三元添加剂水溶液体系合成亚微米硫化锌空心球

利用仿生合成方法,通过加入一定量的引发剂使甲基丙烯酸原位聚合,在聚乙二醇(PEG)、聚甲基丙烯酸(PMAA)和十二烷基硫酸钠(SDS)的三元添加剂混合溶液体系中控制了合成硫化锌晶体,提出了一种简单易行的合成硫化锌空心球的新方法.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线粉末衍射(XRD)及紫外吸收光谱等手段对合成样品的形貌、结构及性能进行了表征.TEM结果显示,ZnS空心球的直径约为300～400nm,其壳层的厚度约为50nm.SEM结果显示,空心球的外壳是由初级纳米粒子定向熔合排列形成的蠕虫状结构紧密组装而成.由于相应的胶束结构的改变,表面活性剂SDS浓度的变化明显改变了ZnS产物的形貌,在较高浓度的SDS溶液中得到了ZnS片状晶体的球形聚集体.利用核-壳机理初步解释了空心球结构的形成过程.     

制备核-壳结构聚合物纳米微球和空心球的原位聚合方法的普适性研究

采用原位聚合制备核-壳结构聚合物纳米微球和空心球的新方法, 利用甲基丙烯酸2-羟丙酯(HPMA)和乙酸乙烯酯(VAc)两种单体, 在类似的反应条件下, 成功地制备了以聚(ε-己内酯)(PCL)为核, 分别以交联PHPMA和PVAc为壳的纳米微球; 将微球的核酶解后, 分别得到了对应的交联PMAA空心球和交联PVA空心球. 结果表明, 原位聚合制备核-壳结构聚合物微球的新方法具有一定的普适性, 适用于单体可溶于水而生成的聚合物不溶于水的体系.     

一种具有核-壳结构的聚合物纳米胶粒的制备及其药物运载性能

以丙烯酸异丁酯(IBA)、甲基丙烯酸二甲氨乙酯(DMAEMA)、丙烯酸羟乙酯(HEA)作为聚合单体,利用种子微乳液聚合制备了一种具有核-壳结构的聚合物纳米胶粒P(DMAEMA-co-IBA)/P(IBA-co-HEA);采用红外光谱仪、动态激光光散射仪、透射电镜分析了所得胶粒的结构和形貌;将叶酸成功嵌入聚合物胶粒,得到直径约293nm的球形载药胶粒,利用药物体外释放测定了药物运载性能.结果表明,所制备的共聚物纳米胶粒呈球形,直径约275nm,粒径分布较窄,并具有核-壳结构;其对药物具有缓释性和pH响应性.     

以手性两亲小分子自组装体为模板制备介孔二氧化硅空心球

合成了手性阳离子型两亲性小分子化合物,利用圆二色谱分析了其在水中形成的自组装体的结构;以该化合物的自组装体为模板,在正丙醇和氨水的混合溶剂中制备得到了介孔二氧化硅空心球;利用扫描电镜、透射电镜、X射线衍射仪以及氮气吸附-脱附试验装置分析了二氧化硅空心球的形貌及孔结构.结果表明,两亲性小分子在水中形成的自组装体呈现手性堆积;合成的介孔二氧化硅空心球的直径约为600~800nm,壁厚约为100~150nm,其孔道垂直于球的表面,孔径约为3.0nm,比表面积约为306m2·g-1.正丙醇作为模板控制二氧化硅空心球的空腔尺寸和形貌,而两亲性小分子的自组装体作为模板控制放射状孔道的形貌和尺寸.     

微米聚苯胺/Fe_3O_4空心球的制备及吸波性能

采用界面聚合和Pickering乳液聚合相结合的方法,以甲苯为软模板,磁性Fe3O4纳米颗粒为稳定剂,十二烷基苯磺酸钠(SDBS)为乳化剂,过硫酸铵(APS)为氧化剂,盐酸(HCl)为掺杂剂,制备了掺杂态聚苯胺/Fe3O4(D-PANI/Fe3O4)空心球.作为比较,在不掺杂盐酸的条件下,制备了本征态聚苯胺/Fe3O4(PANI/Fe3O4)空心球.用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射(XRD)仪、傅里叶变换红外光谱(FTIR)仪、热重分析(TG)仪、振动样品磁强(VSM)计及恒压四探针测试仪对复合材料的形貌、结构、组成和电磁性能进行了表征.结果表明,D-PANI/Fe3O4空心球的直径约为2.8μm,电导率和饱和磁化强度(Ms)分别为2.75×10-2S/cm和54.26 A·m2/kg.用矢量网络分析(VNA)仪对D-PANI/Fe3O4空心球和PANI/Fe3O4空心球吸波性能进行分析,结果表明,D-PANI/Fe3O4空心球在12.64 GHz处的最小反射率为-43.3 d B,对应的匹配厚度为2 mm,其吸波性能明显优于PANI/Fe3O4空心球.     

胆固醇分子印迹聚合有机凝胶的制备及其选择性吸附研究

以N-十八烷基马来酰胺酸(ODMA)为凝胶剂,在甲基丙烯酸β-羟乙酯、甲基丙烯酸、聚乙二醇二甲基丙烯酸酯和模板分子3-胆固醇酰氧基丙酸(COPA)混合物中自组装形成稳定的超分子有机凝胶,经UV原位光聚合,乙腈提取模板分子制备了胆固醇非共价印迹聚合有机凝胶.吸附实验在水/THF中进行.结果显示胆固醇非共价印迹聚合有机凝胶...     

纳米MoS2空心球的制备与表征

采用软模板法,通过添加十六烷基三甲基氯化铵(CTAC)作为模板剂,制得纳米MoS2空心球。采用SEM、TEM、XRD以及EDS等表征最终产物的形貌和化学成分,并基于CTAC和最终产物的FTIR光谱图,讨论了纳米MoS2空心球的形成机理。结果表明:产物为直径约30～100nm壁厚为10nm的空心球,结晶度较差,但可通过退火加以改善。在纳米MoS2空心球的形成过程中,CTAC不仅仅是作为模板剂和脚手架,还参与了化学反应生成中间体沉淀,并在此过程中,初步形成了核壳结构。     

交联度对原位聚合法制备聚合物胶束性质的影响及相应的空心球制备

用原位聚合法成功地制备出不同响应温度的温敏性聚乳酸/聚(异丙基丙烯酰胺-co-丙烯酰胺)[P(D,L-LA)/P(NIPAM-co-AM)]核壳胶束. 实验中发现, 壳层的交联剂含量对粒子的尺寸有很大的影响, 当交联剂的摩尔分数从5%提高到15%时, 粒子在25 ℃时的流体力学直径从170.2 nm增加到886.5 nm. 通过对胶束粒子的核进行生物降解, 方便地得到了相应的空心球. 用FTIR监测核的降解过程, 用SEM和AFM检测核降解完全后粒子的外在形貌和内在结构变化. DLS结果表明, 空心球粒子同样具有良好的温度响应性, 其响应温度可通过改变原位聚合时单体AM的含量加以调节.     

水热法制备多层核壳结构Gd_2O_3:Eu~(3+)空心微球

以稀土硝酸盐-葡萄糖的混合溶液作为前驱体,采用一步水热法和随后的热处理得到了多层核壳结构Gd_2O_3:Eu~(3+)空心微球,并用X-射线衍射(XRD)、场发射扫描电镜(FESEM)、透射电镜(TEM)、X-射线能量色散光谱(EDS)和荧光光谱等测试手段对所得样品进行了表征.结果表明:所得空心球样品为纯的立方相的Gd_2O_3.具有规则的多层核壳空心结构,空心球的直径在2～3μm左右,壁厚约为100 nml,并且Gd_2O_3:Eu~(3+)空心球是由尺寸约为30 nm的球形纳米颗粒白组装而成.样品中含有Gd、Eu、O元素.该空心球样品具有强的Eu~(3+)的特征红光发射以及长的荧光寿命,可以用来作为时间分辨荧光标记物.     

三维有序SiC空心球的制备及表征

以三维有序多孔碳为模板, 以聚甲基硅烷(PMS)为前驱体, 经过前驱体的渗入、交联和陶瓷转化以及多孔碳模板的烧除, 制备了长程三维有序SiC空心球. 所制备的SiC空心球的外径(135-896 nm)、 球壳厚度(14-79 nm)、 BET比表面积(50.8～5.0 m2/g)及微孔体积(0.265～0.038 cm3/g)受不同孔径的多孔碳模板(150-1 000 nm)或不同前驱体浓度的控制. 所制备的SiC空心球以hcp结构排列成长程三维有序的序列.     

PAMAM树形分子为模板低温制备纳米硫化锌空心球

Hollow ZnS spheres have been prepared in the presence of generation 3.5 poly (amidoamine) dendrimers with surface ester groups (G3.5-COOCH3 PAMAM dendrimer) as synthetic matrix template. The products obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis absorption. TEM studies show that the hollow spheres with diameters ranging from 80 to 100 nm are prepared. The range of wall thickness was estimated to be about 20～30 nm. It was found that the concentration of PAMAM dendrimer had a significant influence on the formation of hollow ZnS spheres. The possible formation mechanism of the hollow spherical structure is also discussed.     

Sonochemical preparation of hollow nanospheres and hollow nanocrystals

Ceramic hollow spheres of MoS2 and MoO3 were obtained by sonochemical synthesis of MoS2 and MoO3 templated on silica nanoparticles (diameters 50-500 nm) followed by acid etching to remove the silica core. The resulting hollow materials have been characterized by elemental analysis, XPS, SEM, TEM, optical absorption, and hydrodesulfurization (HDS) studies. The TEM studies on the hollow ceramic materials indicate the formation of dispersed free spheres with a hollow core. The hollow materials obtained from thermally treated MoS2/SiO2 (450-700 degrees C) show the formation of layered MoS2 (lattice fringes approximately 6.2 A) with a wall thickness of 6-8 layers. The MoS2 hollow spheres are extremely active catalysts for the HDS of thiophene. Hollow spheres of MoO3 are prepared in a similar fashion. Surprisingly, upon heating, hollow crystals of MoO3 with sharp-edged truncated cubes containing inner voids are formed from the initial spheres.     

Preparation and characterization of silver/TiO2 composite hollow spheres

Silver-coated poly(methyl acrylic acid) (PSA) core-shell colloid particles were prepared by an in situ chemical reduction method. Crystalline silver/titania composite hollow spheres were obtained by coating the as-prepared PSA/silver particles with an amorphous titania layer and subsequently calcining in Ar atmosphere. SEM and TEM investigation indicated that the size of the as-prepared PSA/silver and PSA/silver/TiO(2) core-shell particles and silver/titania composite hollow particles was fairly uniform and the wall thickness of the hollow spheres was in the range of 40-80 nm. UV-vis absorption spectra were recorded to investigate their optical properties.     

Mutifuntional GdPO4:Eu3+ hollow spheres: synthesis and magnetic and luminescent properties

Mondispersed submicrometer GdPO(4):Eu(3+) hollow spheres were synthesized via an effective one-pot hydrothermal process. These hollow spheres have the average diameter of 200 nm, and the shell thickness is about 20 nm. The surface of the spheres consists of a number of nanorods with diameters of about 10 nm and lengths of about 50-80 nm. Both magnetic and luminescent properties of the obtained Eu(3+)-doped GdPO(4) hollow spheres were investigated. The hysteresis plot (M-H) analysis result indicates their paramagnetic property. The fluorescence spectra demonstrate that they emit orange-red color light originated from the (5)D(0) → (7)F(J) transitions of the Eu(3+) ions. Therefore, the obtained GdPO(4) hollow spheres hold promise for encapsulate drugs with controlled release. Moreover, the GdPO(4):Eu(3+) hollow spheres are attributes for bimodal magnetic resonance imaging (MRI)/optical bioimaging labeling.     

SnO2 hollow spheres:Polymer bead-templated hydrothermal synthesis and their electrochemical properties for lithium storage

SnO2 hollow spheres have been synthesized via a facile hydrothermal method using sulfonated polystyrene beads as a template followed by a calcination process in air.X-ray diffraction,scanning electron microscopy,and transmission electron microscopy show that the as-obtained SnO2 hollow spheres have a wall thickness of about 50 nm,and consist of nanosized SnO2 particles with a mean diameter of about 15 nm.Electrochemical measurements indicate that the SnO2 hollow spheres exhibit improved electrochemical performance in terms of specific capacity and rate capability in comparison with commercial SnO2 when used as anode materials for lithium-ion batteries.The enhanced performance may be attributed to the spherical and hollow structure,as well as the building blocks of SnO2 nanoparticles.     

苯胺与吡咯共聚物空心球的自组装制备及性能

以碱性溶液为反应介质,苯胺和吡咯为单体,采用稀释聚合法制备苯胺-吡咯共聚物自组装空心微球.研究了搅拌条件、共聚单体摩尔比、聚合反应介质和聚合时间对共聚物形貌的影响.采用扫描电子显微镜、透射电子显微镜、红外光谱、广角X射线衍射、热重分析仪和四探针技术表征了共聚物的形貌、结构和性能.研究结果表明,聚合反应条件对共聚物的形貌有重大影响,通过调整聚合反应条件,可以实现共聚物形貌的有效调控.共聚单体总摩尔浓度为0.05 mol/L,氨水溶液作为反应介质,在静态条件下反应24 h可以得到尺寸均一、平均外直径为610～863 nm,壳厚144～162 nm的自组装共聚物空心微球.同时,研究了共聚物对银离子的吸附性能,结果表明共聚物对银离子有还原作用,吸附后共聚物表面有纳米银的生成.