Palladium tetrazole–supported complex as an efficient catalyst for the Heck reaction

Abstract  

A tetrazole-supported polymeric ligand has been synthesized. The palladium complex derived from the polymeric material has been evaluated as a catalyst for the Heck reaction of aryl iodides and bromides with styrene to provide the corresponding products in high yields. The reaction proceeded smoothly in the presence of 1 mol% with respect to Pd of catalyst in DMF at 125 or 140 °C within 1–3 h. Recycling studies showed that the catalyst can be readily recovered and reused for several times without significant loss of catalytic activity.     

A highly efficient and recyclable fluorous palladium catalyst for Heck reactions in water

Abstract  

A fluorous nano-palladium catalyst has been synthesized and characterized. The catalyst is highly active for the Heck reaction of aryl halides with substituted styrenes in water under air. The corresponding Heck products were obtained in high yields with good stereoselectivity (E/Z up to 98:2). In addition, the catalyst could be recovered by fluorous liquid–liquid separation and reused four times without significant loss of activity or stereoselectivity.     

Ecofriendly and efficient procedure for hetero-Michael addition reactions with an acidic ionic liquid as catalyst and reaction medium

Abstract  

1-Methylimidazolium trifluoroacetate ([Hmim]TFA) is reported as a cost-effective catalyst for a simple and environmentally benign hetero-Michael reaction. [Hmim]TFA works both as reaction medium and catalyst. The reaction is applicable to various aromatic sulfur and nitrogen nucleophiles. This method has advantages such as high yields, short reaction time, and simple workup. The catalyst could be recycled several times without any loss of activity.     

Synthesis of flavanones, azaflavanones, and thioflavanones catalyzed by PMA-SiO2 as a mild, efficient, and reusable catalyst

Abstract  

Cyclization of a variety of chalcones to flavanones catalyzed by 1 mol% phosphomolybdic acid (PMA) supported on silica as a mild, efficient, and reusable catalyst was carried out in high yields. PMA-SiO₂ is an efficient, inexpensive, and green catalyst which gave high conversion yields and could be recycled up to three times without significant loss in activity.     

Synthesis of arylaminotetrazoles by ZnCl2/AlCl3/silica as an efficient heterogeneous catalyst

Abstract  

Arylaminotetrazoles were efficiently synthesized from secondary arylcyanamides by application of ZnCl₂/AlCl₃/silica as a reusable heterogeneous Lewis acid catalyst. 5-Arylamino-1H-tetrazoles can be obtained from arylcyanamides carrying electron-withdrawing substituents on the aryl ring, while with electron-releasing groups 1-aryl-5-amino-1H-tetrazoles will be produced. The former isomer is also produced within longer reaction times (~20 h) even with electron-releasing groups.     

Zirconium(IV) chloride as versatile catalyst for the expeditious synthesis of quinoxalines and pyrido[2,3-<Emphasis Type="Italic">b</Emphasis>]pyrazines under ambient conditions

Abstract  

Among the various transition metal chlorides, zirconium(IV) chloride was found to be an efficient catalyst for the rapid synthesis of a wide range of 2,3-dialkyl- and 2,3-diaryl-quinoxaline and pyrido[2,3-b]pyrazine derivatives in excellent yields at room temperature. The remarkable features of this catalytic process are the mild reaction conditions, quantitative yields, short reaction times, high conversions, tolerability of various functional groups, clean reaction profiles, and operational simplicity.     

Hydrothermal low-temperature preparation and characterization of ZnO nanoparticles supported on natural zeolite as a highly efficient photocatalyst

Abstract  

Nanoparticles of zinc oxide were supported on natural zeolite using a hydrothermal method. The catalyst was characterized by X-ray diffraction, UV–vis diffuse reflectance spectra, scanning electron microscopy, and energy-dispersive X-ray techniques. The maximum rate constant for photodegradation of methylene blue (MB) was observed at 80 wt.% ZnO. The influence of various parameters such as catalyst composition, initial concentration of MB, calcination temperature, pH, and catalyst weight on the photodegradation reaction was studied. It was found that photodegradation of MB followed pseudo-first-order kinetics. The rate constant of the reaction for 80 wt.% ZnO at optimized conditions was approximately 3.8 times higher than that for bare ZnO. The photocatalyst had good reusability after four runs. The higher activity of the supported catalyst is due to greater adsorption of MB on the catalyst and its capability to delocalize the conduction-band electrons of excited ZnO.     

Sulfamic-acid-catalyzed simple and efficient synthesis of 4-aryl-3-methyl-1-phenyl-1H-benzo[g]pyrazolo[3,4-b]quinoline-5,10-diones under solvent-free conditions

Abstract  

An efficient synthesis of 4-aryl-3-methyl-1-phenyl-1H-benzo[g]pyrazolo[3,4-b]quinoline-5,10-diones from the three-component condensation reaction of 3-methyl-1-phenyl-1H-pyrazol-5-amine, aromatic aldehydes, and 2-hydroxy-1,4-naphthoquinone under solvent-free conditions in good to excellent yields and short reaction times using sulfamic acid as heterogeneous acid catalyst has been investigated.     

A one-pot multicomponent reaction for synthesis of 1-amidoalkyl-2-naphthols catalyzed by PEG-based dicationic acidic ionic liquids under solvent-free conditions

Abstract  

A mild and efficient method was developed for preparation of amidoalkyl naphthols via one-pot three-component condensation of aldehydes with amides and 2-naphthol in the presence of polyethylene glycol (PEG)-based dicationic acidic ionic liquid as a powerful catalyst under solvent-free conditions. Excellent yields, short reaction time, simple work-up, and reusable catalyst are advantages of this procedure.     

Highly efficient, one-pot, solvent-free synthesis of 2,4,6-triarylpyridines using a Br?nsted-acidic ionic liquid as reusable catalyst

Abstract  

A simple, efficient, and green method for synthesis of 2,4,6-triarylpyridines by one-pot three-component reaction of acetophenones, aryl aldehydes, and ammonium acetate using 3-methyl-1-(4-sulfonylbutyl)imidazolium hydrogen sulfate [HO₃S(CH₂)₄MIM][HSO₄], a Br?nsted-acidic ionic liquid, as an effective and reusable catalyst under solvent-free conditions is described. This method has several advantages, for example simple procedure with an easy work-up, shorter reaction times, and high yields.     

Application of chloroaluminate ionic liquid as catalyst and medium for the dealkylation of esters

Abstract  

Dealkylation of esters to carboxylic acids was performed using chloroaluminate ionic liquids (PyHBr/AlCl₃, PyHCl/AlCl₃, Me₃NHCl/AlCl₃, Et₃NHCl/AlCl₃) as catalyst and medium. The catalytic activity of PyHBr/AlCl₃ (X(AlCl₃) = 0.67) proved to be superior to the other three ionic liquids for the dealkylation of methyl benzoate with a conversion of 97% after 3 h at 140 °C. After easy separation from the products the ionic liquid PyHBr/AlCl₃ could be reused six times without loss of its activity.     

Granulated copper oxide nanocatalyst: a mild and efficient reusable catalyst for the one-pot synthesis of 4-amino-5-pyrimidinecarbonitriles under aqueous conditions

Abstract  

An efficient method for the synthesis of 4-amino-5-pyrimidinecarbonitriles by the three-component reaction of malononitrile, aldehydes, and N-unsubstituted amidines under aqueous conditions using CuO microspheres as catalyst is reported. The catalyst exhibited remarkable reusable activity.     

Highly efficient glucosylation of flavonoids

Abstract  

A highly efficient procedure for glucosylation of flavonoids by acetobromoglucose is described. Glucosylation is carried out in a two-phase system CHCl₃/H₂O over 96 h using tetrabutylammonium bromide as phase-transfer catalyst. A purification procedure can be performed without column chromatography, and the yields of the glucosylated flavonoids are mostly quantitative. Acetylated glucosides were deprotected with sodium methanolate to afford the desired glucosides of flavonoids.     

Olefin epoxidation with tert-butyl hydroperoxide catalyzed by functionalized polymer-supported copper(II) Schiff base complex

Abstract  

A new polymer-supported Cu(II) Schiff base complex has been synthesized and characterized by elemental (including metal) analysis, FT-IR spectroscopy, UV–Vis diffuse reflectance spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The catalytic performance of this complex was evaluated in the epoxidation of styrene in acetonitrile/N,N-dimethylformamide (9:1) mixture with 70% tert-butyl hydroperoxide as an oxidizing agent under liquid phase reaction conditions for selective synthesis of styrene oxide. Suitable reaction conditions have been optimized by considering the effects of various reaction parameters such as temperature, reaction time, solvent, oxidant, catalyst amount, and styrene to hydroperoxide molar ratio for the maximum conversion of styrene as well as selectivity of styrene oxide. We have also investigated the epoxidation reaction of various olefins under the optimized reaction conditions. Comparison between catalytic activities of the polymer-supported Cu(II) Schiff base complex and its homogeneous analogue showed that the polymer-supported catalyst was more active. This heterogeneous complex was reused for five times. The selectivity of the heterogeneous catalyst does not change even after five times of reusing.     

An efficient synthesis of β-aminoketone compounds through three-component Mannich reaction catalyzed by calcium chloride

Abstract  

Various β-aminoketones were synthesized in a three-component reaction of ketones, aldehydes, and amines in the presence of calcium chloride as catalyst in ethanol in high yields as compared to other synthetic methods. The advantages of this new method are a short reaction time (2 h), high yields, easy workup, convenience, low cost, and eco-friendly protocol.     

PTSA catalyzed simple and green synthesis of benzothiazole derivatives in water

Abstract  

p-Toluenesulfonic acid (10 mol%) was found to be an effective and efficient catalyst for the synthesis of 2-substituted benzothiazoles from aromatic aldehydes and 2-aminothiophenol in moderate to excellent yields in water. This method provides a simple and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple workup procedure.     

DBU-catalyzed expeditious and facile multicomponent synthesis of N-arylquinolines under microwave irradiation

Abstract  

N-Arylquinoline derivatives are obtained in excellent yields by a rapid, easy, and efficient one-pot multicomponent reaction of aromatic aldehydes, 3-arylamino-5,5-dimethylcyclohex-2-enone, and active methylene compounds utilizing 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a catalyst in ethanol under microwave irradiation.     

A one-pot synthesis of N-alkylthiazoline-2-thiones from CS2, primary amines, and 2-chloro-1,3-dicarbonyl compounds in water

Abstract  

A simple synthesis of N-alkylthiazoline-2-thiones by reaction of primary amines, carbon disulfide, and 2-chloro-1,3-dicarbonyl compounds in water is described. Proceeding without catalyst under one-pot conditions in high yields and with broad scope, this method high synthetic utility.     

Solvent-free, one-pot synthesis of amidoalkyl naphthols by a copper p-toluenesulfonate catalyzed multicomponent reaction

Abstract  

An efficient synthesis of amidoalkyl naphthols using copper p-toluenesulfonate (CPTS) as catalyst for the three-component condensation reaction of 2-naphthol, aldehydes, and amides under thermal, solvent-free conditions is described. This new approach has advantages such as short reaction time, high yield, simple work-up, and reusable catalyst.     

Nanocrystalline magnesium oxide: a novel and efficient catalyst for facile synthesis of 2,4,5-trisubstituted imidazole derivatives

Abstract  

Nanocrystalline magnesium oxide with high specific surface area has been used as a novel and efficient catalyst for an improved and rapid synthesis of biologically active 2,4,5-trisubstituted imidazoles, by three-component, one-pot condensation of 1,2-diketones and aryl aldehydes, in excellent yields under solvent-free and conventional heating conditions. The method has several advantages, for example excellent yields, shorter reaction time, and use of a non-toxic and recyclable catalyst.