Controlled loading and release of methylene blue from LbL polyurethane/poly(acrylic acid) film

The layer‐by‐layer (LbL) assembled multilayer films are widely used in the biomedical field for the controlled drug delivery. Here, multilayer films were assembled by LbL technique through alternating deposition of cationic polyurethane (PU) and poly(acrylic acid) (PAA) on glass slides. Methylene blue (MB) was used as a model drug to investigate the loading and release ability of the prepared multilayer film. The results showed that the loading rate and loading amount of MB were greatly influenced by pH value of the dye solution, and the release rate of MB was controlled both by ionic strength and pH value of immersing solution. The result also indicated that the film had a good reversibility of drug loading and release. It suggested that the PU/PAA multilayer film had potential applications in drug delivery and controlled release. Copyright © 2011 John Wiley & Sons, Ltd.     

Polyelectrolyte spin assembly: Influence of ionic strength on the growth of multilayered thin films

Layer-by-layer (LbL) assembly of polymer electrolyte multilayers is now a well-established method for the fabrication of thin films by sequential adsorption of alternating layers of oppositely charged polyelectrolytes. Most commonly, such adsorptions have been from quiescent solutions of varying ionic strength and pH. Here, we report results on an alternative processing route for the achievement of polymeric multilayer assemblies of poly(sodium-4-styrene sulfonate) and poly(allylamine hydrochloride) that utilizes conventional spin coating. We investigated and describe herein the dependence of multilayer film buildup on solution ionic strength for comparison with similar dependence in quiescent adsorption. Using UV-Vis spectroscopy we monitored the growth of the multilayered films, while with Atomic Force Microscopy (AFM) we examined the surface features and measured coating thicknesses at different salt concentrations. AFM and UV-Vis data reveal two regimes of behavior with increasing salt: strong salt-dependence at low salt contents, and weak salt-dependence for high salt contents. To explain this observation, we introduce the relevance of the dimensionless group De = τ, the local Deborah Number, to the problem. As ionic strength increases, τ increases so that spin-assembly flow influences adsorbed conformation, and thus LbL growth rate. Our results indicate the ability to design and control polyelectrolyte multilayered structures prepared via spin assembly by varying solution properties that influence the conformation of deposited polymer chains. Additionally, our studies reveal the need for study of the fundamental mechanisms of polyelectrolyte adsorption within complex flow fields. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3654–3666, 2004     

聚电解质结构及盐浓度对基于DNA和聚阳离子的层层组装型大孔薄膜结构的影响

选择2种不同类型的聚阳离子[强电解质型聚二烯丙基二甲基氯化铵(PDDA)和弱电解质型聚盐酸丙烯胺(PAH)], 分别和脱氧核糖核酸(DNA)分子通过静电吸附作用制备层层组装膜. 利用原子力显微镜和紫外-可见分光光度计研究了聚阳离子结构和组装分子溶液中盐(NaCl)浓度对大孔结构及薄膜生长规律的影响. 结果表明, 在DNA/PDDA体系中, 盐浓度对于大孔结构的形成起到关键性作用. 而对于DNA/PAH薄膜体系, 即使增加DNA或PAH溶液中盐的浓度, 也不会有大孔结构出现, 这主要是由PAH分子的弱电解质特性决定的.     

Amperometric uric acid sensors based on polyelectrolyte multilayer films

Uricase (UOx) and polyelectrolyte were used for preparation of a permselective multilayer film and enzyme multilayer films on a platinum (Pt) electrode, allowing the detection of uric acid amperometrically. The polyelectrolyte multilayer (PEM) film composed of poly(allylamine) (PAA) and poly(vinyl sulfate) (PVS) were prepared via layer-by-layer assembly on the electrode, functioning as H₂O₂-selective film. After deposition of the permselective film (PAA/PVS)₂PAA, UOx and PAA were deposited via layer-by-layer sequential deposition up to 10 UOx layers to prepare amperometric sensors for uric acid. Current response to uric acid was recorded at +0.6 V vs. Ag/AgCl to detect H₂O₂ produced from the enzyme reaction. The response current increased with increasing the number of UOx layers. Even in the presence of ascorbic acid, uric acid can be detected over the concentration range 10⁻⁶-10⁻³ M. The response current and deposited amount of UOx were affected by deposition bath pH and the addition of salt. The deposition of PAA/UOx film prepared in 2 mg ml⁻¹ solution (pH 11) of PAA with NaCl (8 mg ml⁻¹) and 0.1 mg ml⁻¹ solution (pH 8.5) of UOx with borate (100 mM) resulted in an electrode which shows the largest response to uric acid. The response of the sensor to uric acid was decreased by 40% from the original activity after 30 days.     

Influence of solvent quality on the growth of polyelectrolyte multilayers

The effect of solvent conditions on the growth of polyelectrolyte (PE) multilayer films comprising poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) on planar substrates was investigated by means of surface plasmon resonance spectroscopy (SPRS), quartz crystal microbalance (QCM), and atomic force microscopy techniques. The solvent quality was varied by the addition of ethanol to the PE solutions used for deposition of the layers, thus tuning the relative strength of electrostatic and secondary intermolecular and intramolecular interactions. Experiments were performed with PE solutions both without added electrolyte and containing 0.5 M NaCl. Decreasing the solvent quality (i.e., increasing the amount of ethanol in the adsorption solution) resulted in a marked increase of both the multilayer film thickness and mass loading, as determined from the SPRS spectra and QCM frequency shifts, respectively. With the solution composition approaching the precipitation point, thick PAH/PSS films were formed due to the screening of the electrostatic intra- and interchain repulsions and enhanced hydrophobic interactions between the polyelectrolyte chains. However, the films formed from water/ethanol mixtures remained stable upon subsequent exposure to water or salt-containing solutions: no significant film desorption occurred after up to 24 h of exposure to water or 0.5 M NaCl solutions. In addition, the effect of postdeposition exposure to water/ethanol mixtures was investigated for PE multilayers assembled from aqueous solutions. In this case, the optical thickness of the films was determined during exposure to water/ethanol mixtures, and instead of swelling, the polyelectrolyte films collapse to the surface as a result of the unfavorable segment-solvent interactions.     

Polyelectrolyte microcapsules templated on poly(styrene sulfonate)-doped CaCO3 particles for loading and sustained release of daunorubicin and doxorubicin

A strategy to incorporate and release anti-cancer drugs of daunorubicin (DNR) and doxorubicin (DOX) in preformed microcapsules is introduced, which is based on charge interaction mechanism. Oppositely charged poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were assembled onto PSS doped-CaCO₃ colloidal particles in a layer-by-layer manner to yield core-shell particles. After removal of the carbonate cores, hollow microcapsules with entrapped PSS were fabricated, which showed spontaneous loading ability of positively charged DNR and DOX. The drug loading was confirmed quantitatively by observations under confocal laser scanning microscopy, transmission electron microscopy and scanning force microscopy. Quantification of the drug loading was performed under different conditions, revealing that a larger amount of drugs could be incorporated at higher drug feeding concentrations and higher salt concentrations. However, putting additional polyelectrolyte layers on the microcapsules after core removal resulted in weaker drug loading efficiency. The drug release behaviors from the microcapsules with different layer numbers were studied too, revealing a diffusion controlled release mechanism at the initial stage (4 h).     

Polyelectrolyte blend multilayer films: surface morphology, wettability, and protein adsorption characteristics

We report the influence of polyelectrolyte (PE) multilayer films prepared from poly(styrene sulfonate)-poly(acrylic acid) (PSS-PAA) blends, deposited in alternation with poly(allylamine hydrochloride) (PAH), on film wettability and the adsorption behavior of the protein immunoglobulin G (IgG). Variations in the chemical composition of the PAH/(PSS-PAA) multilayer films, controlled by the PSS/PAA blend ratio in the dipping solutions, were used to systematically control film thickness, surface morphology, surface wettability, and IgG adsorption. Spectroscopic ellipsometry measurements indicate that increasing the PSS content in the blend solutions results in a systematic decrease in film thickness. Increasing the PSS content in the blend solutions also leads to a reduction in film surface roughness (as measured by atomic force microscopy), with a corresponding increase in surface hydrophobicity. Advancing contact angles (theta) range from 7 degrees for PAH/PAA films through to 53 degrees for PAH/PSS films. X-ray photoelectron spectroscopy measurements indicate that the increase in film hydrophobicity is due to an increase in PSS concentration at the film surface. In addition, the influence of added electrolyte in the PE solutions was investigated. Adsorption from PE solutions containing added salt favors PSS adsorption and results in more hydrophobic films. The amount of IgG adsorbed on the multilayer films systematically increased on films assembled from blends with increasing PSS content, suggesting strong interactions between PSS in the multilayer films and IgG. Hence, multilayer films prepared from blended PE solutions can be used to tune film thickness and composition, as well as wetting and protein adsorption characteristics.     

Increased layer interdiffusion in polyelectrolyte films upon annealing in water and aqueous salt solutions

As-deposited films of multilayered polyelectrolytes are considered to be non-equilibrium structures. Due to the strong attraction between oppositely charged polyions, polyelectrolyte interdiffusion is thought to be suppressed during the adsorption process. Equilibration is promoted by a decrease of the electrostatic attraction between polyion pairs. We have used neutral impact collision ion scattering spectroscopy to investigate the influence of polyelectrolyte multilayer annealing in water and aqueous 1 M NaCl solutions at different temperatures (20 and 70 degrees C) on the increase in interpenetration of a single polyelectrolyte layer throughout the whole film. The multilayers were composed of poly(4-vinylpyridinium) and poly(4-styrenesulfonate). Contrast between neighboring layers was established by labelling the layer in question with the heavy atom ruthenium. It is found that both temperature and salt increase layer interpenetration, whereas salt has a stronger influence than temperature. From numerical simulations polyelectrolyte diffusion coefficients were evaluated for the different annealing conditions. The influence of temperature and salt on the equilibration of the film is interpreted in terms of increased screening of polyion charges and binding of small counterions to polyion monomeric units.     

Multivalent ion/polyelectrolyte exchange processes in exponentially growing multilayers

We show, in this paper that multivalent ferrocyanide anions can penetrate into exponentially growing (PGA/PAH)n multilayer films whatever the nature of the last deposited layer. These ions are not able to diffuse out of the film when it is brought in contact with a pure buffer solution. However, the contact of this film with a poly(allylamine) (PAH) or a poly(L-glutamic acid) (PGA) solution leads to the release of ferrocyanide ions from the multilayer. It is shown that the release of ferrocyanide anions, when the film is in contact with a PGA solution, is due to the diffusion of the PGA chains into the film so that an exchange between ferrocyanide ions and PGA chains takes place inside the film. On the other hand, PAH chains do not diffuse into PGA/PAH multilayers. When the film is then brought in contact with a PAH solution, the PAH chains from the solution are expected to strongly interact with the ferrocyanide ions and thus induce a diffusion mechanism of the multivalent anions out of the film, the film/solution interface playing the role of a sink for these ions. This work thus shows that interactions between multivalent ions and exponentially growing films are much more complex than expected at first sight and that polyelectrolyte multilayers must be seen as dynamic entities in which diffusion and exchange processes can take place.     

Assembly of multilayer films from polyelectrolytes containing weak and strong acid moieties

Multilayer films were assembled from a copolymer containing both weakly and strongly charged pendant groups, poly(4-styrenesulfonic acid-co-maleic acid) (PSSMA), deposited in alternation with poly(allylamine hydrochloride) (PAH). The strongly charged groups (styrene sulfonate, SS) are expected to form electrostatic linkages (to enhance film stability), while the weakly charged groups (maleic acid, MA) can alter multilayer film properties because they are responsive to external pH changes. In this study, we varied several assembly conditions such as pH, SS/MA ratio in PSSMA, and the ionic strength of the polyelectrolyte solutions. The multilayer films were also treated by immersion into pH 2 and 11 solutions after assembly. Quartz crystal microgravimetry and UV-visible spectrophotometry showed that the thickness of PSSMA/PAH multilayers decreases with increasing assembly pH regardless of whether salt was present in the polyelectrolyte solutions. When no salt was added, the multilayers are thinner, smoother, and grow less regularly. Atomic force microscopy images indicate that the presence of salt in polyelectrolyte solutions results in rougher surface morphologies, and this effect is especially significant in multilayers assembled at pH 2 and pH 11. When both polyelectrolytes are adsorbed at conditions where they are highly charged, salt was necessary to promote regular multilayer growth. Fourier transform infrared spectroscopy studies show that the carboxylic acids in the multilayers are essentially ionized when assembled from different pHs in 0.5 M sodium chloride solutions, whereas some carboxylic acids remain protonated in the multilayers assembled from solutions with no added salt. This resulted in different pH stability regimes when the multilayers were exposed to different pH solutions, post assembly.     

Surface interactions during polyelectrolyte multilayer build-up. 2. The effect of ionic strength on the structure of preformed multilayers

Interactions between surfaces bearing multilayer films of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) were investigated across a range of aqueous KBr solutions. Three layer films (PAH/PSS/PAH) were preassembled on mica surfaces, and the resulting interactions were measured with the interferometric surface force apparatus (SFA). Increasing the ionic strength of the medium resulted in a progressive swelling of the multilayer films. Interactions in solutions containing more than 10(-3) M KBr were dominated by a long-ranged steric repulsion originating from compression of polyelectrolyte segments extending into solution. In 10(-1) M KBr, repeated measurements at the same contact position showed a considerable reduction of the range and the strength of the steric force, indicating a flattening of the film during initial approach. Furthermore, this flattening was irreversible on the time scale of the experiments, and measurements performed up to 72 h after the initial compression showed no signs of relaxation. These studies aid in understanding the dominant interactions between polyelectrolyte multilayers, including polyelectrolyte films deposited on colloidal particles, which is important for the preparation of colloidally stable nanoengineered particles.     

A SIMPLE METHOD FOR THE INCORPORATION OF LOW MOLECULAR WEIGHT DYES IN ULTRATHIN FILMS

A simple method for the fabrication of ultrathin films containing low molecular weight dye material is introduced(post-adsorption technique). The chromophore used is 4-nitro-4'-decyloxy azobenzene quaternary ammonium salt (azo-10Q).In classical layer-by-layer (LBL) procedures, where the substrate is dipped alternately into the chromophore solution and thecomplementary polyelectrolyte, the chromophore tends to desorb from the film during subsequent immersion in thepolyanion solution, and there is little or no indication of multilayer growth. The extent of desorption depends somewhat onthe selection of polyelectrolyte, the ionic strength and the pH of solution. An alternative approach is to first prepareconventional LBL films from a pair of oppositely charged polyelectrolytes, and then to soak this film into the chromophoresolution, where adsorption by penetration into the LBL film may take place. In preliminary results, a linear dependence ofUV absorbance on layer number of LBL film thus prepared was found, demonstrating the apparent effectiveness of the post-adsorption technique for the preparation of azo-10Q-containing ultrathin films.     

Reversible disulfide cross-linking in layer-by-layer films: preassembly enhanced loading and pH/reductant dually controllable release

This paper describes the fabrication of polyelectrolyte multilayer film which combines preassembly of poly(allylamine hydrochloride) (PAH) and 5,10,15,20-tetraphenyl-21H,23H-porphine-p,p',p' ',p' '-tetrasulfonic acid tetrasodium hydrate (TPPS) in aqueous solution with the layer-by-layer (LbL) assembly of the PAH-TPPS complex and cross-linkable polyelectrolyte, PAASH60, which is a poly(acrylic acid) with 60% of its carboxylic acid grafted of thiol groups. During preassembly, TPPS was incorporated into PAH chains. After oxidative cross-linking to form disulfide bonds in between the layers, the multilayer with preassembly of the PAH-TPPS complex allowed for release and loading of TPPS in a reproducible way. The release of TPPS from the loaded film was a pH-controlled process. To compare with the conventional multilayer, the reloading capacity was greatly enhanced, which was related to the charge binding sites that formed by release of TPPS from the multilayer. Moreover, the release of TPPS could also be achieved by breaking off the cross-linking through reduction of disulfide bonds, and the release rates could be controlled by the reductive efficiency of the reductants in the media. In this way, the release of TPPS is pH/reductant dually controllable, thereby facilitating a new route to multistimuli controllable materials.     

Formation and dielectric properties of polyelectrolyte multilayers studied by a silicon-on-insulator based thin film resistor

The formation of polyelectrolyte multilayers (PEMs) is investigated using a silicon-on-insulator based thin film resistor which is sensitive to variations of the surface potential. The buildup of the PEMs at the silicon oxide surface of the device can be observed in real time as defined potential shifts. The influence of polymer charge density is studied using the strong polyanion poly(styrene sulfonate), PSS, combined with the statistical copolymer poly(diallyl-dimethyl-ammoniumchloride-stat-N-methyl-N-vinylacetamide), P(DADMAC-stat-NMVA), at various degrees of charge (DC). The multilayer formation stops after a few deposition steps for a DC below 75%. We show that the threshold of surface charge compensation corresponds to the threshold of multilayer formation. However, no reversion of the preceding surface charge was observed. Screening of polyelectrolyte charges by mobile ions within the polymer film leads to a decrease of the potential shifts with the number of layers deposited. This decrease is much slower for PEMs consisting of P(DADMAC-stat-NMVA) and PSS as compared to PEMs consisting of poly(allylamine-hydrochloride), PAH, and PSS. From this, significant differences in the dielectric constants of the polyelectrolyte films and in the concentration of mobile ions within the films can be derived.     

Pulsatile Release of Insulin from Layer-by-Layer Assembled Microgel Thin Films

We describe studies concerning the construction and characterization of insulin-impregnated poly(N-isopropylacrylamide-co-acrylic acid) microgel thin films prepared by Layer-by-Layer (LbL) polyelectrolyte assembly. These films can be built up in a highly uniform fashion and display linear buildup dependence even up to 30 layers. Thermoresponsivity of these drug loaded films can be utilized to obtain extended pulsatile release of insulin over many cycles. Continuous thermal pulsing allows solubilization of the embedded peptide and subsequent diffusion through the film layers. The magnitude of release can be tuned based on film thickness. This type of microgel thin film construct proves to be extremely robust and can potentially pulse out constant bursts of peptide for more than one month at a time.     

Exponentially growing layer-by-layer assembly to fabricate pH-responsive hierarchical nanoporous polymeric film and its superior controlled release performance

A hierarchical nanoporous polymer film was fabricated through exponentially growing layer-by-layer assembly of weak polyelectrolytes without any template and post-treatment to greatly enhance loading capacity, release time and linear release range with pH-dependence for small molecules over the reported weak polyelectrolyte films, providing great potentials in controlled drug release applications.     

Combining hydrogen-bonding complexation in solution and hydrogen-bonding-directed layer-by-layer assembly for the controlled loading of a small organic molecule into multilayer films

We have combined hydrogen-bonding complexation in solution and layer-by-layer assembly for the controlled loading of a water-insoluble small organic molecule, bis-triazine (DTA), an azobenzene derivative containing multiple hydrogen bond donors and acceptors, into layer-by-layer multilayer films of poly(acrylic acid) and diazo-resin. UV-visible spectroscopy indicates that DTA has been loaded into multilayer films, with the loading amount increasing linearly with the number of layers. The loading amount can be well tuned either by changing the concentration of DTA or the solvent composition at the complexation step. Fourier transform infrared spectroscopy has revealed that both the complexation and layer-by-layer assembly are driven by hydrogen bonding. After photo-cross-linking and immersion in dimethyl sulfoxide to release DTA, the film can serve as an absorbent for DTA. This study provides a new unconventional layer-by-layer assembly that combines hydrogen-bonding complexation in solution and hydrogen-bond-driven layer-by-layer assembly at the interface. This method provides a new route to load a variety of water-insoluble functional organic molecules into layer-by-layer films.     

Motion‐Based,High‐Yielding,and Fast Separation of Different Charged Organics in Water

We report a self‐propelled Janus silica micromotor as a motion‐based analytical method for achieving fast target separation of polyelectrolyte microcapsules, enriching different charged organics with low molecular weights in water. The self‐propelled Janus silica micromotor catalytically decomposes a hydrogen peroxide fuel and moves along the direction of the catalyst face at a speed of 126.3 μm s^?1. Biotin‐functionalized Janus micromotors can specifically capture and rapidly transport streptavidin‐modified polyelectrolyte multilayer capsules, which could effectively enrich and separate different charged organics in water. The interior of the polyelectrolyte multilayer microcapsules were filled with a strong charged polyelectrolyte, and thus a Donnan equilibrium is favorable between the inner solution within the capsules and the bulk solution to entrap oppositely charged organics in water. The integration of these self‐propelled Janus silica micromotors and polyelectrolyte multilayer capsules into a lab‐on‐chip device that enables the separation and analysis of charged organics could be attractive for a diverse range of applications.     

Layer-by-layer assembled microgel films with high loading capacity: reversible loading and release of dyes and nanoparticles

Multilayer films containing microgels of chemically cross-linked poly(allylamine hydrochloride) (PAH) and dextran (named PAH-D) were fabricated by layer-by-layer deposition of PAH-D and poly(styrene sulfonate) (PSS). The successful fabrication of PAH-D/PSS multilayer films was verified by quartz crystal microbalance measurements and cross-sectional scanning electron microscopy. The as-prepared PAH-D/PSS multilayer films can reversibly load and release negatively charged dyes such as methyl orange (MO) and fluorescein sodium and mercaptoacetic acid-stabilized CdTe nanoparticles. The loading capacity of the film for MO can be as large as approximately 3.0 microg/cm2 per bilayer, which corresponds to a MO density of 0.75 g/cm3 in the film. The high loading capacity of the PAH-D/PSS films originates from the cross-linked film structure with sufficient binding groups of protonated amine groups, as well as their high swelling capability by solvent. The loaded material can be released slowly when immersing the films in 0.9% normal saline. Meanwhile, the PAH-D/PSS multilayer films could deposit directly on either hydrophilic or hydrophobic substrates such as quartz, polytetrafluoroethylene, polystyrene, poly(ethylene terephthalate), and polypropylene. The microgel films of PAH-D/PSS are expected to be widely useful as matrixes for loading functional guest materials and even for controlled release.     

Influence of the nature of the polycation on the adsorption kinetics and on exchange processes in polyelectrolyte multilayer films

The deposition of polyelectrolyte multilayer films (PEMs) appears more and more as a versatile tool to functionalize a broad range of materials with coatings having controlled thicknesses and properties. To increase the control over the properties of such coatings, a good knowledge of their deposition mechanism is required. Since Cohen Stuart et al. (Langmuir 18 (2002) 5607-5612) showed that the adsorption of one polyelectrolyte could induce desorption of polyelectrolyte complexes instead of regular deposition, more and more findings highlight peculiarities in the deposition of such films. Herein we demonstrate that the association of sodium polyphosphate (PSP) as the polyanion and either poly(-L-lysine hydrobromide) (PLL) or poly(allylamine chloride) (PAH) as the polycations may lead to non-monotonous film deposition as a function of time. Complementary, films containing PSP and PLL can be obtained from a (PLL-HA)(n) template films after the exchange of HA (hyaluronic acid) from the sacrificial template by PSP from the solution. This exchange is accompanied by pronounced film erosion. However, when starting from a (PAH-HA)(n) template, the film erosion and exchange due to the contact with PSP is by far less pronounced, nevertheless the film morphology changes. These findings show that the nature of the polycation used to deposit the PEM film may have a profound influence of the film's response to a competing polyanion.