White up-conversion emission in Ho/Tm/Yb tri-doped glass ceramics embedding BaF2 nanocrystals

Ho³⁺/Tm³⁺/Yb³⁺ tri-doped glass ceramics with white light emitting have been developed and demonstrated. Pumped by 980 nm laser diode (LD), intensive red, green and blue up-conversions (UC) were obtained. The green emission is assigned to Ho³⁺ ion and the blue emission is assigned to Tm³⁺ ion, whereas the red emission is the combination contribution of the Ho³⁺ and Tm³⁺ ions. The RGB intensities could be adjusted by tuning the rare-earth ion concentration and pump power intensity. Thus, multicolor of the luminescence, including perfect white light with CIE-X=0.329 and CIE-Y=0.342 in the 1931 CIE chromaticity diagram can be obtained in 0.15 Ho³⁺/0.2Tm³⁺/3Yb³⁺ tri-doped glass ceramics embedding BaF₂ nanocrystals pumped by a single infrared laser diode source of 980 nm at 500 mW. The up-conversion luminescence mechanism of Yb³⁺ sensitize Ho³⁺ and Tm³⁺ ions and the energy transfer from Ho³⁺ to Tm³⁺ in oxy-fluoride silicate glass ceramics were analyzed.     

Energy transfer between doubly doped Er, Tmand Ho rare earth ions in SiO2 nanoparticles

Preparation of Er³⁺, Ho³⁺ and Tm³⁺ ions co-doped SiO₂ nanoparticle phosphor powders by sol gel method is reported. The morphology and the particle size of the SiO₂ host matrix were confirmed by field emission scanning electron microscopy (FESEM). Ultraviolet, visible (UV/VIS) and cathodoluminescence measurements were carried out in order to investigate the optical properties of our powder phosphors. Green emissions at 520 nm from Er³⁺ and 544 nm from Ho³⁺, and red emissions at 665 nm from both Er³⁺ and Ho³⁺ ions are reported. Another emission peak in the near infra-red (NIR) region at 875 nm from Er³⁺ was also measured. Blue emission at 460 nm, red at 705 nm and a NIR peak in the region of 865 nm from Tm³⁺ were observed. Red, green and blue (RGB) colours were measured from both SiO₂:Er³⁺,Tm³⁺ and SiO₂:Ho³⁺,Tm³⁺ systems. The change in the intensities of the emission peaks in both the SiO₂:Ho³⁺,Tm³⁺ and SiO₂:Er³⁺,Tm³⁺ systems with the change in accelerating beam voltage is shown. Energy transfer from Tm³⁺ ions to Er³⁺ and Ho³⁺ ions was observed. A mechanism explaining the increase and decrease behaviour of the emission with accelerating beam voltage from both systems is reported.     

Emission analysis of Pr and Tm: Ca2Gd2W3O14 phosphors

5 mol% of Pr³⁺ and Tm³⁺ ions activated calcium gadolinium tungstate (Ca₂Gd₂W₃O₁₄₎ phosphors were synthesized by traditional solid state reaction method. Crystalline phase structure was identified from the X-ray diffraction (XRD) profiles. From the scanning electron microscopy (SEM) images, we have observed the agglomeration of the particles, and average grain size is around 40-300 nm. Using the energy dispersive X-ray analysis (EDAX) and Fourier transform infrared (FTIR) spectra, identified the elements and functional groups present in the prepared phosphors. The emission spectrum of Pr³⁺: Ca₂Gd₂W₃O₁₄ powder phosphors have shown an intense red emission at 615 nm with the excitation wavelength λ_exci=450 nm and thus these red color emitting powder phosphors are used as one of the components in the preparation of WLEDs. The excitation spectrum of Tm³⁺: Ca₂Gd₂W₃O₁₄ powder phosphor has shown a ligand to metal charge transfer (W-O) band (LMCT) within the WO₄²⁻ group. Emission spectrum of Tm³⁺: Ca₂Gd₂W₃O₁₄ phosphors have shown blue emissions at 453 nm (¹D₂→³F₄).     

Low temperature quenching and high efficiency Tm, La or Tb co-doped CaSc2O4:Ce phosphors for light-emitting diodes

Low temperature quenching and high efficiency CaSc₂O₄:Ce³⁺ (CSO:Ce³⁺) phosphors co-doped with Tm³⁺, La³⁺ and Tb³⁺ ions were prepared by a solid state method and the phase-forming, morphology, luminescence and application properties of these phosphors were investigated. The results showed that co-doping of Tm³⁺, La³⁺ and Tb³⁺ ions can improve the luminescence properties and decrease temperature quenching of CSO:Ce³⁺ phosphor remarkably. High efficiency green-light-emitting diodes were fabricated with the prepared phosphors and InGaN blue-emitting (∼460 nm) chips. The good performances of the green-light-emitting LEDs made from co-doped CSO:Ce³⁺ phosphors confirm the luminescence enhancement and indicate that Tm³⁺, La³⁺ and Tb³⁺ co-doped CSO:Ce³⁺ phosphors are suitable candidates for the fabrication of high efficiency white LEDs.     

Up-conversion white light of Tm/Er/Yb tri-doped CaF2 phosphors

Tm³⁺/Er³⁺/Yb³⁺ tri-doped CaF₂ phosphors were synthesized using a hydrothermal method. The phosphors were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and up-conversion (UC) emission spectra. After annealing, the phosphors emitted white light under a 980 nm continuous wave diode laser (CW LD 2 W) excitation. As the excitation power density changed in the range of 20-260 W/cm², the chromaticity coordinates of the UC light of the phosphor Ca_0.885Tm_0.005Er_0.01Yb_0.1F₂ fell well in the white region of the 1931 CIE diagram. For the proportion of red, green and blue (RGB) in white light is strict, key factors for achieving UC white light, such as host materials, rare earth ions doping concentrations, annealing temperatures, as well as the excitation power densities, were investigated and discussed.     

Up-conversion emission in triply-doped Ho/Yb/Tm KGd(WO4)2 single crystals

Detailed spectroscopic studies of the triply doped KGd(WO₄)₂:Ho³⁺/Yb³⁺/Tm³⁺ single crystals (which exhibit multicolor up-conversion fluorescence) are reported for the first time. The absorption spectra of crystals were measured at 10 and 300 K; the room temperature luminescence spectra were excited at 980 nm wavelength. The dependence of the intensity of luminescence on the excitation power for three different concentration of Ho³⁺, Yb³⁺ and Tm³⁺ ions was investigated. Efficient green and red up-converted luminescence of Ho³⁺ ions and weak blue up-conversion luminescence of Tm³⁺ ions were observed in spectra. The red emission of Ho³⁺ ions is more intensive than their green emission. Dependence of the up-conversion luminescence intensity on the excitation power and impurities concentration was also studied; the number of phonon needed for efficient up-conversion was determined for each case. All possible energy transfer processes between different pairs of the impurity ions' energy levels are also discussed.     

Role of Al2O3 in upconversion and NIR emission in Tm and Er codoped calcium fluoro phosphorous silicate glass system

In this study, the principal role of Al₂O₃ on the features of the photoluminescence spectra of Tm³⁺ ion and upconversion phenomenon in Tm³⁺ and Er³⁺ codoped CaF₂−Al₂O₃−P₂O₅−SiO₂ glass system has been investigated. The concentration of Al₂O₃ is varied from 2 to 10 mol% while that of Er³⁺ and Tm³⁺ is fixed. IR and Raman spectral studies have indicated that there is a gradual increase in the degree of disorder in the glass network with increase in the concentration of Al₂O₃ up to 6.0 mol%. This is attributed to the presence of Al³⁺ ions in octahedral positions in larger proportions. When the glasses are doped with Tm³⁺ ions, the blue and red emissions were observed, whereas in Er³⁺ doped glasses blue, green and red emissions were observed. When the glasses are codoped with Tm³⁺ and Er³⁺ ions and excited at 790 nm, all the three emission lines were observed to be reinforced, especially in the glasses mixed with 6.0 mol% of Al₂O₃. The IR emission band detected at about 1.8 μm due to ³F₄→³H₆ transition of Tm³⁺ ions is also observed to be strengthened due to codoping. The reasons for enhancement in the intensity of various emission bands due to codoping have been identified and discussed with the help of rate equations for various emission transitions.     

Luminescence efficiencies of self- and Tm activated CaWO4 under vacuum ultraviolet radiation excitation

Luminescence efficiency of self-activated CaWO₄ under 147 nm vacuum ultraviolet (VUV) radiation excitation is about 90% of that of BaMgAl₁₀O₁₇:Eu²⁺ (BAM), the commercial blue plasma display panel (PDP) phosphor. However, the color purity and the particle size of the former needs substantial modification before it can be considered for application in PDP. CaWO₄:Tm exhibits Tm³⁺ emission peaks in the blue region due to energy transfer from WO₄ to Tm³⁺ ions but the overall emission intensity under 147 nm excitation is reduced when compared to that of CaWO₄.     

VUV spectroscopy of pure and Tm-doped LicaAlF6 crystals

Nominally pure and Tm³⁺-doped LiCaAlF₆ crystals were grown by the Czochralski technique in a reducing atmosphere. The optical properties of transparent single crystals were studied using absorption and time-resolved luminescence spectroscopy in the VUV spectral range (330-100 nm). The strongest VUV emission peaking at 60 800 cm⁻¹ with a decay time of 5.6 μs (7 μs) at 300 K (7.4 K) was assigned to the spin-forbidden 4f¹¹5d-4f¹² transition of Tm³⁺. The fine structure observed in the VUV emission and corresponding excitation spectra indicate intermediate strength of electron-phonon coupling in this system. The efficient excitation of f-f emissions above 72 000 cm⁻¹, higher than the onset of f-d absorption at 63 000 cm⁻¹, is mainly caused by the F⁻ to Tm³⁺ charge transfer absorption. The nature of various host-related excitation processes in the energy transfer to the Tm³⁺ ions is discussed.     

The effect of different gas atmospheres on luminescent properties of pulsed laser ablated SrAl2O4:Eu,Dy thinfilms

SrAl₂O₄:Eu²⁺,Dy³⁺ thin films were grown on Si (1 0 0) substrates using the pulsed laser deposition (PLD) technique to investigate the effect of vacuum, oxygen (O₂) and argon (Ar) deposition atmospheres on the structural, morphological, photoluminescence (PL) and cathodoluminescence (CL) properties of the films. The films were ablated using a 248 nm KrF excimer laser. Atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS) and fluorescence spectrophotometry were used to characterize the thin films. Auger electron spectroscopy (AES) combined with CL spectroscopy were employed for the surface characterization and electron-beam induced degradation of the films. Better PL intensities were obtained from the unannealed films prepared in Ar and O₂ atmospheres with respect to those prepared in vacuum. A stable green emission peak at 515 nm, attributed to 4f⁶5d¹→4f⁷ Eu²⁺ transitions were obtained with less intense peaks at 619 nm, which were attributed to transitions in Eu³⁺. After annealing the films prepared in vacuum at 800 °C for 2 h, the intensity of the green emission (520 nm) of the thin film increased considerably. The amorphous thin film was crystalline after the annealing process. The CL intensity increased under prolonged electron bombardment during the removal of C due to electron stimulated surface chemical reactions (ESSCRs) on the surface of the SrAl₂O₄:Eu²⁺, Dy³⁺ thin films. The CL stabilized and stayed constant thereafter.     

Sensitized luminescence through nanoscopic effects of ZnO encapsulated in SiO2:Tb sol gel derived phosphor

Terbium (1 mol%) doped ZnO-SiO₂ binary system was prepared by a sol-gel process. Nanoscopic effects of ZnO on the photoluminescence (PL) and the cathodoluminescence (CL) properties were studied. Defects emission from ZnO nanoparticles was measured at 560 nm and the line emission from Tb³⁺ ions in SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺ with a major peak at 542 nm was measured. The PL excitation wavelength for 542 nm Tb³⁺ emission was measured at ∼320 nm in both SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺. The CL data showed quenched luminescence of the ZnO nanoparticles at 560 nm from a composite of ZnO-SiO₂:Tb³⁺ and a subsequent increase in 542 nm emission from the Tb³⁺ ions. This suggests that energy was transferred from the ZnO nanoparticles to enhance the green emission of the Tb³⁺ ions. The PL and CL properties of ZnO-SiO₂:Tb³⁺ binary system and possible mechanism for energy transfer from the ZnO nanoparticles to Tb³⁺ ions are discussed.     

Sol-gel growth of Gd2MoO6:Eu nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6:Eu) and their luminescent properties

SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors were prepared by the sol-gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors. The XRD results demonstrate that the Gd₂MoO₆:Eu³⁺ layers on the SiO₂ spheres begin to crystallize after annealing at 600 °C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 600 nm), are not agglomerated, and have a smooth surface. The thickness of the Gd₂MoO₆:Eu³⁺ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). The Eu³⁺ shows a strong PL luminescence (dominated by ⁵D₀-⁷F₂ red emission at 613 nm) under the excitation of 307 nm UV light. The PL intensity of Eu³⁺ increases with increasing the annealing temperature and the number of coating cycles.     

Auger electron/X-ray photoelectron and cathodoluminescent spectroscopic studies of pulsed laser ablated SrAl2O4:Eu,Dy thin films

Auger electron/X-ray photoelectron and cathodoluminescent (CL) spectroscopic studies were conducted on pulsed laser deposited SrAl₂O₄:Eu²⁺,Dy³⁺ thin films and the correlation between the surface chemical reactions and the decrease in the CL intensity was determined. The Auger electron and the CL data were collected simultaneously in a vacuum chamber either maintained at base pressure or backfilled with oxygen gas. The data were collected when the films were irradiated for 14 h with 2 keV electrons. The CL emission peak attributed to the 4f⁶5d¹ → 4f⁷ transitions was observed at ∼521 nm and the CL intensity of the peaks degraded at different rates in different vacuum conditions. X-ray photoelectron spectroscopy (XPS) data collected from degraded films suggest that strontium oxide (SrO) and aliminium oxide (Al₂O₃) were formed on the surface of the film as a result of electron stimulated surface chemical reaction (ESSCR).     

Spherical Zn2SiO4:Eu@SiO2 phosphor particles in core-shell structure: Synthesis and characterization

Spherical SiO₂ particles have been coated with Zn₂SiO₄:Eu³⁺ phosphor layers by a Pechini sol-gel process. The microstructure and luminescent properties of the obtained Zn₂SiO₄:Eu³⁺@SiO₂ particles were well characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and lifetime. The results demonstrate that the Zn₂SiO₄:Eu³⁺@SiO₂ particles, which have regular and uniform spherical morphology, emitted an intensive red light emission at 613 nm under excitation at 395 nm. Besides, the effects of the Eu³⁺ concentration, annealing temperature and charge compensators of Li⁺ ions on the PL emission intensities were investigated in detail.     

Synthesis and photoluminescence properties of Sm-doped CaWO4 nanoparticles

The Sm³⁺-doped CaWO₄ nanoparticles were synthesized by hydrothermal method. The room temperature photoluminescence (PL) spectra of Sm³⁺-doped CaWO₄ nanoparticles doped with different Sm³⁺ concentrations under 405 nm excitation have been investigated. The PL spectra showed four strong emission peaks at 460, 571, 609, and 653 nm. The first emission peak at 460 nm could be due to a structural defect of the lattice, an oxygen-deficient WO₃ complex. The other three emissions at 571, 609, and 653 nm were due to the f-f forbidden transitions of the 4f electrons of Sm³⁺, corresponding to ⁴G_5/2→⁶H_5/2 (571 nm), ⁶H_7/2 (609 nm), and ⁶H_9/2 (653 nm), respectively. In addition, the optimum Sm³⁺ concentration in CaWO₄ nanoparticles for optical emission was determined to be 1.0%. The Sm³⁺⁴G_5/2→⁶H_7/2 (609 nm) emission intensity of Sm³⁺-doped CaWO₄ nanoparticles significantly increased with the increase of Sm³⁺ concentration, and showed a maximum when Sm³⁺ doping content was 1.0%. If Sm³⁺ concentration continued to increase, namely more than 1.0%, the Sm³⁺⁴G_5/2→⁶H_7/2 emission intensity would decrease. The present materials might be a promising phosphor for white-light LED applications.     

Population inversion between the H4 and the F4 excited states of Tm investigated by means of numerical solutions of the rate equations system in Tm-doped and Tm, Ho-codoped fluoride glasses

Population inversion between the ³H₄ and the ³F₄ excited states of Tm³⁺ ions responsible for the 1.5 μm emission in Tm³⁺ singly doped (0.5%) and Tm³⁺, Ho³⁺-codoped fluoride (ZBLAN) glasses and its dependence on the Ho³⁺ concentration (x=0.2-1%) was investigated by means of numerical solution of the rate equations system for continuous pumping at 797 nm. Mean lifetimes of donor and acceptor states were evaluated by using the integration method applied to the best fitting of fluorescence curves previously reported. Lifetime values were used to obtain the rate constants of all non-radiative energy-transfer processes involved and a complete set of rate equations better describing the observations was given. The rate equations were solved by numerical method and the population inversion between the ³H₄ and the ³F₄ excited states of Tm³⁺ was calculated to examine the beneficial effects on the gain associated with Ho³⁺ codoping. The results have shown that Tm³⁺ population inversion is reached only for high Ho³⁺-codoping (?0.3 mol%). Highest population inversion (∼1.6×10¹⁸ Tm³⁺ ions cm⁻³) was obtained in Tm(0.5%), Ho(1%)-codoped (ZBLAN) pumped by 2.8 kW cm⁻². This population inversion density is ∼6.4 times higher than that one observed in Tm:Tb:GLKZ, Tm:Tb:Ge-Ga-As-S-CsBr and Tm:Ho:Ge-Ga-As-S-CsBr for a similar pumping condition (∼2.5×10¹⁷ cm⁻³). In addition, Tm(0.5%):Ho(1%):ZBLAN presents the highest population inversion that linearly increases with the pumping intensity; this behavior does not show saturation effect at least for the maximum intensity of 12 kW cm⁻² employed. The use of 1 mol% of Ho³⁺-codoping maximizes the potential gain of Tm³⁺-doped (0.5%) ZBLAN to produce stimulated emission near 1.5 μm, making this material suitable for using it as fiber optical amplifier and/or fiber laser operating in 1.4-1.5 μm region of the spectrum.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Synthesis and luminescence properties of nanocrystalline Gd2O3:Eu by combustion process

The nanocrystalline Gd₂O₃:Eu³⁺ powders with cubic phase were prepared by a combustion method in the presence of urea and glycol. The effects of the annealing temperature on the crystallization and luminescence properties were studied. The results of XRD show pure phase can be obtained, the average crystallite size could be calculated as 7, 8, 15, and 23 nm for the precursor and samples annealed at 600, 700 and 800 °C, respectively, which coincided with the results from TEM images. The emission intensity, host absorption and charge transfer band intensity increased with increasing the temperature. The slightly broad emission peak at 610 nm for smaller particles can be observed. The ratio of host absorption to O²⁻-Eu³⁺ charge transfer band of smaller nanoparticles is much stronger compared with that for larger nanoparticles, furthermore, the luminescence lifetimes of nanoparticles increased with increasing particles size. The effects of doping concentration of Eu³⁺ on luminescence lifetimes and intensities were also discussed. The samples exhibited a higher quenching concentration of Eu³⁺, and luminescence lifetimes of nanoparticles are related to annealing temperature of samples and the doping concentration of Eu³⁺ ions.     

Luminescence of Ce and Pr doped Sr2Mg(BO3)2 under VUV-UV and X-ray excitation

This report presents the luminescence properties of Ce³⁺ and Pr³⁺ activated Sr₂Mg(BO₃)₂ under VUV-UV and X-ray excitation. The five excitation bands of crystal field split 5d states are observed at about 46 729, 44 643, 41 667, 38 314 and 29 762 cm⁻¹ (i.e. 214, 224, 240, 261 and 336 nm) for Ce³⁺ in the host lattice. The doublet Ce³⁺ 5d→4f emission bands were found at about 25 840 and 24 096 cm⁻¹ (387 and 415 nm). The influence of doping concentration and temperature on the emission characteristics and the decay time of Ce³⁺ in Sr₂Mg(BO₃)₂ were investigated. For Pr³⁺ doped samples, the lowest 5d excitation band was observed at about 42017 cm⁻¹ (238 nm), a dominant band at around 35714 cm⁻¹ (280 nm) and two shoulder bands were seen in the emission spectra. The excitation and emission spectra of Ce³⁺ and Pr³⁺ were compared and discussed. The X-ray excited luminescence studies show that the light yields are ∼3200±230 and ∼1400±100 photons/MeV of absorbed X-ray energy for the samples Sr_1.86Ce_0.07Na_0.07Mg(BO₃)₂ and Sr_1.82Pr_0.09Na_0.09Mg(BO₃)₂ at RT, respectively.     

Photoluminescence and energy transfer of Tm doped LiIn (WO4)2 blue phosphors

Room temperature steady and time resolved emission spectra of LiIn_1−xTm_x(WO4)2 (where thulium concentration is 0, 0.5, 1, 5 and 10 at%) blue phosphors, under UV excitation energy have been investigated. The concentration quenching effect on the blue emission, due to the (WO₄)⁻² groups and ¹G₄→³H₆ emission transition of Tm³⁺ were studied. Two energy transfer mechanisms are shown. The first takes place between excited (WO₄)⁻² groups and the ¹G₄ energy level of Tm³⁺, and is mainly analyzed by phonon-assisted energy transfer. The second mechanism is due to an energy transfer from the excited Tm³⁺ ions to the surrounding ground state Tm³⁺ ions. The non-exponential decay curves of the ¹G₄ level observed for higher concentrations are analyzed by the Inokuti–Hirayama model. We think that the quenching effect between Tm³⁺ ions is mainly linked to the dipole–dipole interactions.