Development of Gas-Particle Euler-Euler LES Approach: A Priori Analysis of Particle Sub-Grid Models in Homogeneous Isotropic Turbulence

A new large eddy simulation (LES) approach for particle-laden turbulent flows in the framework of the Eulerian formalism for inertial particle statistical modelling is developed. Local instantaneous Eulerian equations for the particle cloud are first written using the mesoscopic Eulerian formalism (MEF) proposed by Février et al. (J Fluid Mech 533:1–46, 2005), which accounts for the contribution of an uncorrelated velocity component for inertial particles with relaxation time larger than the Kolmogorov time scale. Second, particle LES equations are obtained by volume filtering the mesoscopic Eulerian ones. In such an approach, the particulate flow at larger scales than the filter width is recovered while sub-grid effects need to be modelled. Particle eddy-viscosity, scale similarity and mixed sub-grid stress (SGS) models derived from fluid compressible turbulence SGS models are presented. Evaluation of such models is performed using three sets of particle Lagrangian results computed from discrete particle simulation (DPS) coupled with fluid direct numerical simulation (DNS) of homogeneous isotropic decaying turbulence. The two phase flow regime corresponds to the dilute one where two-way coupling and inter-particle collisions are not considered. The different particle Stokes number (based on Kolmogorov time scale) are initially equal to 1, 2.2 and 5.1. The mesoscopic field properties are analysed in detail by considering the particle velocity probability function (PDF), correlated velocity power spectra and random uncorrelated velocity moments. The mesoscopic fields measured from DPS+DNS are then filtered to obtain large scale fields. A priori evaluation of particle sub-grid stress models gives comparable agreement than for fluid compressible turbulence models. It has been found that the standard Smagorinsky eddy-viscosity model exhibits the smaller correlation coefficients, the scale similarity model shows very good correlation coefficient but strongly underestimates the sub-grid dissipation and the mixed model is on the whole superior to pure eddy-viscosity model.     

基于人工神经网络的亚格子应力建模

亚格子(SGS)应力建模在湍流大涡模拟(LES)中有着极为重要的作用. 传统亚格子应力模型存在相对误差较大、耗散过强等问题. 近年来, 计算机技术的发展使得人工神经网络(ANN)等机器学习方法逐渐成为亚格子应力建模型的新研究范式. 本文着重考虑滤波宽度及雷诺数影响, 在不可压缩槽道湍流中建立了亚格子应力的ANN模型. 该模型以滤波后的直接数值模拟(fDNS)流场物理量及滤波尺度为输入信息, 相应滤波尺度下的亚格子应力为输出量. 通过对不同滤波尺度及不同雷诺数数据的训练, ANN模型能够给出与直接数值模拟(DNS)高度吻合的亚格子应力. 此外, 模型在亚格子耗散等非ANN建模量上也有着优异的预测性能, 与基于DNS获得的对应物理量的相关系数大都在0.9以上, 较梯度模型及Smagorinsky模型有明显提升. 在后验测试中, ANN模型对流向平均速度剖面的预测同样优于梯度模型、Smagorinsky模型及隐式大涡模拟(ILES)等传统LES模型. 在脉动速度均方根预测方面, 除了某些法向位置外ANN模型的性能整体上相对其他3个模型有所提升. 然而, 随着网格尺度的增大ANN模型预测的结果与fDNS结果的偏差逐渐增大. 总之, ANN方法在发展高精度亚格子应力模型上具有很大的潜力.      

基于全局动态Vreman模型的复杂非定常湍流的大涡模拟

在湍流数值模拟方法中,大涡模拟方法可以提供丰富的大涡旋信息,已逐渐成为复杂湍流问题数值研究的重要方法。而大涡模拟中,最重要的一环是尽量准确地构建能反映流场物理本质特征的亚格子应力模型。基于该思想,将一种新型的大涡模拟亚格子应力模型-Vreman亚格子应力模型用于高雷诺数三维后台阶流动的求解,计算结果与实验结果进行对比分析结果较吻合,验证了该模型的可靠性。这是对该模型用于无任何均匀流动方向的高雷诺数复杂湍流非定常流动的首次检验,计算结果优于基于传统的Smagorinsky涡粘性的动态亚格子模型。     

Subgrid-scale contributions to Lagrangian time correlations in isotropic turbulence

The application of large-eddy simulation （LES） to particle-laden turbulence raises such a fundamental question as whether the LES with a subgrid scale （SGS） model can correctly predict Lagrangian time correlations （LTCs）. Most of the currently existing SGS models are constructed based on the energy budget equations. Therefore, they are able to correctly predict energy spectra, but they may not ensure the correct prediction on the LTCs. Previous researches investigated the effect of the SGS modeling on the Eulerian time correlations. This paper is devoted to study the LTCs in LES. A direct numerical simulation （DNS） and the LES with a spectral eddy viscosity model are performed for isotropic turbulence and the LTCs are calculated using the passive vector method. Both a priori and a posteriori tests are carried out. It is observed that the subgrid;scale contributions to the LTCs cannot be simply ignored and the LES overpredicts the LTCs than the DNS. It is concluded from the straining hypothesis that an accurate prediction of enstrophy spectra is most critical to the prediction of the LTCs.     

Spectral-Dynamic Model for Large-Eddy Simulations of Turbulent Rotating Channel Flow

A new subgrid-scale model called the spectral-dynamic model is proposed. It consists of a refinement of spectral eddy-viscosity models taking into account nondeveloped turbulence in the subgrid-scales. The proposed correction, which is derived from eddy-damped quasi-normal Markovian statistical theory, is based on an adjustment of the turbulent eddy-viscosity coefficient to the deviation of the spectral slope (at small scales) with respect to the standard Kolmogorov law. The spectral-dynamic model is applied to large eddy simulation (LES) of rotating and nonrotating turbulent plane channel flows. It is shown that the proposed refinement allows for clear improvement of the statistical predictions due to a correct prediction of the near-wall behavior. Cases of rotating and nonrotating low (DNS) and high Reynolds (LES) numbers are then compared. It is shown that the principal structural features of the rotating turbulent channel flow are reproduced by the LES, such as the presence of the near-zero mean absolute vorticity region, the modification of the anisotropic character of the flow (with respect to the nonrotating case), the enhancement of flow organization, and the inhibition of the high- and low-speed streaks near the anticyclonic wall. Only a moderate Reynolds number dependence is exhibited, resulting in a more unstable character of the longitudinal large-scale roll cells at high Reynolds number, and a slight increase of the laminarization tendency on the cyclonic side of the channel. Received 16 October 1997 and accepted 1 October 1998     

基于人工神经网络的湍流大涡模拟方法

大涡模拟方法(LES)是研究复杂湍流问题的重要工具,在航空航天、湍流燃烧、气动声学、大气边界层等众多工程领域中具有广泛的应用前景.大涡模拟方法采用粗网格计算大尺度上的湍流结构,并用亚格子(SGS)模型近似表达滤波尺度以下的流动结构对大尺度流场的作用.传统的亚格子模型由于只利用了单点流场信息和简单的函数关系,在先验验证中相对误差较大, 在后验验证中耗散过强. 近几年来,机器学习方法在湍流建模问题中得到了越来越多的应用.本文介绍了基于人工神经网络(ANN)的湍流亚格子模型的最新进展.详细地讨论了人工神经网络混合模型、空间人工神经网络模型和反卷积人工神经网络模型的构造方法.借助于人工神经网络强大的数据插值能力,新的亚格子模型的先验精度和后验精度均有显著提升. 在先验验证中,新模型所预测的亚格子应力的相关系数超过了0.99,在预测精度上远高于传统的大涡模拟模型. 在后验验证中,新模型对各类湍流统计量和瞬态流动结构的预测都优于隐式大涡模拟方法、动态Smagorinsky模型、动态混合模型等传统模型.因此, 人工神经网络方法在发展复杂湍流的先进大涡模拟模型中具有很大的潜力.      

旋转圆管湍流的大涡模拟数值研究

采用大涡模拟（LES）方法,并结合动力学亚格子尺度应力（SGS）模型,通过数值求解柱坐标系下的滤波Navier-Stokes方程,研究了绕管轴旋转圆管内的湍流流动特性.为验证计算的可靠性,以及动力学SGS模型对于旋转湍流的适用性,将大涡模拟计算所得的结果,与相应的直接模拟（DNS）结果和实验数据进行了对比验证,吻合良好.进一步对旋转圆管湍流的物理机理进行了探讨,研究了湍流特性随旋转速率的变化规律.当旋转速率增加时,湍流流动有层流化的发展趋势.基于湍动能变化的关系,分析了旋转效应对湍流脉动生成的抑制作用.     

Simulating turbulence in complex geometries

We first review the state-of-the art in direct numerical simulation and present a new class of spectral methods on unstructured grids for handling complex-geometry domains. Subsequently, we concentrate on the classical problem of the turbulent wake behind a circular cylinder and compare the accuracy of spectral DNS versus other LES results available in the literature. We find that DNS provides consistent agreement with the experimental results, but that LES predictions are inconsistent and depend strongly on the interaction between numerical discretization and the subgrid model. We also demonstrate via a simple vorticity-based analysis of the turbulent near-wake that eddy-viscosity models are inappropriate for sudgrid modeling. In contrast, preliminary a priori tests suggest that scale-similarity models may be a good candidate. We close the paper by forecasting the use of dynamic DNS and comment on its role in simulating turbulence in complex geometries.     

Study of numerical errors in direct numerical simulation and large eddy simulation

By comparing the energy spectrum and total kinetic energy, the effects of numerical errors (which arise from aliasing and discretization errors), subgrid-scale (SGS) models, and their interactions on direct numerical simulation (DNS) and large eddy simulation (LES) are investigated. The decaying isotropic turbulence is chosen as the test case. To simulate complex geometries, both the spectral method and Pade compact difference schemes are studied. The truncated Navier-Stokes (TNS) equation model with Pade discrete filter is adopted as the SGS model. It is found that the discretization error plays a key role in DNS. Low order difference schemes may be unsuitable. However, for LES, it is found that the SGS model can represent the effect of small scales to large scales and dump the numerical errors. Therefore, reasonable results can also be obtained with a low order discretization scheme.     

Subgrid Scale Modeling in Large-Eddy Simulation of Turbulent Combustion Using Premixed Flamelet Chemistry

Large-eddy simulation (LES) of turbulent combustion with premixed flamelets is investigated in this paper. The approach solves the filtered Navier–Stokes equations supplemented with two transport equations, one for the mixture fraction and another for a progress variable. The LES premixed flamelet approach is tested for two flows: a premixed preheated Bunsen flame and a partially premixed diffusion flame (Sandia Flame D). In the first case, we compare the LES with a direct numerical simulation (DNS). Four non-trivial models for the chemical source term are considered for the Bunsen flame: the standard presumed beta-pdf model, and three new propositions (simpler than the beta-pdf model): the filtered flamelet model, the shift-filter model and the shift-inversion model. A priori and a posteriori tests are performed for these subgrid reaction models. In the present preheated Bunsen flame, the filtered flamelet model gives the best results in a priori tests. The LES tests for the Bunsen flame are limited to a case in which the filter width is only slightly larger than the flame thickness. According to the a posteriori tests the three models (beta-pdf, filtered flamelet and shift-inversion) show more or less the same results as the trivial model, in which subgrid reaction effects are ignored, while the shift-filter model leads to worse results. Since LES needs to resolve the large turbulent eddies, the LES filter width is bounded by a maximum. For the present Bunsen flame this means that the filter width should be of the order of the flame thickness or smaller. In this regime, the effects of subgrid reaction and subgrid flame wrinkling turn out to be quite modest. The LES-results of the second case (Sandia Flame D) are compared to experimental data. Satisfactory agreement is obtained for the main species. Comparison is made between different eddy-viscosity models for the subgrid turbulence, and the Smagorinsky eddy-viscosity is found to give worse results than eddy-viscosities that are not dominated by the mean shear. Paper presented on the Eccomas Thematic Conference Computational Combustion 2007, submitted for a special issue of Flow, Turbulence and Combustion.     

Large-eddy simulation of stratified channel flow

An investigation of large-eddy simulation (LES) for turbulent channel flow with buoyancy effects was performed by solving the resolved incompressible Navier-Stokes equations under the Boussinesq approximation. The Smagorinsky eddy-viscosity model and Yoshizawa eddy-viscosity model were used to describe the unresolved subgrid scale (SGS) fluctuations respectively. After some numerical testing, the latter was further simplified so that it can be used in the dynamic model closure. A LES code was developed for parallel computations by using the parallel technique, and was run on the Dawn-1000 parallel computer. To demonstrate the viability and accuracy of the code, our results are compared with and found in good agreement with available LES results. The project supported by the National Natural Science Foundation of China and by the Youngster Funding of Academia Sinica     

An improved anisotropy-resolving subgrid-scale model for flows in laminar–turbulent transition region

Some types of mixed subgrid-scale (SGS) models combining an isotropic eddy-viscosity model and a scale-similarity model can be used to effectively improve the accuracy of large eddy simulation (LES) in predicting wall turbulence. Abe (2013) has recently proposed a stabilized mixed model that maintains its computational stability through a unique procedure that prevents the energy transfer between the grid-scale (GS) and SGS components induced by the scale-similarity term. At the same time, since this model can successfully predict the anisotropy of the SGS stress, the predictive performance, particularly at coarse grid resolutions, is remarkably improved in comparison with other mixed models. However, since the stabilized anisotropy-resolving SGS model includes a transport equation of the SGS turbulence energy, k_SGS, containing a production term proportional to the square root of k_SGS, its applicability to flows with both laminar and turbulent regions is not so high. This is because such a production term causes k_SGS to self-reproduce. Consequently, the laminar–turbulent transition region predicted by this model depends on the inflow or initial condition of k_SGS. To resolve these issues, in the present study, the mixed-timescale (MTS) SGS model proposed by Inagaki et al. (2005) is introduced into the stabilized mixed model as the isotropic eddy-viscosity part and the production term in the k_SGS transport equation. In the MTS model, the SGS turbulence energy, k_es, estimated by filtering the instantaneous flow field is used. Since the k_es approaches zero by itself in the laminar flow region, the self-reproduction property brought about by using the conventional k_SGS transport equation model is eliminated in this modified model. Therefore, this modification is expected to enhance the applicability of the model to flows with both laminar and turbulent regions. The model performance is tested in plane channel flows with different Reynolds numbers and in a backward-facing step flow. The results demonstrate that the proposed model successfully predicts a parabolic velocity profile under laminar flow conditions and reduces the dependence on the grid resolution to the same degree as the unmodified model by Abe (2013) for turbulent flow conditions. Moreover, it is shown that the present model is effective at transitional Reynolds numbers. Furthermore, the present model successfully provides accurate results for the backward-facing step flow with various grid resolutions. Thus, the proposed model is considered to be a refined anisotropy-resolving SGS model applicable to laminar, transitional, and turbulent flows.     

Balance equation of the generalised sub-grid scale (SGS) turbulent kinetic energy in a new tensorial dynamic mixed SGS model

A new dynamic model is proposed in which the eddy viscosity is defined as a symmetric second rank tensor, proportional to the product of a turbulent length scale with an ellipsoid of turbulent velocity scales. The employed definition of the eddy viscosity allows to remove the local balance assumption of the SGS turbulent kinetic energy formulated in all the dynamic Smagorinsky-type SGS models. Furthermore, because of the tensorial structure of the eddy viscosity the alignment assumption between the principal axes of the SGS turbulent stress tensor and the resolved strain-rate tensor is equally removed, an assumption which is employed in the scalar eddy viscosity SGS models. The proposed model is tested for a turbulent channel flow. Comparison with the results obtained with other dynamic SGS models (Dynamic Smagorinsky Model, Dynamic Mixed Model and Dynamic K-equation Model) shows that the tensorial definition of the eddy viscosity and the removal of the local balance assumption of the SGS turbulent kinetic energy considerably improves the agreement between results obtained with Large Eddy simulation (LES) and Direct Numerical Simulations (DNS), respectevely. Received August 26, 1999     

Theoretical Investigation of an Eddy-Viscosity-Type Expression of the Reynolds Stress with Low-Reynolds-Number Effect

In low-Reynolds-number turbulent flows, the influence of the molecular viscosity is important. The turbulence models which are applied to those flows should include the low-Reynolds-number effect. In this study, turbulent flow with the molecular viscosity effect is analyzed theoretically with the aid of a two-scale direct-interaction approximation (TSDIA) and the energy spectrum and a new low-Reynolds-number-type eddy-viscosity representation are derived. An priori test for the model expression on the basis of the result of direct numerical simulation (DNS) for turbulent Couette flows is performed. Received 5 July 2002 and accepted 8 January 2003 Published online 25 March 2003 Communicated by T.B. Gatski     

Large eddy simulation of complex turbulent flows: Physical aspects and research trends

In the current paper, we have primarily addressed one powerful simulation tool developed during the last decades—Large Eddy Simulation (LES), which is most suitable for unsteady three-dimensional complex turbulent flows in industry and natural environment. The main point in LES is that the large-scale motion is resolved while the small-scale motion is modeled or, in geophysical terminology, parameterized. With a view to devising a subgrid-scale(SGS) model of high quality, we have highlighted analyzing physical aspects in scale interaction and energy transfer such as dissipation, backscatter, local and non-local interaction, anisotropy and resolution requirement. They are the factors responsible for where the advantages and disadvantages in existing SGS models come from. A case study on LES of turbulence in vegetative canopy is presented to illustrate that LES model is more based on physical arguments. Then, varieties of challenging complex turbulent flows in both industry and geophysical fields in the near future are presented. In conclusion, we may say with confidence that new century shall see the flourish in the research of turbulence with the aid of LES combined with other approaches. The NSAF project supported by the NSFC and the Chinese Academy of Engineering Physics (10176032)     

LES-based filter-matrix lattice Boltzmann model for simulating fully developed turbulent channel flow

In this paper, a three-dimensional filter-matrix lattice Boltzmann (FMLB) model based on large eddy simulation (LES) was verified for simulating wall-bounded turbulent flows. The Vreman subgrid-scale model was employed in the present FMLB–LES framework, which had been proved to be capable of predicting turbulent near-wall region accurately. The fully developed turbulent channel flows were performed at a friction Reynolds number Re_τ of 180. The turbulence statistics computed from the present FMLB–LES simulations, including mean stream velocity profile, Reynolds stress profile and root-mean-square velocity fluctuations greed well with the LES results of multiple-relaxation-time (MRT) LB model, and some discrepancies in comparison with those direct numerical simulation (DNS) data of Kim et al. was also observed due to the relatively low grid resolution. Moreover, to investigate the influence of grid resolution on the present LES simulation, a DNS simulation on a finer gird was also implemented by present FMLB–D3Q19 model. Comparisons of detailed computed various turbulence statistics with available benchmark data of DNS showed quite well agreement.     

Improving separated-flow predictions using an anisotropy-capturing subgrid-scale model

The major conclusion of this paper is that resolution requirements for large-eddy simulation (LES) of flow separation and reattachment can be significantly reduced using the anisotropy-capturing explicit algebraic subgrid-scale (SGS) stress model (EASSM) of Marstorp et al. (J. Fluid Mech., vol. 639, 2009, pp. 403–432), instead of the conventional isotropic dynamic eddy-viscosity model (DEVM). LES of flow separation in a channel with streamwise periodic hill-shaped constrictions and spanwise homogeneity is performed at coarse resolutions for which it is observed that flow separation cannot be predicted without a SGS model and cannot be correctly predicted by the DEVM, while reasonable predictions are obtained with the EASSM. It is shown that the lower resolution requirements by the EASSM, compared to the DEVM, is not only due its nonlinear formulation, but also due to the better formulation of its eddy-viscosity part. The improvements obtained with the EASSM have previously been demonstrated using higher-order numerical solvers for channel flows. In this study, it is observed that these improvements still remain using a low-order code with significant inherent numerical dissipation.     

An investigation of thermally stratified turbulent channel flow with temperature oscillation on the bottom wall by large eddy simulation

Thermally stratified shear turbulent channel flow with temperature oscillation on the bottom wall of the channel is calculated to investigate the behavior of turbulent flow and heat transfer by use of large eddy simulation (LES) approach coupled with dynamic subgrid-scale (SGS) models. The objective of this study is to deal with the effect of the temperature oscillation on turbulent behavior of thermally stratified turbulent channel flow and to examine the effectiveness of the LES technique for predicting statistically unsteady turbulent flow driven by time-varying buoyancy force. To validate the present calculation, thermally stratified shear turbulent channel flow is computed and compared with available data obtained by direct numerical simulation (DNS), which confirm that the present approach can be used to predict thermally stratified turbulent channel flow satisfactorily. Further, to illustrate the effect of the temperature oscillation with different Richardson numbers and periods of the oscillation on turbulence characteristics, the phase-averaged mean value and fluctuation of the resolved velocities and temperature, and instantaneous velocity fluctuation structures are analyzed.     

Parallel FEM LES with one-equation subgrid-scale model for incompressible flows

This article develops a parallel large-eddy simulation (LES) with a one-equation subgrid-scale (SGS) model based on the Galerkin finite element method and three-dimensional (3D) brick elements. The governing filtered Navier–Stokes equations were solved by a second-order accurate fractional-step method, which decomposed the implicit velocity–pressure coupling in incompressible flow and segregated the solution to the advection and diffusion terms. The transport equation for the SGS turbulent kinetic energy was solved to calculate the SGS processes. This FEM LES model was applied to study the turbulence of the benchmark open channel flow at a Reynolds number Re_τ = 180 (based on the friction velocity and channel height) using different model constants and grid resolutions. By comparing the turbulence statistics calculated by the current model with those obtained from direct numerical simulation (DNS) and experiments in literature, an optimum set of model constants for the current FEM LES model was established. The budgets of turbulent kinetic energy and vertical Reynolds stress were then analysed for the open channel flow. Finally, the flow structures were visualised to further reveal some important characteristics. It was demonstrated that the current model with the optimum model constants can predict well the organised structure near the wall and free surface, and can be further applied to other fundamental and engineering applications.     

Implicit large-eddy simulation applied to turbulent channel flow with periodic constrictions

The subgrid-scale (SGS) model in a large-eddy simulation (LES) operates on a range of scales which is marginally resolved by discretization schemes. Accordingly, the discretization scheme and the subgrid-scale model are linked. One can exploit this link by developing discretization methods from subgrid-scale models, or the converse. Approaches where SGS models and numerical discretizations are fully merged are called implicit LES (ILES). Recently, we have proposed a systematic framework for the design, analysis, and optimization of nonlinear discretization schemes for implicit LES. In this framework parameters inherent to the discretization scheme are determined in such a way that the numerical truncation error acts as a physically motivated SGS model. The resulting so-called adaptive local deconvolution method (ALDM) for implicit LES allows for reliable predictions of isotropic forced and decaying turbulence and of unbounded transitional flows for a wide range of Reynolds numbers. In the present paper, ALDM is evaluated for the separated flow through a channel with streamwise-periodic constrictions at two Reynolds numbers Re = 2,808 and Re = 10,595. We demonstrate that, although model parameters of ALDM have been determined for isotropic turbulence at infinite Reynolds number, it successfully predicts mean flow and turbulence statistics in the considered physically complex, anisotropic, and inhomogeneous flow regime. It is shown that the implicit model performs at least as well as an established explicit model.