伟大的门捷列夫的预见

今年2月8日是俄罗斯天才的化学家门捷列夫(1834—1907)诞生125周年纪念。特选此译文刊出以为纪念。     

一氧化氮的合成的演示及其方法的讨论

一、反应原理在放电条件下,N2和O2能直接化合生成无色的一氧化氮。放电N2+O2（?）2NO一氧化氮在常温下很容易和O2化合,生成棕色并有刺激性气味的NO2。二、仪器及药品打气球、贮气瓶2个（一个标出刻度）、两口玻璃球（容积140ml）、铁架台、铁丝电。     

氨的制造的教学法

苏联共产党第十九次代表大会的决议指示出化学教师应该提高关于综合技术教育的教学质量,更密切地联系学习与生活,使学生认识重要化学生产的科学原理。氨的制造是属于重要化学生产之列的。研究氨的制造是具有重要的教育教养意义。这课题的材料,可以提供作复习和更深入地去认识以前所熟悉的物质的性质和扩大瞭解关于反应进行的条件,以及在工业上的管理方法.在八年级末学期已经学过硫酸的制造,从而熟悉了一些化学工业制造原理,如阶段的划分和流水作业的装置,扩大反应物质的表面,逆流原理,温度和压力的影响,热的交换等等,在研究氨的制造中巩固了这些原理,并且增加了关于适当的压力和循环作业的利用等概念。     

有机试剂的结构与性质的关系的研究

前言有机试剂是用于化学元素和化合物的测定、分离与浓集、掩蔽的有机化合物。这类化合物数量很多,在分析化学中得到极其广泛的应用。有机试剂结构及其与反应性能之间关系的研究是有机试剂理论研究的基本问题。早在本世纪二十年代Feigl就提出了分析功能团的概念。这个概念广泛地应用于有机试剂的研究中,并不断得到丰富和发展。这一概念的出现,为人们研究有机试剂结构与反应性能的关系奠定了基础。随着现代科学技术的不断发展,X射线衍射、红外光谱、拉曼光谱等现代技术也相继用于有机试剂的研究,使人们对有机试剂的认识进一步加深。此外近代迅速发展起来的络合物结构理论、量子化学方法以及计算技术也被用于有机试剂的研究中,从而使得从理论上     

对公认的Clapeyron方程的推导的不同意见

对公认的Ｃｌａｐｅｙｒｏｎ方程的推导的不同意见郭余年，赵凤云（吉林工学院轻化工程系长春１３００１２）Ｃｌａｐｅｙｒｏｎ方程问世干热力学第二定律成立之前。第二定律建立以后，赋予了它以新的内容，使其成为描述单元系任意温度（压力）、任意两相平衡的普遍公式。...     

基于Matlab的二元共聚合反应的竞聚率的求解

以直线交叉法为依据,根据最小二乘原理,采用Matlab GUI工具设计了一款用于计算二元共聚合反应竞聚率的图形用户程序。与传统的求解竞聚率方法相比,该图形用户程序具有设计原理简单、计算快捷的特点;同时程序提供界面简洁、交互友好的数据输入平台,实用性强。实际应用表明:采用该款图形用户程序所测得的数据与微机动态搜索法、Tidwell-Mortimer法相近,而比采用斜率截距法计算竞聚率的最小差方和更小,并且也避免了采用斜率截距法由于所用方程的非对称性造成的计算结果的不一致性。     

紫精的负离子对耐水的紫精—聚合物膜的光致变色性能的影响

将含不同负离子的苄基紫精分散在混合有ＰＶＰ的ＭＭＡ－ＨＥＭＡ共聚物基质中可制成耐水的光致变色膜。它们的光致变色速度的大小随紫精负离子的不同而有如下序列：Ｖ６（ＰＦ６＾－）〉Ｖ５（ＢＦ４＾－）￣Ｖ４（ＣｌＯ４＾－）〉Ｖ３（ＣＨ３－苯环－ＳＯ３＾－）〉Ｖ２（Ｂｒ＾－）￣Ｖ１（Ｃｌ＾－）。这与这些紫精在ＤＭＦ中的溶解度以及在共聚物基质中的溶解性大小的序列相一致。负离子对这些光致变色膜在空气中的氧化退色速     

具有好的溶解性和高的热稳定性的富勒烯-苝化合物的合成

在氩气保护下,利用N-(正丁基)-N’(4-甲酰基苯氧戊基)-1．6,7,12-四-(4-叔丁基苯氧基)-3,4,9,10-苝酰亚胺和N-甲基甘氨酸产生的亚胺叶立德与富勒烯反应,合成了含富勒烯的苝化合物,用NMR、FT—IR、UV-Vis及TGA等方法对其结构和性能进行了表征和测试。研究结果表明此类化合物具有好的溶解性和高的热稳定性。     

金的快速测定方法的改进

自从本刊1975年第二期“金的快速测定”一文发表以后,读者来信提出了宝贵的意见,认为此法测定金时铊有干扰,且试样分解方法可能使金的结果偏低。过去,我们分析的样品中不含有铊,故对铊的干扰未作考虑。现经试验,在溴氢酸存在下,三价金在低温蒸干时,随时间、温度、溴氢酸用量的不同,均有部份金被还原造成结果偏低。铊的存在对金的测定有干扰。因此对金的快速测定作如下的补充。     

砷的光度分析法的进展

文中着重介绍了近年来砷的光度测定方法的新进展，包括砷斑法、Ag（DDC）光度法、分单质银分散体系光度法、砷钼蓝光度法等。引用文献85篇。     

硫酸溶液中1,1’-硫代羰基二咪唑在碳钢上的吸附及缓蚀影响和碘离子的增强效应

The inhibition effect of 1,1’-thiocarbonyldiimidazole (TCDI) on the corrosion behaviors of mild steel (MS) in 0.5 mol·L -1 H2SO4 solution was studied with the help of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and linear polarization resistance (LPR) techniques. The effect of immersion time on the inhibition effect of TCDI was also investigated over 72 h. For the long-term tests, hydrogen evolution with immersion time (VH2-t) was measured in addition to the three techniques already mentioned. The thermodynamic parameters, such as adsorption equilibrium constant (Kads) and adsorption free energy (⊿Gads) values, were calculated and discussed. To clarify inhibition mechanism, the synergistic effect of iodide ion was also investigated. The potential of zero charge (PZC) of the MS was studied by electrochemical impedance spectroscopy method, and a mechanism of adsorption process was proposed. It was demonstrated that inhibition efficiency increased with the increase in TCDI concentration and synergistically increased in the presence of KI. The inhibition efficiency was discussed in terms of adsorption of inhibitor molecules on the metal surface and protective filmformation.     

Adsorption and Corrosion Inhibition Effect of 1,1′-Thiocarbonyldiimidazole on Mild Steel in H2SO4 Solution and Synergistic Effect of Iodide Ion

The inhibition effect of 1,1′-thiocarbonyldiimidazole (TCDI) on the corrosion behaviors of mild steel (MS) in 0.5 mol·L⁻¹ H₂SO₄ solution was studied with the help of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and linear polarization resistance (LPR) techniques. The effect of immersion time on the inhibition effect of TCDI was also investigated over 72 h. For the long-term tests, hydrogen evolution with immersion time (V_H2-t) was measured in addition to the three techniques already mentioned. The thermodynamic parameters, such as adsorption equilibrium constant (K_ads) and adsorption free energy (ΔG_ads) values, were calculated and discussed. To clarify inhibition mechanism, the synergistic effect of iodide ion was also investigated. The potential of zero charge (PZC) of the MS was studied by electrochemical impedance spectroscopy method, and a mechanism of adsorption process was proposed. It was demonstrated that inhibition efficiency increased with the increase in TCDI concentration and synergistically increased in the presence of KI. The inhibition efficiency was discussed in terms of adsorption of inhibitor molecules on the metal surface and protective film formation.     

Corrosion inhibition of carbon steel immersed in a 1 M HCl solution using benzothiazole derivatives

Corrosion inhibition effect of 2-mercaptobenzothiazole (MBT) and 2-aminobenzothiazole (ABT) compounds on ST-37 carbon steel in 1 M hydrochloric acid solution was investigated by electrochemical impedance spectroscopy (EIS), and it was observed that both of these compounds have corrosion inhibition effect on carbon steel. Evaluation of electrochemical behavior in test solutions showed that by increasing the immersion time from 15 to 300 min, corrosion resistance of samples is increased and at the same immersion time MBT has a better corrosion inhibition in comparison to ABT. AFM technique was performed for MBT and ABT. The results of calculations showed superior inhibition efficiency of MBT in comparison to ABT. This can cause easier protonation and consequently adsorption on the metal surface occurs.     

An investigation of carbon steel corrosion inhibition in hydrochloric acid medium by an environmentally friendly green inhibitor

The inhibition effect of polyphenols extracted from olive mill wastewater (PP) on carbon steel in 1.0 M HCl solution was studied. Inhibition efficiency of PP was carried out by using chemical (weight loss method) and electrochemical techniques [potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)]. The effect of temperature and immersion time on the corrosion behavior of carbon steel in 1.0 M HCl with addition of an extract was also studied. The results show that PP acts as a very good inhibitor, and the inhibition efficiency increases with the concentration of PP and decreases with rising temperature. Polarization curves show that PP behaves as a mixed-type inhibitor in hydrochloric acid. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through an appropriate equivalent circuit model; a constant phase element has been used. EIS shows that charge-transfer resistance increases and the capacitance of double layer decreases with the inhibitor concentration, confirming the adsorption process mechanism. The activation energy as well as other thermodynamic parameters for the inhibition process were calculated. The adsorption of PP obeys the Langmuir adsorption isotherm.     

Corrosion inhibition behavior of cefuzonam at mild steel/HCl acid interface

The adsorption and corrosion inhibition behavior of cefuzonam (CZM) at mild steel surface were studied gravimetrically and electrochemically by using electrochemical impedance spectroscopy and Tafel polarization techniques. The increase in concentration and immersion time showed a positive effect. Inhibitor molecules directly adsorb on the surface on the basis of donor acceptor interactions between the p-electrons of benzene, sulfur and nitrogen atoms and the vacant d-orbital of iron atoms. The adsorption of CZM followed the Langmuir adsorption isotherm. A potentiodynamic polarization study revealed that CZM acted as mixed type of inhibitor. The results obtained from different methods are in good agreement. The adsorption behavior of CZM was experimentally investigated by contact angle measurement on metal surface. The contact angle of metal surface to the acid solution increased with inhibitor concentration, thereby confirming the increased hydrophobic nature of metal surface to the acid solution having the inhibitor.     

Inhibition effect of environmentally benign Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution

The inhibition of the corrosion of mild steel in hydrochloric acid solution by the seed extract of Karanj (Pongamia pinnata) has been studied using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization, and linear polarization techniques. Inhibition was found to increase with increasing concentration of the extract. The effect of temperature, immersion time, and acid concentration on the corrosion behavior of mild steel in 1 M HCl with addition of extract was also studied. The adsorption of the extract on the mild steel surface obeyed the Langmuir adsorption isotherm. Values of inhibition efficiency calculated from weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy are in good agreement. Polarization curves showed that Karanj (P. pinnata) seed extract behaves as a mixed-type inhibitor in hydrochloric acid. The activation energy as well as other thermodynamic parameters for the inhibition process was calculated. The adsorbed film on mild steel surface containing Karanj (P. pinnata) seed extract inhibitor was also measured by Fourier transform infrared spectroscopy. The results obtained showed that the seed extract of Karanj (P. pinnata) could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric acid media.     

Aqueous extract of <Emphasis Type="Italic">Argemone mexicana</Emphasis> roots for effective protection of mild steel in an HCl environment

The inhibition effect of aqueous Argemone mexicana root extract (AMRE) on mild steel corrosion in 1 M HCl has been studied by weight loss, Tafel polarization curves, electrochemical impedance spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy techniques. Results indicate that inhibition ability of AMRE increases with the increasing amount of the extract. A maximum corrosion inhibition of 94 % is acknowledged at the extract concentration of 400 mg L^?1. Polarization curves and impedance spectra reveal that both cathodic and anodic reactions are suppressed due to passive layer formation at the metal–acid interface. It is also confirmed by SEM micrographs and FTIR studies. Furthermore, the effects of acid concentration (1–5 M), immersion time (120 h) and temperature (30–60 °C) on inhibition potential of AMRE have been investigated by the weight loss method and electrochemical techniques. An adsorption mechanism is also proposed on the basis of weight loss results, which shows good agreement with the Langmuir isotherm.     

Synergistic effect of AM-4VP-9 copolymer and iodide ion on corrosion inhibition of mild steel in 1 M H2SO4

The effect of iodide ions on the corrosion inhibition of mild steel in 1 M sulfuric acid in the presence of poly(acrylamide-co-4-vinylpyridine) copolymer abbreviated by (AM-4VP-9) was studied by weight loss measurements and electrochemical techniques (impedance spectroscopy and polarisation curves) at 18 °C. The results obtained showed that the inhibition efficiency increased with increasing copolymer concentration. It was also found that the inhibition efficiency increased with the addition of potassium iodide (KI) to the copolymer. A synergistic effect was observed between the AM-4VP-9 copolymer and KI. On the other hand, it was found that the inhibiting effect of the system (AM-4VP-9 + KI) increased with increasing immersion time. Polarisation curves indicate that (AM-4VP-9) copolymer act as mixed inhibitors. EIS measurements show an increase of the transfer resistance with the inhibitor concentration.     

Ceforanide: a new and efficient corrosion inhibitor for mild steel in HCl solution

The corrosion inhibition properties of ceforanide for mild steel in HCl solution were analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and gravimetric methods. The increase in inhibitor concentration and immersion time showed a positive effect on inhibition efficiency. The experimental data showed a frequency distribution and therefore a modeling element with frequency dispersion behavior and a constant phase element have been used. In aqueous acid solution, mild steel reacts by evolution of hydrogen. Visual observations showed that the hydrogen evolution decreased (i.e., corrosion inhibition effect increased) with increasing concentration of ceforanide. Potentiodynamic polarization study revealed that ceforanide acted as a mixed type of inhibitor. The results obtained from different methods are in good agreement. The adsorption behavior of ceforanide is experimentally investigated by contact angle measurement on metal surface. The contact angle of metal surface to the acid solution increased with inhibitor concentration; thereby confirming the increased hydrophobic nature of metal surface to the acid solution having inhibitors.     

红茶提取液在盐酸中对碳钢的缓蚀作用

采用动电位极化曲线和交流阻抗（EIS）研究了红茶提取液（BLE）在盐酸介质中对碳钢的缓蚀性能和缓蚀机理。 研究结果表明,采用索氏提取法从红茶茶叶中提取的缓蚀剂,对碳钢在1.0 mol/L盐酸溶液中具有良好的缓蚀性能,随着提取物浓度的增加,缓蚀效率增大。 红茶提取液中的有效缓蚀成分为抑制阴阳极反应的混合型缓蚀剂,在碳钢表面的吸附符合Langmuir等温式,属于单分子层吸附。