三氧化钼溶胶凝胶光致变色的研究

通过金属钼粉与过氧化氢溶液反应制备三氧化钼溶胶和凝胶,在高压汞灯的照射下,溶胶和凝胶由浅黄色变成蓝色。Raman光谱研究表明：通过紫外光照,MoO3凝胶结构进行了重整,呈有序排布。乙醇相的MoO3溶胶在紫外光照或长期自然光照下,均表现出光致变色特性。电子自旋共振(ESR)和X射线电子能谱(XPS)研究表明：空气中的MoO3经光照同时接受质子和电子后,生成了蓝色的钼青铜,其中Mo^6^+被还原成了Mo^5^+离子。     

High-speed chiral separations on a microchip with UV detection

Fast chiral separations of a variety of basic and acidic compounds could be realized on microfluidic quartz chips. A microchip electrophoresis instrument equipped with a linear imaging UV-detector was used. The usually applied but troublesome fluorescence tagging in order to enable fluorescence detection could be omitted. Using sulfated cyclodextrins as chiral selectors baseline separation of 19 compounds could be achieved in less than 1 min with high reproducibility. The relative standard deviation of migration time was below 7%. The fastest separation could be performed in 2.5 s which is to date the fastest separation of enantiomers reported. It was possible to apply microchip electrophoresis (MCE) for the determination of high enantiomeric excess (ee) values, as exemplarily shown for pseudoephedrin where 2% of the minor enantiomer could reliably be determined beside high amount of the other isomer. Successful separation of a mixture of 3 chiral drugs could be performed in a single run in less than 11 s utilizing a separation length of only 12 mm. These results show that MCE has great potential for fast chiral analysis and high-throughput screening.     

Biotemplated Hierarchical Porous Material: The Positively Charged Leaf

Addressing the problem of pathogenic bacteria in human health remains a great challenge. We have prepared MgO, replicated from the leaf template, for efficient bacterial removal. The synthesis method perfectly inherits the advantage of the hierarchical three‐level micro‐meso‐macroporous structure from the leaf template. The final product has the integrated advantages of a positively charged property, hierarchical three‐level micro‐meso‐macroporous microstructure and sterilization property so that it could be named “the positively charged leaf”. The positively charged leaf with the microstructure, which is bestowed by Nature, could be utilized in water purification for dye removal and could be extended to pollutant removal, especially of harmful bacteria. The positively charged leaf, as the leaf shield, could be useful in protecting human health. The concept of this work could be applied to the synthesis of different functional metal oxides with hierarchical porous structures, and the products could be utilized in efficient bacterial removal.     

Microfluidic Apps for off-the-shelf instruments

Within the last decade a huge increase in research activity in microfluidics could be observed. However, despite several commercial success stories, microfluidic chips are still not sold in high numbers in mass markets so far. Here we promote a new concept that could be an alternative approach to commercialization: designing microfluidic chips for existing off-the-shelf instruments. Such "Microfluidic Apps" could significantly lower market entry barriers and provide many advantages: developers of microfluidic chips make use of existing equipment or platforms and do not have to develop instruments from scratch; end-users can profit from microfluidics without the need to invest in new equipment; instrument manufacturers benefit from an expanded customer base due to the new applications that can be implemented in their instruments. Microfluidic Apps could be considered as low-cost disposables which can easily be distributed globally via web-shops. Therefore they could be a door-opener for high-volume mass markets.     

齐聚噻吩衍生物在溶液中的光物理和电化学性质

The photophysical and electrochemical properties of a family of oligothiophene derivatives in solution werestudied.It was found that the cyano and the vinyl group could increase fluorescence yield in solution,while theformyl and carboxyl group could decrease energy gap.With increasing the chain length of thiophene ring,the oxi-dation potential could be decreased.     

Initial evaluation of simple mass transfer models to describe hemicellulose hydrolysis in corn stover

The uncatalyzed hydrolysis and removal of xylan from corn stover is markedly enhanced when operation is changed from batch to continuous flow through conditions, and the increase in hemicellulose removal with flow rate is inconsistent with predictions by widely used first-order kinetic models. Mass transfer or other physical effects could influence the hydrolysis rate, and two models reported in the literature for other applications were adapted to investigate whether incorporation of mass transfer into the kinetics could explain xylan removal in both batch and continuous flow through reactors on a more consistent basis. It was found that a simple leaching model and a pore diffusion/leaching model could describe batch and flow through data with accuracy similar to that of conventional batch models and could provide a more rational explanation for changes in performance with flow rate.     

β-Cyclodextrin polymer based fluorescence enhancement method for sensitive adenosine triphosphate detection

A sensitive and facile method for adenosine triphosphate detection has been developed that based on the prominent fluorescence enhancement capability of β-cyclodextrin polymer to pyrene through host-gest interaction.     

电化学浸渍法制备空间氢镍电池用镍电极的循环寿命研究

以空间储能电源4.5’镍极板为对象,研究了过充电、高倍率及极板孔径对电化学浸渍电极循环寿命的影响.结果表明,5C过充电70%,电极初始容量为2.7 Ah,150次循环后容量逐渐下降,300次循环,放电容量约为1.7 Ah(保持率约63%).5C无过充电,300次循环其容量保持率约100%,1000次循环,容量保持率仍可达76%.无过充电,极板孔径及小电流活化均可改善电极循环性能.     

焦化蜡油催化裂化产物氮分布的研究

催化裂化（FCC）原料正向重质化和多样化发展，如何利用催化裂化装置加工焦化蜡油（CGO）成为各炼油厂扩大FCC原料来源和挖潜增效的重要途径。与直馏蜡油（VGO）相比，CGO突出的特点心0是碱性氮化物的质量分数高。中国由于受加氢装置和氢源的限制，CGO一般不加氢而采用直接掺炼的方法，这样不仅存在CGO催化裂化转化过程中FCC催化剂碱氮中毒严重的问题，而且还存在反应后由于部分含氮化合物会直接或间接进入汽油、柴油馏分中，影响产物安定性等问题。为此，对CGO催化裂化转化过程中氮化物的研究引起了研究者的重视。     

FUNCTIONS OF POLYAMINES IN ROSIN SIZING UNDER NEUTRAL PAPERMAKING CONDITIONS

Functions of the polyamines in neutral rosin sizing were investigated using X-ray photoelectron spectroscopy(XPS) and laser diffraction particle analysis. The polyamine with a higher charge density and a smaller unite size could retainmore rosin and cover larger fiber surfaces. The XPS spectra demonstrated that polyallylamine.(PAAm) and polyvinylamine(PVAm) could react with a rosin size to form a-OC-N-CO-structure, but polydimethylamino ethyl methacrylate(PDMAEMA) could not, The formation of this structure may be a key step for effective sizing.     

Anti-diabetic Effects of Polysaccharides from Ethanol-insoluble Residue of Schisandra chinensis(Turcz.) Baill on Alloxan-induced Diabetic Mice

The ethanol-insoluble residue of Schisandra generated during lignans industrial production is usually treated as solid waste. However, there is active polysaccharide which could be used in it. In this work, the water-soluble polysaccharides from the ethanol-insoluble residue of Schisandra(ESCP) were obtained and their anti-diabetic effect was evaluated. The results indicate that ESCP could significantly reduce the blood glucose level in alloxan-induced diabetic mice. Moreover, the ESCP could significantly improve the lipid metabolism and increase the content of liver glycogen in alloxan-induced diabetic mice. The results indicate that ESCP could be developed into a potential natural hypoglycemic agent.     

Determination of nicotine in tobacco with second-order spectra data of charge-transfer complex in ethanol–water binary solvents processed by parallel factor analysis

A new spectrophotometric method for the determination of nicotine in mixtures without pre-separation has been proposed. Nicotine could react with 2,4-dinitrophenol through a charge-transfer reaction to form a colored complex. The second-order data from the visible absorption spectra of the complex in a series of ethanol–water binary solvents with various water volume fractions could be expressed as the combination of two bilinear data matrices. With the bilinear model, the second-order spectra data of mixtures containing nicotine and other interferents could be analysed by using second-order calibration algorithms, and the determination of nicotine in the mixtures could be achieved. The algorithm used here was parallel factor analysis. The method has been successfully used to determine nicotine in tobacco samples with satisfactory results.     

Novel CuS nanofibers using organogel as a template: controlled by binding sites

A new cholesterol organogelator 1 was synthesized, which was confirmed as an effective gelator for various organic solvents and could self-assemble into network fibers in some organic solvents. Moreover, gelator 1 could act as templates for the synthesis of various CuS nanofibers with different helical pitches. For example, when H(2)S was used as the sulfur source, straight and bending helical CuS nanofibers with a pitch of 100-200 nm could be fabricated in butyl acetate and benzene-butanol gel systems, respectively, while bending CuS nanofibers with a similar helical pitch (ca. 50 nm) could be obtained when thioacetamide was used as the sulfur source in both gel systems. It was first found that the morphologies of inorganic nanofibers could be controlled by the binding sites between the inorganic precursor and the organogel.     

纤维素溶剂研究进展

概述了纤维素溶剂的重要研究进展,主要包括N-甲基吗啉-N-氧化物(NMMO)在85℃以上高温可破坏纤维素分子间氢键,导致溶解;氯化锂/二甲基乙酰胺(LiCl/DMAc)在100℃以上可溶解纤维素;1-丁基-3-甲基咪唑盐酸盐([BMIM]Cl)和1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)离子液体,含强氢键受体Cl-离子,通过它们与纤维素羟基作用而引起溶解.氨基甲酸酯体系则是通过尿素与纤维素在100℃以上反应转变为纤维素氨基甲酸酯,然后再溶解于NaOH水溶液中;氢氧化钠/水体系,只能溶解结晶度和聚合度较低的纤维素;NaOH/尿素、NaOH/硫脲和LiOH/尿素水溶液体系,它们预冷至-5~-12℃后可迅速溶解纤维素.主要是通过低温产生小分子和大分子间新的氢键网络结构,导致纤维素分子内和分子间氢键的破坏而溶解,同时尿素或者硫脲作为包合物客体阻止纤维素分子自聚集使纤维素溶液较稳定.低温溶解技术不仅突破了加热溶解的传统方法,而且可推进化学"绿色化"进程.共引用参考文献50篇.     

Carbon nanotube-enhanced separation of DNA fragments by a portable capillary electrophoresis system with contactless conductivity detection

It was demonstrated that separation of DNA fragments by a CE-contactless conductivity detection system (CE-CCD) could be enhanced with multiple-wall carbon nanotubes (MWCNs) as buffer additive. For HaeIII digest of PhiX174 DNA, optimized MWCN concentration was obtained when the MWCN was above its threshold concentration, at which MWCN could form a network in the buffer as pseudostationary phase to provide additional interaction sites. In the case of larger DNA, MWCN near or below its threshold concentration was enough to provide great improvement of the resolution, which was shown by the separation of the 2-Log DNA ladder. Furthermore, the buffer containing MWCN could provide a more stable baseline in the CE-CCD system, owing to less fluctuation of its conductivity. Compared with CE-UV, CE-CCD with MWCN could provide lower LODs as well as better resolution.     

Bioethanol Production from Uncooked Raw Starch by Immobilized Surface-engineered Yeast Cells

Surface-engineered yeast Saccharomyces cerevisiae codisplaying Rhizopus oryzae glucoamylase and Streptococcus bovis α-amylase on the cell surface was used for direct production of ethanol from uncooked raw starch. By using 50 g/L cells during batch fermentation, ethanol concentration could reach 53 g/L in 7 days. During repeated batch fermentation, the production of ethanol could be maintained for seven consecutive cycles. For cells immobilized in loofa sponge, the concentration of ethanol could reach 42 g/L in 3 days in a circulating packed-bed bioreactor. However, the production of ethanol stopped thereafter because of limited contact between cells and starch. The bioreactor could be operated for repeated batch production of ethanol, but ethanol concentration dropped to 55% of its initial value after five cycles because of a decrease in cell mass and cell viability in the bioreactor. Adding cells to the bioreactor could partially restore ethanol production to 75% of its initial value.     

原子力显微镜原位观察球晶界面上片晶的生长

当结晶聚合物由熔融冷却或从浓溶液中析出结晶时 ,在不存在应力和流动的情况下 ,一般形成球晶 .球晶在一定的生长时期内呈现球形外观 ,在偏光显微镜下通常呈现Maltese黑十字消光图样 .球晶作为一种常见的结晶形态 ,由片晶堆积而成[1,2 ] .Keith和Padden认为形成球晶的体系包含杂质和聚合物链 ,由于杂质在片晶生长界面的富集导致片晶产生小角度分叉 ,这样片晶能填满球状的空间[1,2 ] .近年来的研究表明球晶是由一个片晶开始生长 ,片晶在生长过程中不断的诱导成核使片晶分叉 ,首先形成片晶捆束 ,然后片晶向各个方向发散生长 ,最终形成球晶[3…     

Chemical lithography of a conductive polymer using a traceless removable group

Polyaniline could be easily converted into nitrosated polyaniline by reaction with nitrite ion in acids. The product is soluble in common solvents and could be deposited into thin films. The nitrosated polyaniline could be back-converted into polyaniline by acid hydrolysis. On the basis of those properties, a simple chemical lithographic process to produce conductive polyaniline images is demonstrated.     

磷肥和硒施用对稻米硒、钙、锌等营养累积的影响

研究了施用不同水平磷肥和硒对稻米中硒、钙、锌、镁、硫等人体必需营养吸收累积的影响。结果表明，适量施磷，降低米中硒含量；大量施磷，又促进硒在米中累积。施磷肥一般不利于钙和锌在稻米中累积，适量施磷增加稻米中镁、硫含量，而过量施用磷肥显著降低钙、锌、镁、硫等矿质营养的含量，影响稻米营养品质。适量施硒，一般提高稻米的矿质营养含量；过量施硒，特别在高磷水平下则降低矿质营养含量。     

2D elemental analysis approach in focused neutron beam induced prompt gamma-ray analysis at JAEA

We have constructed a new system which could analyze a position distribution of several elements in a sample with 2 dimensional prompt γ-ray analysis (2D PGA) system using focused neutron beam at JAEA. We aimed that the system could analyze local information in a sample with a good signal γ-ray from interested elements to noise of background γ-ray ratio. As a result, this system could determine the position resolution and spatial resolution within 1 mm.