Nitrogen‐Doped Carbon Nanosheets with Size‐Defined Mesopores as Highly Efficient Metal‐Free Catalyst for the Oxygen Reduction Reaction

Nitrogen‐doped carbon nanosheets (NDCN) with size‐defined mesopores are reported as highly efficient metal‐free catalyst for the oxygen reduction reaction (ORR). A uniform and tunable mesoporous structure of NDCN is prepared using a templating approach. Such controlled mesoporous structure in the NDCN exerts an essential influence on the electrocatalytic performance in both alkaline and acidic media for the ORR. The NDCN catalyst with a pore diameter of 22 nm exhibits a more positive ORR onset potential than that of Pt/C (?0.01 V vs. ?0.02 V) and a high diffusion‐limited current approaching that of Pt/C (5.45 vs. 5.78 mA cm^?2) in alkaline medium. Moreover, the catalyst shows pronounced electrocatalytic activity and long‐term stability towards the ORR under acidic conditions. The unique planar mesoporous shells of the NDCN provide exposed highly electroactive and stable catalytic sites, which boost the electrocatalytic activity of metal‐free NDCN catalyst.     

B,N Co-Doped Three-Dimensional Carbon Aerogels with Excellent Electrochemical Performance for the Oxygen Reduction Reaction

Herein, an ordinary and mass-production approach is reported to synthesize boron (B) and nitrogen (N) co-doped three-dimensional (3D) carbon aerogels (CA) by using glucose and borax as the raw materials by a simple hydrothermal method and then carbonization in NH₃ atmosphere. The porous material (BN-CA-900) possesses a large specific surface area (1032 m² g⁻¹) and high contents of doped pyridinic N and graphitic N. The onset potential (0.91 V vs. reversible hydrogen electrode, RHE), half-wave potential (0.77 V vs. RHE), and current density (5.70 mA cm⁻² at 0.2 V vs. RHE) of BN-CA-900 for ORR are similar to those of commercial Pt/C, indicating that BN-CA-900 has a comparable catalytic activity with Pt/C in alkaline media. The number of electron transfer is 3.86–3.99 and the yield of hydrogen peroxide is less than 6.8 %. BN-CA-900 also presents decent catalytic performance in acidic medium. Moreover, the stability and methanol tolerance of BN-CA-900 are superior to commercial Pt/C in both alkaline and acidic media. The prepared BN-CA-900 is a promising candidate that may be applied in other areas, such as the adsorption of pollution, porous conductive electrodes, and lithium-ion batteries.     

Synthesis and characterization of a novel binuclear iron phthalocyanine/reduced graphene oxide nanocomposite for non-precious electrocatalyst for oxygen reduction

Binuclear iron phthalocyanine/reduced graphene oxide(bi-Fe Pc/RGO) nanocomposite with good electrocatalytic activity for ORR in alkaline medium was prepared in one step. High angle annular dark field image scanning transmission electron microscopy(HAADF-STEM) and energy dispersive X-ray spectroscopy element mapping results show bi-Fe Pc was uniformly distributed on RGO. An obvious cathodic peak located at about-0.23 V(vs. SCE) in CV and an onset potential of-0.004 V(vs. SCE) in LSV indicate the as-prepared bi-Fe Pc/RGO nanocomposite possesses high activity which is closed to Pt/C for ORR. The ORR on bi-Fe Pc/RGO nanocomposite follows four-electron transfer pathway in alkaline medium. Compared with Pt/C, there is only a slight decrease(about 0.02 V vs. SCE) for bi-Fe Pc/RGO nanocomposite when the methanol exists. The excellent activity and methanol tolerance in alkaline solutions proves that bi-Fe Pc/RGO nanocomposite could be considered as a promising cathode catalyst for alkaline fuel cells.     

Electronic Configuration Regulation by N-Doped MXenes Boosting Electrocatalytic Performance of Cobalt Phthalocyanine

The precise control of electronic configurations of catalytic sites via molecular engineering is significantly desirable for boosting electrocatalytic activity. We reported a new-type composite electrocatalyst with cobalt phthalocyanine supported on N-doped MXene nanosheets (N-MXene/CoPc) through a self-assembly process. Beneficial from the joint action of N sites participation and axial coordination, N-MXene/CoPc exhibits a high ORR activity with positive onset potential (E_onset=0.98 V vs. RHE) and half-wave potential (E_1/2=0.863 V), which is superior over the pristine CoPc (E_1/2=0.72 V) and the composite with undoped MXene as support (MXene/CoPc, E_1/2=0.771 V). Additionally, N-MXene/CoPc exhibits an excellent durability with only 8.5 % attenuation after 25000 s of continuous i-t test, while a more obvious decay 18.6 % for 20 wt.% Pt/C. This work not merely reported a robust ORR catalyst, but more provides a reasonable design strategy for nonnoble-metal catalysts through catalyst-support interactions.     

Platinum nanoparticles supported on nitrobenzene-functionalised graphene nanosheets as electrocatalysts for oxygen reduction reaction in alkaline media

A systematic study on the electrocatalytic properties of Pt nanoparticles supported on nitrobenzene-modified graphene (Pt-NB/G) as catalyst for oxygen reduction reaction (ORR) in alkaline solution was performed. Graphene nanosheets were spontaneously grafted with nitrophenyl groups using 4-nitrobenzenediazonium salt. The electrocatalytic activity towards the ORR and stability of the prepared catalysts in 0.1 M KOH solution have been studied and compared with that of the commercial Pt/C catalyst. The results obtained show that the NB-modified graphene nanosheets can be good Pt catalyst support with high stability and excellent electrocatalytic properties. The specific activity of Pt-NB/G for O₂ reduction was 0.184 mA cm⁻², which is very close to that obtained for commercial 20 wt% Pt/C catalyst (0.214 mA cm⁻²) at 0.9 V vs. RHE. The Pt-NB/G hybrid material promotes a four-electron reduction of oxygen and can be used as a promising cathode catalyst in alkaline fuel cells.     

Facile preparation of nitrogen-doped graphene as a metal-free catalyst for oxygen reduction reaction

Nitrogen-doped graphene (nG) is a promising metal-free catalyst for oxygen reduction reaction (ORR) on the cathode of fuel cells. Here we report a facile preparation of nG via pyrolysis of graphene oxide with melamine. The morphology of the nG is revealed using scanning electron microscopy and transmission electron microscopy while the successful N doping is confirmed by electron energy loss spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The resulting nG shows high electrocatalytic activity toward ORR in an alkaline solution with an onset potential of -0.10 V vs. Ag/AgCl reference electrode. The nG catalyzed oxygen reduction exhibits a favorable formation of water via a four-electron pathway. Good stability and anti-crossover property are also observed, which are advantageous over the Pt/C catalyst. Furthermore, the effect of pyrolysis temperature on the structure and activity of nG is systematically studied to gain some insights into the chemical reactions during pyrolysis.     

Bio‐inspired iron/sulfur/graphene nanocomposite and its use in the catalysis of the oxygen reduction reaction at room temperature in alkaline media on a glassy carbon electrode

This work demonstrates the performance of a bio‐inspired iron/sulfur/graphene nanocomposite as a non‐platinum electrocatalyst for the oxygen reduction reaction (ORR) in an alkaline medium. The catalyst shows the most positive ORR onset potential (1.1 V vs. RHE) according to its unique structure in the alkaline medium (KOH solution, pH = 13) at low temperature (T = 298 K). The catalyst is evaluated by the rotating‐disk electrode (RDE) method under various rotating speeds (0–2,000 rpm) in the potential range ?0.02–1.18 V vs. a rechargeable hydrogen electrode (RHE). The number of transferred electrons, as one of the most important parameters, is almost constant over a wide range of potentials (0.1–0.8 V), which indicates a more efficient four‐electron pathway from O₂ to H₂O on the FePc‐S‐Gr surface. The mean size of catalyst centers are in the nanoscale (<10 nm). The estimated Tafel slope in the appropriate range is about ?110 mV per decade at low current density, and E_1/2 of FePc‐S‐Gr displays a negative shift of only 7.1 mV after 10,000 cycles.     

Carbon-supported Fe/Co-N electrocatalysts synthesized through heat treatment of Fe/Co-doped polypyrrole-polyaniline composites for oxygen reduction reaction

In this paper,we synthesized cathode catalysts(PANI-PPYR,Fe/PANI-PPYR,Co/PANI-PPYR and Fe-Co/PANI-PPYR)with high performance oxygen reduction by using a simple heat treatment process.These catalysts were fabricated by directly calcining the Fe and/or Co doped polyaniline(PANI)-polypyrrole(PPYR)composites.Their electrocatalytic activity for ORR both in acidic and in alkaline media was investigated by voltammetric techniques.Among the prepared catalysts,Co/PANI-PPYR presents the most positive ORR onset potential of 0.62 V(vs.SCE)in 0.5 mol/L H2SO4 solution or?0.09 V(vs.SCE)in 1 mol/L NaOH solution.In addition,the Co/PANI-PPYR catalyst shows the largest limiting-diffusion current density for ORR,which is 4.3 mA/cm2@0.2 V(vs.SCE)in acidic and 2.3 mA/cm2@?0.3 V(vs.SCE)in alkaline media.In acidic media,a four-electron reaction of ORR on the Co/PANI-PPYR and Fe/PANI-PPYR catalysts is more dominant than a two-electron reaction.In alkaline media,however,a four-electron and a two-electron mechanisms are co-present for the ORR on all the prepared catalysts.Co/PANI-PPYR catalyst also presents good electrocatalytic activity stability for ORR both in acidic and in alkaline media.     

Highly efficient iron–nitrogen electrocatalyst derived from covalent organic polymer for oxygen reduction

Developing non-precious metal catalyst with high activity, good stability and low cost for electrocatalytic oxygen reduction reaction(ORR) is critical for the wide application of energy conversion system. Here, we developed a cost–effective synthetic strategy via silica assistance to obtain a novel Fe_3C/Fe–N_x–C(named as COPBP-PB-Fe-900-SiO_2) catalyst with effective active sites of Fe–N_xand Fe_3C from the rational design two-dimensional covalent organic polymer(COPBP-PB). The nitrogen-rich COP effectively promotes the formation of active Fe–N_x sites. Additionally, the silica not only can effectively suppress the formation of large Fe-based particles in the catalysts, but also increases the degree of carbonization of the catalyst.The as-prepared COPBP-PB-Fe-900-SiO_2 catalyst exhibits high electrocatalytic activity for ORR with a halfwave potential of 0.85 V vs. reversible hydrogen electrode(RHE), showing comparable activity as compared with the commercial Pt/C catalysts in alkaline media. Moreover, this catalyst also shows a high stability with a nearly constant onset potential and half-wave potential after 10,000 cycles. The present work is highly meaningful for developing ORR electrocatalysts toward wide applications.     

Sulfur doped reduced graphene oxide as metal-free catalyst for the oxygen reduction reaction in anion and proton exchange fuel cells

Sulfur doped reduced graphene oxide (S-rGO) is investigated for catalytic activity towards the oxygen reduction reaction (ORR) in acidic and alkaline electrolytes. X-ray photoelectron spectroscopy shows that sulfur in S-rGO is predominantly integrated as thiophene motifs within graphene sheets. The overall sulfur content is determined to be approximately 2.2 at.% (elemental analysis). The catalytic activity of S-rGO towards the ORR is investigated by both rotating disc electrode (RDE) and polymer electrolyte fuel cell (PEFC) measurements. RDE measurements reveal onset potentials of 0.3 V and 0.74 V (vs. RHE) in acidic and alkaline electrolyte, respectively. In a solid electrolyte fuel cell with S-rGO as cathode material, this is reflected in an open circuit voltage of 0.37 V and 0.78 V and a maximum power density of 1.19 mW/cm² and 2.38 mW/cm² in acidic and alkaline polymer electrolyte, respectively. This is the first report investigating the catalytic activity of a sulfur doped carbon material in both acidic and alkaline liquid electrolyte, as well as in both proton and anion exchange polymer electrolyte fuel cells.     

CoNi nanoparticles anchored inside carbon nanotube networks by transient heating:Low loading and high activity for oxygen reduction and evolution

Transitional metal alloy and compounds have been developed as the low cost and efficient bifunctional electrocatalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER).However,a high mass loading of these catalysts is commonly needed to achieve acceptable catalytic performance,which could cause such problems as battery weight gain,mass transport blocking,and catalyst loss.We report herein the preparation of fine CoNi nanoparticles(5-6 nm)anchored inside a nitrogendoped defective carbon nanotube network(CoNi@N-DCNT)by a transient Joule heating method.When utilized as an electrocatalyst for oxygen reduction and evolution in alkaline media,the CoNi@N-DCNT film catalyst with a very low mass loading of 0.06 mg cm^-2 showed excellent bifunctional catalytic performance.For ORR,the onset potential(Eonset)and the half-wave potential(E_1/2)were 0.92 V versus reversible hydrogen electrode(vs.RHE)and 0.83 V(vs.RHE),respectively.For OER,the potential at the current density(J)of 10 mA cm^-2(E₁₀)was 1.53 V,resulting in an overpotential of 300 mV much lower than that of the commercial RuO₂ catalyst(320 mV).The potential gap between E_1/2 and E₁₀ was as small as 0.7 V.Considering the low mass loading,the mass activity at E₁₀ reached at 123.2 A g^-1,much larger than that of the RuO₂ catalyst and literature results of transitional metal-based bifunctional catalysts.Moreover,the CoNi@N-DCNT film catalyst showed very good long-term stability during the ORR and OER test.The excellent bifunctional catalytic performance could be attributed to the synergistic effect of the bimetal alloy.     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS_2/RGO)复合材料。水热合成的WS_2/RGO具有薄层的二维结构,且由于石墨烯的存在,WS_2以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS_2在碱性条件下氧还原活性非常低,但是复合RGO形成WS_2/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 m A·cm-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS_2/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS_2/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

氮掺杂石墨烯的制备及氧还原电催化性能

采用两步热解法, 用尿素掺杂氧化石墨烯(GO)得到N掺杂的还原氧化石墨烯(N-RGO), 通过控制反应温度, 制备了具有不同电催化活性的N掺杂的还原氧化石墨烯. 透射电子显微镜(TEM)和扫描电子显微镜(SEM)结果显示, 制得的氮掺杂石墨烯(nG)表面褶皱和重叠增加. X射线光电子能谱(XPS)证明, 氮元素以吡啶N、 吡咯N和石墨化的N 3种形式掺杂在石墨烯中, 最高摩尔分数为6.6%. 通过循环伏安(CV)和旋转圆盘电极(RDE)测试了nG的电化学性能, 结果表明, 在酸性电解质中对氧还原(ORR)有较高的催化活性, 起始电位在0.1 V左右, 电催化还原氧气时主要为四电子反应, 且相对商用的Pt/C催化剂有更好的电化学稳定性, 其中第一步热解温度为200℃制得的nG催化性能最好.     

高分散Fe-N-C氧还原反应电催化剂及其在直接甲醇燃料电池中的应用

氧还原反应(ORR)是燃料电池和金属空气电池等洁净发电装置中阴极的主要反应,该反应动力学过程慢,电化学极化严重. Pt基电催化剂具有较好的ORR活性,然而Pt资源有限、价格昂贵,研制高活性、低成本的代Pt电催化剂意义重大.经过几十年的探索,研究者发现将含有C, N和Fe等元素的前体进行高温热处理得到的Fe-N-C电催化剂对ORR具有良好的活性,然而在高温热解过程中Fe容易发生聚集而形成大块颗粒,导致Fe的利用率不高,影响了电催化剂的ORR活性.
　　本文分别以聚吡咯和乙二胺四乙酸二钠(EDTA-2Na)为C和N的前驱体,利用高温热解形成的富含微孔的碳材料对铁前体的吸附及锚定作用,获得了一种Fe高度分散的Fe-N-C电催化剂.采用物理吸脱附技术、高分辨透射电镜(HRTEM)和扫描电镜对Fe-N-C及其制备过程中相关电催化剂的孔结构及表面形貌进行了表征.结果表明,在第一步热解过程中, EDTA-2Na的Na对碳材料起到了活化作用,形成富含微孔的N掺杂碳材料(N-C-1),其BET比表面积达到1227 m2/g,孔径约1.1 nm.在第二步热解过程中, N-C-1有效地抑制了Fe的聚集,产物Fe-N-C中的Fe元素均匀地分布在碳材料中,其比表面积高达1501 m2/g.
　　电化学测试结果表明,在碱性介质(0.1 mol/L NaOH)中, Fe-N-C电催化剂对ORR具有良好的催化活性, ORR起始电位(Eo)为1.08 V (vs. RHE),半波电位(E1/2)0.88 V,电子转移数n接近4, H2O2产率<3%,与商品20%Pt/C(Johnson Matthey)接近.电化学加速老化测试结果表明, Fe-N-C的E1/2未发生明显变化,而Pt的负移45 mV,表明Fe-N-C具有很好的稳定性;在酸性介质(0.1 mol/L HClO4)中, Fe-N-C的Eo为0.85 V, E1/2为0.75 V,其E1/2比Pt/C负移约0.15 V,表明在酸性介质中Fe-N-C对ORR的催化活性还有待提高.采用TEM、X射线衍射、X射线光电子能谱以及穆斯堡尔谱等方法研究了电催化剂构效关系.结果表明, Fe-N-C较好的ORR活性主要来自于高分散的Fe-N4结构,此外, N(吡啶N和石墨N)掺杂的C也对反应具有一定的催化活性.
　　与Pt/C相比, Fe-N-C电催化剂具有很好的耐甲醇性能.本文对比了Fe-N-C和Pt/C作为阴极催化剂的直接醇类燃料电池(DMFC)性能,采用质子交换膜的DMFC最大功率密度分别为47(Fe-N-C)和79 mW/cm2(Pt/C),而采用碱性电解质膜的则分别为33(Fe-N-C)和8 mW/cm2(Pt/C).结合半电池结果表明, Fe-N-C电催化剂在碱性介质中具有比Pt更为优秀的催化活性和稳定性,有望用作DMFC阴极代Pt催化剂.     

不同结构及氮掺杂NiO/rGO氧还原催化剂的制备与性能研究

本文以还原氧化石墨烯（rGO）为载体制备了片状NiO/rGO和球形NiO/N-rGO结构的氧还原催化剂. 通过X-射线衍射（XRD）、Raman（拉曼）测试、X-射线光电子能谱（XPS）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）等方法表征了两种催化剂的结构和形貌. 采用循环伏安法（CV）、Tafel曲线、线性扫描伏安法（LSV）、旋转圆盘电极（RDE）和旋转环盘电极（RRDE）等技术测试研究了两种催化剂的电化学催化氧还原性能. 研究结果表明,球形NiO/N-rGO催化剂催化氧还原的峰电流密度和起始电位（0.89 V vs. RHE）与商业化的Pt/C（20%）催化剂相近. 旋转圆盘电极（RDE）和旋转环盘电极（RRDE）测试证明,在碱性电解液中NiO/rGO和NiO/N-rGO催化的氧还原反应均主要通过4?鄄电子途径反应途径发生,球形NiO/N-rGO催化剂展现出替代Pt/C基催化剂的潜力.     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料(WN-W/NOMC),作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%(w/w)时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m~2·g~(-1),透射电子显微镜(TEM)测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O_2饱和的0.1 mol·L~(-1 )KOH溶液中测试了材料的氧还原催化性能(ORR),显示其起始电位为0.87 V(vs RHE),极限电流密度为4.49 mA·cm~(-2),氧还原反应的转移电子数为3.4,接近于20%(w/w)商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳(0.99 V,5.1 mA·cm~(-2)),但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料（WN-W/NOMC）,作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%（w/w）时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m²·g^-1,透射电子显微镜（TEM）测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O₂饱和的0.1 mol·L^-1 KOH溶液中测试了材料的氧还原催化性能（ORR）,显示其起始电位为0.87 V（vs RHE）,极限电流密度为4.49 mA·cm^-2,氧还原反应的转移电子数为3.4,接近于20%（w/w）商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳（0.99 V,5.1 mA·cm^-2）,但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

In-Situ Electrodeposition of Rhodium nanoparticles Anchored on Reduced Graphene Oxide nanosheets as an Efficient Oxygen Reduction Electrocatalyst

A simple, versatile, and cost-effective one-pot electrochemical deposition is used to fabricate rhodium (Rh) nanoparticles decorated surface of reduced graphene oxide (rGO) functionalized glassy carbon electrode (GCE) for oxygen reduction reaction (ORR) in alkaline media. The chemical and physical structure of the sample is probed via transmission electron microscopy, rotating disk electrode (RDE), X-ray photoelectron spectroscopy, linear sweep voltammetry, and Raman spectroscopy. The synergistic effects between the unique properties of Rh nanoparticles and rGO creates such innovative hybrid that exhibits a catalytic activity comparable to that of the commercial platinum electrocatalyst (Pt/C). As a result, the as-electrodeposited Rh@rGO hybrid exhibits outstanding ORR activity in alkaline media, as evidenced by a larger diffusion-limited current, greater positive onset potential, much better stability and methanol tolerance than Pt/C under the same conditions.     

Synthesis and characterization of iron‐ and nitrogen‐functionalized graphene catalysts for oxygen reduction reaction

Iron‐ and nitrogen‐functionalized graphene (Fe‐N‐G), as well as iron‐ and nitrogen‐functionalized oxidized graphene (Fe‐N‐Gox) catalysts were synthesized as non‐noble metal electrocatalysts for oxygen reduction reaction (ORR). The physical properties of the resultant catalysts were characterized using nitrogen adsorption measurements, X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy. Subsequently, ORR activities of the catalysts were determined electrochemically using a conventional three‐electrode cell via cyclic voltammetry with a rotating disc electrode, the results of which indicated that the synthesized catalysts had a marked electrocatalytic activity towards ORR in acid media. Among the synthesized catalysts, that functionalized using 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine as nitrogen source had the highest electrocatalytic activity with the highest onset potential (0.98 V/SHE) and limiting current density (5.12 mA cm⁻²). The findings are particularly important to determine a non‐precious metal catalyst for ORR activity in fuel cells.     

Nanosheets with High-Performance Electrochemical Oxygen Reduction Reaction Revived from Green Walnut Peel

The synthesis of metal-free carbon-based electrocatalysts for oxygen reduction reactions (ORR) to replace conventional Pt-based catalysts has become a hot spot in current research. This work proposes an activation-assisted carbonization strategy, to manufacture N-doped ultra-thin carbon nanosheets (GWS180M800) with high catalytic activity, namely, melamine is used as an accelerator/nitrogen source, and walnut green peels biological waste as a carbon source. The melamine acts as a nitrogen donor in the hydrothermal process, effectively enhancing the nitrogen doping rate. The content of pyridine nitrogen groups accounts for up to 48.5% of the total nitrogen content. Electrochemical tests show that the GWS180M800 has excellent ORR electrocatalytic activity and stability, and makes a quasi-four-electron ORR pathway clear in the alkaline electrolyte. The initial potential and half slope potential are as high as 1.01 and 0.82 V vs. RHE, respectively. The GWS180M800 catalyst has a better ability to avoid methanol cross poisoning than Pt/C has. Compared with 20 wt% Pt/C, GWS180M800 has improved methanol tolerance and stability. It is a metal-free biochar ORR catalyst with great development potential and application prospects. This result provides a new space for the preparation of valuable porous nano-carbon materials based on carbonaceous solid waste and provides new ideas for catalyzing a wide range of electrochemical reactions in the future.