Use of hydrolyzed chlorosilanes for the preparation of high resolution glass capillary columns

Summary A new procedure for the preparation of high resolution open tubular glass capillary columns is described. This procedure involves the preparation of polysiloxane polymers obtained by alkaline hydrolysis of alkyl chlorosilane. The mixture of polysiloxane polymers is then coated on the wall of previously HCl treated glass capillary columns using a dynamic method. A base-catalysed reaction using gaseous ammonia, applied to the coated polymers leads to a stable chemically bonded stationary phase, with non-polar characteristics. This type of column is easier to prepare than conventional ones and exhibits excellent chromatographic properties, both with regard to their resolution, stability and reproducibility. The flexibility of this method permits the use of other types of commercially available chlorosilanes (i.e. methylphenyl chlorosilane) to prepare polar polysiloxane polymers suitable for analysis of complex biochemical mixtures, such as steroid metabolites.     

以衍生化聚硅氧烷为固定相的开管毛细管电色谱柱的研制

建立了一种简单可行的制备衍生化聚硅氧烷开管毛细管电色谱柱的方法,石英毛细管无需浸蚀,直接键合上大分子的聚硅氧烷,用异丁烯酸丁酯和乙烯基磺酸衍生化时对苯的同系物有很好的分离能力,对甲苯柱效可达1.52×10⁵N/m(N为理论塔板数),柱效稳定;当用烯丙基全甲基β-环糊精和乙烯基磺酸衍生化时,石英毛细管先经溶胶-凝胶处理后,所制得的柱子对萘普生对映体的分离度可达0.81.     

Synthesis of an enantiomerically pure resorcinarene with pendant l-valine residues and its attachment to a polysiloxane (Chirasil-Calix)

The synthesis of a new enantiomerically pure resorcinarene by reaction of all resorcinic groups with N-bromoacetyl-l-valine-tert-butyl-amide is described. The chiral macrocyclic product was chemically bonded to a poly(hydro)dimethylsiloxane by hydrosilylation using a platinum catalyst. The resulting chiral polysiloxane Chirasil-Calix can be used as chiral stationary phase (CSP) in capillary gas chromatography.¹     

Comparison of monolithic silica and polymethacrylate capillary columns for LC

Organic polymer monolithic capillary columns were prepared in fused-silica capillaries by radical co-polymerization of ethylene dimethacrylate and butyl methacrylate monomers with azobisisobutyronitrile as initiator of the polymerization reaction in the presence of various amounts of porogenic solvent mixtures and different concentration ratios of monomers and 1-propanol, 1,4-butanediol, and water. The chromatographic properties of the organic polymer monolithic columns were compared with those of commercial silica-based particulate and monolithic capillary and analytical HPLC columns. The tests included the determination of H-u curves, column permeabilities, pore distribution by inversed-SEC measurements, methylene and polar selectivities, and polar interactions with naphthalenesulphonic acid test samples. Organic polymer monolithic capillary columns show similar retention behaviour to chemically bonded alkyl silica columns for compounds with different polarities characterized by interaction indices, Ix, but have lower methylene selectivities and do not show polar interactions with sulphonic acids. The commercial capillary and analytical silica gel-based monolithic columns showed similar selectivities and provided symmetrical peaks, indicating no significant surface heterogeneities. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra-column contributions. With 0.3 mm ID capillary columns, corrections for extra-column volume contributions are sufficient, but to obtain true information on the efficiency of 0.1 mm ID capillary columns, the experimental bandwidths should be corrected for extra-column contributions to peak broadening.     

Simultaneous coupling of capillary supercritical fluid chromatography and high temperature glass capillary gas chromatography to a mass spectrometer

The coupling of glass capillary supercritical fluid chromatography to a high temperature GC/MS system via a micrometeradjustable glass capillary interface including an integrated pressure restrictor is described. With this coupling device, both complementary capillary chromatographic methods retain their full independence and flexibility. It is shown that in supercritical fluid chromatography glass fulfils all the requirements of a suitable support material. The preparation of narrow bore glass capillary columns (0.06 mm i.d.), coated with chemically bonded and crosslinked fluids with a film thickness of about 0.6 μm, which exploit the merits of OHterminated polysiloxanes as stationary phases is discussed. The application of glass capillary SFC is demonstrated and compared with examples given in the literature.     

开管柱固定化葡萄糖氧化酶反应器的制备及其在流动注射分析中的应用

本文将葡萄糖氧化酶化学键合到粗糙化的玻璃毛细管内壁上,用开管柱固定化酶反应器-安培检测器进行葡萄糖的流动注射分析。讨论了流速对流动注射分析体系峰电流和分散度的影响,提出了测量开管柱固定化酶表观活力的方法。     

Preparation and Characterization of Sol-Gel SE-30-Coated Silica Stationary Phase for Capillary Liquid Chromatography

A sol-gel chemistry-based polymer coating approach was developed for the preparation of a novel polysiloxane-coated silica stationary phase for capillary liquid chromatography. SE-30, a commercial polysiloxane stationary phase used in gas chromatography, was incorporated into the properly designed sol solution. Then the sol-gel mixture was introduced into a silica gel-packed capillary column by pressure. A thin film of sol-gel SE-30-coating is chemically bonded to the surface of silica gel particles by hydrolytic polycondensation under mild conditions without any free radical cross-linking procedures, therefore the sol-gel approach offers a simple and effective pathway to create a hybrid polymer-coated silica stationary phase. Various factors affecting column making were optimized and discussed in this report. The resulting stationary phase showed good permeability, mechanical robustness, high durability to alkaline mobile phase and satisfactory chromatographic performance in separations of polar and non-polar aromatic compounds. Linear solvation energy relationships (LSERs) studies indicate that the stationary phase has a reversed-phased character with SE-30 providing chromatographic functionality. The solute size and the solute hydrogen bond ability are major factors that principally govern the retention of test solutes.     

Copolymers of methyl methacrylate with some benzanthrone dyes, photo-stabilisers and their combined structures

Copolymerisation of methyl methacrylate with nine novel monomer compounds, triazinyl benzanthrone dyes, triazinyl benzotriazole stabilisers and their combined structures, was investigated. Chemical bonding of the compounds in the polymers obtained was confirmed spectrophotometrically. The quantity of the chemically bonded monomer compounds was determined to be over 50%, providing a colour and a fluorescence stable to solvents. Their influence on the rate of the copolymerisation was studied. It was found that the compounds under study did not significantly affect the rate of copolymerisation. A stabilizing effect towards photo-degradation of PMMA was achieved at 0.1 wt.% initial concentration of the compounds, which made them suitable for “one-step” colouration and stabilisation of PMMA.     

Synthesis of dendron-protected porphyrin wires and preparation of a one-dimensional assembly of gold nanoparticles chemically linked to the pi-conjugated wires

A one-dimensional assembly of gold nanoparticles chemically bonded to pi-conjugated porphyrin polymers was prepared on a chemically modified glass surface and on an undoped naturally oxidized silicon surface by the following methods: pi-conjugated porphyrin polymers were prepared by oxidative coupling of 5,15-diethynyl-10,20-bis-((4-dendron)phenyl) porphyrin (6), and its homologues (larger than 40-mer) were collected by analytical gel permeation chromatography (GPC). The porphyrin polymers (>40-mer) were deposited using the Langmuir-Blodgett (LB) method on substrate surfaces, which were then soaked in a solution of gold nanoparticles (2.7 +/- 0.8 nm) protected with t-dodecanethiol and 4-pyridineethanethiol. The topographical images of the surface observed by tapping mode atomic force microscopy (AFM) showed that the polymers could be dispersed on both substrates, with a height of 2.8 +/- 0.5 nm on the modified glass and 3.1 +/- 0.5 nm on silicon. The height clearly increased after soaking in the gold nanoparticle solution, to 5.3 +/- 0.5 nm on glass and 5.4 +/- 0.7 nm on silicon. The differences in height (2.5 nm on glass and 2.3 nm on silicon) corresponded to the diameter of the gold nanoparticles bonded to the porphyrin polymers. The distance between gold nanoparticles observed in scanning electron microscopic images was ca. 5 nm, indicating that they were bonded at every four or five porphyrin units.     

聚硅氧烷共聚改性环氧树脂

综述了聚硅氧烷共聚改性环氧树脂的方法、机理及研究进展。     

A thin cover glass chip for contactless conductivity detection in microchip capillary electrophoresis

A microfabricated thin glass chip for contactless conductivity detection in chip capillary electrophoresis is presented in this contribution. Injection and separation channels were photolithographed and chemically etched on the surface of substrate glass, which was bonded with a thin cover glass (100 μm) to construct a new microchip. The chip was placed over an independent contactless electrode plate. Owing to the thinness between channel and electrodes, comparatively low excitation voltage (20–110 V in V_p–p) and frequency (40–65 kHz) were suitable, and favorable signal could be obtained. This microchip capillary electrophoresis device was used in separation and detection of inorganic ions, amino acids and alkaloids in amoorcorn tree bark and golden thread in different buffer solutions. The detection limit of potassium ion was down to 10 μmol/L. The advantages of this microchip system exist in the relative independence between the microchip and the detection electrodes. It is convenient to the replacement of chip and other operations. Detection in different position of the channel would also be available.     

Chemically modified electrodes: Part IV. Evidence for formation of monolayers of bonded organosilane reagents

Organosilane reagents have been used under anhydrous reaction conditions to modify chemically the surfaces of SnO₂, TiO₂ and glassy carbon electrodes, and soft glass. Measurements of thickness of the resultant chemically bonded organosilane layers by E.S.C.A. intensity comparisons, and of coverage (mol cm^?2) by electrochemical and optical experiments, are compatible with considering the bonded layers as primarily monomolecular as opposed to a multilayer surface polymer. As part of the study, the escape depth of Si 2p photoelectrons in an organosilane matrix was measured and compared to a theoretical prediction.     

Flexible soft glass capillary columns vs. flexible fused silica capillary columns for gas chromatography-a critique

The gas chromatographic use of flexible thin walled soft glass capillary columns coated with non-polar stationary phases is compared to similar columns made of fused silica glass. With non-polar soft glass columns, the use of surface roughening viagaseous HCI followed by a Carbowax 20 M pretreatment gave adsorptive phenomena, and thermal instability. With very polar soft glass columns where a variety of cyanopropyl silicone phases were coated directly onto the NaCI crystal matrix, adsorptive effects were again prominent and frequent break-down in film stability with time, was also observed. These undesirable effects were due to the presence of metal oxides in the soft glass. Attempts to remove these materials from the thin walled soft glass surface by means of acid leaching produced significant brittleness. This deleterious result was further increased by attempts at high temperature silylation or polysiloxane deactivation. In sharp contrast, the fused silica surface was essentially free of metal oxides and the surface silanol groups are easily neutralized by silylation or polysiloxane deactivation techniques. No brittleness was observed following these procedures. An increasing series of high molecular weight, viscous, polymeric vinyl containing non-polar and highly polar stationary phases have been produced which readily wet the surface of the fused silica and are easily crosslinked in the presence of free radical generators. These columns are essentially free of all the problems noted with flexible thin walled soft glass. When all of the parameters involved in the fabrication of a glass capillary column are assessed, it appears at this time, that the flexible fused silica glass column with cross linked phases approaches the “ideal” capillary column.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Analysis of Seven Herbicides by Gas-Liquid Chromatography

Simutaneous analysis of seven commonly used herbicides, 2,4-D methyl ester, 2,4-D methyl ester, 2,4,5-T methyl ester, silvex methyl ester, ramrod, CIPC and DEF, by gas-liquid chromatography with an electron capture detector was attempted. Two packed columns (which are generally used for the analysis of chlorinated pesticides) and two chemically bonded fused silica capillary columns were used for the analysis. When the packed columns were used, ramrod always interfered with the analysis of 2,4-D methyl ester and/or silvex methyl ester. Complete separation with reasonable analysis time can be achieved using one of the chemically bonded fused silica capillary columns.     

Preparation and characterization of chemically bonded aramid-titania hybrids using isocyanatopropyltrimethoxysilane

Transparent aramid based titania hybrid films have been prepared by the sol–gel process. A mixture of m- and p-phenylenediamines was reacted with terephthaloyl chloride forming aromatic polyamide chains in dimethylacetamide solvent. The titania network was generated insitu in this matrix by the hydrolysis and condensation of the various amounts of tetraethylorthotitanate. Hybrid films with concentrations of titania varying from 2.5 to 12.5 wt% were prepared; the higher percentages of titania in the organic matrix showed a tendency towards phase separation. These films were tested for their thermo-mechanical properties. To achieve a further improvement in properties of the matrix, the aramid chain was functionalized and the inorganic network was chemically bonded using isocyanatopropyltrimethoxysilane. The bonded hybrids showed a narrower distribution of titania particles and these were distributed as a co-continuous phase. The glass transition temperature (Tg) of the hybrid films measured through dynamic mechanical analysis showed a relatively higher increase with inclusion of titania in the covalently bonded hybrids. The maximum value of Tg noted in the chemically bonded composites with 12.5 wt% titania was 361 °C and the storage modulus value was 5.214 GPa at 100 °C, showing an increase of 62 % over the pure polymer. The hybrid films with titania showed an improved UV-stability as compared to the pure polymer.     

A novel method of preparing of glass capillary columns: Low-temperature plasma etching and polymerization

A novel method is described for the preparation of stable glass capillary columns (glass open tubular columns), including the etching and formation of a polymer film on the inner glass capillary surfaces. The approach used here is based on low-temperature plasma etching and polymerization. Under the influence of a field of radio frequency discharge, low pressure gases of fluoric compounds, introduced into the glass capillary tube, generate excited fluorine radicals which etch the inner surface. The plasma of organosilicone monomer in the glass capillary yields a uniform polymerized film on the inner surface. The resultant material functions as a good stationary phase for glass capillary gas chromatography (GC²). The inner surfaces treated with such a plasma, can be studied by means of a scanning electron microscope (SEM). The flexibility of this method permits the use of various stationary phases and surface modification.     

Integration of on-column catalysis and EKC analysis: investigation of enantioselective sulfoxidations

A novel technique is presented to investigate catalytic reactions by coupling a fused-silica capillary coated with an immobilized catalyst and a bare fused-silica capillary to achieve separation of the reaction products and to generate an electroosmotic flow, which drives the transport of the reactants and products through the catalytically active capillary. The principle of this technique is illustrated by the enantioselective sulfoxidation of benzylphenylsulfide with hydrogen peroxide to the corresponding sulfoxide in the presence of a vanadium(IV)-salen catalyst, which is immobilized to nonpolar polysiloxane and permanently bonded to the inner surface of the reaction capillary. The enantiomeric ratio of the reaction product is simultaneously determined by electrokinetic chromatography using 150 mg/mL sulfated β-cyclodextrin as chiral additive in 10 mM sodium dihydrogenphosphate background electrolyte at pH 8.3. In contrast to conventional enantioselective sulfoxidations of benzylphenylsulfide using the vanadium(IV)-salen catalyst, which give ees of up to 11%, an ee of up to 23% was achieved by this approach. Furthermore, the presented technique offers many more advantages, such as improved substrate selectivity using the nonpolar polysiloxane phase as a solvent, the feasibility to perform high-throughput kinetic measurements of substrate libraries, rapid screening and investigation of stereolabile compounds, that is, chiral sulfoxides, and screening of reactions using only minute amounts of reagents.     

A high resolution GC-analysis method for determination of C2-C10 hydrocarbons in air samples

An analytical method for the determination of non-methane hydrocarbons (NMHC) in air was developed using simultaneously pressure and temperature programmed gas chromatography (GC) on a capillary column. The separation of C2-C10 hydrocarbons was performed in a single GC-run using a fused silica capillary column (FSCC) with a chemically bonded non-polar stationary phase (CP-Sil-5-CB). A combination of on-column cryofocusing and GC reinjection provided baseline separation of C2 hydrocarbons at subambient initial temperature (?40°C). The cryofocusing was performed on the column head immersed in liquid nitrogen. Quantitative retention of all C2-C10 hydrocarbons was achieved only when a temperature gradient is created along the cooled column section. The focused components are eluted from the column head without supplementary heating by removing the coolant. To eliminate matrix effects, the enrichment procedure was designed to remove CO₂ and H₂O. The detection limit was found to be 2.0 × 10^?12 g propane.     

Plasticization mechanism in polybenzimidazole membranes for organic solvent nanofiltration: Molecular insights from in situ FTIR spectroscopy

Despite substantial research efforts being devoted to design polymer membranes for organic solvent nanofiltration (OSN) exhibiting enhanced plasticization resistance, detailed studies of membrane structural stability in chemically challenging environments are rare. This study sets forth a multiscale method, which combines in situ FTIR measurements in the transmission mode with sorption and transport measurements, to investigate the molecular mechanism of polymer plasticization upon exposure to organic species. We recently reported that polybenzimidazole (PBI), a polymer that has been considered for OSN application, experiences severe plasticization upon exposure to methanol. FTIR measurements suggest that the mechanism of PBI plasticization relies on competitive hydrogen bonding. According to this mechanism, methanol molecules disrupt the hydrogen bonded network characteristic of dry PBI, by forming mutual polymer/penetrant hydrogen bonds, which enhances polymer chain mobility and favors polymer plasticization. The analysis of the isosteric heat of sorption supports the picture sketched above. The method developed in this study can be readily extended to many other systems of practical interest in membrane science, to shed fundamental light on the phenomenon of plasticization, whose molecular aspects are still largely unknown. Equally important, this study provides some useful guidelines to design OSN membrane materials.