‘Me2CuLi·TMSCl in CH2Cl2’. The most powerful methylating agent for sterically congested α,β-enoates

The reaction of Me₂CuLi with sterically congested α,β-unsaturated esters in the presence of TMSCl in CH₂Cl₂ proceeded very smoothly to produce the conjugate addition products in high yields.     

A facile and efficient ZrCl4 catalyzed conversion of aldehydes to geminal-diacetates and dipivalates and their cleavage

A novel, mild and efficient method has been developed for the preparation of geminal-diacetates and dipivalates in high yields through a reaction of aldehydes with acetic anhydride or pivalic anhydride using Zirconium (IV) chloride as a catalyst under solvent free conditions. Regeneration of aldehydes from the acylals was also achieved using the same catalyst in CH₃OH.     

Total oxidation of chlorinated hydrocarbons on LaMnO3 perovskite type catalyst

The total oxidation of CH₃Cl, CH₂Cl₂ and ClH₂C-CH₂Cl has been investigated on a LaMnO₃ perovskite type catalyst. Depending on the reaction temperature, a reversible deactivation of the catalyst was observed. Small amounts of by-products were formed at low reaction temperatures.     

P(i-PrNCH2CH2)3N: An efficient nonionic catalyst for the regioselective Michael addition of a β,γ-unsaturated ester and a nitrile

Michael additions of a β,γ-unsaturated ester and a nitrile to a variety of α,β-unsaturated ketones can be effected with high regioselectivity and in good yields using P(i-PrNCH₂CH₂)₃N as a catalyst.     

IBX/n-Bu4NBr/CH2Cl2-H2O: a new mild system for selective oxidation of secondary alcohols

A new alternative system for the chemoselective oxidation of secondary hydroxyl group to ketone with IBX/n-Bu₄NBr in CH₂Cl₂-H₂O has been developed. Under the reaction conditions, the secondary hydroxyl group was highly chemoselectively oxidized to the corresponding ketone, in moderate to good yields at rt, in the presence of primary hydroxyl group within the same molecule.     

A practical and efficient method for the preparation of sulfonamides utilizing Cl3CCN/PPh3

Cl₃CCN in combination with PPh₃ proved to be a highly reactive reagent for the conversion of sulfonic acids to the corresponding sulfonyl chlorides in refluxing CH₂Cl₂. Upon reaction with amines, the corresponding sulfonamides were obtained in good to excellent yields.     

A mild and efficient selective tetrahydropyranylation of primary alcohols and deprotection of THP ethers of phenols and alcohols using PdCl2(CH3CN)2 as catalyst

Primary alcohols were selectively tetrahydropyranylated in good to excellent yields at room temperature using PdCl₂(CH₃CN)₂ as catalyst in tetrahydrofuran (THF) in the presence of phenols, secondary, and tertiary alcohols. The tetrahydropyranyl (THP) group could be efficiently removed using PdCl₂(CH₃CN)₂ as catalyst in CH₃CN, while other protection groups such as p-toluenesulfonyl (Ts), tert-butyldiphenylsilyl (TBDPS), benzyloxycarbonyl (Cbz), allyl, benzyl (Bn), and benzoyl (Bz) remained intact under these conditions.     

MoO2Cl2 as a novel catalyst for Friedel-Crafts acylation and sulfonylation

The use of MoO₂Cl₂ as a novel catalyst for Friedel-Crafts acylation and sulfonylation is described. A series of aromatic ketones and sulfones were prepared in moderate to good yields using acyl chloride or sulfonyl chloride in the presence of MoO₂Cl₂ (20 mol %), under solvent-free conditions.     

Me3Ga-mediated alkynylation of aldehydes

The trimethylgallium reagent was found to promote the addition of phenylacetylene to various aromatic and aliphatic aldehydes. This reaction was efficiently carried out in anhydrous CH₂Cl₂ at room temperature under mild conditions and the corresponding propargylic alcohols were obtained in good to excellent yields up to 98%.     

Thermally stable rigid π-allylnickel compounds, (π-CHRCR′CR2)Ni(PPhMe2)C6Cl5

The reaction of C₆Cl₅Ni(PPhMe₂)₂Cl with CHRCR′CH₂MgX (X = Br or Cl) yields π-allylnickel compounds, (π-CHRCR′CH₂)Ni(PPhMe₂)C₆Cl₅ (Ia, R = R′ = H; Ib, R = H, R′ = CH₃; Ic, R = CH₃, R′ = H), which are stable in the solid state below ca. 150°C and are fairly stable in solution in the absence of oxygen. The π-allyl group was found by PMR spectroscopy to be rigid even in the presence of an excess of PPhMe₂, P(OEt)₃ or P(OMe)₃.     

Photodissociation of CH3Cl+ and CH3Br+ in a tandem quadrupole mass spectrometer

A new tandem quadrupole photodissociation mass spectrometer was used to measure photodissociation cross sections for the reactions, CH₃Cl⁺ → CH₃⁺ + Cl and CH₃Br⁺ → CH₃⁺ + Br in the gas phase using wavelength-selected light. The results on CH₃Cl⁺ are compared with the earlier work of Dunbar. For both reactions we are able to observe photodissociations occurring with small cross sections (≈ 2 × 10^?20 cm²) in the visible region near the thermochemical thresholds.     

Slow energy transfer between vibrational models of CH2Cl2, CD2Cl2, CH2ClBr and CH2Br2

Inefficient vibrational energy exchange between the lowest vibrational mode and the higher lying vibrational modes of CH₂Cl₂, CD₂Cl₂, CH₂ClBr and CH₂Br₂ was investigated by ultrasonic absorption experiments. Breathing sphere theory is used to interpret the data available for VV and VR, T transfer in methylene halides.     

Control of site selectivity in trifluoromethylation of alkenes bearing a pendant indolyl group: Synthesis of CF3-containing tetrahydrocarbazoles

We present a tetrahydrocarbozole-forming carbo-trifluoromethylation of indoles bearing an alkenyl group at the C3 position. The reaction proceeded selectively with the combination of TsOH·H₂O as a catalyst and CH₂Cl₂ as a solvent. The site-selectivity could be altered by changing the reaction solvent; the use of THF instead of CH₂Cl₂ increased the formation of aromatic trifluoromethylation products.     

A novel method for the reduction of imines using the system silane/MoO2Cl2

A novel catalytic system, silane/MoO₂Cl₂ (10 mol %), for the reduction of imines in excellent to moderate yields and chemoselectivity was designed. These results extend the scope of the use of MoO₂Cl₂ as an effective catalyst for reduction reactions.     

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH CpCH2CH2CH=CH2)2MCl2(M=Zr,Hf)AND Cp2ZrCl2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ~(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.     

35Cl Nqr spectroscopy of the [PO2Cl2]− and POCl3 groups in Me(PO2Cl2)2·2D (Me = Mg,Ca, Mn; D = POCl3,CH3COOC2H5,CH3COCH3)

³⁵Cl NQR spectra of dichlorophosphates Me(PO₂Cl₂)₂ · 2D (Me = Mg, Ca, Mn; D = CH₃COOC₂H₅, CH₃COCH₃, POCl₃) are studied in the temperature range 77 ? T (K) ? 305. It is shown that the three compounds with CH₃COOC₂H₅ as donor are isomorphic at 77 K, the crystal structure of Mn(PO₂Cl₂)₂· 2CH₃COOC₂H₅. The structure of Mg(PO₂Cl₂)_2^?· 2CH₃COCH₃ and of Mg(PO₂Cl₂)₂ · 2POCl₃ probably consists of infinite chains as found for Mn(PO₂Cl₂)₂· 2CH₃COOC₂H₅. Mg(PO₂Cl₂)₂· 2CH₃COOC₂H₅ shows phase transformations and a complicated dynamical behaviour leading to strong deviations from a Bayertype NQR function v = f(T). The donor capacity of POCl₃ in Mg(PO₂Cl₂)₂· 2POCl₃ is comparable with the donor strength in AsCl₃ · POCl₃ · A d_π-p_π overlap of the P-O bond influences the P-Cl bond.     

Electron spin resonance studies of ziegler-natta-type catalysts. The complex derived from dichlorobis (η-cyclopentadienyl) vanadium (Cp2VCl2) with ethylaluminium sesquichloride to polymerize ethylene

The reaction between Cp₂VCl₂ (Cp = η-cyclopentadienyl) in CH₂Cl₂ and Et₃Al₂Cl₃ or Et₂AlCl in η-heptane yields three paramagentic species giving the ESR parameters a_γ = 4.11 mT, g = 1.991 (I); a_γ = 7.46 mT, g = 1.982 (II); a_γ = 7.398 mT, g = 1.985 (III). Ethylene was polymerized using these catalysts; the solution was examined by the electron spin resonance technique before the polymerization and during the course of the reaction. The catalyst activity decayed quickly, and the mechanism of the reaction is discussed.     

Rapid and highly selective epoxidation of alkenes by tetrabutylammonium monopersulfate in the presence of manganese meso-tetrakis(pentafluorophenyl)porphyrin and tetrabutylammonium salts or imidazole co-catalysts

Epoxidation of various alkenes in low to high yields (29-100%) and good to excellent selectivities (75-100%) was performed with tetrabutylammonium monopersulfate in the presence of meso-tetrakis(pentafluorophenyl)porphyrin as catalyst and tetrabutylammonium acetate or fluoride or imidazole as co-catalysts in CH₂Cl₂, in less than 10 min at room temperature (∼25 °C).     

Oxidatively induced glycosylation starting from hydroquinone glycosides

As a new class of glycosyl donors, hydroquinone glycosides can be used for glycosylation reactions. Their activation can be performed either electrochemically or under homogeneous chemical conditions. Conventionally, several glucosides were produced with yields greater than 77% using DDQ in CH₂Cl₂ as oxidizing agent. For electrolyses, glycosides of trimethylhydroquinone are preferably used because their low oxidation potentials allow the utilization of an undivided cell. The synthesis of the glycosyl donors was achieved with high efficiency by direct coupling of the phenols with peracetylated monosaccharides employing boron trifluoride etherate as the catalyst. The oxidation of hydroquinone derivatives can also be applied to the generation of other stabilized cations.     

SnCl4 and SbCl5 promoted aromatization of enamines

Aromatic amines have been synthesized efficiently from enamines using SnCl₄ and SbCl₅ in CH₂Cl₂ at room temperature.