Use of a silver ion selective electrode to assess mechanisms responsible for biological effects of silver nanoparticles

For a detailed analysis of the biological effects of silver nanoparticles, discrimination between effects related to the nano-scale size of the particles and effects of released silver ions is required. Silver ions are either present in the initial particle dispersion or released by the nanoparticles over time. The aim of this study is to monitor the free silver ion activity {Ag⁺} in the presence of silver nanoparticles using a silver ion selective electrode. Therefore, silver in the form of silver nanoparticles, 4.2 ± 1.4 nm and 2–30 nm in size, or silver nitrate was added to cell culture media in the absence or presence of A549 cells as a model for human type II alveolar epithelial cells. The free silver ion activity measured after the addition of silver nanoparticles was determined by the initial ionic silver content. The p {Ag⁺} values indicated that the cell culture media decrease the free silver ion activity due to binding of silver ions by constituents of the media. In the presence of A549 cells, the free silver ion activity was further reduced. The morphology of A549 cells, cultivated in DME medium containing 9.1% (v/v) FBS, was affected by adding AgNO₃ at concentrations of ≥30 μM after 24 h. In comparison, silver nanoparticles up to a concentration of 200 μM Ag did not affect cellular morphology. Our experiments indicate that the effect of silver nanoparticles is mainly mediated by silver ions. An effect of silver on cellular morphology was observed at p {Ag⁺} ≤ 9.2.     

Nonlinear optical properties of nanometer-size silver composite azobenzene containing polydiacetylene film

Diacetylene monomer containing p-nitrophenyl azobenzene moiety (NADA) was synthesized. Silver nanoparticles with different concentrations were adulterated in the above polymerized NADA (PNADA) films and the third-order nonlinear optical properties were investigated in detail. UV–vis spectra and transmission electron microscopy were used to confirm the formation of PNADA/Ag nanocomposite films. The silver nanoparticles (average size of 10 nm) were well dispersed in the polymer films. The value of the nonlinear refractive index n ₂ for PNADA films (8.48×10⁻¹⁵ cm²/W) was much higher than that of pure polydiacetylene films. Further, the introduction of silver nanoparticles into the PNADA polymer films led to the further enhancement of nonlinear optical properties. The maximum value of n ₂ for PNADA/Ag nanocomposite films could be 11.6×10⁻¹⁵ cm²/W. This enhancement should be ascribed to the surface plasmon resonance of silver nanoparticles.     

Ion synthesis of silver nanoparticles in viscous-fluid epoxy resin

A method is described for the ion synthesis of silver nanoparticles in epoxy resin that is in a viscousfluid state (viscosity 30 Pa s) during irradiation. The viscous-fluid or glassy polymer is implanted by 30-keV silver ions at a current density of 4 μA/cm² in the ion beam in the dose range 2.2 × 10¹⁶–7.5 × 10¹⁶ ions/cm². The epoxy layers thus synthesized contain silver nanoparticles, which are studied by transmission electron microscopy and optical absorption spectroscopy. The use of the viscous-fluid state increases the diffusion coefficient of the implanted impurity, which stimulates the nucleation and growth of nanoparticles at low implantation doses and allows a high factor of filling of the polymer with the metal to be achieved.     

Frequency upconversion properties of Ag: TeO<Subscript>2</Subscript>–ZnO nanocomposites codoped with Yb<Superscript>3+</Superscript> and Tm<Superscript>3+</Superscript> ions

Yb³⁺–Tm³⁺ codoped tellurite glasses containing silver nanoparticles (NPs) were synthesized and characterized using transmission electron microscopy and optical techniques. The samples’ composition and the nucleation of NPs were investigated using electron diffraction and energy dispersive spectroscopy. For the optical experiments, the samples were excited using a diode laser operating at 980 nm, in resonance with the Yb³⁺ transition ²F_7/2→²F_5/2. Photoluminescence (PL) bands corresponding to Tm³⁺ transitions were observed at 480, 650, and 800 nm due to the Yb³⁺→ Tm³⁺ energy transfer. PL enhancement was achieved by heat-treatment of the samples at 325°C during different time intervals. The growth of the PL bands correlates with the increase of the silver NPs concentration. The relevant mechanisms contributing for the PL characteristics are discussed.     

UV-protection properties of electrospun polyacrylonitrile nanofibrous mats embedded with MgO and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

This article describes the ultraviolet (UV) protection of MgO and Al₂O₃ nanoparticles embedded electrospun polyacrylonitrile (PAN) nanofibrous mats. UV radiation is a harmful part of sunlight and prolonged exposure to it can cause serious skin damages. In this research, nanofibrous mats consisting of nanofibers with different diameters containing different amounts of MgO, Al₂O₃, MgO Plus, and Al₂O₃ Plus nanoparticles were produced, and their UV-protection was measured. The specific surface area of MgO, MgO Plus, Al₂O₃, and Al₂O₃ Plus nanoparticles was 230, 600, 275, and 550 m²/g, respectively. The mean diameter of electrospun PAN nanofibers embedded with metal oxide nanoparticles was in the range of 665–337 nm. The results showed that the UV-protection (shielding) capability of the mats strongly depends on fiber diameter; in fact a thin mat of nanofibers has a much stronger UV-protection in comparison to a thicker mat composed of regular fibers. UV transmission is reduced as a result of embedding MgO and Al₂O₃ nanoparticles in the electrospun PAN nanofibrous mats. MgO Plus and Al₂O₃ Plus show higher UV-protection than MgO and Al₂O₃.     

Surface-functionalization of spherical silver nanoparticles with macrocyclic polyammonium cations and their potential for sensing phosphates

The synthesis of aqueous dispersion of spherical, underivatized silver nanoparticles (Ag-NPs) stabilized by macrocyclic polyammonium chlorides (MCPAC), [28]ane-(NH₂ ⁺)₆O₂·6Cl⁻ (28-MCPAC) and [32]ane-(NH₂ ⁺)₈·8Cl⁻ (32-MCPAC), which are evidently anion receptors, is reported. As-synthesized Ag-NPs are characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The 28/32-MCPAC-stabilized Ag-NPs show the surface plasmon band around 400 nm. The TEM-images show that the particles are spherical and well-dispersed. By tuning the 28/32-MCPAC:Ag-OAc (silver acetate) ratio, nanoparticles with different core diameters ranging from 13 to 8 nm for 28-MCPAC and from 10 to 6 nm for 32-MCPAC can be obtained. The advantage of using MCPAC as stabilizers is that they make the particles functionalized for sensing anions. Thus, the potential of the as-synthesized Ag-NPs for sensing phosphates: H₂PO₄ ⁻ (monobasic phosphate, MBP), HPO₄ ²⁻ (dibasic phosphate, DBP) and PO₄ ³⁻ (tribasic phosphate, TBP) is investigated spectroscopically. Interaction of phosphate ions with macrocyclic polyammonium cations makes the Ag-NPs bare, leading agglomeration. The phosphate-assisted agglomeration of 32-MCPAC-Ag-NPs follow the order TBP > DBP ≫ MBP. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Arrays of magnetic nanoparticles capped with alkylamines

Magnetic metal and metal oxide nanoparticles capped with alkylamines have been synthesized and characterized by transmission electron microscopy. X-ray diffraction, energy dispersive X-ray analysis and magnetization measurements. Core-shell Pd-Ni particles with composition, Pd₅₆₁Ni₃₀₀₀, (diameter ∼3.3 nm) are superparamagnetic at 5 K and organize themselves into two-dimensional crystalline arrays. Similar arrays are obtained with Pd₅₆₁Ni₃₀₀₀Pd₁₅₀₀ nanoparticles containing an additional Pd shell. Magnetic spinel particles of γ-Fe₂O₃, Fe₃O₄ and CoFe₂O₄ of average diameters in the 4–6 nm range coated with octylamine are all supermagnetic at room temperature and yield close-packed disordered arrays. Relatively regular arrays are formed by dodecylaminecapped Fe₃O₄ nanoparticles (∼8.6 nm diameter) while well-ordered hexagonal arrays were obtained with octylamine-covered Co₃O₄ nanoparticles (∼4.2 nm diameter).     

Multiwalled carbon nanotubes mass-produced by dc arc discharge in He–H2 gas mixture

Uniform cathode deposits (longer than 15 mm), containing multiwalled carbon nanotubes (MWNTs) inside, were produced by dc arc discharge evaporation with a computer-controlled feeder of a pure-carbon electrode without a metal catalyst in a He–H₂ gas mixture. The purification of MWNTs was carried out to remove amorphous carbon and carbon nanoparticles. High-resolution transmission electron microscopy observations and Raman scattering studies show that the MWNTs possess a high crystallinity and a mean outermost diameter of ∼ ∼10 nm. It has been confirmed that the current density in the electron field emission from a purified MWNT mat can reach 77.92 mA/cm², indicating that the purified MWNTs are a promising candidate electron source in a super high-luminance light-source tube or a miniature X-ray source.     

Sticking efficiency of nanoparticles in high-velocity collisions with various target materials

In order to find reliable collector surfaces for the Mesospheric Aerosol – Genesis, Interaction and Composition (MAGIC) sounding rocket experiment, intended to collect atmospheric nanoparticles, the sticking efficiency of nanoparticles was measured on several targets of different materials. The nanoparticles were generated by a molecular beam apparatus in Jena, Germany, by laser ablation (Al₂O₃ particles, diameter 5–50 nm) and by laser pyrolysis (carbon particles, diameter 10–20 nm). In a vacuum environment (>10⁻⁵ mbar) the particles condensed from the gas phase, formed a particle beam, and were accelerated to ∼ ∼1 km/s. The sticking efficiency on the target materials carbon, gold and grease was measured by a microbalance. Results demonstrate moderate to high sticking probabilities. Thus, the capture and retrieval of atmospheric nanoparticles was found to be quantitatively feasible.     

Shape-controlled Synthesis of Gold Nanoparticles from Gold(III)-chelates of β-diketones

Chelating ligands with β-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes out of aqueous HAuCl₄ solutions. Evolution of stable gold nanoparticles happens to be first order with respect to gold particles having rate constants ∼ ∼10⁻² min⁻¹ and subsequent chlorine insertion in the β-diketone skeleton is reported as a general feature. Spherical or triangular or hexagonal particle evolution goes selectively under the influence of different β-diketones in terms of capping and reducing capabilities of the reductants.     

Observation of the Molecular Quenching of μp(2S) Atoms

Kinetic energy distributions of muonic hydrogen atoms μp(1S) have been obtained by means of a time-of-flight technique for hydrogen gas pressures between 4 and 64 hPa. A high energy component of ∼900 eV observed in the data is interpreted as the signature of long-lived μp(2S) atoms, which are quenched in a non-radiative process leading to the observed high energy: the collision of a thermalized μp(2S) atom with a hydrogen molecule H₂ results in the resonant formation of a {[(ppμ)⁺]^*pee}^* molecule. Then the (ppμ)⁺ complex undergoes Coulomb de-excitation and the ∼1.9 keV excitation energy is shared between a μp(1S) atom and one proton. The preliminary analysis of the time spectra gives a long-lived μp(2S) population of ∼1% of all stopped muons, and a quenching rate of ∼4⋅10¹¹ s⁻¹. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preliminary report on the large halo event TADJIKISTAN

Summary A large halo event, TADJIKISTAN, observed recently by the Pamir Collaboration, consists of a halo (diameter ∼2 cm) and of a large number (∼2000) of high-energy showers, distributed over an area ofR∼20 cm. The total observed energy in the halo is estimated to be 4.8·10⁴ TeV. The characteristics of the event are compared with those of ANDROMEDA, another large event observed by the Chacaltaya Collaboration. The observed attenuation mean free path of hadrons, Λ/λ_p = 1.41 _−0.32 ^+0.21 is compatible with that of pions, indicating that the hadrons in the event are not exotic on average. Paper presented at the Special Session on very high-energy cosmic-ray interactions (superfamilies) of the XXIV International Cosmic-Ray Conference, Rome, August 28–September 8, 1995.     

Vortex structure in FeTeSe single crystals

Vortex structure in FeTe_0.66Se_0.44 and FeTe_0.6Se_0.4 single crystals with T _c ∼ 11.7 and 14.5 K, respectively, has been studied using the decoration technique. It has been found that in single crystals with the simplest crystalline structure of 11-family iron-containing superconductors (without interlayers), no regular vortex lattice is observed, similar to the case of the previously studied 122 and 1111 families. Using transmission electron microscopy, the dislocation structure with a density of ∼10⁹ cm⁻² has been observed. The problem of pinning in iron-containing superconductor single crystals is discussed.     

A comparative study of lithium and sodium salts in PAN-based ion conducting polymer electrolytes

The conducting polymer electrolyte films consisting of polyacrylonitrile (PAN) as the host polymer, lithium triflate (LiCF₃SO₃) and sodium triflate (NaCF₃SO₃) as inorganic salts were prepared by the solution-cast technique. The pure PAN film was prepared as a reference. The ionic conductivity for the films is characterized using impedance spectroscopy. The room temperature conductivity for the PAN + 26 wt.% LiCF₃SO₃ film and the PAN + 24 wt.% NaCF₃SO₃ film is 3.04 × 10⁻⁴ S cm⁻¹ and 7.13 × 10⁻⁴ S cm⁻¹, respectively. XRD studies show that the complexation that has occurred in the PAN containing salt films and complexes formed are amorphous. The FTIR spectra results confirmed the complexation has taken place between the salt and the polymer. These results correspond with surface morphology images obtained from SEM analysis. The conductivity–temperature dependence of the highest conducting film from PAN + LiCF₃SO₃ and PAN + NaCF₃SO₃ systems follows Arrhenius equation in the temperature range of 303 to 353 K. The PAN containing 24 wt.% LiCF₃SO₃ film has a higher ionic conductivity and lower activation energy compared to the PAN containing 26 wt.%LiCF₃SO₃ film. These results can be explained based on the Lewis acidity of the alkali ions, i.e., the interaction between Li⁺ ion and the nitrogen atom of PAN is stronger than that of Na⁺ ion.     

Formation of silver nanoparticles during deposition onto viscous-fluid epoxy resin

A new method is proposed for synthesizing metallic nanoparticles in a polymer matrix. These nanoparticles are synthesized during thermal vacuum evaporation of a metal (4.8 × 10⁻⁶ g/cm²) onto the surface of viscousfluid epoxy resin (at a viscosity of 20–120 Pa s) having room temperature, which is well below the glass transition temperature of the polymer. As a result, epoxy resin layers containing silver nanoparticles in their volume form; these nanoparticles are studied by transmission electron microscopy and optical absorption spectroscopy. Various types of disperse structures formed by metallic nanoparticles in the polymer are detected. The morphology of the composite material is found to be controlled by the polymer viscosity and the metal deposition time.     

Highly bacterial resistant silver nanoparticles: synthesis and antibacterial activities

In this article, we describe a simple one-pot rapid synthesis route to produce uniform silver nanoparticles by thermal reduction of AgNO₃ using oleylamine as reducing and capping agent. To enhance the dispersal ability of as-synthesized hydrophobic silver nanoparticles in water, while maintaining their unique properties, a facile phase transfer mechanism has been developed using biocompatible block co-polymer pluronic F-127. Formation of silver nanoparticles is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopy. Hydrodynamic size and its distribution are obtained from dynamic light scattering (DLS). Hydrodynamic size and size distribution of as-synthesized and phase transferred silver nanoparticles are 8.2 ± 1.5 nm (σ = 18.3%) and 31.1 ± 4.5 nm (σ = 14.5%), respectively. Antimicrobial activities of hydrophilic silver nanoparticles is tested against two Gram positive (Bacillus megaterium and Staphylococcus aureus), and three Gram negative (Escherichia coli, Proteus vulgaris and Shigella sonnei) bacteria. Minimum inhibitory concentration (MIC) values obtained in the present study for the tested microorganisms are found much better than those reported for commercially available antibacterial agents.     

Laser ablation of silver and gold in liquid ammonia

Laser ablation of a silver (Ag) and/or gold (Au) target was performed in liquid ammonia (l-NH₃) at 233 K using nanosecond laser pulses of 1064, 532 and 355 nm wavelengths. An “in situ” monitoring of the ablation process by UV/vis/NIR spectroscopy has shown the evolution of the surface plasmon extinction band of silver or gold nanoparticles and thus confirmed their formation. While sols of Au nanoparticles in l-NH₃ are quite stable in air, those of Ag nanoparticles undergo oxidation to Ag(I) complexes with NH₃ ligands. On the other hand, formation of solvated electrons, namely of the (e⁻)NH₃ solvates, has not been unequivocally confirmed under the conditions of our laser ablation/nanoparticle fragmentation experiment, since only very weak vis/NIR spectral features of these solvates were observed with a low reproducibility. Reference experiments have shown that the well-known chemical production of these solvates is hindered by the presence of Ag and Au plates. Ag and Au targets can thus possibly act as electron scavengers in our ablation experiments.     

UV-induced synthesis,characterization and formation mechanism of silver nanoparticles in alkalic carboxymethylated chitosan solution

The silver nanoparticles (AgNPs) were synthesized in an alkalic aqueous solution of silver nitrate (AgNO₃)/carboxymethylated chitosan (CMCTS) with ultraviolet (UV) light irradiation. CMCTS, a water-soluble and biocompatible chitosan derivative, served simultaneously as a reducing agent for silver cation and a stabilizing agent for AgNPs in this method. UV–vis spectra and transmission electron microscopy (TEM) images analyses showed that the pH of AgNO₃/CMCTS aqueous solutions, the concentrations of AgNO₃ and CMCTS can affect on the size, amount of synthesized AgNPs. Further by polarized optical microscopy it was found that the CMCTS with a high molecular weight leads to a branch-like AgNPs/CMCTS composite morphology. The diameter range of the AgNPs was 2–8 nm and they can be dispersed stably in the alkalic CMCTS solution for more than 6 months. XRD pattern indicated that the AgNPs has cubic crystal structure. The spectra of laser photolysis of AgNO₃/CMCTS aqueous solutions identified the early reduction processes of silver cations (Ag⁺) by hydrated electron formed by photoionization of CMCTS. The rate constant of corresponding reduction reaction was 5.0 × 10⁹ M⁻¹ s⁻¹.     

Investigation of scaling laws as applied to the gas discharge in the case of a barrier-discharge-excited Kr/CCl<Subscript>4</Subscript> mixture

The electrical and luminescent characteristics of a barrier-discharge lamp filled with a Kr/CCl₄ (150: 1) mixture are experimentally studied versus the value of pd, which varies in the range (7.6–14) × 10³ Pa cm. When simulating the gas discharge using similarity parameters, the following relationships are fulfilled: for pd = const (p is the pressure, d is the interelectrode distance), the pulse duration and the mean current density are τ _j ∼ 1/p and 〈j〉 ∼ p; the surface charge density on the electrodes, σ ∼ const; the duration of the UV radiation pulse and the efficiency of UV radiation due to a KrCl* (222 nm) exciplex, τ_rad ∼ 1/p and η ∼ p ². The maximal radiation efficiency achieved in the experiments is about 13%. Deviations from the similarity laws for the gas discharge are related to the filamentary form of the observed discharge. Qualitative analysis indicates that similarity laws may be fulfilled for such a form of discharge as well but locally, within a single filament.     

Energy transfer and frequency upconversion in Yb3+–Er3+-doped PbO-GeO2 glass containing silver nanoparticles

We report the infrared-to-visible frequency upconversion in Er³⁺–Yb³⁺-codoped PbO-GeO₂ glass containing silver nanoparticles (NPs). The optical excitation is made with a laser at 980 nm in resonance with the ²F_5/2→²F_7/2 transition of Yb³⁺ ions. Intense emission bands centered at 525, 550, and 662 nm were observed corresponding to Er³⁺ transitions. The simultaneous influence of the Yb³⁺→Er³⁺ energy transfer and the contribution of the intensified local field effect due to the silver NPs give origin to the enhancement of the whole frequency upconversion spectra.