorporation into the polymer matrix; it was accomplished by temperature-dependent micro-Raman spectroscopy. The described attempt could be considered a preparatory step toward the development of SCO-based temperature sensors integrated into food packaging materials.