A degradable atom transfer radical polymerization inimer: Synthesis,polymerization, and cleavage of the resulting polymer products

A novel degradable inimer for atom transfer radical polymerization (ATRP), 2‐(6‐(2‐((2‐bromo‐2‐methylpropanoyl)oxy)ethyl)pyridin‐2‐yl)ethyl methacrylate (PyDEBrMΑ), was synthesized by the two‐step esterification of 2,6‐pyridinediethanol, first with α‐bromoisobutyryl bromide in order to introduce the initiator moiety, and then with methacryloyl chloride in order to introduce the monomer moiety. PyDEBrMA was subsequently used to initiate the self‐condensing ATRP of methyl methacrylate (MMA) to obtain a hyperbranched MMA homopolymer which could be cleaved at the PyDEBrMA residue either by treatment under mildly alkaline hydrolysis conditions (sodium deuteroxide in d₆‐DMSO at room temperature) or thermolysis at 150 °C. The lability of the PyDEBrMA residue arises from the presence in its structure of two 2‐(pyridin‐2‐yl)ethyl ester moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2831–2839     

A Novel One‐Pot Synthesis of Substituted Quinolines

A synthesis of quinoline derivatives is described via reaction between ethyl bromopyruvate (=ethyl 3‐bromo‐2‐oxopropanoate), acetylenedicarboxylate, and isatin (=1H‐indole‐2,3‐dione) in the presence of NaH as a base. Also, these reactions were performed without ethyl bromopyruvate. The reaction in the presence of ethyl bromopyruvate provides regioselectively a quinoline with the ethyl ester group in 4‐position. In the absence of ethyl bromopyruvate, the reaction leads to functionalized quinolines with the same ester groups in 2‐, 3‐, and 4‐positions.     

Simple,Efficient, and Catalyst‐Free Synthesis of (2‐Amino‐4H‐1‐benzopyran‐4‐yl)phosphonates in Polyethylene Glycol

Several (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonates were efficiently synthesized by employing a multicomponent protocol involving a salicylaldehyde, malononitrile or ethyl cyanoacetate, and a trialkyl phosphite in polyethylene glycol. The latter could be recovered and re‐used. No additional solvent or catalyst was required. To the best of our knowledge, this is the first report of the one‐pot preparation of (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonic acid dimethyl esters.     

Concentration effects in the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide

The monomer concentration for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide was optimized utilizing high‐throughput experimentation methods. Detailed ¹H‐NMR spectroscopic investigations were performed to understand the mechanistic aspects of the observed concentration effects. Finally, the improved polymerization concentration was applied for the synthesis of higher molecular weight (> 10,000 Da) poly(2‐ethyl‐2‐oxazoline)s. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1487–1497, 2005     

A One‐Pot Organometallic Route from a 4‐Alkenylpyridine to a 4,4‐Spiro‐Linked Ethyl 1,4‐Dihydropyridine‐1‐carboxylate

In a one‐pot process without isolation of intermediates, (but‐3‐en‐1‐yl)pyridine ( 13 ) is treated sequentially with dicyclohexylborane, trimethylaluminium, and ethyl carbonochloridate yielding ethyl 1,4‐dihydro‐4,4‐(tetramethylene)pyridine‐1‐carboxylate (=ethyl 8‐azaspiro[4.5]deca‐6,9‐diene‐8‐carboxylate; 2 ) in 46% yield based on starting alkenylpyridine 13 (Scheme 5).     

Synthesis of (4Z)‐4‐(Arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones by the Reaction of Ethyl (2Z)‐3‐Aryl‐2‐isothiocyanatoprop‐2‐enoates with Organolithium Compounds

A convenient one‐pot method for the preparation of (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones 2 and 3 from ethyl (2Z)‐3‐aryl‐2‐isothiocyanatoprop‐2‐enoates 1 , which can be easily prepared from ethyl 2‐azidoacetate and aromatic aldehydes, has been developed. Thus, these α‐isothiocyanato α,β‐unsaturated esters were treated with organolithium compounds, including lithium enolates of acetates, to provide 5‐substituted (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones, 2 , and 2‐[(4Z)‐(4‐arylmethylidene)‐5‐ethoxy‐2‐thioxo‐1,3‐oxazolidin‐5‐yl]acetates, 3 .     

Efficient Synthesis of Some Unsaturated [1,2,3]‐Triazole‐Linked Glycoconjugates

Thermal 1,3‐dipolar cycloaddition of ethyl 4‐azido‐2,3,4‐trideoxy‐α‐D‐erythro‐hex‐2‐enopyranosides with diethyl acetylenedicarboxylate or copper‐catalyzed reaction with various functionalized alkynes gave the corresponding 1‐(ethyl 2,3,4‐trideoxy‐α‐D‐erythro‐hex‐2‐enopyranosid‐4‐yl)‐1H‐1,2,3‐triazole derivatives in quite good yields. These unsaturated compounds could be transformed into 1‐(ethyl 2,3‐di‐O‐acetyl‐4‐deoxy‐α‐D‐mannopyranosid‐4‐yl)‐1H‐1,2,3‐triazoles by a simple dihydroxylation reaction. Copper‐catalyzed condensation of ethyl 6‐O‐acetyl‐4‐azido‐2,3,4‐trideoxy‐α‐D‐erythro‐hex‐2‐enopyranoside with 1,3,5‐triethynylbenzene or 1,3,5‐tris(prop‐2‐ynyloxy)benzene afforded the corresponding trivalent glycoconjugate clusters.     

Poly(L‐glutamic acid) grafted with oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate): Thermal phase transition,secondary structure,and self‐assembly

Thermoresponsive and pH‐responsive graft copolymers, poly(L ‐glutamate)‐g‐oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate) and poly(L ‐glutamic acid‐co‐(L ‐glutamate‐g‐oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate))), were synthesized by ring‐opening polymerization (ROP) of N‐carboxyanhydride (NCA) monomers and subsequent atom transfer radical polymerization of 2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate. The thermoresponsiveness of graft copolymers could be tuned by the molecular weight of oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate) (OMEO₃MA), composition of poly(L ‐glutamic acid) (PLGA) backbone and pH of the aqueous solution. The α‐helical contents of graft copolymers could be influenced by OMEO₃MA length and pH of the aqueous solution. In addition, the graft copolymers exhibited tunable self‐assembly behavior. The hydrodynamic radius (R_h) and critical micellization concentration values of micelles were relevant to the length of OMEO₃MA and the composition of biodegradable PLGA backbone. The R_h could also be adjusted by the temperature and pH values. Lastly, in vitro methyl thiazolyl tetrazolium (MTT) assay revealed that the graft copolymers were biocompatible to HeLa cells. Therefore, with good biocompatibility, well‐defined secondary structure, and mono‐, dual‐responsiveness, these graft copolymers are promising stimuli‐responsive materials for biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,Crystal Structure,Theoretical Calculation,Specific Heat Capacity,and Thermodynamic Properties of 4,4'-Bis(3-N-methoxyformyl thioureido)-diphenyloxide

4,4′‐Bis(3‐N‐methoxyformyl thioureido)‐diphenyloxide was prepared via reaction of 4,4′‐diaminodiphenyl alter with potassium sulfocyanate and ethyl chloroacetate in ethyl acetate. The single crystal of the title compound was cultured by slow evaporation method at room temperature. The crystal structure was determined with X‐ray diffractometer. It is a monoclinic crystal, space group C2/c with a=0.95911(19) nm, b=0.75922(15) nm, c=2.7161(5) nm, α=90°, β=97.675 (3) °, γ=90°, V=1.9601(7) nm³, Z=4, D_c=1.472 g·cm⁻³, F(000) =904, µ=0.311 cm⁻¹, R₁=0.0367, wR₂=0.1408. The specific heat capacity of the title compound was determined with continuous C_p mode of mircocalorimeter. The thermal behavior of the title compound was studied under a non‐isothermal condition by DSC method.     

Three closely related dibenzazepine carboxylic acids: hydrogen‐bonded aggregation in one,two and three dimensions

In the structure of (6R*,11R*)‐5‐acetyl‐11‐ethyl‐6,11‐dihydro‐5H‐dibenzo[b,e]azepine‐6‐carboxylic acid, C₁₉H₁₉NO₃, (I), the molecules are linked into sheets by a combination of O—H...O and C—H...O hydrogen bonds; in the structure of the monomethyl analogue (6RS,11SR)‐5‐acetyl‐11‐ethyl‐2‐methyl‐6,11‐dihydro‐5H‐dibenzo[b,e]azepine‐6‐carboxylic acid, C₂₀H₂₁NO₃, (II), the molecules are linked into simple C(7) chains by O—H...O hydrogen bonds; and in the structure of the dimethyl analogue (6RS,11SR)‐5‐acetyl‐11‐ethyl‐1,3‐dimethyl‐6,11‐dihydro‐5H‐dibenzo[b,e]azepine‐6‐carboxylic acid, C₂₁H₂₃NO₃, (III), a combination of O—H...O, C—H...O and C—H...π(arene) hydrogen bonds links the molecules into a three‐dimensional framework structure. None of these structures exhibits the R₂²(8) dimer motif characteristic of simple carboxylic acids.     

Synthesis,crystalline morphologies,self‐assembly,and properties of H‐shaped amphiphilic dually responsive terpolymers

Novel and well‐defined amphiphilic H‐shaped terpolymers poly(L‐lactide)‐block‐(poly(2‐(N,N‐dimethylamino)ethyl methacrylate) ‐block‐)poly(ε‐caprolactone)(‐block‐poly(2‐(N,N‐dimethylamino)ethyl methacrylate)) ‐b‐poly(L‐lactide) (PLLA‐b‐(PDMAEMA‐b‐)PCL(‐b‐PDMAEMA)‐b‐PLLA) were synthesized by the combination of ring‐opening polymerization, atom transfer radical polymerization, and click chemistry. The H‐shaped amphiphilic terpolymers can self‐assemble into spherical nano‐micelles in water. Because of the dually responsive (temperature and pH) properties of PDMAEMA segments, the hydrodynamic radius of the micelles of the H‐shaped terpolymer solution can be adjusted by altering the environmental temperature or pH values. The thermal properties investigation and the crystalline morphology analysis indicate that the branched structure of the H‐shaped terpolymers and the presence of amorphous PDMAEMA segments together led to the obvious decrease of PCL segments and the complete destruction of crystallinity of the PLLA segments in the H‐shaped terpolymers. In addition, the H‐shaped terpolymer film has better hydrophilicity than linear PCL or triblock polymer of PLLA‐b‐(N₃? )PCL(? N₃)‐b‐PLLA, due to the decrease or destruction of the crystallizability of the PCL or PLLA in the H‐shaped terpolymer and the presence of hydrophilic PDMAEMA segments. These unique H‐shaped amphiphilic terpolymers composed of biodegradable and biocompatible PCL and PLLA components and intelligent and biocompatible PDMAEMA component will have the potential applications in biomedical fields. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Amphiphilic conetworks. II. Novel two‐step synthesis of poly[2‐(dimethylamino)ethyl methacrylate]–polyisobutylene,poly(N‐isopropylacrylamide)–polyisobutylene,and poly(N,N‐dimethylacrylamide)–polyisobutylene hydrogels

Amphiphilic polymer conetworks consisting of hydrophilic poly[2‐(dimethylamino)ethyl methacrylate], poly(N‐isopropylacrylamide), or poly(N,N‐dimethylacrylamide) and hydrophobic polyisobutylene chains were synthesized with a novel two‐step procedure. In the first step, a methacrylate‐multifunctional polyisobutylene crosslinker was prepared by the cationic copolymerization of isobutylene with 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate. In the second step, the methacrylate‐multifunctional polyisobutylene crosslinker, with a number‐average molecular weight of 8200 and an average functionality of approximately 4 per chain, was copolymerized radically with 2‐(dimethylamino)ethyl methacrylate, N‐isopropylacrylamide, or N,N‐dimethylacrylamide into transparent amphiphilic conetworks containing 42–47 mol % hydrophilic monomer. The synthesized conetworks were characterized with solid‐state ¹³C NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proved by swelling in both water and n‐heptane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6378–6384, 2006     

Main‐chain chiral poly(2‐oxazoline)s: Influence of alkyl side‐chain on secondary structure formation in solution

The synthesis and microwave‐assisted polymerization of a series of chiral 2‐oxazolines with varying alkyl pendant groups, namely R‐2‐ethyl‐4‐ethyl‐2‐oxazoline (R‐EtEtOx), R‐2‐butyl‐4‐ethyl‐2‐oxazoline (R‐BuEtOx), R‐2‐octyl‐4‐ethyl‐2‐oxazoline, 2‐nonyl‐4‐ethyl‐2‐oxazoline, and R‐2‐undecyl‐4‐ethyl‐2‐oxazoline (R‐UndeEtOx), are reported. A kinetic investigation of the polymerization of R‐EtEtOx revealed a living polymerization mechanism. The poly(2‐oxazoline)s containing an ethyl, butyl, and octyl pendant group form similar chiral structures according to circular dichroism measurements. When the pendant group is further elongated, the chiral structure becomes more flexible in trifluoroethanol and the thermal response in hexafluoroisopropanol (HFIP) significantly changes. The short‐range structure of poly‐R‐BuEtOx dissolved in HFIP is thermoresponsive in a complex way, due to HFIP hydrogen bonding to the polymeric amide groups, whereas the long‐range structure determined from small angle neutron scattering is insensitive to temperature demonstrating that only the local secondary structure changes with temperature. In addition, the chiral structure of poly‐R‐UndeEtOx depends on the polarity of the solvent. The short‐range structure becomes more flexible in polar solvents, most likely due to interactions with the amide groups disturbing the secondary structure. In contrast, the long‐range structural transition from an ellipsoid in the apolar n‐hexane to a rod structure in the polar n‐butanol is ascribed to better solvation of the long aliphatic side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

Synthesis of adaptative and amphiphilic polymer model conetworks by versatile combination of ATRP,ROP, and “Click chemistry”

Well‐defined adaptative and amphiphilic polymer conetworks based on hydrophilic poly(N,N‐dimethylamino‐2‐ethyl methacrylate) (PDMAEMA) and hydrophobic poly(ε‐caprolactone) (PCL) have been prepared by combination of ATRP, ROP, and “Click chemistry.” Telechelic α,ω‐alkyne terminated PCL crosslinker was obtained by ring‐opening polymerization (ROP) of CL in THF at 80 °C initiated by 1,4‐butanediol and catalyzed by tin(II) bis 2‐ethyl hexanoate (Sn(Oct)₂), followed by the quantitative esterification of hydroxyl end‐groups by activated 4‐pentynoic acid. In parallel, an azido‐containing PDMAEMA‐based copolymer was obtained in a three‐step strategy involving primarily the copolymerization of DMAEMA with newly synthesized 2‐(2‐azidoethoxy)ethyl methacrylate (AEEMA) monomer. The latter was obtained by nucleophilic substitution of chloride atom from 2‐(2‐chloroethoxy)ethanol by an azide group followed by the esterification reaction of the hydroxyl group with methacrylic anhydride. The copolymerization was carried out in an equivolumic mixture of H₂O and isopropanol at r.t. and initiated by a ω‐bromoisobutyryl oligo PEO macroinitiator in the presence of various ligated copper(I)‐based catalysts. In a last step, both polymer precursors were chemically linked by the Huisgen‐1,3‐dipolar cycloaddition in anhydrous THF at r.t. using CuBr complexed by 2,2′‐bipyridine ligand as catalyst. Final material was characterized by the means of DSC and SEM, both attesting of a homogeneous distribution of the PCL crosslinkers and a highly porous structure in this new amphiphilic model conetworks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4997–5013, 2008     

Toward the design of LPEI containing block copolymers: Improved synthesis protocol,selective hydrolysis,and detailed characterization

The synthesis of poly(2‐ethyl‐2‐oxazoline)‐b‐linear poly(ethylenimine) (PEtOx‐b‐LPEI) copolymers by selective basic hydrolysis of PEtOx‐b‐poly(2‐H‐2‐oxazoline) (PEtOx‐b‐PHOx) is described. For this purpose, an easy method for the preparation of the 2‐H‐2‐oxazoline (HOx) monomer was developed. Based on the microwave‐assisted polymerization kinetics for this monomer, PEtOx‐b‐PHOx copolymers were prepared. Subsequently, the block copolymers were selectively hydrolyzed to PEtOx‐b‐LPEI under basic conditions. The success of the polymerizations and subsequent post‐polymerization reactions was demonstrated by ¹H NMR spectroscopy and MALDI‐TOF‐MS investigations of the obtained polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oligonucleotides Containing 7‐Deaza‐2′‐deoxyxanthosine: Synthesis,Base Protection,and Base‐Pair Stability

Oligonucleotides incorporating 7‐deaza‐2′‐deoxyxanthosine ( 3 ) and 2′‐deoxyxanthosine ( 1 ) were prepared by solid‐phase synthesis using the phosphoramidites 6 – 9 and 16 which were protected with allyl, diphenylcarbamoyl, or 2‐(4‐nitrophenyl)ethyl groups. Among the various groups, only the 2‐(4‐nitrophenyl)ethyl group was applicable to 7‐deazaxanthine protection being removed with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) by β‐elimination, while the deprotection of the allyl residue with Pd⁰ catalyst or the diphenylcarbamoyl group with ammonia failed. Contrarily, the allyl group was found to be an excellent protecting group for 2′‐deoxyxanthosine ( 1 ). The base pairing of nucleoside 3 with the four canonical DNA constituents as well as with 3‐bromo‐1‐(2‐deoxy‐β‐D ‐erythro‐pentofuranosyl)‐1H‐pyrazolo[3,4‐d]pyrimidine‐4,6‐diamine ( 4 ) within the 12‐mer duplexes was studied, showing that 7‐deaza‐2′‐deoxyxanthosine ( 3 ) has the same universal base‐pairing properties as 2′‐deoxyxanthosine ( 1 ). Contrary to the latter, it is extremely stable at the N‐glycosylic bond, while compound 1 is easily hydrolyzed under slightly acidic conditions. Due to the pK_a values 5.7 ( 1 ) and 6.7 ( 3 ), both compounds form monoanions under neutral conditions (95% for 1 ; 65% for 3 ). Although both compounds form monoanions at pH 7.0, pH‐dependent T_m measurements showed that the base‐pair stability of 7‐deaza‐2′‐deoxyxanthosine ( 3 ) with dT is pH‐independent. This indicates that the 2‐oxo group is not involved in base‐pair formation.     

Determination of eight fatty acid ethyl esters in meconium samples by headspace solid‐phase microextraction and gas chromatography–mass spectrometry

A number of fatty acid ethyl esters (FAEEs) have recently been detected in meconium samples. Several of these FAEEs have been evaluated as possible biomarkers for in utero ethanol exposure. In the present study, a method was optimized and validated for the simultaneous determination of eight FAEEs (ethyl laurate, ethyl myristate, ethyl palmitate, ethyl palmitoleate, ethyl stearate, ethyl oleate, ethyl linoleate and ethyl arachidonate) in meconium samples. FAEEs were extracted by headspace solid‐phase microextraction. Analyte detection and quantification were carried out using GC‐MS operated in chemical ionization mode. The corresponding D5‐ethyl esters were synthesized and used as internal standards. The LOQ and LOD for each analyte were <150 and <100 ng/g, respectively. The method showed good linearity (r²>0.98) in the concentration range studied (LOQ – 2000 ng/g). The intra‐ and interday imprecision, given by the RSD of the method, was lower than 15% for all FAEEs studied. The validated method was applied to 63 authentic specimens. FAEEs could be detected in alcohol‐exposed newborns (>600 ng/g cumulative concentration). Interestingly, FAEEs could also be detected in some non‐exposed newborns, although the concentrations were much lower than those measured in exposed cases.     

Reaction of Ketene Dithioacetals with Pyrazolylcarbohydrazide： Synthesis and Biological Activities of Ethyl 5-Amino-1-（5＇-methyl-1 ＇-t-butyl-4＇-pyrazolyl）carbonyl-3-methylthio-1 H-pyrazole-4-carboxylate

The title compound, C16H23N5O3S, ethyl 5-amino-1-(5‘-methyl-1‘-t-butyl-4‘-pyrazolyl)carbonyl-3-methylthio-1H-pyrazole-4-carboxylate (5) has been synthesized by the treatment of ethyl 2-cyano-3,3-dimethylthioacrylate with 1-t-butyl-5-methyl-4-hydrazinocarbonylpyrazole (4) in refluxed ethanol. The possible mechanism of the above reaction was also discussed. The results of biological test show that the title compound has fungicidal and plant growth regulation activities.     

Synthesis of 3‐Substituted 2‐Thioxo‐2,3‐dihydro‐1H‐benzofuro[3,2‐ d ] pyrimidin‐4(1H)‐ones

With the purpose of searching for new biologically active compounds, a method of synthesis of new heterocyclic systems [3‐alkyl(aryl)‐2‐thioxo‐2,3‐dihydro‐1H‐benzofuro[3,2‐d]pyrimidin‐4(1H)‐ones] has been developed. The method is based on the interaction of ethyl 3‐isothiocyanato‐1‐benzofurane‐2‐carboxylate in 2‐propanol with amines in the presence of an equimolecular quantity of triethylamine.