The C2-Symmetry Colorimetric Dye Based on a Thiosemicarbazone Derivative and its Cadmium Complex for Detecting Heavy Metal Cations (Ni2+, Co2+, Cd2+, and Cu2+) Collectively,in DMF

The field of chemosensing has been experiencing an exponential expansion in recent times, due to increased demands for simpler and user-friendly analytical techniques, in order to combat and confront the challenges of industrial pollutions in the twenty-first century. Metal complex-based chemosensors have received little attention while exhibiting excellent sensing properties, comparing to their organic counterparts. Thus, a thiosemicarbazone-based (H) and its cadmium complex (P) were synthesized, characterized and their photophysical and chemosensing properties were investigated in DMF solvent. The addition of molar equivalents of selected cations (of nitrates or chloride salts) to H and P, produced visually detectable colour changes as well as remarkable spectral shifts. Explicitly, the two probes (H and P) were able to collectively discriminate heavy metal cations such as Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni^2+, and Ag⁺, both in DMF, among all other heavy metal cations tested. None of the anions could be detected by H or P, even when the tetrabutylammonium salts (TBAs) were used, the action presumably ascribed to the solvent effect. Thus, H and P can be used to selectively and sensitively detect the presence of heavy metal cations, via naked-eye detectable colour changes in an aqueous soluble solvent such as DMF.

     

Aggregation Behavior of Copolymer Containing Sulfobetaine Structure in Aqueous Solution

Copolymers containing sulfobetaine (P(AM/DMAPS)) were synthesized by aqueous copolymerization of acrylamide with 3-[N-(2-methacroyloylethyl)-N,N- dimethylammonio]-propane sulfonate. Aggregation and disaggregation of P(AM/ DMAPS) copolymer in aqueous solution as a function of copolymer concentration, added salts, and temperature were studied by dynamic laser light scattering. P(AM/DMAPS) copolymers exist as a mixture of individual chains and interchain aggregation in deionized water. At low copolymer concentrations (below 1.0 g L^?1), the intrachain aggregation is dominant. With increasing copolymer concentration, the interchain aggregation is enhanced. The addition of a small amount of salts (C_NaCl < 0.1 mol L^?1; C_MgCl2/CaCl2 < 0.05 mol L^?1) leads to the disaggregation of the intra- and interchain aggregation. Further addition of salts results in the enhancement of interchain aggregation. The influence of various cations (Na⁺, Ca²⁺, Mg²⁺) on the aggregation behavior increases in the order Na⁺ < Ca²⁺ < Mg²⁺. The increase of temperature from 25°C to 60°C facilitates the breakup of intrachain aggregation and the enhancement of interchain aggregation.     

Synthesis,Characterization and Applications of Schiff Base Chemosensor for Determination of Cr(III) Ions

The development of a highly sensitive, selective, and efficient sensor for the determination and detection of Cr(III) ions remains a great challenge. Recently, some fluorescent chemosensors have been developed for the recognition of Cr(III) ions. But, the main drawbacks of the reported fluorescent chemosensors are the lack of selectivity and interference of anions and other trivalent cations. Herein, we designed and synthesized a novel thiazole-based fluorescent and colorimetric Schiff base chemosensor SB2 for the detection of Cr(III) ion by chemodosimetric approach. Using different analytical techniques including UV–vis, ¹³C-NMR, ¹H-NMR, and FT-IR analysis the chemosensor SB2 was structurally characterized. The fully characterized chemosensor SB2 was used for the spectrofluorimetric and colorimetric detection of Cr(III) ions. Interestingly, chemosensor SB2 upon interaction with various metal cations including Ni²⁺, Na⁺, Cd²⁺, Ag⁺, Mn²⁺, K⁺, Zn²⁺, Cu²⁺, Hg²⁺, Co²⁺, Pb²⁺, Mg²⁺, Sn²⁺, Al³⁺ and Cr³⁺ displays highly selective and sensitive fluorescent (turn-on) and colorimetric (yellow to colorless) response toward Cr(III) ions. The fluorescence and UV–vis techniques confirmed the selective hydrolysis of azomethine group (-C?=?N-) of Schiff base chemosensor SB2 by Cr(III) ions. As a result, the fluorescence enhancement was observed that is corresponding to 2-hydroxy-1-nepthaldehyde (fluorophore). The chemosensor SB2 exhibits high interference performance towards Cr(III) ions over other metal cations in a wide pH range. Mover, the quite low detection limit was calculated to be 0.027 µg ml-1 (0.5 µM) (3σ/slop), lower than the maximum tolerable limits of Cr(III ions (10 µM) in drinking water permitted by the United States Environmental Protection Agency (EPA). These results show that chemosensor SB2 has great potential to detect selectively Cr(III) ions in the agricultural, environmental and biological analysis system.

Graphical Abstract

     

Determination of the Association Constants of Macrocyclic Ethers by the Aid of 13C Dipole-dipole Relaxation Time Measurements. I.,: Li+, Mg2+ and Ca2+ complexes of 1,4,7,10-tetraoxacyclododecane

Abstract

The association constants of Li⁺, Ca⁺² and Mg⁺² ions complexing with 1, 4, 7, 10-tetraoxcyclododecane in DHO were determined by the aid of ¹³C dipole-dipole relaxation time measurements. To obtain the K_a, association constant, the T^O ₁ values of the stoichiometric complex solutions and the T₁₀ of the free molecules were applied to the equation derived, 1/K_a· A_o + 2 = 1/P + P, for the 1:1 ratio of the complexing and to the equation 1/2K_a·A_o + 3/2 = P + 1/2P for the 1:2 ratio of the complexing where P, is molar ratio of the crown complexed ions.

Accordingly we found that the binding ability of the macrocyclic ether towards to the cations is in the following order of Li⁺ < Mg⁺² ? Ca⁺² in DHO solutions.     

A 19F NMR Study on the Interaction of the Hexafluoroanions of Group IV Elements with Cations in Solutions

In view of previous studies of tetrafluoroborate solutions¹, it appeared interesting to continue further investigations on the interactions of fluorocomplexes with different cations, in general, and of the MF₆ ^2- fluoro complexes, in particular. In this communication, the high resolution ¹⁹F NMR data are given for the aqueous and water-acetone solutions of silicon, germanium, tin and titanium hexafluorocomplexes, containing paramagnetic (Co²⁺, Ni²⁺, Cu²⁺, Cr³⁺) and diamagnetic (Be²⁺, Mg²⁺, Zn²⁺, NH₄ ⁺) cations.     

Condensation Product of 1-Naphthaldehyde and 3-Aminophenol: Fluorescent “on” Probe for Ce3+and “off” Probe for Dichromate (Cr2O72−)

A new probe (Z)-3-((naphthalen-1-ylmethylene)amino)phenol has been synthesized by condensation reaction between 1-naphthaldehyde and 3-aminophenol for the fluorescent sensing of Ce³⁺ by “on” mode and dichromate (Cr₂O₇^2?) by “off” mode. Metal ions—Ag⁺, Al³⁺, As³⁺, Ba²⁺, Ca²⁺, Cd²⁺, Ce⁴⁺, Co²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe²⁺, Fe³⁺, Hg²⁺, K⁺, La⁺, Li⁺, Mg²⁺, Mn²⁺, Na⁺, Ni²⁺, Pb²⁺, Zn²⁺and anions Br^?, C₂O₄^2?, CH₃COO^?, Cl^?, CO₃^2?, F^?, H₂PO₄^?, HCO₃^?, HF₂^?, HPO₄^2?, I^?, MnO₄^?, NO₃^?, OH^?, S^2?, S₂O₃^2?, SCN^?, SO₄^2? do not interfere. The limit of detection (LOD) for sensing Ce³⁺ and Cr₂O₇^2? ions are 1.286?×?10^–7 M and 6.425?×?10^–6 M, respectively.

     

Repulsion parameters of ions and radicals—Application to perovskite structures

The compressible ion approach to repulsion which has been shown to work well for the alkali halides (J. Phys. Chem. Solids37, 395 (1976) ; Curr. Sci. 46, 359 (1977)) has been extended to other cubic ionic crystals. Repulsion parameters have been refined for a number of ions and radicals viz., Cu⁺, Ag⁺, Tl⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Sm²⁺, Eu²⁺, Yb²⁺, Pb²⁺, H^?, O^2?, S^2?, Se^2?, Te^2?, NH₄⁺, SH^?, SeH^?, BrO₃^?, ClO₃^?, ClO₄^?, CN^?, NH₂^?, NO₃^?, BH₄^?, BF₄^?, SO₄^2?, NH^2?. Using these parameters, calculations have been made on the lattice spacings and compressibilities of a number of perovskite-like crystals of the form A⁺B²⁺C₃^?. The predicted values agree well with experiment. In the case of four crystals viz., LiBaF₃, LiBaH₃, LiEuH₃ and LiSrH₃, there were large discrepancies between the calculated and observed lattice spacings. When these crystals were assumed to be of the inverse perovskite structure, calculations showed good agreement with the experimental data.     

Comparison of the Kinetics of the Exchange Mechanism of the Thallium Ion with 18C6 and with Pentaglyme in Acetonitrile Solutions

Abstract

In acetonitrile solutions, the exchange reaction is bimolecular in the Tl⁺ + 18C6 system, while in the Tl⁺ + pentaglyme system the associative-dissociative and the bimolecular mechanisms coexist at room temperature and the bimolecular exchange reaction dominates at 263° K. For the bimolecular mechanism in the case of Tl⁺ + 18C6 and the associative-dissociative mechanism in the case of Tl⁺ + pentaglyme, the activation energies of the exchange reactions change with temperature. At 298° K, in the Tl⁺ + 18C6 system the activation energy for the bimolecular exchange reaction is ≈ 2 kcal.mol^?1 and exchange rate constant (k₁) is (4.1 ± 0.1) × 10⁷ s^?1mol^?1; in the Tl⁺ + pentaglyme system, the activation energy for the associative-dissociative exchange reaction is ≈ 5 kcal mol^?1 and the decomplexation rate constant (k_?2) is (2.2 ± 0.4) X 10⁵ s^?1. The activation energy for the bimolecular exchange in the Tl⁺ + pentaglyme system was determined to be 3.00 ± 0.05 kcal.mol_?1 and the exchange rate constant (3.0 ± 0.1) X 10⁸ s^?1 mol^?1.     

Cation disorder in NaW2O6+δ·nH2−zO post-ion exchange with K, Rb, Sr, and Cs

The structure of the defect pyrochlore NaW₂O_6+δ·nH_2−zO after ion exchange with K, Rb, Sr or Cs for Na has been investigated using thermal analysis, solid-state nuclear magnetic resonance, laboratory X-ray and neutron diffraction methods. Neutron diffraction studies show that both the A-type cations (Na⁺, K⁺, Rb⁺, and/or Cs⁺) and the water molecules reside within the channels that form in the 111 direction of the W₂O₆ framework and that these strongly interact. The analytical results suggest that the water and A-type cations compete for space in the tunnels within the W₂O₆ pyrochlore framework, with the total number of water molecules and cations being approximately constant in the six samples investigated. The interplay between the cations and water explains the non-linear dependence of the a lattice parameter on the choice of cation. It appears that the ion-exchange capacity of the material will be controlled by the amount of water initially present in the sample.     

Structural and compositional modification of a barium boroaluminosilicate glass surface by thermal poling

In addition to inducing second-order nonlinear properties, significant structural and compositional alteration can be imparted to glass surfaces during the process of thermal poling. In this work, we focus on how thermal poling affects a structurally complex, nominally alkali-free boroaluminosilicate display glass composition. We provide evidence for electrolysis of the glass network, characterized by the migration of both cations (Ba²⁺, Na⁺) and anions (O^?, F^?) towards opposing electrode interfaces. This process results in oxidation of the positively biased electrode and forms a network-former rich, modifier-depleted glass surface layer adjacent to the anodic interface. The modified glass layer thickness is qualitatively correlated to the oxidation resistance of the electrode material, while extrinsic ions such as H⁺/H₃O⁺ at not found in the depletion layer to compensate for the migration of modifier cations out of the region. Rather, FTIR spectroscopy suggests a local restructuring of the B₂O₃–Al₂O₃–SiO₂ network species to accommodate the charge imbalance created by the exodus of network-modifying cations, specifically the conversion of tetrahedral B(4) to trigonal B(3) as Ba or Na ions are removed from B-related sites in the parent network. The resultant poling-induced depletion layer exhibits enhanced hydrolytic resistance under acidic conditions, and the IR spectra are substantially unlike those produced by acid leaching the same glass.     

Stability of aqueous silica nanoparticle dispersions

In this study, we present quantification methods for nanoparticle stability analysis using non-intrusive analytical techniques: attenuated total reflectance, Fourier transform infrared (ATR-FTIR) spectroscopy, ultraviolet–visible (UV–vis) spectrophotometer, zeta potential analyses, and dynamic light scattering (DLS). We use these techniques to study the stability of silica nanoparticle dispersions and the effects of pH, temperature, and electrolytes that would be encountered in oil field brines in a reservoir. Spectral analysis of the Si–O bond at wavenumber of 1110 cm⁻¹ with the ATR-FTIR indicates a structural change on the surface of silica particles as the dispersion pH changes, which agrees with zeta potential measurements. We define a critical salt concentration (CSC) for different salts, NaCl, CaCl₂, BaCl₂, and MgCl₂, above which the silica dispersion becomes unstable. Three distinct stages of aggregation occur in the presence of salt: clear dispersed, turbid, and separated phases. Divalent cations Mg²⁺, Ca²⁺, and Ba²⁺ are more effective in destabilizing silica nanoparticle dispersion than the monovalent cation Na⁺. The CSC for Na⁺ is about 100 times more than for Ca²⁺, Ba²⁺, and Mg²⁺. Among the divalent cations studied, Mg²⁺ is the most effective in destabilizing the silica particles. The CSC is independent of silica concentration, and lowers at high temperature.     

The reactions of Cl+ (3P) and Cl+ (1D) with hydrogen sulphide. A G2 molecular orbital study

G2 ab initio molecular orbital calculations have been performed to study the potential energy surfaces (PESs) associated with the reactions of Cl⁺ in its ³P ground state and in its ¹D first excited state with hydrogen sulphide. [H₂, Cl, S]⁺ singlet and triplet state cations present very different bonding characteristics. The latter are systematically ion-dipole or hydrogen-bonded weakly bound species, while the former are covalent molecular ions. As a consequence, although the Cl⁺(³P) is 34.5 kcal mol^?1 more stable than Cl⁺(¹D), the global minimum of the singlet PES lies 37.3 kcal mol^?1 below the global minimum of the triplet PES. Both singlet and triplet potential energy surfaces show significant differences with respect to those associated with Cl⁺ + H₂O reactions as well as with SH₂ reactions with F⁺. In both cases, the major product should be SH⁺ ₂; SH⁺ and HCl⁺ being the minor products, in agreement with the experimental evidence. The estimated heat of formation for the most stable H₂SCl⁺ singlet state species is 198 ± 1 kcal mol^?1.     

Mixture Design Optimization of an Analytical Procedure for Iron Extraction and Determination From Cassava Leaves by Slurry Sampling Flame Atomic Absorption Spectrometry

ABSTRACT

This paper applies statistical simplex-centroid design to mixture modeling for optimization of the liquid phase composition of cassava slurry leaves in the development of an analytical procedure for iron determination using flame atomic absorption spectrometry (FAAS). This procedure is based on a slurry formation from powdered cassava leaves and a liquid mixture composed of HNO₃, HCl, and H₂O₂ after an ultrasonication process. A quadratic model fitted to the analytical response shows the existence of an experimental region, characterized by low proportions of H₂O₂, for which higher responses are obtained. The proposed procedure allows the determination of iron in the cassava leaves with a detection limit of 1.1 µg g^?1. The precision expressed as relative standard deviation (%RSD, n = 10) was 1.5% for iron concentrations of 25 µg g^?1. The developed procedure was validated by the comparison of results obtained from the application of the digestion procedure and the analysis of certified reference materials: Apple leaves (NIST 1515). Results found were in agreement with the certified values. The proposed method was applied for the determination of iron in four samples of cassava leaves acquired in markets of Feira de Santana City, Brazil. The concentration of iron found in the cassava leaves varied from 250.8 ± 0.7 to 283.4 ± 0.7 µg g^?1.     

Laser Ablation Inductively Coupled Plasma Mass Spectrometry: Principles and Applications

Abstract

The application of laser ablation inductively plasma mass spectrometry (LA‐ICP‐MS) to the determination of major, minor, and trace elements as well as isotope‐ratio measurements offers superior technology for direct solid sampling in analytical chemistry. The advantages of LA‐ICP‐MS include direct analysis of solids; no chemical dissolution is necessary, reduced risk of contamination, analysis of small sample mass, and determination of spatial distributions of elemental compositions. This review aims to summarize recent research to apply LA‐ICP‐MS, primarily in the field of environmental chemistry. Experimental systems, fractionation, calibration procedures, figures of merit, and new applications are discussed. Selected applications highlighting LA‐ICP‐MS are presented.     

Preparation of Sm3+–Eu3+ coactivating red-emitting phosphors and improvement of their luminescent properties by charge compensation

By charge compensating, a series of red-emitting phosphors Ca_0.54Sr_0.16Ca_0.54Sr_0.31Eu_0.08Sm_0.02(MoO₄)_0.6(WO₄)_0.4 were synthesized. Two approaches to charge compensation were used: (a) 2Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+M ⁺, where M⁺ is a monovalent cation like Li⁺, Na⁺ or K⁺; (b) Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+N ^?, where N⁺ is a monovalent anion like F^?, Cl^?, Br^?, or I^?. One red LED was made by combining the phosphor and 390–405 nm emitting LED chip under 20 mA forward-bias current, the color purity, chromaticity coordinates and the luminous intensity of which were 99.5%, x=0.66, y=0.33, 5600 mcd, respectively.     

New books

Under low energy sputtering conditions (e.g. Ar⁺ ions, 300 eV, 10^?8A cm^?2) the Secondary Ion Mass Spectra show almost only those polyatomic ions which correspond to the arrangement of the atoms in the crystal structure. This method for obtaining structural information is demonstrated on a single crystal of cubic ZnS. In the SIMS for this pure ZnS crystal mainly polyatomic ions such as (ZnS)⁺, (ZnS)^?, (ZnSZn)⁺, (SZnS)^?, etc. were observed. Other polyatomic ions such as (Zn₂)⁺ or (S₂^?), which are not originally present in the crystal, are observed only in a very low counting rate ratio. An increase in the energy of the primary ions causes larger clusters of atoms of the crystal to be taken off, as well as polyatomic ions which do not correspond to the original structure. These effects and the influence of the crystallographic orientations are demonstrated on single crystals of CaF₂. Two applications of this method are discussed: the determination of S₂ content in thin films of ZnS and the identification of “FeAl₂O₄” clusters in activated ammonia catalysts (α-Fe+ 3%Al₂O₃).     

Fragmentation Study of Globularin Through Positive and Negative ESI/MS,CID/MS,and Tandem MS/MS

Abstract

The structure of globularin was studied by a mass spectrometric methodology based on the combined use of positive and negative electrospray ionization, collision‐induced dissociation (CID), and tandem mass spectrometry. The mass spectrometry investigation was achieved through in‐source fragmentation of the deprotonated [M?H]^?, protonated [M+H]⁺, lithiated [M+Li]⁺, sodiated [M+Na]⁺, and potassium‐cationized [M+K]⁺ ions. This allowed collision‐induced dissociation spectra of the ionized molecular ions to be obtained to give valuable structural information regarding the nature of both the glycoside and the aglycone moieties and the effect of metal cationization on the CID spectra. Glycosidic fission and ring cleavages of both aglycone and sugar moieties were the major fragmentation pathways observed during collision‐induced dissociation, where the losses of small molecules, the cinnamoyl and the cinnamate parts were also observed. Alkali metal cationization offers additional fragmentation pathways involving cross rings cleavage under CID conditions. Unlike the dissociation of protonated molecular ions, that of metal‐cationized molecules also provides sugar fragments where the C₀ ⁺ fragment corresponding with the glucose ion was obtained as a major daughter peak for all the studied compounds. Even with low abundance, fragment ions coordinated to K⁺ were also observed from [M+K]⁺.     

Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios

Understanding the ion chemistry in flames is crucial for developing ion sensitive technologies for controlling combustion processes. In this work, we measured the spatial distributions of positive ions in atmospheric-pressure burner-stabilized premixed flames of ethylene/oxygen/argon mixtures in a wide range of equivalence ratios ϕ = 0.4÷1.5. A flame sampling molecular beam system coupled with a quadrupole mass spectrometer was used to obtain the spatial distributions of cations in the flames, and a high mass resolution time-of-flight mass spectrometer was utilized for the identification of the cations having similar m/z ratios. The measured profiles of the flame ions were corrected for the contribution of hydrates formed during sampling in the flames slightly upstream the flame reaction zone. We also proposed an updated ion chemistry model and verified it against the experimental profiles of the most abundant cations in the flames. Our model is based on the kinetic mechanism available in the literature extended with the reactions for C₃H₅⁺ cation. Highly accurate W2-F12 quantum chemical calculations were used to obtain a reliable formation enthalpy of C₃H₅⁺. The model was found to reproduce properly the measured relative abundance of the key oxygenated cations (viz., CH₅O⁺, C₂H₃O⁺) in the whole range of equivalence ratios employed, and the C₃H₅⁺ cation abundance in the richest flame with ϕ=1.5, but significantly underpredicts the relative mole fraction of C₃H₃⁺, which becomes a key species under fuel-rich conditions. Apart from this, several aromatic and cyclic C_xH_y cations dominating under fuel-rich conditions were identified. We also considered the most important directions for the further refinement of the mechanism.     

Synthesis and Spectral Study of Several Solid M3[Eu(2,6-Pyridinedicarboxylate)3] Salts (M=Li+, Na+, K+, Rb+, Cs+, NH4 +, and Pyridinium+)

Abstract

Salts of the [Eu(2,6-pyridinedicarboxylate)₃]^3- complex anion and various monovalent inorganic and organic counterions (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺, and pyridinium⁺) have been synthesized and studied by emission spectroscopy. The Eu³⁺ ion emission spectra exhibited by these salts have been observed with high resolution (less than 1.0 cm^?1) and at low temperature (77 K). The emission spectra of these compounds indicate that changing the attached counterion does not affect the site symmetry observed by the europium ion beyond slight distortions indicated by small shifts in the energies of the Eu³⁺ electronic levels.     

Spectroscopic properties, energy transfer and structural analysis of Sr2CeO4:M+ and Sr2CeO4:Eu3+, M+ (M+ = Li+, Na+, K+)

The room-temperature luminescent emission characteristics of Sr₂CeO₄:M⁺ and Sr₂CeO₄:Eu³⁺,M⁺ (M⁺ = Li⁺, Na⁺, K⁺) have been investigated under UV excitation. By introducing appropriate alkali metal cations dopants (Li⁺, Na⁺, K⁺) into the crystalline lattice, not only emission color of the blue-white-emitting Sr₂CeO₄ doped with low Eu³⁺ content can be tuned to green, but also the red emission intensity of Sr₂CeO₄ doped with high Eu³⁺ concentration is strengthened significantly. The relevant mechanisms have been elucidated in detail.