Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

[4+3] Cycloadditions of some allylic dioxolanes

Four allylic dioxolanes were prepared and reacted with several dienes in the presence of Lewis acids, affording [4+3] cycloadducts. The reaction could be conducted with catalytic amounts of Lewis acid. The use of a chiral Lewis acid gave a cycloadduct with only a low enantiomeric excess.     

Transition metal-catalyzed intermolecular [5+2] and [5+2+1] cycloadditions of allenes and vinylcyclopropanes

Initial examples of the intermolecular Rh(I)-catalyzed [5+2] cycloaddition reaction of bifunctional allenes and vinylcyclopropanes are described. The reactions proceed with facility and in yields of up to 99% with a variety of alkyne-, ester-, styrene-, or cyano-substituents on the allene to afford the corresponding cycloadducts. In the presence of CO, the reaction proceeds to an eight-membered ring cycloadduct and its transannularly closed product, providing the first example of a three-component [5+2+1] cycloaddition with allenes.     

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran the benzene ring as dienophile in a [4+2] cycloaddition reaction

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran resulted in the formation of three 1:1 cycloadducts, 1, 2, and 3, and a 1:2 cycloadduct, 4. Single crystal x-ray analysis established 3 to be a cage compound formed by an unprecedented [4+2] cycloaddition reaction of 1 in which the double bond of the benzene moiety acted as the dienophile.     

Bifunctional N‐Heterocyclic Carbene Catalyzed [3+4] Annulation of Enals and Aurones

Bifunctional N‐heterocyclic carbenes with a free hydroxy group are demonstrated as efficient catalysts for the [3+4] annulation of enals with aurones to give the corresponding benzofuran‐fused ε‐lactones in good yields with good diastereoselectivities and excellent enantioselectivities. Control experiments reveal that the [3+4] cycloadducts are kinetically favored and could be transformed to the thermodynamically favored [3+2] cycloadducts with a non‐bifunctional NHC catalyst.     

Synthesis and [2+4]cycloadditions of two 1-aza-1,3-butadiene-1-carbonitriles

3-Methyl- and 3-ethyl-1-aza-1,3-butadiene-1-carbonitriles were synthesized by reaction of the corresponding 3-alkylacroleins with bis(trimethylsilyl)-carbodiimide using titanium tetrachloride as catalyst. They were highly reactive and difficult to purify rigorously. Attempted anionic polymerizations gave only oligomers of molecular weight ∼500 Da. These 3-alkyl-azadienecarbonitriles cycloadded to the electron-rich olefins iso-butyl vinyl ether and p-methoxystyrene to give [2+4] cycloadducts with moderate yields.     

4+3] versus [4+2] mechanisms in the dimerization of 2-boryl-1,3-butadienes. A theoretical and experimental study

The thermal dimerization of 2-boryl-1,3-butadienes and the scope of this reaction to prepare six-membered rings difficult to synthesize by other methodologies have been studied. In addition, the nature of this dimerization has been studied theoretically. It has been found that the reaction coordinate associated with the formation of the cycloadduct of lowest energy has significant [4+3] character. This behavior is caused by the favorable carbon-carbon overlap and the large values of the corresponding resonance integrals. However, beyond the transition structure, the [4+2] pathway becomes the preferred one thus leading to the exclusive formation of the [4+2] cycloadduct. Aside from this effect, donating groups at the boryl moiety favor the [4+2] mechanism.     

Complete and remarkable reversal of chemoselectivity in [4 + 2] cycloadditions involving electron-poor indoles as dienophiles. Diels-Alder versus hetero-Diels-Alder processes

The reaction between indole-3-carboxaldehyde 1a or indole-3-glyoxalate 1b and 2,3-dimethylbutadiene under thermal activation leads exclusively to the Diels-Alder cycloadducts resulting from the participation of the indole 2,3-carbon-carbon double bond. The concomitant use of zinc chloride and high pressure (16 kbar) induces the primary cycloadduct to react further, and biscycloadducts 11 and 12 are now isolated in high yields, the result of two consecutive [4 + 2] processes on, first, the indole 2,3 C=C bond and, second, the 3-carbonyl unit. The possibility of using two different dienes in a tandem, sequential process is demonstrated by the preparation of tetracycle 13. Interactions between the carbonyl dienophile and Danishefsky diene yield exclusively yet another type of product, namely the gamma-dihydropyranones arising from the sequential [4 + 2] heterocycloaddition, hydrolysis of the silyl enol ether, and loss of methanol. Isolation of the Mukaiyama-type adduct 16 indicates that a stepwise mechanism may be involved, at least under zinc chloride catalysis. N,N-Disubstituted indole-3-glyoxamides undergo the expected, usual Diels-Alder process, with the 2,3 C=C bond acting as dienophile, and cycloadducts of the type 3 are obtained in high yields, regardless of the mode of activation. Remarkably, however, N-monosubstituted indole-3-glyoxamides react almost exclusively as heterodienophiles, the 3-carbonyl unit being now the preferred site of reactivity, and gamma-dihydropyranones of the type 6 are isolated in yields ranging from 72 to 92%. Conformational analysis of the Diels-Alder adducts based on both (1)H NMR spectrometry and X-ray diffraction data indicates that the newly created cyclohexene and cyclohexanone rings adopt a pseudoboat conformation.     

Reaction of ene-bis(phosphinylallenes): [2+2] versus [4+2] cycloaddition

Reaction of ene-bis(phosphinylallenes), derived from ene-bis(propargyl alcohols) and chlorodiphenylphosphine, was investigated. Benzene-bridged bis(phosphinylallenes) exclusively gave intramolecular [2+2] cycloadducts in the presence of dimethyl fumarate in sharp contrast to the reaction of benzene-bridged bis(sulfinylallenes), which gave the corresponding [4+2] cycloadducts. On the other hand, substituted ethylene- or five-membered heterocycle-bridged bis(phosphinylallenes) provided [4+2] cycloadducts. Reaction of benzene-bridged diallene bearing both a sulfinyl group and a phosphinyl group on the two allenyl groups was also described.     

Novel [4 + 2]-cycloaddition of 1-phenyl-1-benzothiophenium salts with dienes. Experimental evidence for a lack of aromaticity in the thiophene ring

The [4 + 2]-cycloaddition reaction of 1-phenyl-1-benzothiophenium triflates has been conducted for the first time. [4 + 2]-Cycloaddition with dienes such as cyclopentadiene and 1,3-diphenylisobenzofuran occurs successfully to give cycloadducts. This result indicates that the C=C bond of the thiophene ring acts as a 2pi electron component in the cycloaddition reaction. Cycloadducts were formed in high yields with high stereoselectivity. However, the cycloaddition with other less reactive dienes such as 2,3-dimethyl-1,3-butadiene did not take place. The structure and stereochemistry of cycloadduct 2a were analyzed by NMR techniques. Furthermore, reaction of the cycloadducts with sodium methoxide in methanol gave the ring-opened products in high yields.     

Bay-area selective thermal [4+2] and [4+4] cycloaddition reactions of triply linked ZnII diporphyrin with o-xylylene

A triply linked ZnII diporphyrin underwent site-selective cycloaddition reactions with thermally generated o-xylylene to provide a triply linked porphyrin-chlorin hybrid and a triply linked chlorin dimer in moderate yields. The former product is a symmetry-allowed [4+2] cycloadduct, while the latter is a symmetry-forbidden [4+4] cycloadduct. Oxidation of the latter product with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) provided a triply linked diporphyrin fused with a benzocyclooctatriene segment. This oxidized product and above [4+2] cycloadduct were structurally characterized by single crystal X-ray diffraction analysis. The observed site-selectivity is considered to arise from the large MO coefficients at the bay-area in the LUMO of the triply linked diporphyrin. The anomalous thermal [4+4] cycloaddition may be ascribed to the highly conjugated and quite perturbed electronic properties of triply linked ZnII diporphyrin.     

Intramolecular pyridone/enyne photocycloaddition: partitioning of the [4 + 4] and [2 + 2] pathways

Intramolecular photocycloaddition (>290 nm) between a 1,3-enyne and a 2-pyridone is far more selective than the intermolecular version; a three-atom linkage both controls regiochemistry and separates the [2 + 2] and [4 + 4] pathways. All four head-to-head, head-to-tail, tail-to-head, and tail-to-tail tetherings have been investigated. Linkage via the ene of the enyne leads to [2 + 2] products regardless of alkene geometry, whereas linkage through the yne results in [4 + 4] cycloadducts. The bridged 1,2,5-cyclooctatriene products of [4 + 4] cycloaddition are unstable and undergo a subsequent [2 + 2] dimerization reaction.     

Three-component cycloadditions: the first transition metal-catalyzed [5+2+1] cycloaddition reactions

Prompted by our studies of transition metal-catalyzed [4+4], [4+2], [5+2], and [6+2] cycloadditions and by the view that these two-component reactions could be intercepted by a third component of one or more atoms, a new three-component transition metal-catalyzed cycloaddition is described. This new [5+2+1] cycloaddition proceeds in good to excellent yield and with high or complete regioselectivity with a variety of carbonyl-substituted alkynes to give bicyclo[3.3.0]octenone adducts, resulting from transannular closure of the intermediate eight-membered-ring cycloadduct. Effects of concentration, temperature, pressure, and catalyst loading on the efficiency of the reaction are discussed. This process provides access to complex building blocks for synthesis based on simple, readily available components.     

Diastereoselectivity-Switchable Gold-Catalyzed Formal [3+2]-Cycloadditions of N-2,2,2-Trifluoroethylisatin Ketimines with Yne−Enones

The unexpected gold-catalyzed formal [3+2]-cycloaddition of N-2,2,2-trifluoroethylisatin ketimines with 2-(1-Alkynyl)-2-alken-1-ones is reported. Both diastereomers of the corresponding cycloadducts were formed in moderate to excellent yields with excellent diastereoselectivities by switching the catalytic system from mono-gold to gold/silver bimetallic catalytic system. The practicality of this protocol is demonstrated by scale-up reaction and the transformations of the cycloadduct.     

Novel [4+6]π cycloadduct from frontier-controlled pericyclic reaction of 2,5-dimethoxycarbonyl-3,4-diphenylcyclopentadienone with cyclooctatetraene

Treatment of 2,5-dimethoxycarbonyl-3,4-diphenylcyclopentadienone with an excess of cyclooctatetraene gives the novel exo[4+6]π cycloadduct together with the endo[2+4]π and bis-Diels-Alder cycloadducts. The CNDO/2 MO calculation indicates that HOMO(COT)-LUMO(cyclopentadienone) interaction will be more important than the other.     

Gas-phase polar [4+ + 2] cycloaddition with ethyl vinyl ether: a structurally diagnostic ion-molecule reaction for 2-azabutadienyl cations

The intrinsic reactivity of eight gaseous, mass-selected 2-azabutadienyl cations toward polar [4(+) + 2] cycloaddition with ethyl vinyl ether has been investigated by pentaquadrupole mass spectrometric experiments. Cycloaddition occurs readily for all the ions and, with the only exception of those from the N-acyl 2-azabutadienyl cations (N-acyliminium ions), the cycloadducts are found to dissociate readily upon collision activation (CID) both by retro-Diels-Alder reaction and by a characteristic loss of an ethanol (46u) neutral molecule. Ethanol loss from the intact polar [4(+) + 2] cycloadduct functions therefore as a structurally diagnostic test: 72 u neutral gain followed by 46 u neutral loss, i.e., as a combined ion-molecule reaction plus CID 'signature' for N-H, N-alkyl and N-aryl 2-azabutadienyl cations. The two N-acyliminium ions tested are exceptional as they form intact cycloadducts with ethyl vinyl ether which dissociate exclusively by the retro-Diels-Alder pathway.     

Formal synthesis of aspidosperma alkaloids via the intramolecular [3 + 2] cycloaddition of 2-azapentdienyllithiums

[reaction: see text] A formal synthesis of the Aspidosperma alkaloids aspidospermidine, aspidospermine, and quebrachamine is reported through an efficient preparation of Stork's penultimate intermediate. The key step of the sequence involved an intramolecular [3 + 2] cycloaddition of the 2-azapentadienyllithium 21 formed in situ from the corresponding imine 1, which after N-alkylation of the resulting cycloadduct provided 2 in excellent yield. The synthesis represents a new disconnection of the classical tricyclic ketone used for appendage of the requisite indole.     

AuBr(3)-catalyzed [4 + 2] benzannulation between an enynal unit and enol

The reaction of enynals 1, including o-alkynylbenzaldehydes, and carbonyl compounds 2 in the presence of a catalytic amount of AuBr3 in 1,4-dioxane at 100 degrees C gave the functionalized aromatic compounds 3 in high yields. The AuBr3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuBr3, the formation of a pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the reverse electron demand-type Diels-Alder addition of the enols, derived from 2, to the auric ate complex, and subsequent dehydration and bond rearrangement. Similarly, the AuBr3-catalyzed reactions of 1 with acetal compounds afforded the corresponding aromatic compounds in good yields.     

Intramolecular photochemical dioxenone-alkene [2 + 2] cycloadditions as an approach to the bicyclo[2.1.1]hexane moiety of solanoeclepin A.

A synthesis of the bicyclo[2.1.1]hexane substructure of solanoeclepin A (1), the most active natural hatching agent of potato cyst nematodes, was approached via an intramolecular [2 + 2] photocycloaddition. Aldehyde 12 containing the dioxenone chromophore served as a useful starting material, allowing the synthesis of a variety of photocycloaddition substrates via Grignard addition or via a Nozaki-Hiyama-Kishi reaction. Photolysis of the unsubstituted alkene 14 led to the expected crossed cycloadduct bicyclo[2.1.1]hexane 15 according to the so-called rule of five. However, several functionalized alkenes 18, 20, and 31 exhibited a complete reversal of cycloaddition regioselectivity, providing straight cycloadducts bicyclo[2.2.0]hexanes 21-26 and 4, respectively. Their structures were proved by a combination of extensive NMR measurements, X-ray analyses, and subsequent retro-aldol reactions. The latter de Mayo process allowed the formation of spiro-[3.5]nonane 35 and spiro[3.4]octane 36 as well as the cyclobutanes 37 and 38. Finally, the cyclization of the more rigid lactone precursor 28 occurred in high yield in the desired fashion with complete regio- and stereoselectivity to give 3 containing the core bicyclo[2.1.1]hexane skeleton of the natural product.     

Heteropolyacid–silica mediated [3+2] cycloaddition of azomethine ylides—a facile multicomponent one-pot synthesis of novel dispiroheterocycles

An efficient synthesis of dispiroindenoquinoxaline pyrrolizidine derivatives has been expediently accomplished by a one-pot four component 1,3-dipolar cycloaddition reaction. High regioselectivity was achieved using heteropolyacid H₄[Si(W₃O₁₀)₃]–silica as a catalyst. X-ray diffraction studies of one of the cycloadducts proved the structure and regiochemistry of the cycloadduct.