Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Facile synthesis of a tricyclohexylphosphine‐stabilized η3‐allyl‐carboxylato Ni(II) complex and its relevance in electrochemical butadiene carbon dioxide coupling

With the reaction of bis(1,5‐cyclooctadiene)nickel(0) and trans‐penta‐2,4‐dienoic acid in the presence of tricyclohexylphosphine, a new more general method was developed to synthesize cyclic π³‐allyl‐carboxylato Ni(II) complexes, which are known to be intermediates in the C? C coupling of butadiene and CO₂. The cyclic π³‐allyl‐carboxylato Ni(II) complex obtained is tested as a mediator in the electrochemical coupling reaction of butadiene and carbon dioxide. We also demonstrate the dependency on the coordination sphere by using platinum instead of nickel as the metal center. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis, Structure and Biological Activities of S-[α-（ 4-Methoxyphenylcarbonyl ）-2-（1,2,4-triazole-l-yl） ethyl-N, N-dime-thyldithiocarbamate

The title compound was prepared by reaction of N, N‐dimethyldithiocarbamate sodium with l‐bromo‐l‐(4‐methoxyphenylcarbonyl)‐2‐(1, 2, 4‐triazole‐l‐yl) ethane. Its crystal structure has been determined by X‐ray diffraction analysis. The crystal belongs to triclinic with space group Pī, a = 0.7339(2) nm, b = 1.1032(2) nm, c = 1.1203(2) nm, a = 90.27(3)°, β = 102.03(3)°, γ = 104.91(3)°, Z=2, V = 0.8556(3) nm³, D_c = 1.360 g/cm³, μ =0.325 mm^?1, F(000)=368, final R₁ =0.0475. The planes of 4‐methoxybenzyl group and triazole ring are nearly perpendicular to each other. The dihedral angle is 83.97°. There is an obvious π‐π stacking interaction between the molecules in the crystal lattice. The results of biological test show that the title compound has fungicidal and plant growth regulating activities.     

Volumetric, Ultrasonic and Transport Properties of Binary Liquid Mixtures Containing Dimethyl Formamide at 303.15 K

Excess volumes （v^E）, ultrasonic velocities （u）, isentropic compressibility （△Ks） and viscosities （η） for the binary mixtures of dimethyl formamide （DMF） with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at 303.15 K were studied. Excess volume data exhibit an inversion in sign for the mixtures of dimethyl formamide with 1,2- and 1,3-dichlorobenzenes and the property is completely positive over the entire composition range for the mixtures of dimethyl formamide with 1,2,4-trichlorobenzene, o-nitrotoluene and m-nitrotoluene. On the other hand, the quantity is negative for the mixtures of dimethyl formamide with chlorotoluenes. Isentropic compressibility （Ks） has been computed for the same systems from precise sound velocity and density data. Further, deviation of isentropic com- pressibility （△Ks） from ideal behavior was also calculated. AKs values are negative over the entire volume fraction range in all the binary mixtures. The experimental sound velocity data were analysed in terms of Free Length Theory （FLT） and Collision Factor Theory （CFT）. The viscosity data were analysed on the basis of corresponding state approach. The measured data were discussed on the basis of intermolecular interactions between unlike molecules.     

Study of Furoxan Derivatives for Energetic Applications

Two novel energetic compounds, 3,4‐bis(1′,2′,4′‐triazole‐3′‐yl)furoxan (BTAF) and 3,4‐bis(1′‐nitro‐1′,2′,4′‐triazole‐3′‐yl)furoxan (BNTAF), were prepared and their structures were characterized by IR, ¹H NMR, ¹³C NMR, MS techniques and elemental analysis. The properties of BTAF and BNTAF were estimated. The predicted performance data of BTAF are as follows: density (measured) is 1.75 g/cm³, nitrogen content 50.9%, detonation velocity 7277 m/s, detonation pressure 20.1 GPa and enthalpy of formation +419.7 kJ/mol. The predicted performance data of BNTAF are as follows: density is 1.84 g/cm³, nitrogen content 45.2%, enthalpy of formation +841.5 kJ/mol, detonation velocity 8490 m/s and detonation pressure 32.4 GPa. The main themal properties of BTAF and BNTAF were analyzed by DSC and TG techniques, the results show that BTAF melts with concomitant decomposition at 188.8°C, the melting point of BNTAF is at 99.2°C and its first decomposition temperature is 139.2°C.     

Synthesis and characterization of phenanthrocarbazole–diketopyrrolopyrrole copolymer for high‐performance field‐effect transistors

In this study, we successfully designed and synthesized a novel phenanthro[1,10,9,8‐c,d,e,f,g]carbazole ( PCZ )‐based copolymer poly[N‐(2‐octyldodecyl)‐4,8‐phenanthro[1,10,9,8‐c,d,e,f,g]carbazole‐alt‐2,5‐dihexadecyl‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione] ( PPDPP ) with an extended π‐conjugation along the vertical orientation of polymer main chain. This polymer exhibited excellent solubility in common solvent and high thermal stability, owning good properties for solution‐processed field‐effect transistors (FETs). Besides, absorption spectra demonstrated that annealing PPDPP thin films led to obviously red‐shifted maxima, indicating the formations of aggregation or orderly π–π stacking in their solid‐state films. X‐ray diffraction measurements indicated the crystallinity of PPDPP thin films was enhanced after high temperature annealing, which was favorable for charge transport. The solution‐processed PPDPP ‐based FET devices were fabricated with a bottom‐gate/bottom‐contact geometry. A high hole mobility of up to 0.30 cm²/Vs and a current on/off ratio above 10⁵ had been demonstrated. These results indicated that the copolymers constructed by this kind of ladder‐type cores could be promising organic semiconductors for high‐performance FET applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Potassium Thiocyanate‐Promoted One‐Pot Synthesis of (1,3‐Diaryl‐2,5‐dioxoimidazolidin‐4‐ylidene)acetates from Aryl Isocyanates and Alkyl Propiolates. Short Communication

The reaction of aryl isocyanates and alkyl propiolates (=alkyl prop‐2‐ynoates) in the presence of potassium thiocyanate (KSCN) led to geometric isomers of alkyl 2‐(1,3‐diaryl‐2,5‐dioxoimidazolidin‐4‐ylidene)acetates in moderate‐to‐good yields.     

Synthesis,Crystal Structure and Magnetic Properties of a 1‐D Polymer, [Cu(NITpPy)2(H2TCB)(H20)]·2H2O

A novel complex [Cu(NnpPy)₂(H_lTCB)(H₁O)]·2H₂O (NITpPy = 2‐(pyrid‐4′‐yl)‐4,4,5,5‐tetramethyl‐1, 3‐dioxoimidazoline; H₂TCB = 1, 5‐dicarboxybenzene carboxylic‐2, 4‐diacid) has been synthesized and characterized by X‐ray crystallography analysis. The crystal structure consists of infinite chains of Cu‐(NITpPy)₂(H₂O) units linked by H₂TCB ligands. The complex crystallizes in triclinic system with space group PI. Crystal data: a = 1.0594(2) nm, b = 1.3830(3) nm, c = 1.5551(3) nm, a = 67.75(3)°, β = 89.83(3)°, γ = 70.54(3)°. The variable magnetic susceptibility studies lead to magnetic coupling constant values of J₁= ?11.18 cm‐¹ (Cu—Rad) and J₂ = ?4.06 cm^?1 (Cu—Cu).     

New Synthetic Routes to Biologically Interesting Geranylated Flavanones and Geranylated Chalcones: First Total Synthesis of (±)‐Prostratol F,Xanthoangelol, and (±)‐Lespeol

A new and efficient synthetic approach to biologically interesting geranylated flavanones and geranylated chalcones is described. Thus, the first total syntheses of the geranylated flavanones (±)‐prostratol F ( 1 ), (±)‐8‐geranyl‐3′,4′,7‐trihydroxyflavanone ( 2 ), and (±)‐6‐geranyl‐5,7‐dihydroxy‐3′,4′‐dimethoxyflavanone ( 3 ) were carried out starting from 2,4‐dihydroxyacetophenone ( 10 ) and 2,4,6‐trihydroxyacethophenone ( 17 ) in five to six steps (Schemes 2 and 3). The geranylated chalcones xanthoangelol ( 4 ), 3‐geranyl‐2,3′,4,4′‐tetrahydroxychalcone ( 5 ), (±)‐lespeol ( 6 ), and lespeol derivatives (±)‐ 7 – 9 were synthesized starting from 2,4‐dihydroxyacetophenone ( 10 ) in three to four steps (Schemes 2 and 6).     

Syntheses and Structures of Coordination Polymers Constructed by Semi‐Rigid Bicarboxylic Acid Ligands

The complexes [Co(L¹)(mpy)] ( 1 ), [Ni(L¹)(mpy)] ( 2 ), [Co(L¹)(tbpy)] · 2H₂O ( 3 ), [Ni₂(L¹)₂(tbpy)₂] · 5H₂O ( 4 ), [Mn₂(L¹)₂(tbpy)₂] · 3H₂O ( 5 ), [Mn(L¹)(biim‐3)] ( 6 ), [Ni₂(L¹)₂(btb)₂(H₂O)] · 2H₂O ( 7 ), [Cu(L²)(mpy)] · 7H₂O ( 8 ), [Co(L²)(tbpy)(H₂O)] ( 9 ), [Ni(L²)(tbpy)(H₂O)] · H₂O ( 10 ), [Cu(L²)(bib)] · 2H₂O ( 11 ), and [Cu(L²)(btb)] · 2H₂O ( 12 ) [H₂L¹ = (3‐carboxyl‐phenyl)‐(4‐(2′‐carboxyl‐phenyl)‐benzyl)ether, H₂L² = 3‐carboxy‐1‐(4′‐carboxybenzyl)‐2‐oxidopyridinium, mpy = 2‐(4‐(4′‐methylphenyl)‐6‐(pyrindin‐2‐yl)pyridin‐2‐yl)pyridine), tbpy = 2‐(4‐(4′‐tert‐butylphenyl)‐6‐(pyrindin‐2‐yl)pyridin‐2‐yl)pyridine), biim‐3 = 1,3‐bis(imidazol‐1′‐yl)propane, btb = 1,4‐bis(1,2,4‐triazol‐1‐ylmethyl)benzene, bib = 1,4‐bis(imidazol‐1′‐ylmethyl)benzene] were synthesized. Compounds 1 – 6 have similar 1D chain structures, which are further linked by π–π interactions to generate supramolecular double chains for 1 and 2 , and supramolecular layers for 3 – 6 . Compound 7 displays a 3D 6‐connected framework with (4⁴ · 6¹¹) topology. Compound 8 features a monomolecular structure, which is further linked by hydrogen bonds between the lattice water molecules and carboxylate oxygen atoms of L² anions to form a 2D supramolecular layer. The monomolecular structures of 9 and 10 are connected by hydrogen bonds and π–π interactions simultaneously to generate supramolecular layers. Compounds 11 and 12 show layer structures.     

Mechanistic aspects of ester–carbonate exchange in polycarbonate/cycloaliphatic polyester with model reactions

The reactive blending of bisphenol A polycarbonate (PC) with poly(1,4‐cyclohexanedimethylene‐1,4‐cyclohexanedicarboxylate) (PCCD) was investigated with a new high‐temperature solution‐blending methodology. The ester–carbonate exchange reaction (transesterification) in the blends was studied with NMR and Fourier transform infrared. The composition analysis of the PC/PCCD blends was performed with ¹H NMR, and the molecular weights were determined with viscosity methods. 1,4‐Dimethylcyclohexanedicarboxylate, 1,4‐cyclohexanedicarboxylic acid, and 1,4‐cyclohexanedimethanol were reacted with PC to study the tendency of polyester chain‐end reactions such as transesterification, acidolysis, and alcoholysis. These model reactions revealed that the reactive blending was affected by both alcoholysis and transesterification, whereas acidolysis was absent. The model reaction products were used to study the mechanistic aspects of PC/PCCD reactive blending, which indicated the formation of three stable triads; two corresponded to symmetrical and unsymmetrical aromatic–cycloaliphatic esters, and the other corresponded to aromatic–cycloaliphatic ethers. The composition analysis confirmed that in PC/PCCD reactive blending, the exchange reaction predominantly occurred in the polymer main chains, and the influence of the end groups was insignificant. The effect of the catalyst concentration and PC/PCCD composition on the extent of the exchange reaction was also investigated. Thermal analysis by differential scanning calorimetry revealed that the ester–carbonate exchange enhanced the compatibilization of PC/PCCD, and a single glass‐transition temperature was observed for the miscible blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3996–4008, 2004     

Tailoring the LCST of PNIPAAM‐b‐PLA‐b‐PNIPAAM Triblock Copolymers via Stereocomplexation

Poly(N‐isopropylacrylamide)‐block‐poly(l ‐lactic acid)‐block‐poly(N‐isopropylacrylamide) (PNIPAAM‐b‐PLLA‐b‐PNIPAAM) and PNIPAAM‐b‐PDLA‐b‐PNIPAAM triblock copolymers with varying polylactic acid (PLA) lengths are synthesized using a combination of ring‐opening polymerization and atom‐transfer radical polymerization. Results of ¹H NMR and gel permeation chromatography analyses show that the copolymers have a well‐defined triblock structure and the PLA segment lengths can be readily controlled with monomer feed ratio. Stereocomplexation between the enantiomeric PLA segments is confirmed with differential scanning calorimetry and wide‐angle X‐ray scattering. Dynamic light scattering experiments show that (1) the LCST of PNIPAAM in water could be tailored from 32 °C up to 38.5 °C by increasing the length of PLA segments and mixing copolymers of similar molecular weight with enantiomeric PLA segments to induce stereocomplexation, and (2) the LCST of each mixed copolymer system could be tailored within a 2–3 °C range of body temperature by manipulating the ratio of the enantiomeric copolymers in solution.

     

Synthesis and Antibacterial Activity of 3‐(5‐Methylisoxazol‐3‐yl) −1,2,4‐triazolo [3,4‐b]‐1,3,4‐thiadiazine Derivatives

The condensed products 2‐10 of 4‐amino‐5‐mercapto‐3‐(5‐methylisoxazol‐3‐yl)‐l,2,4‐triazole (1) with chloroacetaldehyde, 2‐bromocyclohexanone, chloranil, ωbromo‐ω‐(1H‐1, 2,4‐triazol‐l‐yl)acetophenone, 2‐bromo‐4′‐substituted acetophenones and 2‐bromo‐6′‐methoxy‐2′‐acetonaphthone were described. The antibacterial activities were also evaluated.     

Catalytic asymmetric 1,2‐Addition/Lactonization tandem reactions for the syntheses of chiral 3‐Substituted phthalides using organozinc reagents

Using chiral phosphoramide ligand 2d‐ Zn (II) complex derived from (1R,2R)‐1,2‐diphenylethylenediamine as the catalyst, we have developed efficient catalytic asymmetric 1,2‐addition/lactonization tandem reactions of diverse organozinc reagents with varied methyl 2‐formylbenzoates for the construction of optically enriched 3‐aryl or alkyl substituted phthalides, which are significant building blocks of many important chiral pharmaceuticals and natural products. The corresponding products could be afforded with good to excellent yields (up to 95%) and moderate to good enantioselectivities (up to 89%).     

Synthesis and Structure of Novel Thieno[2, 3‐d]Pyrimidine Derivatives Containing 1, 3, 4‐Oxadiazole Moiety

The reaction of 5‐(1‐pyrrolyl)‐4‐methyl‐2‐phenylthieno[2, 3‐d]pyrimidine carbohydrazide 5 with CS₂ in the presence of pyridine afforded the 6‐(2, 3‐dihydro‐2‐mercapto‐1, 3, 4‐oxadiazol‐5‐yl)‐4‐methyl‐5‐(1‐pyrrolyl)‐2‐phenylthieno[2, 3‐d]pyrimidine 6 , which reacted with methyl iodide in the presence of sodium methoxide to yield the 6‐(2‐methylthio‐1, 3, 4‐oxadiazol‐5‐yl)‐4‐methyl‐5‐(1‐pyrrolyl)‐2‐phenyl‐thieno[2, 3‐d]pyrimidine 7. The 6‐(2‐substituted‐1, 3, 4‐oxadiazol‐5‐yl)‐2‐phenylthieno[2, 3‐d]pyrimidine derivatives 9, 11 and 13 were obtained by the condensation of 6‐(2‐methylthio‐1, 3, 4‐oxadiazol‐5‐yl)‐2‐phenylthieno[2, 3‐d]pyrimidine 7 with appropriate secondary amines. The structure of the new compounds was substantiated from their IR, UV‐vis spectroscopy, ¹H NMR, mass spectra, elemental analysis and X‐ray crystal analysis.     

Development and validation of an ultra‐high‐performance liquid chromatography–tandem mass spectrometry method to determine the bioavailability of warfarin and its major metabolite 7‐hydroxy warfarin in rats dosed with oral formulations containing different polymorphic forms

A simple, sensitive and rapid ultra‐high‐performance liquid chromatography–electrospray ionization–tandem mass spectrometry method was developed and validated for the quantification of warfarin and 7‐hydroxy warfarin in Sprague Dawley (SD) rats. Animals were administered a single dose of warfarin sodium formulations (crystalline and amorphous) at 12 mg/kg via oral gavage and blood was drawn over a 96‐h time course. Sample process recoveries, matrix effect and analyte stability were determined. The linearity for warfarin and 7‐hydroxy warfarin was from 5 to 2000 ng/mL in blank SD rat plasma. Correlation coefficients (r²) for standard calibration curves were >.98 and analytes quantified within ±15% of target at all calibrator concentrations. The average percent accuracy and precision for intra‐ and inter‐day were 93.7%–113.8% and ≤12.1%, respectively, for warfarin and 7‐hydroxy warfarin, across the quality control standards (5, 10, 500, 1800 and 2000 ng/mL). Acceptable analytical recovery (>55%) was achieved with process efficiencies >41.5% and matrix effects <139.9% over the analytical range. Both analytes were stable in stock solution, autosampler, benchtop and three cycles of freeze–thaw with percent accuracy ≥90.2% and precision (percent relative standard deviation) ≤14%. The validated method was successfully applied to a pre‐clinical bioavailability study of crystalline and amorphous warfarin sodium formulations in SD rats.     

Synthesis of Dihydropyrans and Dihydrofurans via Radical Cyclization of Unsaturated Alcohols and 1,3‐Dicarbonyl Compounds

The oxidative cyclization reactions of 1,3‐dicarbonyl compounds 1a – 1c and α,β‐unsaturated alcohols 2a – 2f with Mn(OAc)₃ were performed, leading to dihydrofurans. Treatment of 1a and 1b with 2‐methylbut‐3‐en‐2‐ol ( 2a ) gave dihydrofurans 3aa and 3ba , and dihydropyrans 4aa and 4ba , as unexpected products. While the reaction of 2‐methylbut‐3‐yn‐2‐ol ( 2b ) with acetylacetone ( 1b ) yielded a bifuran, ethyl acetoacetate ( 1a ) led to a mixture of furan, bifuran, and salicylate derivatives. Besides, surprisingly, styryl‐substituted dihydrofurans were obtained from the reactions of 1,3‐dicarbonyl compounds and (3E)‐2,4‐diphenylbut‐3‐en‐2‐ol. The reaction mechanisms were proposed for the formation of the different products, considering intermediates in these reaction mixtures.     

Synthesis and Transformation of Methyl 2‐(6‐Hydroxy‐2‐phenylpyrimidin‐4‐yl)acetate: Simple Preparation of Pyrimidines with Heterocyclic Substituents

A simple and efficient synthesis of four new substituted pyrimidines, compounds 9a – d , from the title compound 3 is described. Conversion of 3 to methyl (E)‐3‐(dimethylamino)‐2‐(6‐methoxy‐2‐phenylpyrimidin‐4‐yl)prop‐2‐enoate ( 4 ), followed by condensation with various dinucleophiles according to the ‘enaminone methodology’, afforded the target compounds 9 in medium‐to‐good yields.     

New Approaches to the Synthesis of 4‐(2‐Aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones and 3‐Ureidoindoles and a Study of Their Interconversion

3‐Alkyl/aryl‐3‐ureido‐1H,3H‐quinoline‐2,4‐diones ( 2 ) and 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) react in boiling concentrated HCl to give 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ). The same compounds were prepared by the same procedure from 2‐alkyl/aryl‐3‐ureido‐1H‐indoles ( 4 ), which were obtained from the reaction of 3‐alkyl/aryl‐3‐aminoquinoline‐2,4(1H,3H)‐diones ( 1 ) with 1,3‐diphenylurea or by the transformation of 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) and 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ) in boiling AcOH. The latter were converted into 1,3‐bis[2‐(2‐oxo‐2,3‐dihydro‐1H‐imidazol‐4‐yl)phenyl]ureas ( 5 ) by treatment with triphosgene. All compounds were characterized by ¹H‐ and ¹³C‐NMR and IR spectroscopy, as well as atmospheric pressure chemical‐ionisation mass spectra.     

A Simple Synthesis of Polyfunctionalized 4‐Aminopyrazolidin‐3‐ones as ‘Aza‐deoxa’ Analogs of D‐Cycloserine

A simple five‐step synthesis of fully substituted (4RS,5RS)‐4‐aminopyrazolidin‐3‐ones as analogs of D ‐cycloserine was developed. It comprises a two‐step preparation of 5‐substituted (4RS,5RS)‐4‐(benzyloxycarbonylamino)pyrazolidin‐3‐ones, reductive alkylation at N(1), alkylation of the amidic N(2) with alkyl halides, and simultaneous hydrogenolytic deprotection/reductive alkylation of the primary NH₂ group. The synthesis enables an easy stepwise functionalization of the pyrazolidin‐3‐one core with only two types of common reagents, aldehydes (or ketones) and alkyl halides. The structures of products were elucidated by NMR spectroscopy and X‐ray diffraction.