Photophysical characteristics of 4,4′-bis(N-carbazolyl)tolan derivatives and their application in organic light emitting diodes

4,4′-bis(N-carbazolyl)tolan (BCT) and 4,4′-bis[N-(3,6-di-t-butyl)carbazolyl]tolan (BCT-t-Bu) were synthesized as π-expanded analogs of 4,4′-bis(N-carbazolyl)biphenyl. Their photophysical characteristics both in solution and films were thoroughly investigated. Interestingly, the phosphorescence spectrum of BCT was significantly medium-dependent, and the emission maximum was red-shifted by 131 nm from 489 nm in solution at 77 K to 620 nm in a deposited film at 5 K, suggesting the presence of strong intermolecular interactions in the film. BCT and BCT-t-Bu were found to be useful as host materials for fluorescence-based organic light emitting diodes (OLEDs). However, their low triplet energy levels in films negated their potential to act as hosts in phosphorescence-based OLEDs.     

Microwave‐assisted synthesis of organic/inorganic hybrid nanocomposites and their encapsulating applications for photoelectric devices

UV curable organic/inorganic hybrid nanocomposites with high refractive indices, moderate hardness, good adhesive strength, and excellent gas blocking performances have been successfully rapidly synthesized by in situ microwave‐assisted heating process. We find that the chemical structures of polymer matrices influence the physical properties and addition of silicone and polyurethane (PU) into the acrylics backbone can further reduce the gas permeation and increase the adhesive strength as well as refractive indices. Moreover, lab‐made Silicone/PU/Acrylics I nanocomposites have also been utilized for the encapsulation of organic solar cells, LEDs, OLEDs, and flexible OLEDs. The experimental results demonstrate that they can effectively hinder the penetration of oxygen as well as moisture in the atmosphere into the photoelectric devices, consequently prolonging their lifetimes. Copyright © 2010 John Wiley & Sons, Ltd.     

Structure and thermal behaviors of organic crystals based on substituted 1,3,4-thiadiazoles

The crystalline structure of some compounds containing the 1,3,4-thiadiazole moiety, (1) 5-ethyl-2-amino-1,3,4- thiadiazole (EATZ), (2) 5-benzylsulfany-2-amino-1,3,4-thiadiazole (BSATZ) and (3) 2,5-bis-benzylsulfanyl-1,3,4-thiadiazole (BBSTZ) were determined. Both EATZ and BBSTZ show orthorhombic structures with space group Pbca and BSATZ a monoclinic system with space group C2/c. The lattice parameters: a=0.72280 (14), b=1.0811 (2), c=1.6210 (3) nm for 1, a=2.5282 (5), b=0.59083 (12), c=1.5390 (3) nm for 2 and a=0.87530 (18), b=1.0365 (2), c=3.6098 (7) nm for 3. To compare the intra- and intermolecular interactions in thiadiazole containing organic crystals, thermal analysis studies on each crystal is performed using DSC and TG in N₂ atmosphere to describe the thermal behaviors. Based on the results, the changing regularity of melting point and decomposition temperature of these compounds is educed     

Photoconductivity of thin organic films

Thin organic films were deposited on silicon oxide surfaces with golden interdigitated electrodes (interelectrode gap was 2 μm), and the film resistivities were measured in dark and under white light illumination. The compounds selected for the measurements include molecules widely used in solar cell applications, such as polythiophene (PHT), fullerene (C₆₀), pyrelene tetracarboxylic diimide (PTCDI) and copper phthalocyanine (CuPc), as well as molecules potentially interesting for photovoltaic applications, e.g. porphyrin-fullerene dyads. The films were deposited using thermal evaporation (e.g. for C₆₀ and CuPc films), spin coating for PHT, and Langmuir-Schaeffer for the layer-by-layer deposition of porphyrin-fullerene dyads. The most conducting materials in the series are films of PHT and CuPc with resistivities 1.2 × 10³ Ω m and 3 × 10⁴ Ω m, respectively. Under light illumination resistivity of all films decreases, with the strongest light effect observed for PTCDI, for which resistivity decreases by 100 times, from 3.2 × 10⁸ Ω m in dark to 3.1 × 10⁶ Ω m under the light.     

Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

High light electroluminescence of novel Cu(I) complexes

Three novel Cu(I) complexes, [CuDPEphos(NN)]BF₄, where NN=1-(4-5′-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (OXD-Pybm; L1) (1), 1-(4-carbazolylbutyl)-2-pyridinylbenzimidazole (Carl-Pybm; L2) (2), and 1-H-2-pyridinylbenzimidazole (HPybm; L3) (3), were synthesized. The photoluminescent (PL) properties of 1-3 and the electroluminescent (EL) properties of complexes 1 and 2 were systematically studied. The maximum brightness of 2-based devices was 8669 cd/m², which should be the best among the reported Cu(I) complexes-based devices.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

Photoinduced electron transfer within a novel synthesized short-chain dyad

The investigations were made by using electrochemical, steady state and time resolved spectroscopic (time correlated single photon counting and laser flash photolysis) techniques on a novel synthesized dyad, 1-(4-chloro-phenyl)-3-(4-methoxy-naphthalen-1-yl)-propenone (MNCA) where the donor 1-methoxy-naphthalene (MNT) is connected with the acceptor p-chloroacetophenone (PCA) by an unsaturated olefinic bond. This dyad possesses mainly extended (E-type) conformation both in the ground and excited state. The unchanged conformational geometry of this dyad even after photoexcitation makes it different from the previously studied benzothiophene-p-chloroacetophenone dyads, though both the donors present are isosteric molecules. In the cases of the latter dyads though E-type isomeric structure dominates in the ground state, considerable amount of Z-type (folded) species are produced in the excited state. It is hinted that the proximity effect of methoxy functionality in donor moiety, may be the reason for the formation of mostly E-isomeric species in the case of the present dyad MNCA system. The observed unchanged values of charge recombination and ion-pair lifetime, estimated from the analysis of transient absorption spectra of the dyad in presence of βCD and without it, confirm the proposition about the maintenance of the extended conformation even upon photoexcitation. From the transient absorption measurements it appears that due to increase of delay times between the exciting and probe pulses, higher triplet T_n of the donor being generated gets involved in PET reactions with the surrounding medium ACN. From the present findings, MNCA in aqueous medium seems to be better candidate to build light energy conversion devices than the previously studied benzothiophene dyads where artificial devices like βCD were used to make elongated geometry. This geometry would help to prevent charge recombination processes within the redox components due to minimal overlapping between them.     

Three-dimensional magnetic properties of soft magnetic composite materials

A three-dimensional (3-D) magnetic property measurement system, which can control the three components of the magnetic flux density B vector and measure the magnetic field strength H vector in a cubic sample of soft magnetic material, has been developed and calibrated. This paper studies the relationship between the B and H loci in 3-D space, and the power losses features of a soft magnetic composite when the B loci are controlled to be circles with increasing magnitudes and ellipses evolving from a straight line to circle in three orthogonal planes. It is found that the B and H loci lie in the same magnetization plane, but the H loci and power losses strongly depend on the orientation, position, and process of magnetization. On the other hand, the H vector evolves into a unique locus, and the power loss approaches a unique value, respectively, when the B vector evolves into the round locus with the same magnitude from either a series of circles or ellipses.     

Isomerization and fluorescence characteristics of sterically hindered azobenzene derivatives

We report synthesis and isomerization behaviors of sterically hindered azobenzene derivatives (1 and 2) with decyloxy and hydroxy groups, respectively, and their fluorescence enhancement under UV light irradiation characterized by means of absorption and fluorescence spectroscopy measurements. Upon irradiation of as-prepared solution (1) with UV light (∼200 mJ/cm²) a cis-rich photostationary state was reached. Obviously different from 2 showing very fast thermal cis-to-trans isomerization within 2 min, slow cis-to-trans thermal back isomerization of 1 with a long alkyl chain at ambient temperature was observed on the time scale of weeks. In contrast to no striking changes in absorption and fluorescence spectra of compound 2, the azobenzene 1 showed green fluorescence upon prolonged irradiation with UV light (about 3-8 J/cm² exposure doses), although both the initial trans-rich and cis-rich states of azobenzene molecules were not fluorescent in solution. The stability of fluorescence efficiency caused by drying and redissolving processes was examined.     

Cubic helimagnets in magnetic field and at pressure

Cubic helimagnets with B20 structure display several unusual properties such as anisotropy of the spin-wave spectrum al small momenta q, rotation of the helix vector k in magnetic field and quantum phase transition at pressure. We demonstrate that first two phenomena are a result of umklapp processes mixing excitations with momenta q, q+k and q−k. At very low magnetic field perpendicular to k the helical structure remains stable due to spin-wave gap Δ. Its square is sum of two parts. The first one is a result of the magnon interaction and the second negative part stems from magneto-elastic interaction. It is suggested that competition between these parts leads to the quantum phase transition observed in MnSi and FeGe. For MnSi from rough estimations at ambient pressure was shown that both parts are comparable with the experimentally observed gap. The magneto-elastic interaction is also responsible for 2k modulation of the lattice and contributes to the magnetic anisotropy. Experimental observation by X-ray and neutron scattering of this lattice modulation allows to determine the strength of the magneto-elastic interaction responsible for above phenomena and the lattice helicity.     

Surface-enhanced Raman scattering studies on bombesin, its selected fragments and related peptides adsorbed at the silver colloidal surface

SERS studies presented in this work on BN^8-14, [d-Phe⁶,β-Ala¹¹,Phe¹³,Nle¹⁴]BN^6-14, [d-Tyr⁶,β-Ala¹¹,Phe¹³,Nle¹⁴]BN^6-14, BN and its modified analogues, as well as NMB, NMC, and PG-L show that these molecules at pH 8.3 bind to a colloidal silver surface mainly through Trp⁸ and Met¹⁴ residues. Trp⁸ adsorbs at the surface almost perpendicularly. Met¹⁴ appears on the surface mainly as a P_C-G conformer. His¹², as is evident from the spectra, practically does not take part in the adsorption process. Substitution of l-leucine at the 13 position of amino acid sequence with l-phenylalanine does not change substantially the pattern of the adsorption mechanism; however, substitution of phenylalanine at the 12 position (instead of l-histidine) causes changes in the SERS spectra that show that Phe¹² takes parallel orientation to the surface upon adsorption of [d-Phe¹²]BN, while in the case of [Tyr⁴,d-Phe¹²]BN this residue is perpendicular to the surface and influences the orientation of the bound Trp⁸. On the other hand, substitution of Asn with Tyr in the 6 position in nonapeptide fragment causes changes in the adsorption mechanism. In this case, the discussed fragment binds to the silver colloidal surface by Tyr⁶, Trp⁸, and Met¹⁴. The SERS spectrum of NMC is very similar to that of BN; although it differs by the binding orientation of the amide bond towards the surface. Appearance of Phe¹³ in NMB and PG-L causes that this residue competes successfully with Trp⁸ forcing it to take tilted orientation. As seen from the enhancement of the characteristic Phe vibrations this moiety in NMB and PG-L adsorbs on the silver surface in a tilted fashion. This arrangements cause that the 8-14 peptide chain in all these studied compounds takes almost a parallel orientation to the surface while the 1-5 fragment of the peptide chain is removed from the silver surface vicinity.     

Synthesis and properties of fluorescent hybrid nanocomposites based on copolyacrylates with dansyl semicarbazide units

Our study examined a series of hybrid composites containing copolyacrylate with semicarbazide-dansyl groups prepared by conventional radical polymerization of monomers in the organic montmorillonite modified with alkyl chains of variable length or using the sol-gel technique. The structure and the chemical composition of the copolymers N‐methacryloyloxyethylcarbamoyl-5-(dimethylaminonaphtalene-1-sulfonohydrazine)-co-methyl metahacrylate (DnsSA-co-MMA) and N‐methacryloyloxyethylcarbamoyl-5-(dimethylaminonaphtalene-1-sulfonohydrazine)-co-dodecylacrylamide (DnsSA-co-DA) as well as their nanocomposites (HC-P1, HC-P2, HC-P3, HC-P4) were confirmed by spectral analysis (¹H NMR, FTIR, UV/vis), thermal methods and atomic force microscopy. To quantify the effect of the inorganic component compared to pure photopolymers we evaluated the properties of hybrid composites, including dielectric characterization. Additionally, these materials have been tested in experiments of fluorescence quenching by acids (HCl, p-toluenesulfonic acid, 1-S-camphorsulfonic acid), metallic cation (Cu²⁺) and nitrobenzene. The results suggest that such nanocomposites could find applications as fluorescence-based chemosensors in homogeneous organic solutions or thin films.     

Surface-modification of TiO2 with new metalloporphyrins and their photocatalytic activity in the degradation of 4-notrophenol

A new mono-functionalized porphyrin derivative, 5-mono-[4-(2-(4-hydroxy)-phenoxy)ethoxy]-10,15,20-triphenylporphyrin (3) and its Cu(II) (3a), Zn(II) (3b) and Ni(II) (3c) metalloporphyrins were synthesized and characterized by using various spectroscopic techniques. The corresponding 3a, 3b, 3c-TiO₂ photocatalysts were then prepared and characterized by means of FT-IR and diffused reflectance spectra, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic activities of 3a, 3b, 3c-TiO₂ were investigated by testing the photodegradation of 4-nitrophenol (4-NP) in aqueous solution under the halogen lamp irradiation. The results indicated that all the 3a, 3b, 3c enhanced the photocatalytic efficiency of bare TiO₂ in photodegrading the 4-NP, and 3a-TiO₂ exhibited the highest photocatalytic activity. The result is considered a combined action of potential match of 3a with TiO₂ CB and effective impregnated of 3a onto the surface of TiO₂.     

Eu(III) and Tb(III) luminescent lanthanide systems derived from DTPA-bisamide and DTTA-based ligands incorporating bipyridine antenna

Four new polycarboxylate ligands H₃Lⁿ have been synthesized by the attachment of two or one 2,2′-bipyridine subunits onto a diethylenetriamine pentacarboxylic acid (DTPA-bisamide derivatives: H₃L¹, H₃L²) or a diethylenetriamine tricarboxylic acid (DTTA derivatives: H₃L³, H₃L⁴) core. The neutral Eu^III and Tb^III complexes of these chelates have been prepared and studied from their UV-vis and luminescence data. The main photophysical characteristics of these complexes, i.e. the absorption and luminescence spectra, the metal-centred lifetimes and the overall luminescence yields (Φ) were measured in buffered aqueous solutions. In addition the role played by non-radiative paths (vibrational energy transfer involving coordinated water molecules, involvement of ligand-to-metal charge-transfer excited states, or metal→ligand back-transfer) was investigated. In all complexes, we found that the bidentate bipyridine chromophore is not coordinated to the lanthanide ion, allowing one (LnL¹, LnL²) or two (LnL³, LnL⁴) water molecules to penetrate the first coordination sphere of the metal. Although the bipyridine chromophore behaves as remote (from the binding site) light-harvesting unit for the lanthanide ion in these systems, a sizeable sensitization of the Eu- and Tb-centred luminescence can be effective (LnL², LnL³, Φ=16-19% in aerated D₂O solutions). Our photophysical investigations show that overall non-radiative deactivation is not dependant of thermally activated non-radiative channels but the efficiency of the ligand→Ln intramolecular energy transfer has to be taken into account to explain the obtained results.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Self-consistent treatment of spin and magnetization dynamic effect in spin transfer switching

The effect of itinerant spin moment (m) dynamic in spin transfer switching has been ignored in most previous theoretical studies of the magnetization (M) dynamics. Thus in this paper, we proposed a more refined micromagnetic model of spin transfer switching that takes into account in a self-consistent manner of the coupled m and M dynamics. The numerical results obtained from this model further shed insight on the switching profiles of m and M, both of which show particular sensitivity to parameters such as the anisotropy field, the spin torque field, and the initial deviation between m and M.     

Spectroscopic and thermodynamic features of conical bubble luminescence

The influence on luminescence from conical bubble collapse (CBL) with varying Ar gas content while perturbing the liquid 1,2-Propanediol (PD) has been investigated. The temporal, spatial, and spectral features were analysed with regards to the dynamics of collapse and liquid degradation. Sulphuric acid and sodium chloride were added to disturb the liquid. The following three cases were studied: PD/Ar, (I), (PD + H₂SO₄)/Ar, (II), and (PD + H₂SO₄ + NaCl)/Ar, (III). The intensities of those cases decrease as III > II > I. Temporally, single and multiple light emissions were found to occur. The pulse shape exhibited a large variety of profiles with a main maximum and up to two local maxima around the main maximum. These local maxima resembled those generated by laser cavitation. Spatially, no radial symmetry was detected in the light emissions. Spectrally, the Swan, CH and CN lines were observed at low volumes of gas and driving pressure. The OH radical and OH-Ar bands, as well as the Na and K lines, consistently appeared superimposed on an underlying continuum that almost disappeared in (III). The Na line was observed with two satellite diffuse bands representing Na-Ar complexes in (I) and (II), whereas in (III), only the line of sodium could be seen. Weak and diffuse emission lines from the Ar atom in the near-IR region were observed in (I) and (II).The proposed mechanism of bright CBL was based on the energy transfer from electron-excited homolytic cleavage products to the chromophore molecules generated during the collapse-rebound time line (∼8200 K and ∼1 ms of collapse time from model), which had accumulated inside the liquid and remained on the walls of cavity during the repetition of the collapse. A general mechanism for the bright CBL is broached.     

Ultraviolet-assisted synthesis of encapsulating adhesives and their application for lifetime improvement of organic light emitting diodes

The lifetimes of organic light emitting diodes (OLEDs) have been successfully enhanced with the modulation of LiF thickness and the utilization of encapsulating adhesives, which have been successfully and quickly synthesized with UV irradiation. Experimental results demonstrate that LiF and lab-made encapsulating adhesives can block the invasion of moisture as well as oxygen in the atmosphere into the OLEDs so that the lifetimes of devices with their encapsulation are 18-folds longer than those without encapsulation.     

Synthesis of 2,3-dimorpholino-6-aminoquinoxaline derivatives and application to a new intramolecular fluorescent probe

Two fluorescent monomers having a quinoxaline skeleton, N-(2,3-dimorpholinoquinoxalin-6-yl)acrylamide (QxA) and N-(1-(2,3-dimorpholinoquinoxalin-6-ylamino)prop-2-yl)methacrylamide (QxAlaMA), were synthesized. Thermo-responsive copolymers of N-isopropylacrylamide (NIPAM) and a small amount of a fluorescent monomer were synthesized and their fluorescence properties investigated. The fluorescent monomers showed intense solvatochromism in their fluorescence. The wavelength at the maximum fluorescence intensity of the QxAlaMA-labeled PNIPAM dramatically blue-shifted and the fluorescence intensity of the QxA-labeled PNIPAM significantly increased around the transition temperature. It was found that these fluorescent dyes can sense and report the thermo-responsive behavior of the PNIPAM in water. Both QxAlaMA and QxA were demonstrated to be applicable to new intramolecular fluorescent probes.