聚苯胺分子印迹膜电化学传感器检测氯霉素

以苯胺为功能单体和交联剂,氯霉素(chloramphenicol,CAP)为模板分子,采用电化学聚合法(循环伏安法)在金电极上合成了对CAP具有快速响应能力的聚苯胺分子印迹膜;结合差示脉冲伏安法建立了针对氯霉素的检测方法,并将所制备的聚苯胺分子印迹膜用作电化学传感器以测定氯霉素眼药水中的氯霉素.结果表明,所制备的聚苯胺分子印迹膜具有制备简单、响应快速、灵敏度高、再生性能良好等特点;其对氯霉素眼药水中的氯霉素的检测结果令人满意,有望用于实际样品中氯霉素的检测.     

碳纳米管修饰电极分子印迹传感器的制备及其对氧乐果的测定

以氧乐果为模板分子,邻苯二胺为功能单体,在碳纳米管修饰的玻碳电极表面通过电聚合方法制成氧乐果分子印迹聚合物膜,用无水乙醇洗脱后制备出对氧乐果有特异响应的电化学传感器。通过循环伏安法和电化学阻抗法对分子印迹传感器的电化学性能进行表征。以K_3Fe(CN)_6为探针,采用差分脉冲伏安法研究了该分子印迹传感器的分析性能,建立了氧乐果的间接测定方法。结果表明,K_3Fe(CN)_6的相对峰电流与氧乐果浓度在1.0×10~(-7)~2.0×10~(-6)mol/L范围内呈良好的线性关系,检出限为3.6×10~(-8)mol/L。     

己烯雌酚分子印迹传感器的制备及其性能研究

应用分子印迹技术,以邻苯二胺为功能单体、己烯雌酚为模板,采用循环伏安法在玻碳电极表面合成了性能稳定的己烯雌酚分子印迹聚合膜,并用50%(V/V)乙醇溶液迅速去除模板,得到对己烯雌酚响应的分子印迹电化学传感器。研究了此分子印迹传感器的分析性能,建立了以K3Fe(CN)6为电子传递媒介的间接分析法。在1.0×10-7～5.1×10-6mol/L范围内,己烯雌酚的浓度与K3Fe(CN)6的相对峰电流变化呈线性关系。选择性实验表明,此传感器对结构相似的分子有较强的抗干扰能力。     

基于CS-GO/AgNPs氯酚分子印迹电化学传感器的构建

以2,4-二氯苯酚(2,4-DCP)为模板分子,吡咯(Py)为功能单体,协同壳聚糖-银纳米粒子氧化石墨烯(CS-GO/AgNPs)复合材料增强电导性,在玻碳电极(GCE)表面制备分子印迹膜,构建了2,4-DCP分子印迹电化学传感器(2,4-DCP-MIECS)并用于水环境中氯酚的特异性识别与检测。通过透射电子显微镜(TEM)、X射线衍射仪(XRD)对GO/AgNPs复合材料进行分析表征,采用循环伏安法(CV)、交流阻抗法(EIS)对电化学传感器进行性能表征。采用差分脉冲伏安法(DPV)对2,4-DCP进行检测,该电化学传感器的线性范围为1.0～1.0×10~3pmol/L,检出限为0.1 pmol/L,该传感器已用于水样品中2,4-DCP的检测。     

识别牛血红蛋白的分子印迹电化学传感器的制备与研究

采用电化学聚合物法制备了一种用于识别牛血红蛋白(BHb)的分子印迹电化学传感器。玻碳电极表面经电化学法沉积一层纳米金,接着自组装一层L-半胱氨酸,对修饰电极表面功能化,引入氨基和羧基,增加蛋白质印迹识别位点,以BHb为模板,采用电化学诱导的丙烯酰胺氧化还原聚合反应形成分子印迹聚合物层,模板蛋白分子经洗脱形成分子印迹电化学传感器。其产生的电化学信号的变化与BHb的质量浓度在1.0~1.0×103 mg·L~(-1)范围有直接的关系,检出限(3σ)达0.5mg·L~(-1)。这种新型传感器具有较高灵敏度,可用于目标蛋白的识别。     

多壁碳纳米管-分子印迹传感器测定盐酸克伦特罗

结合碳纳米材料和分子印迹技术,建立了以K3[Fe(CN)6]为探针测定盐酸克伦特罗的方法。以邻苯二胺为功能单体,盐酸克伦特罗为模板,采用电化学聚合法在多壁碳纳米管修饰电极表面制备了分子印迹薄膜。用乙腈水溶液可快速去除模板,得到多壁碳纳米管-分子印迹传感器。用循环伏安法、交流阻抗法和石英晶体微天平技术对印迹膜进行了表征,膜厚为12.3 nm。K3[Fe(CN)6]的相对峰电流与盐酸克伦特罗的浓度在4.0×10-8～6.6×10-6 mol/L范围内呈线性关系,检测限为8.1×10-9 mol/L。选择性实验表明传感器对结构类似物具有较强的抗干扰能力。此传感器可用于猪肉中盐酸克伦特罗的测定,加标回收率为101.3%～107.9%。     

基于石墨烯掺杂金纳米粒子的速灭威分子印迹电化学传感器

以速灭威(MTMC)为模板分子,甲基丙烯酸(MAA)为功能单体,马来松香丙烯酸乙二醇酯(EGMRA)为交联剂,在石墨烯掺杂金纳米粒子修饰玻碳电极表面合成分子印迹膜,研制了测定MTMC的分子印迹电化学传感器。采用扫描电镜(SEM)对传感膜的形貌进行了表征,通过循环伏安法(CV)、电化学阻抗谱法(EIS)和差示脉冲伏安法(DPV)对传感器的性能进行了研究。DPV测试表明,MTMC的浓度在1.0×10-7~1.0×10-4mol/L范围内呈现良好的线性关系(线性相关系数为R=0.9936),检出限2.9×10-8mol/L(S/N=3)。传感器应用于蔬菜样品的加标回收检测,回收率在93.4%~106.4%之间。     

基于电化学聚合技术的分子印迹化学传感器研究进展

作为传感器中最重要的研究方向之一,分子印迹传感器在近十年的发展中取得了巨大进展。分子印迹聚合物膜在转换器表面的固定化方法有涂膜法、原位引发聚合法和电化学聚合法等,其中电聚合法因具有制备简单快速、膜厚可控、膜与电极附着紧密、重现性好等优点而成为极具潜力的制备方法。该文评述了基于电化学聚合技术的分子印迹传感器的主要研究进展,对聚合膜制备过程中单体的选择和模板的去除进行了讨论,对电聚合制备的印迹传感器在传感领域的分析应用进行了总结,并在此基础上对其未来发展进行了展望。     

分子印迹电化学传感器测定L-色氨酸的研究

报道了一种由溶胶-凝胶法制备的分子印迹电化学传感器,并用于L-色氨酸的测定.印迹聚合物是由四乙氧基硅烷、甲基三甲氧基硅烷、苯基三甲氧基硅烷等聚合而成,L-色氨酸为模板分子.通过循环伏安法验证了印迹膜与模板分子的结合和去除.该传感器对L-色氨酸具有良好的选择性以及高的灵敏度,线性范围为1.0×10-9～1.0×10-5m...     

以马来松香丙烯酸乙二醇酯为交联剂的咖啡因分子印迹电化学传感器

以咖啡因为模板分子, 含菲环骨架的马来松香丙烯酸乙二醇酯为交联剂, 甲基丙烯酸为功能单体, 在玻碳电极表面以自由基热聚合的方式制备分子印迹聚合物敏感膜, 构建了测定咖啡因的新型分子印迹膜电化学传感器. 通过循环伏安法、 差分脉冲伏安法及电化学交流阻抗法研究了传感器对咖啡因的响应特性. 结果表明, 在最佳的实验条件下, 传感器的峰电流与咖啡因浓度在3.00×10^-3~2.73 mmol/L范围内呈现良好的线性关系, 检出限(S/N=3)为1.12×10^-4 mmol/L. 传感器具有良好的选择性和重现性. 将该传感器用于可口可乐饮料中咖啡因含量的测定, 平均回收率为98.7%.     

Theoretical and experimental research on the self‐assembled system of molecularly imprinted polymers formed by salbutamol and methacrylic acid

The quantum chemical method was applied for screening functional monomers in the rational design of salbutamol‐imprinted polymers. Salbutamol was the template molecule, and methacrylic acid was the single functional monomer. The LC‐WPBE/6–31G(d,p) method was used to investigate the geometry optimization, active sites, natural bond orbital charges, binding energies of the imprinted molecule, and solvation energy. The mechanism of action between salbutamol and methacrylic acid was also discussed. The theoretical results show that salbutamol interacts with functional monomers by hydrogen bonds, and the salbutamol‐imprinted polymers with a ratio of 1:4 (salbutamol/methacrylic acid) in acetonitrile had the highest stability. The salbutamol‐imprinted polymers were prepared by precipitation polymerization. The experimental results indicated that the maximum adsorption capacity for salbutamol toward molecularly imprinted polymers was 7.33 mg/g, and the molecularly imprinted polymers had a higher selectivity for salbutamol than for norepinephrine and terbutaline sulfate. Herein, the studies can provide theoretical and experimental references for the salbutamol molecular imprinted system.     

Towards the development of a portable sensor based on a molecularly imprinted membrane for the rapid determination of salbutamol in pig urine

A new type of conductometric probe based on a molecularly imprinted membrane (MIM) for the detection of salbutamol has been designed and fabricated. The probe consists of two parallel screen-printed electrodes (SPE). One of the SPEs was coated with a molecularly imprinted membrane using salbutamol as the template, and the other was modified with a non-molecularly imprinted membrane (N-MIM). Measurements of salbutamol were conducted after the conductometric probe had been connected to a commercial portable conductometer. Multi-sample or successive detections could be easily accomplished by replacing the one-off SPE coated with the salbutamol molecularly imprinted membrane with a new one. The conductometric response of the sensor to the concentration of salbutamol displayed a linear correlation over a range from 50 to 280 nM, with a detection limit of 13.5 nM. The recoveries reached 92.1-98.3% based on pig urine samples. In addition, the sensor based on this new type of probe demonstrated high sensitivity and selectivity for salbutamol.     

基于分子印迹电聚合膜的褪黑素传感器的研究

在弱酸条件下,以邻苯二胺为功能单体,褪黑素为模板,以电化学聚合物法在铂电极表面合成了性能稳定的褪黑素分子印迹聚合物膜.采用循环伏安法(CV)和差分脉冲法(DPV)对分子印迹传感器的识别性能进行了研究.结果表明:此传感器对褪黑素具有快的响应、良好的选择性和高的灵敏度.以K3Fe(CN)6为电子传递媒介,建立了一种差分脉冲伏安法(DPV)间接检测褪黑素的分析方法.在1×10-10～1×10-8 moL/L范围内,褪黑素的浓度与K3Fe(CN)6的相对峰电流变化呈良好的线性关系;检出限为1×10-11 mol/L(S/N=3).将此传感器应用于复合褪黑素及尿样中褪黑素含量的测定,加标平均回收率大于94％.     

基于分子印迹膜修饰丝网印刷电极的地西泮电化学传感器

以地西泮为模板分子,采用循环伏安法在一次性丝网印刷电极表面原位电聚合形成聚邻苯二胺膜,洗脱除去模板分子后得到地西泮分子印迹膜修饰丝网印刷电极。利用差示脉冲法对印迹膜和非印迹膜进行评价,表征了电极表面膜的电化学性质。以KI为印迹电极和底液间的探针,建立了一种间接检测地西泮的传感方法。该传感器的敏感元件为修饰有分子印迹膜的丝网印刷电极,其制备和更换非常方便。用于电化学检测时,样品的富集时间为3min,地西泮的浓度在2.0×10-7～1.0×10-5mol/L范围内与峰电流呈良好的线性关系,检出限为2.5×10-8mol/L,基于猪肉样品的加标回收率为92%～95%。将该传感器初步用于实际样品分析,结果满意。     

三氯生分子印迹传感器的制备及其性能研究

应用分子印迹技术, 以邻苯二胺为功能单体、三氯生为模板, 用循环伏安法在玻碳电极表面合成了性能稳定的三氯生分子印迹聚合膜, 并用方波伏安法对此印迹传感器进行了分析应用研究.     

分子印迹电化学传感器检测水杨酸

以水杨酸(SA)为模板分子,邻苯二胺(o-PPD)及吡咯(Py)为复合功能单体,在石墨烯修饰的玻碳电极表面制备分子印迹电化学传感器(MIP/GO/GCE),用扫描电镜(SEM)观察印迹膜的表面形貌,方波伏安法(SWV)和循环伏安法(CV)对分子印迹传感器的性能进行表征。通过优化实验条件,显示SA浓度在1.0×10-8~1.0×10-2 mol/L范围内,分子印迹传感器峰电流与SA浓度负对数具有良好的线性关系,检出限为8.6×10-9 mol/L。该传感器对SA具有良好的选择性,样品回收率为101%~106%,相对标准偏差(RSD)为3.8%。SA分子印迹传感器的制备简单、抗干扰性好、灵敏度高、成本低廉,具有较好实用价值。     

Determination of Oxytetracycline with a Gold Electrode Modified by Chitosan-Multiwalled Carbon Nanotube Multilayer Films and Gold Nanoparticles

A molecularly imprinted electrochemical sensor was fabricated based on a gold electrode modified by chitosan-multiwalled carbon nanotube composite (CS-MWCNTs) multilayer films and gold nanoparticles (AuNPs) for convenient and sensitive determination of oxytetracycline (OTC). The multilayer of CS-MWCNTs composites and AuNPs were used to augment electronic transmission and sensitivity. The molecularly imprinted polymers (MIPs) were synthesized using OTC as the template molecule and o-phenylenediamine (OPD) as the functional monomer. They were modified on a gold electrode by electropolymerization. The electrochemical behavior of OTC at the imprinted sensor was characterized by cyclic voltammetry (CV), scanning electron microscopy (SEM), and amperometry. The molecularly imprinted sensor showed high selectivity and excellent stability toward OTC. The linear range was from 3.0 × 10^?8 to 8.0 × 10^?5 mol/L, with a limit of detection (LOD) of 2.7 × 10^?8 mol/L (S/N = 3). The developed sensor showed good recovery in spiked samples analysis.     

金属螯合物印迹聚邻苯二胺膜的电化学合成及表征

以邻苯二胺(o-PD)为功能单体, 乙二胺四乙酸铜离子螯合物(Cu(II)-EDTA)为模板分子, 利用循环伏安法(CV)合成了Cu(II)-EDTA分子印迹聚合物(MIPs). 通过紫外-可见(UV-Vis)光谱、X射线光电子能谱(XPS)、差分脉冲伏安法(DPV)、石英晶体微天平(QCM)等手段对合成的聚合物进行了表征. UV-Vis光谱分析表明当溶液的pH≥5.0时有利于邻苯二胺电聚合形成聚合度较高的聚合物; XPS结果证明Cu(II)-EDTA螯合物被成功地包覆在聚合物膜中, 且推断出模板分子和聚合物之间可能主要靠氢键相互作用; DPV实验结果证明模板分子能够被有效洗脱; QCM的测试结果表明此方法合成的Cu(II)-EDTA印迹聚合物膜对Cu(II)-EDTA具有良好的响应度.     

基于抗原决定基的胰岛素分子印迹电化学传感器

采用抗原决定基法制备了胰岛素电化学分子印迹传感器.以胰岛素C端多肽作为模板分子,定向自组装在Au电极上,以邻苯二胺为功能单体,电化学聚合制备分子印迹聚合膜.以NaOH为洗脱液,洗脱模板分子,形成的与胰岛素C端多肽三维结构相匹配的分子印迹孔穴能特异性识别胰岛素.重吸附胰岛素分子后,以K3[Fe(CN)6]/K4[Fe(CN)6]为探针,通过测量探针在电极表面产生的电流大小实现胰岛素的间接测定.在1.0 × 10-14~5.0 × 10-13 mol/L浓度范围内,传感器的电流响应值与胰岛素浓度呈良好的线性关系,检出限为7.24 × 10-15 mol/L(3σ).此传感器具有较好的选择性和稳定性,并成功用于血清样品中胰岛素的测定.     

Novel method for the rapid and specific extraction of multiple β2‐agonist residues in food by tailor‐made Monolith‐MIPs extraction disks and detection by gas chromatography with mass spectrometry

A quick and specific pretreatment method based on a series of extraction clean‐up disks, consisting of molecularly imprinted polymer monoliths and C₁₈ adsorbent, was developed for the specific enrichment of salbutamol and clenbuterol residues in food. The molecularly imprinted monolithic polymer disk was synthesized using salbutamol as a template through a one‐step synthesis process. It can simultaneously and specifically recognize salbutamol and clenbuterol. The monolithic polymer disk and series of C₁₈ disks were assembled with a syringe to form a set of tailor‐made devices for the extraction of target molecules. In a single run, salbutamol and clenbuterol can be specifically extracted, cleaned, and eluted by methanol/acetic acid/H₂O. The target molecules, after a silylation derivatization reaction were detected by gas chromatography‐mass spectrometry. The parameters including solvent desorption, sample pH, and the cycles of reloading were investigated and discussed. Under the optimized extraction and clean‐up conditions, the limits of detection and quantitation were determined as 0.018–0.022 and 0.042–0.049 ng/g for salbutamol and clenbuterol, respectively. The assay described was convenient, rapid, and specific; thereby potentially efficient in the high‐throughput analysis of β₂‐agonists residues in real food samples.