Cyclohexane transformations over metal oxide catalysts. 1. Effect of the nature of metal and support on the catalytic activity in cyclohexane ring opening

The activities of monometallic Pt-, Ru-, and Rh-containing catalysts supported on Al₂O₃, Al₂O₃—F, SiO₂, WO₃/ZrO₂, and La₂Î₃/ZrO₂, in cyclohexane ring opening to form n-hexane were studied. The most active catalyst is Rh/Al₂O₃. Cyclohexane hydrogenolysis to n-hexane also occurs over the Pt/Al_;>2O₃ and Pt/La₂Î₃/ZrO₂ catalysts. Ring opening over the Ru catalysts proceeds at significantly lower temperatures (210—230 °C) than over the Pt and Rh catalysts (350—400 °C), but the ruthenium systems are less selective for n-hexane formation than Rh/Al₂O₃ catalysts. The effects of acid-basic properties of the support and the reaction conditions on the activities of the catalytic systems in cyclohexane ring opening was studied.     

Transformation of n-hexane on Al2O3and SiO2supported Pt, Pt+Ga and Ir+Pt+Ga catalysts prepared by anchoring methods

Summary Transformation of n-hexane over Al₂O₃and SiO₂supported Pt, Pt+Ga and Ir+Pt+Ga catalysts was studied in a continuous-flow reactor operated under slug-pulse mode at 520°C. Bimetallic catalysts were prepared by introducing first Ga(OEt)₃and then diallylplatinum as precursor compounds. Iridium was then introduced viadecomposition of Ir₄(CO)₁₂adsorbed onto Pt+Ga catalysts. The addition of Ga to Pt/SiO₂catalyst decreased hydrogenation, aromatization and hydrogenolysis selectivity. Over Pt/Al₂O₃catalyst Ga increased hydrogenolysis selectivity and decreased isomerization and C₅-cyclization. The main effect of Ir was to increase hydrogenolysis selectivity and the stability of catalysts.</o:p>     

锶助剂对铂锡催化剂正丁烷脱氢催化性能的影响

负载型ＰｔＳｎ／Ａｌ２Ｏ３催化剂已广泛地应用于工业生产中［１］，人们正尝试着添加不同助剂以改变催化剂的反应性能。文献的工作主要集中在研究铂锡催化剂中添加助剂对载体表面酸性的调变作用。在烃类重整催化剂中，加入氟、氯等元素可增强载体的表面酸性［２］，提高...     

EU-1分子筛的合成及其在正己烷异构化反应中的催化性能

在不同硅铝比(n_SiO2/n_Al2O3)的合成凝胶(含纯硅凝胶)中引入晶种,合成了纯相的EU-1分子筛。研究了铝源、模板剂和晶种添加量对EU-1分子筛的结晶度、形貌尺寸等的影响;重点研究了不同硅铝比对样品结晶度、晶粒尺寸、酸性、比表面积和孔容等的影响。将合成结果绘制成了纯相EU-1分子筛的合成条件三元图,从三元图可看出,晶种法可显著扩大纯相EU-1分子筛的合成区域。将Pt/H-EU-1用于正己烷异构化反应,结果表明,该催化剂具有优异的正己烷异构化活性及稳定性,对异构烷烃有较高的选择性。     

n-Alkane isomerization on heteropolyacids

Acid-base properties of bulk 12-tungstophosphoric heteropolyacid (HPWA) and HPWA supported on alumina and fluorinated alumina were studied by DRIFT spectroscopy using adsorption of probe molecules. Catalytic properties of Pt-containing catalysts carried by these supports were studied inn-pentane isomerization. It was shown that the Pt/HPWA/Al₂O₃ system is almost inactive in isomerization as a result of the interaction of HPWA with basic sites of the alumina support. On the contrary, the presence of acidic sites in fluorinated alumina prevents HPWA destruction and favors the uniform distribution of HPWA on the support surface. As a result, enhancement of the activity and selectivity of the Pt/HPWA/Al₂O₃-F catalyst inn-pentane isomerization is observed. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1744–1750, October, 2000.     

Isomerization ofn-pentane andn-hexane on modified zeolites

The activity and selectivity of catalysts based on TsVM (an analog of ZSM-5), Beta, and La-H-Beta zoelites modified by Pt, Pt−Fe, and Pt−Ga were studied in the isomerization of C₅ and C₆ linear alkanes. The Pt/HTsVM, Pt/H-Beta, and Pt/La-H-Beta catalysts are efficient inn-pentane isomerization, whereas the Pt/H-Beta and Pt/La-H-Beta are most active inn-hexane isomerization. Nearly equilibirum isoparaffin yield at a selectivity of at least 95–96% is reached on these catalysts unlike other zeolite systems. The overall yield of 2,2-and 2,3-dimethylbutanes is 22 wt.%. The hexane isomers are not formed over the Pt/HTsVM catalyst due to the molecular-sieve properties of this type of zcolites. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya No. 11, pp. 1866–1869, November, 2000.     

A study on the reduction behavior of silica supported iron and platinum-iron catalysts

The reduction behavior of silica supported iron and platinum-iron catalysts were studied by combinedin situ temperature programmed reduction (TPR)-M?ssbauer Spectroscopy (MBS). The results indicated that the TPR profiles of the supported Fe catalysts were different from that of bulk α-Fe₂O₃. There existed an interaction between the Pt and Fe metals and the SiO₂ support for the Pt−Fe/SiO₂ catalyst. On the supported iron-containing catalysts, the Fe³⁺ species were highly dispersed on the SiO₂ supported before reduction. No Fe⁰ and Fe²⁺ in octahedral vacancy were found in the reduction of SiO₂ supported iron-containing catalysts. Addition of Pt to the Fe/SiO₂ catalyst could promote the reduction of the iron species.     

EU-1分子筛的合成及其在正己烷异构化反应中的催化性能

在不同硅铝比(nSiO₂/nAl₂O₃)的合成凝胶(含纯硅凝胶)中引入晶种,合成了纯相的EU-1分子筛。研究了铝源、模板剂和晶种添加量对EU-1分子筛的结晶度、形貌尺寸等的影响;重点研究了不同硅铝比对样品结晶度、晶粒尺寸、酸性、比表面积和孔容等的影响。将合成结果绘制成了纯相EU-1分子筛的合成条件三元图,从三元图可看出,晶种法可显著扩大纯相EU-1分子筛的合成区域。将Pt/H-EU-1用于正己烷异构化反应,结果表明,该催化剂具有优异的正己烷异构化活性及稳定性,对异构烷烃有较高的选择性。     

Hydroisomerization of n-heptane over bimetal-bearing H3PW12O40 catalysts supported on dealuminated USY zeolite

The bimetal-bearing (CePt or LaPt) 12-tungstophosphoric acid (H₃PW₁₂O₄₀ (PW)) catalysts supported on dealuminated USY zeolite (DUSY) were prepared by impregnation and characterized by XRD, BET, IR, and H₂-chemisorption. Their catalytic activities were tested in the hydroisomerization of n-heptane with a continuous atmospheric fixed-bed reactor. After the steam treatment combined with the acid leaching, as well as the supporting with PW and the bimetals, the DUSY support retains the Y zeolite porosity and the PW well keeps its Keggin structure in catalysts. The doping of Ce into the catalysts enhances the dispersion of Pt on the catalyst surface. The Pt-bearing PW catalysts doped with Ce or La, especially Ce, exhibit much higher catalytic activity and selectivity than the catalysts without dopants at lowered reaction temperatures. At the optimal reaction conditions, i.e., the reaction temperature of 250°C and WHSV of 1.4 h⁻¹, the catalyst with a Pt loading of 0.4%, PW loading of 10% and a molar ratio of Ce to Pt of 15:1 shows a conversion of n-heptane of 70.3% with a high selectivity for isomerization products of 94.1%. Supported by the Natural Science Foundation of China (Nos. 20306011 and 20476046), the Ph. D. Program Foundation of Chinese University (20040291002), and the Ph. D. innovation Program Foundation of Nanjing University of Technology (BSCX200506)     

Transformations of cyclohexane and benzene on the bimetallic Ru-Pt oxide catalysts

The bimetallic Ru-Pt/Al₂O₃ catalysts with an overall metal content of 1 wt. % and Pt: Ru weight ratios from 1: 3 to 3: 1 were studied. The catalytic activity for cyclohexane and benzene transformations, including hydrogenation, hydrogenolysis, and skeletal isomerization of the initial substrates and products of intermediate transformations, was studied at temperatures 180–350 °C and H₂ pressures from 1.0 to 5.0 MPa. The maximum yield of n-hexane from cyclohexane and benzene was obtained on the catalysts with a ruthenium content of 0.75–1.0%, being ∼29–30 wt.% at 40% selectivity. The selectivity to form n-hexane decreases with an increase in the cyclohexane conversion and is almost independent of the composition of the Ru-Pt system. On the catalysts under study, benzene is converted to the same products but at temperatures by 60 °C lower as compared to cyclohexane conversion. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 633–637, April, 2006.     

Hydroisomerization of benzene-containing gasoline fractions on a Pt/SO 42? -ZrO2-Al2O3 catalyst: II. Effect of chemical composition on acidic and hydrogenating and the occurrence of model isomerization reactions

The acidic and hydrogenating of Pt/SO₄²⁻-ZrO₂-Al₂O₃ samples containing from 18.8 to 67.8 wt % Al₂O₃ as a support constituent were studied by the IR spectroscopy of adsorbed CO and pyridine, and the model reactions of n-heptane and cyclohexane isomerization on these catalysts were examined. The total catalyst activity in the conversion of n-heptane decreased with the concentration of Al₂O₃; this manifested itself in an increase in the temperature of 50% n-heptane conversion from 112 to 266°C and in an increase in the selectivity of isomerization to 94.2%. In this case, the maximum yield of isoheptanes was 47.1 wt %, which was reached on a sample whose support contained 67.8 wt % Al₂O₃. A maximum yield (69.6 wt %) and selectivity (93.7%) for methylcyclopentane formation from cyclohexane were also reached on the above catalyst sample. This can be explained by lower concentrations of Lewis and Br?nsted acid sites in the Pt/SO₄²⁻-ZrO₂-Al₂O₃ system, as compared with those in Pt/SO₄²⁻-ZrO₂. The experimental results allowed us to make a preliminary conclusion that the Pt/SO₄²⁻-ZrO₂-Al₂O₃ catalyst whose support contains 67.8 wt % Al₂O₃ is promising for use in the selective hydroisomerization of benzene-containing gasoline fractions in the thermodynamically favorable process temperature range of 250–300°C.     

Catalytic Performance of Re/Ga2O3/WO3/ZrO2 Catalyst for n-Hexane Isomerization

A series of Re/Ga₂O₃/WO₃/ZrO₂ catalysts were prepared by the impregnation method. The crystalline structure, redox, and acid site distribution of the catalysts were characterized by X-ray powder diffraction, temperature-programmed reduction of H₂, and temperature-programmed desorption of NH₃. Their catalytic performance for n-hexane isomerization was studied. The results showed that the addition of Re greatly affected the redox properties and the acid site distribution of the catalysts. Owing to the presence of Re, n-hexane isomerization was catalyzed by metal and acid sites, and thus the conversion of n-hexane and the selectivity for 2,2-dimethylbutane were significantly increased. Under the conditions of 195 °C, 1.0 MPa, LHSV = 1.0 h⁻¹, and n(H₂)/n(C₆) = 2.0, the conversion of n-hexane over 1.0%Re/1.0%Ga₂O₃/WO₃/ZrO₂ is 84.8%, and the selectivities for 2,2-dimethylbutane, i-hexane, and cracking products (C_5-) are 20%, 97.7%, and 2.1%, respectively. The catalyst is stable during 150 h operation.     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比（n_Zr/n_Cd）的ZrCdO_x金属氧化物，并与水热法制备的不同硅铝比（n_SiO2/n_{Al2O3）的片状SAPO-18分子筛物理混合制得ZrCdOx/SAPO-18双功能催化剂，研究了其催化CO2加氢直接合成低碳烯烃性能。采用透射电子显微镜（TEM）、X射线衍射（XRD）、N2吸附-脱附、CO2程序升温脱附（CO2-TPD）、NH3程序升温脱附（NH3-TPD）和X射线光电子能谱（XPS）对催化剂进行了分析。与单一ZrO2相比，引入CdO使得ZrCdOx比表面积下降，当nZr/nCd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状，Zr与Cd之间较强的协同作用使得ZrCdOx氧化物产生了更多的氧空位，有利于CO2的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18（硅铝比0.1）的质量比、工艺反应温度、压力和空速对催化性能影响的考察，获得了最佳反应条件。研究还发现，当SAPO-18的硅铝比从0.1降为0.01时，Brø；nsted酸含量降低，产物中烯烃/烷烃物质的量之比从18.6提高至37.2，但副产物CO含量迅速增加，低碳烯烃时空收率明显下降。}     

Catalytically Promoted NOx Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.     

Propane combustion over supported Pt catalysts

We prepared Pt catalysts supported on various metal oxides, viz., ZrO₂, CeO₂, TiO₂, yttria-stabilized zirconia (YSZ), SiO₂, SiO₂–Al₂O₃, and γ-Al₂O₃, using an incipient wetness method and applied them to propane combustion. In the cases of ZrO₂-, CeO₂-, and TiO₂-supported Pt catalysts, supports with different surface areas were also used. The Pt dispersion in Pt catalysts supported on metal oxides increased with increasing surface area of the support for the same metal oxide. Pt catalysts on supports with lower surface areas (ZrO₂, CeO₂, and TiO₂) showed higher catalytic activities for propane combustion than did Pt catalysts on supports with higher surface areas. The catalytic activity decreased in the following order: Pt/ZrO₂ (2) > Pt/CeO₂ (9) > Pt/TiO₂ (1) = Pt/SiO₂ (350) > Pt/ZrO₂ (18) = Pt/YSZ > Pt/TiO₂ (330) > Pt/SiO₂–Al₂O₃ (350) > Pt/ZrO₂ (73) > Pt/γ-Al₂O₃ (180) > Pt/CeO₂ (160). The catalytic activity is inversely proportional to the amount of O₂ chemisorbed up to the reaction temperature. It can be concluded that metallic Pt is essential for propane combustion and is maintained for the Pt catalysts with large Pt metal particles, which can be prepared by using a support with a low surface area.     

Synthesis,characterization, and catalytic activity in the <Emphasis Type="Italic">n</Emphasis>-heptane conversion over Pt/In–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> sol–gel prepared catalysts

Platinum catalysts supported on indium-doped alumina were prepared by the sol–gel method. The method allows the incorporation of In³⁺ in the alumina network. The indium-doped alumina supports showed narrow pore size distribution (5.4–4.0 nm) and high specific surface areas (258–280 m²/g). The ²⁷Al NMR-MAS spectroscopy identified aluminum in tetrahedral, pentahedral, and octahedral coordination; however, the intensity of the signal assigned to aluminum in pentahedral coordination diminishes with the increase of the content of indium. Total acidity determined by ammonia thermodesorption diminishes strongly in Pt/In–Al₂O₃ catalysts, suggesting a selective deposit of platinum over the acid sites of the support. The effect of the support in the platinum catalytic activity was evaluated in the n-heptane dehydrocyclization reaction. The selectivity patterns for such reaction were modified substantially in the doped Pt/In–Al₂O₃ catalysts, in comparison with the Pt-In/Al₂O₃–I coimpregnated reference catalyst. As an important result, the formation of benzene was suppressed totally over the indium-doped alumina sol–gel supports with a high content (3 wt%) of indium.     

不同硅铝比Cu-ZSM-5纳米片上N2O催化分解

以双季铵盐表面活性剂为模板剂,水热条件下合成了硅铝比(nSi/nAl)为18、26和95的ZSM-5沸石纳米片,采用离子交换方法制备了铜改性的ZSM-5纳米片样品,并测试了其催化分解N_2O性能。结合X射线衍射(XRD)、N_2吸附/脱附、X射线荧光光谱(XRF)、扫描电镜(SEM)、透射电镜(TEM)、氢气程序升温还原(H_2-TPR)、氧气程序升温脱附(O_2-TPD)和原位红外漫反射光谱(CODRIFT)等表征结果 ,探讨了沸石硅铝比对于催化剂N_2O分解性能的影响及其原因。结果表明,ZSM-5纳米片硅铝比越低,CuZSM-5纳米片催化剂的活性越高。催化活性的提高归因于低硅铝比催化剂上Cu~+活性物种可还原性的增强和吸附氧脱附能力的提高。     

Selective hydrogenation of o-chloronitrobenzene (o-CNB) over supported Pt and Pd catalysts obtained by laser vaporization deposition of bulk metals

Carbon nanotubes (CNTs), γ-alumina (γ-Al₂O₃) and silica (SiO₂) supported Pt and Pd catalysts were produced by laser vaporization deposition of respective bulk metals. The catalysts were characterized by inductive coupled plasma emission spectrometer (ICP), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The catalytic properties of the catalysts were investigated in the liquid phase hydrogenation of o-chloronitrobenzene (o-CNB) to o-chloroaniline (o-CAN) under 333 K and 1.0 MPa hydrogen pressure. The results show that the catalytic properties are greatly affected by the supports. Pt/CNTs catalyst exhibits the best catalytic performance among the Pt-based catalysts, producing o-CAN with 99.6% selectivity at complete conversion. Pd/CNTs catalyst exhibits the best catalytic performance among the Pd-based catalysts, giving o-CAN with 95.2% selectivity at complete conversion. For Pt-based catalysts, geometric effect and the textures and properties of the supports play important roles on catalytic properties. On the other hand, geometric effect, electronic effect and the textures and properties of the supports simultaneously influence the catalytic properties of the Pd-based catalysts. In addition, hydrogenolysis of the C–Cl bond can be well inhibited over all catalysts prepared by laser vaporization deposition.     

Nonoxidative conversion of methane and <Emphasis Type="Italic">n</Emphasis>-pentane over a platinum/alumina catalyst

Methane adsorption on the Pt–H/Al₂O₃ and Pt/Al₂O₃ catalysts begins at Т = 475°C and is accompanied by the appearance of hydrogen in the reaction medium. At a higher temperature is raised to 550°C, the amount of adsorbed hydrogen increases to 1.1 and 0.8 mol/(mol Pt), respectively. According to the calculated degree of methane dehydrogenation on platinum sites at Т = 550°C, the Н/C ratio is 1.3 (at/at) for the Pt–H/Al₂O₃ catalyst and 1.5 (at/at) for the Pt/Al₂O₃ catalyst. The introduction of n-pentane into the reaction medium increases the yield of aromatic hydrocarbons (benzene and toluene) by a factor of 8.8 over the arene yield observed in individual n-pentane conversion. A mass spectrometric analysis of the arenes obtained with the Pt/Al₂O₃ catalyst has demonstrated that 37.5% of the adsorbed methane is involved in the methane–n-pentane coaromatization yielding benzene and toluene.     

Production of 1,3-Butadiene From C4 Raffinate-3 Through Oxidative Dehydrogenation of n-Butene Over Bismuth Molybdate Catalysts

Recent progress on the bismuth molybdate catalysts for oxidative dehydrogenation of n-butene to 1,3-butadiene was reported in this review. A number of bismuth molybdate catalysts, including pure bismuth molybdates (α-Bi₂Mo₃O₁₂, β-Bi₂Mo₂O₉, and γ-Bi₂MoO₆) and multicomponent bismuth molybdates, were prepared by a co-precipitation method for use in the production of 1,3-butadiene from C₄ raffinate-3 through oxidative dehydrogenation of n-butene. It was observed that multicomponent bismuth molybdate catalyst was more efficient than pure bismuth molybdate catalyst in the oxidative dehydrogenation of n-butene. Various experimental measurements such as temperature-programmed reoxidation, X-ray photoelectron spectroscopy, and O₂-temperature-programmed desorption analyses were carried out to elucidate the different catalytic activity of bismuth molybdate catalysts. It was revealed that a bismuth molybdate catalyst with a higher oxygen mobility showed a better catalytic performance in terms of conversion of n-butene and yield for 1,3-butadiene. We have successfully demonstrated from experimental findings that oxygen mobility of bismuth molybdate catalyst played a key role in determining the catalytic performance in the oxidative dehydrogenation of n-butene to 1,3-butadiene.