Na4H3[SiW9Al3(H2O)3O37]·12H2O/H2O: a new system for selective oxidation of alcohols with H2O2 as oxidant

This work describes a catalytic system consisting of both Na₄H₃[SiW₉Al₃(H₂O)₃O₃₇]·12H₂O(SiW₉Al₃) and water as solvents (a small quantity of organic solvents were used as co-solvent for a few substrates) that can be good for selective oxidation of alcohols to ketones (aldehydes) using 30% H₂O₂ without any phase-transfer catalyst under mild reaction conditions. The catalyst system allows easy product/catalyst separation. Under the given conditions, the secondary hydroxyl group was highly chemoselectively oxidized to the corresponding ketones in good yields in the presence of primary hydroxyl group within the same molecule, and hydroxides are selectively oxidized even in the presence of alkene. Benzylic alcohols were selectively oxidized to the corresponding benzaldehydes in good yields without over oxidation products in solvent-free conditions. Nitrogen, oxygen, sulfur-based moieties, at least for the cases where these atoms are not susceptible to oxidation, do not interfere with the catalytic alcohol oxidation.     

One pot synthesis using supported reagents system KSCN/SiO2-RNH3OAc/Al2O3: synthesis of 2-aminothiazoles and N-allylthioureas

A simple and efficient method has been developed for the synthesis of 2-aminothiazoles and N-allylthioureas from commercially available materials in one pot by using a supported reagents system, KSCN/SiO₂-RNH₃OAc/Al₂O₃, in which α-halo ketone reacts first KSCN/SiO₂ and the product, α-thiocyanatoketone, reacts with RNH₃OAc/Al₂O₃ to give the final product, 2-aminothiazoles, in good yield and allyl bromide reacts with KSCN/SiO₂ and the product, allyl isothiocyanate, reacts with RNH₃OAc/Al₂O₃ to give N-allylthiourea.     

The synthesis and characterization of α- and β-1, 1-diiodo-3,4-benzo-1-telluracyclopentane,C8H8Tel2

Elemental Tellurium reacts with α,α′-dichloro-o-xylene and NaI in 2-methoxyethanol to form 1,1-diiodo-3,4-benzo-1-telluracyclopentane in 83% yield. C₈H₈TeI₂ is molecular in acetone, methylene chloride and methyl ethyl ketone, but ionic in DMF. Two crystalline modifications of the compound have been isolated from 2-methoxyethanol. The yellow-orange or α form is monoclini?, space group P2₁/c; the orange-red or β form is also monoclinic, space group I2/c. Infrared, optical and mass spectral data, along with solution UV, NMR, molecular weight and conductivity data, suggest that the two crystalline modifications are plymorphs, possibly differing in the degree and type of heavy atom interaction. In 2-methoxyethanol the β form undergoes a solution phase transformation to the stable α form. Both forms are thermochromic.     

Structure de La2Fe2S5 et de La2Fe1.87S5

The compound La₂Fe₂S₅ is orthorhombic. Cell parameters are: a = 3.997(2)Å; b = 16.485(5)Å; c = 11.394(4)Å. Space group is Cmc2₁ (Z = 4. In the cell, chains of polyedra comprised of sulfur atoms tetrahedrally or octahedrally coordinating centrally located iron atoms give a monodimensional character to the structure. This one is refined to R = 0.037. To complete the study of these chains, in the La₂Fe_2?xS₅ system, vacancies are introduced on iron atom sites. The ordered compound, La₂Fe_1.87S₅, having such vacancies, is an orthorhombic superstructure of the stoechiometric compound. Cell parameters are: a = 3.9996(5)Å; b = 49.508(3)Å; c = 11.308(3)Å. Space group is Cmc2₁ and Z = 12. The structure is refined to R = 0.068. Only two iron atom sites have vacancies. One is tetrahedral, the other octahedral. In this last case the chain deformations are the more important. The chain becomes a sort of tunnel made of atoms of sulfur, with in its center the short iron-iron separation of 2.82 Å.     

Synthesis of β-hydroxymalonates: the direct aldol addition of malonates to aldehydes in the presence of SiCl4 and i-Pr2EtN

The direct aldol addition of malonates to aromatic, hetero-aromatic and unsaturated aldehydes leading to β-hydroxymalonates is described. The stability of these products, the trimethyl silyl protection of the hydroxyl group as well as the role of both SiCl₄ and i-Pr₂EtN in attaining the final products are also discussed.     

Single crystal Raman study of potassium oxalate monohydrate,K2C2O4. H2O,and potassium oxalate monodeuterate,K2C2O4. D2O

Raman spectra of poly crystalline and single crystal K₂C₂O₄. H₂O and K₂C₂O₄. D₂O have been recorded at room temperature. From an earlier neutron diffraction study it is known that the space group is C⁶₂h. The water molecule occupies a C₂ site and the oxalate ion a C₁ site. The assigned water vibrations show small factor group splitting between g modes (Raman active) and u modes (IR active). The internal oxalate vibrations are found to have wavenumbers in good agreement with those reported from Raman studies of other oxalates.     

Investigations into the selective oxidation of vicinal diols to α-hydroxy ketones with the NaBrO3/NaHSO3 reagent: pH dependence, stoichiometry, substrates and origin of selectivity

The NaBrO₃/NaHSO₃ reagent is one of the few oxidizing agents that chemoselectively oxidizes vicinal diols to α-hydroxy ketones with little overoxidation to the corresponding vicinal-dione or dicarboxylic acid. Oxidation reactions performed with this reagent showed strong pH dependence. cis-Vicinal diols reacted faster than trans-vicinal diols to the α-hydroxy ketone product. Hydroxy functional groups at axial ring positions were more readily oxidized than equatorial hydroxy groups. The application of the NaBrO₃/NaHSO₃ reagent for the chemoselective oxidation of vicinal diols was limited to simple systems and failed with more complex monosaccharide compounds probably due to acid catalyzed dehydrogenation reactions. Despite the simple reaction set-up and good selectivity towards the α-hydroxy ketone product, the actual oxidation reaction mechanism is highly complex and postulated to involve at least six different equilibria with a plethora of bromine containing species. A possible oxidation reaction mechanism is discussed.     

One-dimensional inorganic arrangement in the bismuth oxalate hydroxide Bi(C2O4)OH

Single crystals of Bi(C₂O₄)OH were obtained by the slow diffusion of Bi³⁺ cations through silica gel impregnated with oxalic acid. The structure was solved in the Pnma space group with a=6.0853(2) Å, b=11.4479(3) Å, c=5.9722(2) Å, leading to R=0.0188 and wR=0.0190 from 513 unique reflections. The bismuth coordination polyhedron is a BiO₆E pentagonal bipyramid with the lone pair E sitting at an axial vertex. The opposite axial vertex is occupied by a hydroxyl oxygen atom, which is also an equatorial corner of a neighboring BiO₆E bipyramid. The sharing of the hydroxyl oxygen atoms build zig-zag chains running down the [100] direction. These chains are aligned in a sheet parallel to the (010) plane and are further connected through oxalate ions to form a three-dimensional arrangement. On heating, Bi(C₂O₄)OH decomposes to the meta-stable quadratic β-Bi₂O₃ phase.     

InCl3-CH3CN-H2O: an efficient catalyst-solvent combination for the synthesis of Perlin aldehydes and related compounds. Application in the synthesis of unnatural l-azasugars

InCl₃-CH₃CN-H₂O has been found to be an efficient catalyst-solvent combination for the synthesis of Perlin aldehydes and related compounds. While acetylated glycals afforded the Perlin aldehydes directly with InCl₃ and water, benzylated glycals on the other hand provided the hemiacetals under identical condition. The methodology reports a non-mercurial approach to Perlin aldehydes. Noteworthy is that this reaction is more facile as well as highly selective with glycals possessing a hydroxyl as a leaving group than with a benzyloxy group. Extension of this reaction to 2-C-hydroxymethyl glycals resulted in the formation of the corresponding hemiacetals, which were further transformed in to unsaturated azasugars with an exo-methylene group at C-2 position. Glycosidase inhibition studies reveal that these compounds display selectivity in inhibiting glucosidases rather than galactosidases.     

[Ni(H2O)4]3[U(OH,H2O)(UO2)8O12(OH)3], crystal structure and comparison with uranium minerals with U3O8-type sheets

The new U(VI) compound, [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃], was synthesized by mild hydrothermal reaction of uranyl and nickel nitrates. The crystal-structure was solved in the P-1 space group, a=8.627(2), b=10.566(2), c=12.091(4) Å and α=110.59(1), β=102.96(2), γ=105.50(1)°, R=0.0539 and wR=0.0464 from 3441 unique observed reflections and 151 parameters. The structure of the title compound is built from sheets of uranium polyhedra closely related to that in β-U₃O₈. Within the sheets [(UO₂)(OH)O₄] pentagonal bipyramids share equatorial edges to form chains, which are cross-linked by [(UO₂)O₄] and [UO₄(H₂O)(OH)] square bipyramids and through hydroxyl groups shared between [(UO₂)(OH)O₄] pentagonal bipyramids. The sheets are pillared by sharing the apical oxygen atoms of the [(UO₂)(OH)O₄] pentagonal bipyramids with the oxygen atoms of [NiO₂(H₂O)₄] octahedral units. That builds a three-dimensional framework with water molecules pointing towards the channels. On heating [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃] decomposes into NiU₃O₁₀.     

Syntheses and characterizations of complex perovskite oxynitrides LaMg1/3Ta2/3O2N, LaMg1/2Ta1/2O5/2N1/2, and BaSc0.05Ta0.95O2.1N0.9

The following complex oxynitride perovskites have been prepared: LaMg_1/3Ta_2/3O₂N, LaMg_1/2Ta_1/2O_5/2N_1/2, and BaSc_0.05Ta_0.95O_2.1N_0.9. Synchrotron X-ray powder diffraction analyses show that LaMg_1/3Ta_2/3O₂N and LaMg_1/2Ta_1/2O_5/2N_1/2 are isostructural to the oxide La₂Mg(Mg_1/3Ta_2/3)O₆ (space group P2₁/n), whereas BaSc_0.05Ta_0.95O_2.1N_0.9 has a simple cubic symmetry similarly to BaTaO₂N. The orderings of octahedral cations are markedly diminished in the above oxynitrides, as compared with the related oxides such as La₂Mg(Mg_1/3Ta_2/3)O₆ and Ba₂ScTaO₆. The optical band gaps are similar for the homologous compositions, LaMg_1/3Ta_2/3O₂N, LaMg_1/2Ta_1/2O_5/2N_1/2 and LaTaON₂ (1.9 eV), and BaSc_0.05Ta_0.95O_2.1N_0.9 and BaTaO₂N (1.8 eV), while the absorption edges become broader for the complex derivatives. As revealed from the impedance spectroscopic analysis, the oxynitrides have clearly different dielectric components from those of comparable oxides containing Ta⁵⁺. Impedance spectroscopy reveals interesting capacitor geometry in BaSc_0.05Ta_0.95O_2.1N_0.9 in which the semiconducting oxynitride grains are separated by insulating secondary phases. Most notably BaSc_0.05Ta_0.95O_2.1N_0.9 has a bulk component with a high relative permittivity (κ=7300) and the grain boundary component with an even higher κ.     

gem-Difluorosubstituted NH-azomethine ylides in the synthesis of 4-fluorooxazolines via the three-component reaction of imines, trifluoroacetophenones and CF2Br2

A simple one-step synthesis of a new class of fluorinated heterocycles, 4-fluoro-3-oxazolines, from diarylmethanimines, trifluoroacetophenones and CF₂Br₂ is described. The reaction proceeds via the sequential formation of difluorocarbene and a gem-difluorosubstituted NH-azomethine ylide, followed by 1,3-dipolar cycloaddition with a ketone.     

Crystal structures of phosphomolybdyl salts: Pb(MoO2)2(PO4)2 and Ba(MoO2)2(PO4)2

Crystal structures of Pb(MoO₂)₂(PO₄)₂ and Ba(MoO₂)₂(PO₄)₂ were determined. Both compounds contain the molybdyl group MoO₂. The monoclinic unit-cell parameters are a = 6.353(7), b = 12.289(4), c = 11.800 Å, β = 92°56(6), and Z = 4 for the lead salt and a = 6.383(8), b = 7.142(7), c = 9.953(8) Å, β = 95°46(8), and Z = 2 for the barium salt. $\text{P2}{}_1\text{c}$ is the common space group. The R values are respectively R = 0.027 and R = 0.031 for 1964 and 1714 independent reflections. The frameworks built up by a three-dimensional network of monophosphate PO₄ and molybdyl MoO₂ groups are similar, characterized mainly by corner-sharing PO₄ and MoO₆ polyhedra. Two oxygen atoms of each MoO₆ group are bonded to the molybdenum atom only as in other molybdyl salts.     

Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Crystal structure and magnetic properties of Co2TeO3Cl2 and Co2TeO3Br2

The crystal structures of the two new synthetic compounds Co₂TeO₃Cl₂ and Co₂TeO₃Br₂ are described together with their magnetic properties. Co₂TeO₃Cl₂ crystallize in the monoclinic space group P2₁/m with unit cell parameters a=5.0472(6) Å, b=6.6325(9) Å, c=8.3452(10) Å, β=105.43(1)°, Z=2. Co₂TeO₃Br₂ crystallize in the orthorhombic space group Pccn with unit cell parameters a=10.5180(7) Å, b=15.8629(9) Å, c=7.7732(5) Å, Z=8. The crystal structures were solved from single crystal data, R=0.0328 and 0.0412, respectively. Both compounds are layered with only weak interactions in between the layers. The compound Co₂TeO₃Cl₂ has [CoO₄Cl₂] and [CoO₃Cl₃] octahedra while Co₂TeO₃Br₂ has [CoO₂Br₂] tetrahedra and [CoO₄Br₂] octahedra. The Te(IV) atoms are tetrahedrally [TeO₃E] coordinated in both compounds taking the 5s² lone electron pair E into account. The magnetic properties of the compounds are characterized predominantly by long-range antiferromagnetic ordering below 30 K.     

Magnetic diphase nanostructure of ZnFe2O4/γ-Fe2O3

Magnetic diphase nanostructures of ZnFe₂O₄/γ-Fe₂O₃ were synthesized by a solvothermal method. The formation reactions were optimized by tuning the initial molar ratios of Fe/Zn. All samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, and Raman spectra. It is found that when the initial molar ratio of Fe/Zn is larger than 2, a diphase magnetic nanostructure of ZnFe₂O₄/γ-Fe₂O₃ was formed, in which the presence of ZnFe₂O₄ enhanced the thermal stability of γ-Fe₂O₃. Further increasing the initial molar ratio of Fe/Zn larger than 6 destabilized the diphase nanostructure and yielded traces of secondary phase α-Fe₂O₃. The grain surfaces of diphase nanostructure exhibited a spin-glass-like structure. At room temperature, all diphase nanostructures are superparamagnetic with saturation magnetization being increased with γ-Fe₂O₃ content.     

Catalytic oxidation of diorganotin(IV) carboxylates to mixed-ligand monoalkyltin(IV) carboxylates by Ag and structure characterization of the mixed-ligand monoalkyltin(IV) 2-pyridinecarboxylate (2-ClPhCH2)Sn(2-ClPhCO2)(O2CC5H4N-2)2

The complexes of the type (ArCH₂)₂SnO were catalytic-oxygenated by Ag⁺ and yielded mixed-ligand organotin(IV) complexes (ArCH₂)(2-C₅H₄NCO₂)₂(ArCOO)tin(IV) (Ar = C₆H₅ (1), 2-ClC₆H₄ (2), 2-CNC₆H₄ (3), 4-ClC₆H₄ (4), 4-CNC₆H₄ (5), 2-FC₆H₄ (6)). The complexes 1-6 are characterized by elemental analyses, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopies. Single X-ray crystal structure analysis has been determined, which reveals that the center tin atom of complex 2 is seven-coordinated geometry.     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

Crystal structure of Fe2P2O7

Fe₂P₂O₇ crystallizes in the $\text{C}\text{1}$ space group with lattice parameters a = 6.649(2)Å, b = 8.484(2)Å, c = 4.488(1)Å, α = 90.04°, β = 103.89(3)°, γ = 92.82(3)°, and ?_cal = 3.86 g/cc. It is essentially isostructural with β-Zn₂P₂O₇. As in the Zn compound, the bridging oxygen atom in the P₂O₇ group shows a high anisotropic thermal motion. It appears that the P-O-P bond angle is linear as a result of extensive π bonding with the p orbitals on the bridging oxygen atom. The high thermal motion is vibration of the atom into cavities in the structure.     

Structural study of the NaCdVO4-Cd3V2O8 and CdO-V2O5 sections of the ternary system Na2O-CdO-V2O5

The NaCdVO₄-Cd₃V₂O₈ and CdO-V₂O₅ sections of the ternary system Na₂O-CdO-V₂O₅ have been studied and the crystal structures of Cd₃V₂O₈ and Cd₁₈V₈O₃₈ compounds were determined from single-crystal X-ray diffraction data. Cd₃V₂O₈ crystallizes with the maricite-type structure in space group Pnma, a=9.8133(10) Å, b=6.9882(10) Å, c=5.3251(10) Å and Z=4, whereas Cd₁₈V₈O₃₈ crystallizes in space group P1 with a new-type structure, a=8.5761(14), b=8.607(3), c=12.896(2) Å, α=95.64(1), β=102.45(1), γ=108.42(1)° and Z=1. The Cd₃V₂O₈ structure is made up of Cd1O₄ infinite chains of edge-sharing Cd1O₆ octahedra which are parallel to the b direction. The Cd1O₄ chains are linked together by VO₄ tetrahedra and strongly distorted Cd2O₄ tetrahedra. The structure of Cd₁₈V₈O₃₈ is based on an ordered three-dimensional framework of cadmium and vanadium polyhedra that share corners. The distorted CdO₆ octahedra, CdO₅ trigonal bipyramids and CdO₅ square pyramids share corners, edges or faces.