The Influence of Defects on Mo‐Doped TiO2 by First‐Principles Studies

TiO₂ doped with transition metals shows improved photocatalytic efficiency. Herein the electronic and optical properties of Mo‐doped TiO₂ with defects are investigated by DFT calculations. For both rutile and anatase phases of TiO₂, the bandgap decreases continuously with increasing Mo doping level. The 4d electrons of Mo introduce localized states into the forbidden band of TiO₂, and this shifts the absorption edge into the visible‐light region and enhances the photocatalytic activity. Since defects are universally distributed in TiO₂ or doped TiO₂, the effect of oxygen deficiency due to oxygen vacancies or interstitial Mo atoms is systemically studied. Oxygen vacancies associated with the Mo dopant atoms or interstitial Mo will reduce the spin polarization and magnetic moment of Mo‐doped TiO₂. Moreover, oxygen deficiency has a negative impact on the improved photocatalytic activity of Mo‐doped TiO₂. The current results indicate that substitutional Mo, interstitial Mo, and oxygen vacancy have different impacts on the electronic/optical properties of TiO₂ and are suited to different applications.     

Direct View of Cr Atoms Doped in Anatase TiO2(001) Thin Film

Imaging the doping elements is critical for understanding the photocatalytic activity of doped TiO₂ thin film. But it is still a challenge to characterize the interactions between the dopants and the TiO₂ lattice at the atomic level. Here, we use high angle annular dark-field/annular bright-field scanning transmission electron microscope (HAADF/ABF-STEM) combined with electron energy loss spectroscopy (EELS) to directly image the individual Cr atoms doped in anatase TiO₂(001) thin film from [100] direction. The Cr dopants, which are clearly imaged through the atomic-resolution EELS mappings while can not be seen by HADDF/ABF-STEM, occupy both the substitutional sites of Ti atoms and the interstitial sites of TiO₂ matrix. Most of them preferentially locate at the substitutional sites of Ti atoms. These results provide the direct evidence for the doping structure of Cr-doped A-TiO₂ thin film at the atomic level and also prove the EELS mapping is an excellent technique for characterizing the doped materials.     

Synthesis and Characterization of Novel N-doped TiO2 Photocatalyst with Visible Light Active

A novel N-doped TiO₂ (N₁-N₂-TiO₂) with substitutional and interstitial N impurities simul-taneously was successfully synthesized.The catalyst was characterized by X-ray diffraction,X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, photoluminescence, and electron paramagnetic resonance. The results demonstrated that the nitrogen was substi-tuted for the lattice oxygen atoms, and was also interstitially doped into the TiO₂ lattice.The photocatalytic tests indicated that the N₁-N₂-TiO₂ showed the highest photocatalytic activities of all the N-doped TiO₂ under visible light, attributing to the synergetic effect of substitutional and interstitial nitrogen of N-doped TiO₂.     

On the Origin of the Visible‐Light Activity of Titanium Dioxide Doped with Carbonate Species

Plane‐wave‐based pseudopotential density functional theory (DFT) calculations are used to elucidate the origin of the high photocatalytic efficiency of carbonate‐doped TiO₂. Two geometrically possible doping positions are considered, including interstitial and substitutional carbon atoms on Ti sites. From the optical absorption properties calculations, we believe that the formation of carbonates after doping with interstitial carbon atoms is crucial, whereas the contribution from the cationic doping on Ti sites is negligible. The carbonate species doped TiO₂ exhibits excellent absorption in the visible‐light region of 400–800 nm, in good agreement with experimental observations. Electronic structure analysis shows that the carbonate species introduce an impurity state from Ti 3d below the conduction band. Excitations from the impurity state to the conduction band may be responsible for the high visible‐light activity of the carbon doped TiO₂ materials.     

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.     

Photocatalytic Degradation of Glyphosate in Water by N‐Doped SnO2/TiO2 Thin‐Film‐Coated Glass Fibers

Photocatalytic degradation of glyphosate contaminated in water was investigated. The N‐doped SnO₂/TiO₂ films were prepared via sol–gel method, and coated on glass fibers by dipping method. The effects of nitrogen doping on coating morphology, physical properties and glyphosate degradation rates were experimentally determined. Main variable was the concentration of nitrogen doping in range 0–40 mol%. Nitrogen doping results in shifting the absorption wavelengths and narrowing the band gap energy those lead to enhancement of photocatalytic performance. The near optimal 20N/SnO₂/TiO₂ composite thin film exhibited about two‐ and four‐folds of glyphosate degradation rates compared to the undoped SnO₂/TiO₂ and TiO₂ films when photocatalytic treatment were performed under UV and solar irradiations, respectively, due to its narrowest band gap energy (optical absorption wavelength shifting to visible light region) and smallest crystallite size influenced by N‐doping.     

Fabrication of Predominantly Mn4+‐Doped TiO2 Nanoparticles under Equilibrium Conditions and Their Application as Visible‐Light Photocatalyts

The chemical state of a transition‐metal dopant in TiO₂ can intrinsically determine the performance of the doped material in applications such as photocatalysis and photovoltaics. In this study, manganese‐doped TiO₂ is fabricated by a near‐equilibrium process, in which the TiO₂ precursor powder precipitates from a hydrothermally obtained transparent mother solution. The doping level and subsequent thermal treatment influence the morphology and crystallization of the TiO₂ samples. FTIR spectroscopy and X‐ray photoelectron spectroscopy analyses indicate that the manganese dopant is substitutionally incorporated by replacing Ti⁴⁺ cations. The absorption band edge can be gradually shifted to 1.8 eV by increasing the nominal manganese content to 10 at %. Manganese atoms doped into the titanium lattice are associated with the dominant 4+ valence oxidation state, which introduces two curved, intermediate bands within the band gap and results in a significant enhancement in photoabsorption and the quantity of photogenerated hydroxyl radicals. Additionally, the high photocatalytic performance of manganese‐doped TiO₂ is also attributed to the low oxygen content, owing to the equilibrium fabrication conditions. This work provides an important strategy to control the chemical and defect states of dopants by using an equilibrium fabrication process.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

Synthesis of Mixed-Phase TiO<Subscript>2</Subscript> Nanopowders Using Atmospheric Pressure Plasma Jet Driven by Dual-Frequency Power Sources

Mixed-phase TiO₂ nanopowders with different ratios of anatase and rutile have been successfully synthesized using atmospheric pressure plasma jet driven by dual-frequency power sources. The crystal structures of the TiO₂ nanopowders were characterized by X-ray diffraction, SAED, HRTEM, and Raman shift spectroscopy. These results indicated that samples possessed anatase and rutile structure, in addition, the crystallinity of the TiO₂ nanopowders increased and the chlorine contamination decreased with discharge RF power increasing. The photocatalytic activity of the TiO₂ nanopowders was evaluated by decomposition methylene blue solution. The TiO₂ nanopowders which were produced at the discharge RF power of 110 W had the highest photocatalytic activity. Optical emission spectroscopy (OES) was used to detect various excited species in the plasma jet. The results indicate that the various RF power significantly changes the intensities of emission lines (Ar, Ar⁺, Ti, Ti⁺, Ti²⁺, Ti³⁺ and O), which results in the TiO₂ nanopowders a mixture of anatase and rutile phases. The nonequilibrium chemical composition could be formed in one step without anneal. It may have potential applications for synthesizing nanosized particles of high crystallinity by reactive nonthermal plasma processing.     

High temperature stability and photocatalytic activity of nanocrystalline anatase powders with Zr and Si co-dopants

TiO₂ nanopowders doped by Si and Zr were prepared by sol–gel method. The effects of Si and Zr doping on the structural, optical, and photo-catalytic properties of titania nanopowders have been studied by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, and UV–Vis absorption spectroscopy. XRD results suggest that adding impurities has a significant effect on anatase phase stability, crystallinity, and particle size of TiO₂. Titania rutile phase formation in ternary system (Ti–Si–Zr) was inhibited by Zr⁴⁺ and Si⁴⁺ co-doped TiO₂ in high temperatures (500–900 °C) and 36 mol% anatase composition is retained even after calcination at 1,000 °C. The photocatalyst activity was evaluated by photocatalytic degradation kinetics of aqueous methylen orange under visible radiation. The results show that the photocatalytic activity of the 20 %Si and 15 %Zr co-doped TiO₂ nanopowders have a larger degradation efficiency than pure TiO₂ under visible light.     

Doped titanium dioxide nanocrystalline powders with high photocatalytic activity

Doped titanium dioxide nanopowders (M:TiO₂; M=Fe, Co, Nb, Sb) with anatase structure were successfully synthesized through an hydrothermal route preceded by a precipitation doping step. Structural and morphological characterizations were performed by powder XRD and TEM. Thermodynamic stability studies allowed to conclude that the anatase structure is highly stable for all doped TiO₂ prepared compounds. The photocatalytic efficiency of the synthesized nanopowders was tested and the results showed an appreciable enhancement in the photoactivity of the Sb:TiO₂ and Nb:TiO₂, whereas no photocatalytic activity was detected for the Fe:TiO₂ and Co:TiO₂ nanopowders. These results were correlated to the doping ions oxidation states, determined by Mössbauer spectroscopy and magnetization data.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Visible‐light‐driven photocatalytic degradation using Mn‐doped SrMoO4 nanoparticles

Mn‐doped SrMoO₄ nanocrystals were synthesized by thermal decomposition of metal–organic salt in an organic solvent with the doping content in the range 0–12 mol%. The structures, morphologies and optical properties were characterized using various techniques. The results suggest that Mo sites in the SrMoO₄ lattice are substituted by the Mn dopant, the adsorption bands are found to be shifted toward the visible light region and the band gap becomes narrower correspondingly. The photocatalytic performance of the as‐synthesized product was determined using the degradation of methylene blue by visible light irradiation. The photocatalytic performance is enhanced with Mn doping, and the optimal degradation rate is 85% in 140 min for 5 mol% Mn doping. The enhanced photocatalytic activity with Mn doping may be ascribed to the energy band adjustment and effective photogenerated electron–hole separation caused by the Mn doping. A possible photocatalytic mechanism is also discussed.     

Synthesis,characterization and photocatalytic properties of tungsten-doped hydrothermal TiO<Subscript>2</Subscript>

Crystalline anatase phase TiO₂ with photocatalytic properties was obtained through a sol–gel low-temperature hydrothermal process. TiO₂ samples doped with tungsten oxide were also obtained by using this synthetic approach. The photocatalytic oxidation of methylene blue in water was monitored to study the influence of the tungsten doping degree on the photocatalytic degradation performance of TiO₂. The degradation rate constant was further increased by adjusting the tungsten doping degree of hydrothermal TiO₂. Also, a much faster photodegradation of methylene blue was achieved using tungsten doped samples baked at 450°C. The results were compared with those obtained with Degussa P25 used as photocatalyst. The structure and optical properties of tungsten-doped TiO₂ were studied by SEM, X-ray diffraction, UV–vis and DRIFT spectroscopy techniques.     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

Synthesis,characterization of B-doped TiO<Subscript>2</Subscript> nanotubes with high photocatalytic activity

B-doped TiO₂ nanotubes (B/TiO₂ NTs) were prepared by the combination of sol–gel process with hydrothermal treatment. The prepared catalysts were characterized by XRD, TEM and XPS. The photocatalytic activity of B/TiO₂ NTs was evaluated through the photodegradation of aqueous methyl orange. The results demonstrated that the 1.5% B/TiO₂ NTs calcined at 300 °C possessed the best photocatalytic activity. Compared with pure TiO₂ nanotubes, the doping with B significantly enhanced the photocatalytic efficiency.     

Zr离子掺杂TiO2可见光催化剂光催化活性的研究

本文采用溶胶-凝胶法制备了Zr离子掺杂TiO₂光催化剂。光催化降解对氯苯酚实验表明,Zr离子掺杂浓度为10%时活性最高,其紫外光、可见光催化活性分别是纯TiO₂的1.5倍和4倍。利用XRD、Raman、XPS、UV-Vis DRS、PL等技术对样品进行了表征,结果表明：Zr离子以取代式掺杂方式进入TiO₂晶格,在TiO₂导带下方形成掺杂能级,增强了可见光响应,促进了光生载流子的分离,此外Zr离子掺杂在催化剂表面引入大量表面缺陷,增加了表面羟基物种,从而使得Zr离子掺杂TiO₂光催化剂的紫外、可见光催化活性显著提高。     

Quantitative XAFS/EELS analyses of nitrogen species in titanium oxide photocatalysts

With a view to rational designing of a highly functional visible-light TiO₂ photocatalyst, nitrogen atoms were doped into TiO₂ samples by an ion implantation technique which enables to control the depth and concentration of dopants. Although the absorbance in the visible-light region of the sample increased by the nitrogen doping, photocatalytic activity of the sample was not directly connected with the photo-absorbance. The N K-edge X-ray absorption near edge structure (XANES) spectrum of the photocatalytic active sample (A-cat) showed a characteristic double peak at 398 and 401 eV, and the XANES spectrum of the inactive sample (I-cat) a distinct single peak around 401 eV. These features of the XANES spectra were well reproduced by theoretical simulations based on the model where an O atom in TiO₂ was replaced by N ((N)s) for A-cat, and that of quasi NO₂ molecule ((NO₂)s) for I-cat. Therefore, we have concluded that the nitrogen atom occupying the oxygen site of TiO₂ is photocatalytic active species effective for visible light photocatalysis. In addition, the quantitative XANES/ELNES analysis has revealed that the photo-absorbance ratio of I-cat to A-cat corresponds well to the ratio of total doped nitrogen concentration rather than photocatalytic active nitrogen ((N)s) concentration. This result indicates that not only (N)s but also (NO₂)s also absorb the visible light. Thus, the absorbance in the visible-light region is not necessarily an indication of the visible-light response of a photocatalyst.     

Preparation of Ce‐doped TiO2 Hollow Fibers and Their Photocatalytic Degradation Properties for Dye Compound

Cerium‐doped titanium dioxide (TiO₂) with a hollow fiber structure was successfully prepared using ammonium ceric nitrate and tetrabutyltitanate as precursors and cotton fiber as the template. The effects of cerium (Ce)‐doping on the crystallite sizes, crystal pattern, and optical property of the prepared catalysts were investigated by means of techniques such as scanning electron microscopy (SEM), X‐ray diffraction (XRD), BET surface area, and UV‐vis diffuse absorption spectroscopy. SEM observation showed that the prepared TiO₂ fibers possessed fibrous shape inherited from the cotton fiber and had a hollow structure. As confirmed by XRD and UV‐vis diffuse absorption spectroscopy examinations, Ce‐doping restrained the growth of grain size and extended the photoabsorption edge of TiO₂ hollow fiber into the visible light region. The present photocatalyst showed higher photocatalytic reactivity in photodegradation of highly concentrated methylene blue (MB) solutions than pure TiO₂ under UV and visible light, and the amount of Ce‐doped significantly affected the catalytic property. In the experiment condition, the photocatalytic activity of 0.5 mol% Ce‐doped TiO₂ fiber was optimal of all the prepared samples. In addition, the possibility of cyclic usage of the photocatalyst was also confirmed. The material was easily removed by centrifugal separation. Therefore, using the template method and by doping with cerium, TiO₂ may hopefully become a low‐energy consuming, high activity and green environmentally friendly catalytic material.     

Synthesis of TiO<Subscript>2</Subscript> using different hydrolysis catalysts and doped with Zn for efficient degradation of aqueous phase pollutants under UV light

In this work, various TiO₂ and TiO₂ doped with 0.1, 1.0, and 5.0 mol% of Zn were prepared by the sol–gel method varying different hydrolysis catalysts (HNO₃, OHAc, H₃PO₄) in order to be used as photocatalysts for environmental applications. The X-ray diffraction results showed that the different TiO₂ samples have presented the anatase as main phase, However, the acid nature has played an important role in the superficial and optical properties. The N-physisortion analysis has revealed that the specific surface area of calcined TiO₂ samples prepared using H₃PO₄, HOAc, and HNO₃ was 245, 100, and 90 m² g⁻¹, respectively, while the spectroscopic UV analysis, the band gap energy has shifted by 3.3–3.0 eV. In order to improve the optical properties of TiO₂, the last preparation was doped with different zinc concentrations. The result showed that, as the Zn concentration increase by 0.1–5.0 mol%, the surface area increased from 90 to 120 m² g⁻¹. Nevertheless, the E _g returned from 3.0 to 3.32. The SEM analyses have not revealed important morphological changes between no doped and doped materials. The catalytic activity of the composite was studied on the photocatalytic degradation of 2,4-Dichlorophenoxyacetic acid (2,4-D) and the activity results showed that small Zn concentrations decrease the t _1/2 in 28 min.