Tripodal bis(imidazole) thioether copper(I) complexes: mimics of the Cu(M) site of copper hydroxylase enzymes

Tripodal bis(imidazole) thioether ligands, (N-methyl-4,5-diphenyl-2-imidazolyl)2C(OR)C(CH3)2SR' (BIT(OR,SR'); R = H, CH3; R' = CH3, C(CH3)3, C(C6H5)3), have been prepared, offering the same N2S donor atom set as the CuM binding site of the hydroxylase enzymes, dopamine beta hydroxylase and peptidylglycine hydroxylating monooxygenase. Isolable copper(I) complexes of the type [(BIT(OR,SMe))Cu(CO)]PF6 (3a and 3b) are produced in reactions of the respective tripodal ligands 1a (R = H) and 1b (R = Me) with [Cu(CH3CN)4]PF6 in CH2Cl2 under CO (1 atm); the pyramidal structure of 3a has been determined crystallographically. The infrared (IR) nu(CO)'s of 3a and 3b (L = CO) are comparable to those of the Cu(M)-carbonylated enzymes, indicating similar electronic character at the copper centers. The reaction of [(BIT(OH,SMe))Cu(CH3CN)]PF6 (2a) with dioxygen produces [(BIT(O,SOMe))2Cu2(DMF)2](PF6)2 (4), whose X-ray structure revealed the presence of bridging BIT-alkoxo ligands and terminal -SOMe groups. In contrast, oxygenation of 2b (R = Me) affords crystallographically defined [(BIT(OMe,SMe))2Cu2(mu-OH)2](OTf)2 (5), in which the copper centers are oxygenated without accompanying sulfur oxidation. Complex 5 in DMF is transformed into five-coordinate, mononuclear [CuII(BIT(OMe,SMe))(DMF)2](PF6)2 (6). The sterically hindered BIT(OR,SR') ligands 9 and 10 (R' = t-Bu; R = H, Me) and 11 and 12 (R' = CPh3; R = H, Me) were also prepared and examined for copper coordination/oxygenation. Oxygenation of copper(I) complex 13b derived from the BIT(OMe,SBu-t) ligand is slow, relative to 2b, producing a mixture of (BIT(OMe,SBu-t))2Cu2(mu-OH)2-type complexes 14b and 15b in which the -SBu-t group is uncoordinated; one of these complexes (15b) has been ortho-oxygenated on a neighboring aryl group according to the X-ray analysis and characterization of the free ligand. Oxygenation of the copper(I) complex derived from BIT(OMe,SCPh3) ligand 12 produces a novel dinuclear disulfide complex, [(BIT(OMe,S)2Cu2(mu-OH)2](PF6)2 (17), which is structurally characterized. Reactivity studies under anaerobic conditions in the presence of t-BuNC indicate that 17 is the result of copper(I)-induced detritylation followed by oxygenation of a highly reactive copper(I)-thiolate complex.     

Equilibrium studies of the reactions of palladium(II) bis(imidazolin-2-imine) complexes with biologically relevant nucleophiles. The crystal structures of [(TLtBu)PdCl]ClO4 and [(BLiPr)PdCl2

The kinetics and the mechanism of the substitution reactions of the complex [(TL(tBu))PdCl](+), where TL(tBu) is 2,6-bis[(1,3-di-tert-butylimidazolin-2-imino)methyl]pyridine, with nucleophiles (guanosine-5'-monophosphate (5'-GMP), l-Methionine (l-Met) and l-Histidine (l-His)) were studied using variable-temperature stopped-flow techniques in aqueous 0.1 M NaClO(4) with 10 mM NaCl at 298 K. The order of reactivity is: l-Met > 5'-GMP > l-His. The formation equilibria of [(BL(iPr))Pd(H(2)O)(2)](2+), where BL(iPr) is 1,2-bis(1,3diisopropyl-4,5-dimethylimidazolin-2-imino)ethane, and [(TL(tBu))Pd(H(2)O)](2+) with some biologically relevant ligands (l-Met, 5'-GMP and l-His) were also studied. The stoichiometry and stability constants of the newly formed complexes are reported, and the concentration distribution of the various complex species has been evaluated as a function of pH. Comparing the values of logβ(1,1,0) for 5'-GMP, l-His and l-Met complexes, the most stable complex is with 5'-GMP followed by l-His and l-Met for both complexes, [(BL(iPr))Pd(H(2)O)(2)](2+) and [(TL(tBu))Pd(H(2)O)](2+). The crystal structures of [(TL(tBu))PdCl]ClO(4) and [(BL(iPr))PdCl(2)] were determined by X-ray diffraction. The coordination geometries around the palladium atoms are distorted square-planar, with the Pd-N1 distance to the central nitrogen atom of the TL(tBu) ligand, 1.944(2) ?, being shorter than those to the other two nitrogen atoms of TL(tBu), viz. 2.034(3) and 2.038(2) ?. The BL(iPr) complex displays similar Pd-N distances of 2.031(2) and 2.047(2) ?.     

Copper complexes of nitrogen-anchored tripodal N-heterocyclic carbene ligands

Incorporation of a nitrogen functionality into a tripodal N-heterocyclic carbene ligand system affords the first N-anchored tetradentate tris-carbene ligands TIMEN(R) (R = Me (5a), t-Bu (5b), Bz (5c)). Treatment of the methyl derivatized [H(3)TIMEN(Me)](PF(6))(3) imidazolium salt (H(3)5a) with silver oxide yields the silver complex [(TIMEN(Me))(2)Ag(3)](PF(6))(3) (9), which, in a ligand transfer reaction, reacts with copper(I) bromide to give the trinuclear copper(I) complex [(TIMEN(Me))(2)Cu(3)](PF(6))(3) (10). Deprotonation of the tert-butyl and benzyl derivatives [H(3)TIMEN(t-Bu)](PF(6))(3) and [H(3)TIMEN(Bz)](PF(6))(3) yields the free tris-carbenes TIMEN(t-Bu) (5b) and TIMEN(Bz) (5c), which react readily with copper(I) salts to give mononuclear complexes [(TIMEN(t-Bu))Cu](PF(6)) (11b) and [(TIMEN(Bz))Cu]Br (11c). The solid-state structures of 10, 11b, and 11c were determined by single-crystal X-ray diffraction. While the TIMEN(Me) ligand yields trinuclear complex 10, with both T-shaped three-coordinate and linear two-coordinate copper(I) centers, the TIMEN(t-Bu) and TIMEN(Bz) ligands induce mononuclear complexes 11b and 11c, rendering the cuprous ion in a trigonal planar ligand environment of three carbenoid carbon centers and an additional, weak axial nitrogen interaction. Complexes 11b and 11c exhibit reversible one-electron redox events at half-wave potentials of 110 and -100 mV vs Fc/Fc(+), respectively, indicating sufficient electronic and structural flexibility of both TIMEN(R) ligands (R = t-Bu, Bz) to stabilize copper(I) and copper(II) oxidation states. Accordingly, a copper(II) NHC complex, [(TIMEN(Bz))Cu](OTf)(2) (12), was synthesized. Paramagnetic complex 12 was characterized by elemental analysis, EPR spectroscopy, and SQUID magnetization measurements.     

Synthesis and reactivity of copper(I) complexes with an ethylene-bridged bis(imidazolin-2-imine) ligand

A series of copper(I) complexes with a sterically hindered, bidentate ligand, BL iPr, derived from an N-heterocyclic carbene precursor have been isolated, characterized and their reactivity studied. The ethylene-bridged bis(imidazolin-2-imine) ligand (BL iPr) provides strongly donating N-donor atoms for the stabilization of a copper(I) metal center, priming it for reactivity. The complexes [(BL iPr)Cu(XyNC)]PF6 (4) and [(BL iPr)CuCl] (5) were characterized by X-ray crystallography and exhibit trigonal coordination at the copper centers. The reactivity of [(BL iPr)Cu]SbF6 toward dioxygen was studied at low temperature, indicating formation of a thermally sensitive intermediate with intense UV/Vis features and an isotope-sensitive vibration at 625 cm(-1) (599 cm(-1) with 18 O2). The intermediate is assigned as containing the bis(mu-oxo)dicopper(III) core, [2](PF6)2, and the related, stable hydroxo form was crystallized as [{(BL iPr)Cu}2(mu-OH)2](PF6)2, [3](PF6)2. The reactivity of 5 as a catalyst for the ATR polymerization of styrene was assessed in terms of reaction kinetics and polymer properties, with low PDI values achieved for polymers with molecular weights up to 30 000 g mol(-1).     

Mononuclear and binuclear copper(I) complexes ligated by bis(3,5-diisopropyl-1-pyrazolyl)methane: insight into the fundamental coordination chemistry of three-coordinate copper(I) complexes with a neutral coligand

By using the neutral bidentate nitrogen-containing ligand, bis(3,5-diisopropyl-1-pyrazolyl)methane (L1' '), the copper(I) complexes [Cu(L1' ')2](CuCl2) (1CuCl2), [Cu(L1' ')2](ClO4) (1ClO4), [Cu(L1' ')]2(ClO4)2 (2ClO4), [Cu(L1' ')]2(BF4)2 (2BF4), [Cu(L1' ')(NCMe)](PF6) (3PF6), [Cu(L1' ')(PPh3)](ClO4) (4ClO4), [Cu(L1' ')(PPh3)](PF6) (4PF6), [{Cu(L1' ')(CO)}2(mu-ClO4)](ClO4) (5ClO4), and the copper(II) complexes [{Cu(L1' ')}2(mu-OH)2(mu-ClO4)2] (6), and [Cu(L1' ')Cl2] (7) were systematically synthesized and fully characterized by X-ray crystallography and by IR and 1H NMR spectroscopy. In the case of copper(II), ESR spectroscopy was also applied. In comparison with the related neutral tridentate ligand L1', bis-chelated copper(I) complexes and binuclear linear-coordinated copper(I) complexes are easy to obtain with L1' ', like 1CuCl2, 1ClO4, 2ClO4, and 2BF4. Importantly, stronger and bulkier ligands such as acetonitrile (3PF6) and especially triphenylphosphine (4ClO4 and 4PF6) generate three-coordinate structures with a trigonal-planar geometry. Surprisingly, for the smaller ligand carbon monoxide, a mononuclear three-coordinate structure is very unstable, leading to the formation of a binuclear complex (5ClO4) with one bridging perchlorate anion, such that the copper(I) centers are four-coordinate. The same tendency is observed for the copper(II) bis(mu-hydroxo) compounds 6, which is additionally bridged by two perchlorate anions. Both copper(II) complexes 6 and 7 were obtained by molecular O2 oxidation of the corresponding copper(I) complexes. A comparison of the new copper(I) triphenylphosphine complexes 4ClO4 and 4PF6 with corresponding species obtained with the related tridentate ligands L1' and L1 (8ClO4 and 9, respectively) reveals surprisingly small differences in their spectroscopic properties. Density functional theory (DFT) calculations are used to shed light on the differences in bonding in these compounds and the spectral assignments. Finally, the reactivity of the different bis(pyrazolyl)methane complexes obtained here toward PPh3, CO, and O2 is discussed.     

Tetra-, di-, and mononuclear copper(I) complexes containing (S,S)-iPr-pybox and (R,R)-Ph-pybox ligands

Tetranuclear [Cu4I4{(S,S)-iPr-pybox}2] (1) and dinuclear [Cu2Cl-{(S,S)-iPr-pybox}2][CuCl2] (2) copper(I) complexes have been synthesized by reaction of iPr-pybox with CuI and CuCl, respectively. Furthermore, dinuclear [Cu2(R-pybox)2][PF6]2 [R-pybox = (R,R)-Ph-pybox (3), (S,S)-iPr-pybox (4)] and mononuclear complexes [Cu(R-pybox)2][PF6] [R-pybox = (R,R)-Ph-pybox (5), (S,S)-iPr-pybox (6)] have been prepared by reaction of [Cu(MeCN)4][PF6] and the corresponding pybox. The structures of complexes 1-3 have been determined by X-ray diffraction analyses.     

Coordination chemistry of the cyclo-(P(5)tBu(4))(-) ion: monomeric and oligomeric copper(I), silver(I) and gold(I) complexes

[Na{cyclo-(P(5)tBu(4))}] (1) reacts with [CuCl(PCyp(3))(2)] (Cyp=cyclo-C(5)H(9)) and [CuCl(PPh(3))(3)] (1:1) to give the corresponding copper(I) complexes with a tetra-tert-butylcyclopentaphosphanide ligand, [Cu{cyclo- (P(5)tBu(4))}(PCyp(3))(2)] (2) and [Cu{cyclo-(P(5)tBu(4))}(PPh(3))(2)] (3). The CuCl adduct of 2, [Cu(2)(mu-Cl){cyclo-(P(5)tBu(4))}(PCyp(3))(2)] (4), was obtained from the reaction of 1 with [CuCl(PCyp(3))(2)] (1:2). Compounds 2 and 3 rearrange, even at -27 degrees C, to give [Cu(4){cyclo- (P(4)tBu(3))PtBu}(4)] (5), in which ring contraction of the [cyclo-(P(5)tBu(4))](-) anion has occurred. The reaction of 1 with [AgCl(PCyp(3))](4) or [AgCl(PPh(3))(2)] (1:1) leads to the formation of [Ag(4){cyclo-(P(4)tBu(3))PtBu}(4)] (6). Intermediates, which are most probably mononuclear, "[Ag{cyclo-(P(5)tBu(4))}(PR(3))(2)]" (R=Cyp, Ph) could be detected in the reaction mixtures, but not isolated. Finally, the reaction of 1 with [AuCl(PCyp(3))] (1:1) yielded [Au{cyclo-(P(5)tBu(4))}(PCyp(3))] (7), whereas an inseparable mixture of [Au(3){cyclo-(P(5)tBu(4))}(3)] (8) and [Au(4){cyclo-(P(4)tBu(3))PtBu}(4)] (9) was obtained from the analogous reaction with [AuCl(PPh(3))]. Complexes 3-7 were characterised by (31)P NMR spectroscopy, and X-ray crystal structures were determined for 3-9.     

Copper(I) complexes of fluorinated triazapentadienyl ligands: synthesis and characterization of [N[(C3F7)C(Dipp)N]2]CuL (where L = NCCH3, CNBut, CO; Dipp = 2,6-diisopropylphenyl)

Sterically demanding triazapentadiene [N[(C3F7)C(Dipp)N]2] H has been synthesized in good yield. It features a W-shaped ligand backbone in the solid state. [N[(C3F7)C(Dipp)N]2]H reacts with copper(I) oxide in acetonitrile leading to [N[(C3F7)C(Dipp)N]2]CuNCCH3. This copper adduct serves as an excellent precursor to obtain thermally stable [N[(C3F7)C(Dipp)N]2]CuCNBut and [N[(C3F7)C(Dipp)N]2]CuCO. IR spectroscopic data of these copper(I) isocyanide (CN = 2176 cm(-1)) and copper(I) carbonyl (CO = 2109 cm(-1)) complexes indicate that the [N[(C3F7)C(Dipp)N]2]- ligand is a fairly weak donor.     

Copper(I) complexes of tripodal tris(imidazolyl) ligands: potential mimics of the Cu(A) site of hydroxylase enzymes

Copper(I) complexes of tripodal tris(N-methyl-4,5-diphenyl-imidazolyl)methane ligands, N3CR (1a-c, R = OH, OMe, H), have been prepared as models for the Cu(A) site of copper hydroxylase enzymes. In the absence of additional donors, the ligands 1 react with [Cu(CH3CN)4]PF6 (2) to produce dinuclear complexes [(N3CR)2Cu2](PF6)2 (3) in which the tripodal ligands bridge two trigonal Cu centers; the structures of 3b and 3c are established by X-ray diffraction. Mononuclear adducts [(N3CR)CuL]Z are produced with L = acetonitrile (4), carbon monoxide (5), and t-BuNC (6, 7). The carbonyl complexes 5 are in dynamic equilibrium with the dimeric complexes 3, but 5c (R = H) can be isolated. The structures of the isocyanide derivatives depend critically on the tripod methane substituent, R. Thus, the X-ray structures of 6 (R = OMe) and 7 (R = H) show trigonal and tetrahedral geometries, respectively, with bi- or tridentate coordination of the tripod. A trinuclear complex [Cu3(N3COH)2(t-BuNC)2](PF6)3 (8) is formed from N3COH (1a) which features both three-coordinate and two-coordinate Cu atoms and bidentate tripod coordination. Reactions of dioxygen with dinuclear 3c or mononuclear [(N3CR)CuL]Z are sluggish, producing from the latter in acetone [(N3CH)CuII(L)(L')](PF6)2 (9, L = acetone, L' = H2O).     

Solution behavior and structural properties of Cu(I) complexes featuring m-terphenyl isocyanides

The synthesis of the m-terphenyl isocyanide ligand CNAr (Mes2) (Mes = 2,4,6-Me 3C 6H 2) is described. Isocyanide CNAr (Mes2) readily functions as a sterically encumbering supporting unit for several Cu(I) halide and pseudo halide fragments, fostering in some cases rare structural motifs. Combination of equimolar quantities of CNAr (Mes2) and CuX (X = Cl, Br and I) in tetrahydrofuran (THF) solution results in the formation of the bridging halide complexes (mu-X) 2[Cu(THF)(CNAr (Mes2))] 2. Addition of CNAr (Mes2) to cuprous chloride in a 2:1 molar ratio generates the complex ClCu(CNAr (Mes2)) 2 in a straightforward manner. Single-crystal X-ray diffraction has revealed ClCu(CNAr (Mes2)) 2 to exist as a three-coordinate monomer in the solid state. As determined by solution (1)H NMR and FTIR spectroscopic studies, monomer ClCu(CNAr (Mes2)) 2 resists tight binding of a third CNAr (Mes2) unit, resulting in rapid isocyanide exchange. Contrastingly, addition of 3 equiv of CNAr (Mes2) to cuprous iodide readily affords the tris-isocyanide species, ICu(CNAr (Mes2)) 3, as determined by X-ray diffraction. Similar coordination behavior is observed in the tris-isocyanide salt [(THF)Cu(CNAr (Mes2)) 3]OTf (OTf = O 3SCF 3), which is generated upon treatment of (C 6H 6)[Cu(OTf)] 2 with 6 equiv of CNAr (Mes2) in THF. The disparate coordination behavior of the [CuCl] fragment relative to both [CuI] and [CuOTf] is rationalized in terms of structure and Lewis acidity of the Cu-containing fragments. The putative triflate species [Cu(CNAr (Mes2)) 3]OTf itself serves as a good Lewis acid and is found to weakly bind C 6H 6 in an eta (1)- C manner in the solid-state. Density Functional Theory is used to describe the bonding and energetics of the eta (1)- C Cu-C 6H 6 interaction.     

Copper(II) chloride complexes with multimodal ligands based on the cyclotriphosphazene platform

The reaction of hexakis(2-pyridyloxy)cyclotriphosphazene (L) and hexakis(4-methyl-2-pyridyloxy)cyclotriphosphazene (MeL) with copper(ii) chloride afford the complexes [CuLCl(2)], [(CuCl(2))(2)(MeL)], [CuLCl]PF(6) and [Cu(MeL)Cl]PF(6). The single-crystal X-ray structure of [CuLCl(2)] shows the copper ion to be in a square based pyramidal distorted trigonal bipyramidal (SBPDTBP) environment (tau= 0.47) with L acting as a kappa(3)N donor, coordinating via the nitrogen atoms from two non-geminal pyridyloxy pendant arms, a nitrogen atom in the phosphazene ring and two chloride ions. In the dimetallic complex, [(CuCl(2))(2)(MeL)], the geometry about both (symmetry related) copper(ii) centres is also SBPDTBP (tau= 0.57) with a 'N(3)Cl(2)' donor set. In the monocation of [CuLCl]PF(6), L acts as a kappa(5)N donor, bonding to the copper(ii) centre through the nitrogen atoms of four pyridyloxy pendant arms, a phosphazene ring nitrogen atom and a chloride ion to give an elongated rhombic octahedral coordination sphere. The phosphazene ring atoms remain virtually coplanar in all three structures as a consequence of the phenoxy-hinge, which links the pyridine pendant donors to the cyclotriphosphazene platform, allowing the formation of six-membered chelate rings. The spectroscopic (mass spectral, EPR and electronic) and magnetic properties of the complexes are discussed. The EPR and variable temperature magnetic susceptibility results for the dicopper complex, [(CuCl(2))(2)(MeL)], point to a very weak electronic interaction between the metal atoms.     

Imidazole substituent effects on oxidative reactivity of tripodal(imid)2(thioether)CuI complexes

In the search for new bis(imidazole)thioether (BIT) copper complexes that accurately mimic the electronic and reactivity features of the CuM site of copper hydroxylase enzymes, a set of tripodal BIT ligands 4a, b- 6a, b has been synthesized that vary according to the imidazole C-(Ph or H) and N-(H or Me) substituents, as well as the position (2- or 4-) of the tripodal attachment. Corresponding [(BIT)Cu(L)](PF6) complexes 7a, b', 8a, b', and 9a', b' [L=CO (a), CH3CN (b)] have been prepared and characterized spectroscopically. The IR spectra of 7a- 9a (L=CO), specifically nu(CO), show little variation (2090-2100 cm(-1)), suggesting a similar electronic character of the Cu centers. In contrast, cyclic voltammetric analysis of these compounds (L=CH3CN) reveals quasi-reversible oxidation waves with significant variation of Epa in the range of + 0.45-0.57 V vs Fc/Fc(+), depending on the imidazole substituents. Each of the [(BIT)Cu(CH 3CN)]PF6 complexes reacts with dioxygen to form [(BIT)Cu(II) 2(mu-OH) 2](PF6)2 derivatives, 10- 12, but they vary considerably in their relative reactivity, following the same trend as the ease of their electrochemical oxidation, that is, [(2-BIT (NMe))Cu(CH 3CN)](+) ( 9b')>[(4-BIT (Ph,NMe))Cu(CH3CN)](+) ( 8b')>[(2-BIT (Ph2,NMe))Cu(CH3CN)](+) (1a')>[(4-BIT (Ph,NH))Cu(CH3CN)](+) (7b'). Thus, N-Me substitution and 4-tethering on the imidazole unit increase oxidation and oxygenation reactivity, while Ph-substitution and 2-tethering decrease reactivity. PM3 and DFT calculations are employed to analyze the relative stability, the electronic features, the Cu-CO vibrtional frequency, and the electrochemical and oxidative reactivity of the complexes.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.     

Tripodal bis(imidazole) thioether copper(I) complexes: mimics of the Cu(B) site of hydroxylase enzymes

Tripodal bis(imidazole) thioether ligands and the corresponding copper(I) complexes [(BIMT-OR)Cu(L)]PF6 [L = CH3CN (2), CO (3); R = H (a), CH3 (b)] have been prepared as models for the Cu(B) site of copper hydroxylase enzymes. The IR (CO) values of 3a and 3b (L = CO) are comparable to those of the carbonylated enzymes. The reaction of 2a with O2 gives dinuclear complex 4 with bridging BIMT-O ligands and oxidized -SMe groups, whereas oxygenation of 2b affords [(BIMT-OMe)2Cu2O(H)2](CF3SO3)2 (5) and Cu(BIMT-OMe)(DMF)2](PF6)2 (6).     

Photochemical synthesis of intensely luminescent isocyano rhenium(I) complexes with readily tunable structural features

A new class of readily tunable isocyano rhenium(I) diimine luminophores, cis,cis-[Re(CO)(2)(CNR)(2)(N-N)](+) (R=2,4,6-Cl(3)C(6)H(2), 4-ClC(6)H(4), 4-Br-2,6-(CH(3))(2)C(6)H(2), 2,6-(CH(3))(2)C(6)H(3), 4-[(CH(3))(2)N]C(6)H(4), 4-(C(6)H(5))C(6)H(4), 4-nBuC(6)H(4), tBu), has been synthesized in high yield by a highly selective photochemical substitution reaction. These complexes were characterized by (1)H NMR and IR spectroscopy, mass spectrometry, and elemental analysis. The X-ray crystal structures of one of the complexes and one of the precursor complexes for the photosubstitution reaction were also determined. As the isocyanide ligands are readily tunable, complexes with excellent solubility in benzene or other nonpolar solvents could be designed through slight modification of the isocyanide ligands with a short nBu substituent. With the characteristic strong infrared absorptions of the carbonyl (C≡O) and isocyanide (C≡N) stretches as well as the high solubility of the reactant and product in benzene, which is the solvent for the photoreaction, the photosubstitution reaction of [Re(CO)(3)(nBuC(6)H(4)NC)(2)Br] with 4,4'-di-tert-butyl-2,2'-bipyridine was also studied by in situ IR spectroscopy. The photophysical and electrochemical properties of these complexes were also investigated. Except for the complex with [(CH(3))(2)N]C(6)H(4)NC ligands, all complexes displayed intense luminescence with quantum yields of up to 0.37 in degassed CH(2)Cl(2) solution at room temperature. These emissions were assigned as the phosphorescence derived from the metal-to-ligand charge transfer [dπ(Re)→π*(N-N)] excited state. The emissive excited states of these complexes have also been characterized by transient absorption spectroscopic studies. The capability of tuning the emissive excited-state energy through the modification of the isocyanide ligands could be reflected by the significant shifting of the phosphorescence from 530 to 620 nm with the same phenanthroline ligand.     

Electronic structure and properties of camphorimine Cu(I) coordination polymers

The first Cu(I) coordination polymer with an aromatic‐substituted camphorimine ligand [(CuCl)(μ‐Cl) (Cu(H₂NC₆H₄NC₁₀H₁₄O)]_n was obtained from reaction of CuCl with 3‐(4‐aminophenylimino)‐1,7,7‐trimethylbicyclo[2.2.1]heptan‐2‐one (H₂NC₆H₄NC₁₀H₁₄O). The electronic and the surface properties (studied by X‐ray photoelectron spectroscopy) are consistent with two distinct coordination environments for the copper(I) atoms—tetrahedral and linear—for the polymer family [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n. DFT band calculations reveal that the highest energy bands are more localized on the copper(I) tetrahedral sites than on the copper(I) linear sites. The redox properties of [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n [Y = NMe₂ ( 2b ), NH₂, and H₂NC₆H₄NC₁₀H₁₄O ( 2a )] studied by cyclic voltammetry show that the oxidation potentials of the two copper centers are in fact indistinguishable. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Homoleptic zinc(II) complexes with first and second coordination shells of 5-tert-butylpyrazole

Reaction of hydrated Zn[NO3]2 or Zn[BF4]2 with four or more equivalents of 3{5}-tert-butylpyrazole (L(tBu)) yields [Zn(L(tBu))4]X2 (X- = NO3- or BF4-). The nitrate complex contains C2-symmetric four-coordinate zinc(II) centers with a slightly flattened tetrahedral geometry, and each nitrate anion hydrogen bonds to two pyrazole N-H groups. Similar reactions with Zn[ClO4]2 or ZnCl2 in the presence of 2 equiv of AgPF6 or AgSbF6 yield instead [{Zn(L(tBu))4}(L(tBu))4][ClO4]2 and [{Zn(L(tBu))4}(L(tBu))2]Y2 (Y- = PF6- or SbF6-). Crystals of [{Zn(L(tBu))4}(L(tBu))4][ClO4]2 are composed of discrete [{Zn(L(tBu))4}(L(tBu))4]2+ supramolecules that are formed from N-H...N hydrogen bonding between zinc-bound and uncoordinated pyrazole rings. The [{Zn(L(tBu))4}(L(tBu))4]2+ moieties are linked into planar 4(4) nets by hydrogen bonding to bridging ClO4- anions. The ClO4- ions are almost perfectly encapsulated in near-spherical cavities of approximate dimensions 5.0 x 5.0 x 4.5 A that are formed by two interlocked supramolecular dications. Similarly, [{Zn(L(tBu))4}(L(tBu))2][PF6]2 crystallizes as discrete supramolecules in the crystal with the PF6- anions occupying a shallow bowl-shaped cavity on the surface of the complex that is formed by two zinc-bound and one uncoordinated pyrazole ligands. (1)H NMR and IR studies of [{Zn(L(tBu))4}(L(tBu))4][ClO4]2 in CD2Cl2 imply that the second-sphere L(tBu) ligands dissociate from the [Zn(L(tBu))4]2+ center in this solvent and that free and metal-bound L(tBu) are in rapid chemical exchange.     

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons,olefins, and alcohols,including mechanistic implications

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.     

Enhanced hydrolytic activity of Cu(II) and Zn(II) complexes in highly cross-linked polymers

The chelate ligand tris[(1-vinylimidazol-2-yl)methyl]amine (5) was synthesized in five steps from commercially available starting materials. Upon reaction with ZnCl2 or CuCl2 in the presence of NH4PF6, the complexes [Zn5Cl]PF6 (6) and [Cu5Cl]PF6 (7) were obtained. The structure of both complexes was determined by single-crystal X-ray crystallography. Immobilization of 6 and 7 was achieved by co-polymerization with ethylene glycol dimethacrylate. The supported complexes P6-Zn and P7-Cu were found to be efficient catalysts for the hydrolysis of bis(p-nitrophenyl)phosphate (BNPP) at 50 degrees C. At pH 9.5, the heterogeneous catalyst P7-Cu was 56 times more active than the homogeneous catalyst 7. Partitioning effects, which increase the local concentration of BNPP in the polymer, are shown to contribute to the enhanced activity of the immobilized catalyst.