旋光性聚{(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯}的合成与表征

设计、合成了一个带有横挂三联苯侧基的手性乙烯基单体——(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯,进行了普通自由基和原子转移自由基聚合反应.所得聚合物具有比单体低30°左右的比旋光度,且在侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明其主链可能形成了具有相反旋光方向的螺旋构象.在所研究范围内,聚合条件对聚合物的旋光度没有明显的影响.在分子量较小时,聚合物的比旋光度随着分子量的增加而降低,说明主链螺旋构象的贡献在增大,而当分子量达到一定值后,聚合物的比旋光度不再随分子量的增加而显著变化.     

乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯的合成及其螺旋选择性自由基聚合

设计合成了手性单体（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯,并进行了自由基溶液聚合.相比于单体,聚合物的比旋光度有显著的同向增长,且在其圆二色光谱上对应于三联苯侧基以及酯基的吸收区域呈现明显的Cotton效应,说明其主链可能采取某一旋向占优的螺旋构象.研究了聚合条件对聚合物旋光性质的影响.结果表明,采用极性大的芳香族溶剂或增加单体浓度有利于获得旋光度大的聚合物;随聚合温度增加,聚合物旋光度先增加后减小,在80℃时聚合达到最大值.该聚合物比甲基丙烯酸三芳基甲基酯类光学活性螺旋链聚合物具有更好的化学结构稳定性和立体结构稳定性.     

基于2,5-二(4′-甲酰基苯基)苯乙烯的螺旋链光学活性聚合物的合成与表征

通过2,5-二溴苯乙烯与对甲酰基苯硼酸的Suzuki偶联反应得到2,5-二(4′-甲酰基苯基)苯乙烯.在催化剂量的冰乙酸存在下,与光学纯的(S)-(-)-α-甲基苄胺或(R)-(+)-α-甲基苄胺发生缩和反应,得到了一对手性非外消旋单体,(+)-2,5-二{4-′[(N-(S)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯和(-)-2,5-二{4′-[(N-(R)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯.以偶氮二异丁腈(AIBN)或过氧化苯甲酰(BPO)为引发剂,经自由基溶液聚合得到光学活性聚合物.比旋光度、紫外-可见吸收光谱以及圆二色光谱研究表明,聚合物主链可能形成了某一方向占优的稳定螺旋构象,且该螺旋构象的旋光方向与单体的旋光方向相反.聚合条件对聚合物的光学活性有很大影响,在极性较大的芳香族溶剂和较高温度下得到的聚合物具有和单体相差更大的比旋光度.侧基的手性基团脱除后,聚合物仍具有一定的旋光性,说明聚合过程中形成的螺旋手性具有一定的记忆效应.     

基于2,5-二(4''''-甲酰基苯基)苯乙烯的螺旋链光学活性聚合物的合成与表征

通过2,5-二溴苯乙烯与对甲酰基苯硼酸的Suzuki偶联反应得到2,5-二(4'-甲酰基苯基)苯乙烯.在催化剂量的冰乙酸存在下,与光学纯的(S)-(-)-α-甲基苄胺或(R)-( )-α-甲基苄胺发生缩和反应,得到了一对手性非外消旋单体,( )-2,5-二{4'-[(N-(S)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯和(-)-2,5-二{4'-[(N-(R)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯.以偶氮二异丁腈(AIBN)或过氧化苯甲酰(BPO)为引发剂,经自由基溶液聚合得到光学活性聚合物.比旋光度、紫外-可见吸收光谱以及圆二色光谱研究表明,聚合物主链可能形成了某一方向占优的稳定螺旋构象,且该螺旋构象的旋光方向与单体的旋光方向相反.聚合条件对聚合物的光学活性有很大影响,在极性较大的芳香族溶剂和较高温度下得到的聚合物具有和单体相差更大的比旋光度.侧基的手性基团脱除后,聚合物仍具有一定的旋光性,说明聚合过程中形成的螺旋手性具有一定的记忆效应.     

以苯甘氨酸基为侧链的光学活性甲基丙烯酰胺聚合物的合成及手性识别能力

合成了N-[(R)-α-叔丁氧基羰基苄基]甲基丙烯酰胺((R)-BCBMAM),通过自由基聚合法获得相应的光学活性聚合物(P(R-BCBMAM)),并以三氟乙酸为水解催化剂除去叔丁基而得到(P(R-CBMAM)).用1H-NMR,IR,CD和GPC对聚合物进行了结构表征,发现聚合溶剂和聚合物分子量对所得聚合物P(R-BCBMAM)的光学活性没有明显影响,P(R-BCBMAM)水解后光学活性有较大的改变.与单体相比,聚合物的比旋光度有较大的区别,且在对应于其侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明聚合物的主链可能形成了一定的二级结构.以P(R-BCBMAM)和P(R-CBMAM)制备的2种涂敷型高效液相色谱用手性固定相,对部分对映体具有一定的手性拆分能力.利用1H-NMR技术研究了上述2种聚合物与1,1'-联-2-萘酚(BINOL)的相互作用,它们对BINOL都具有良好的手性识别能力.     

含有三氟乙烯基芳基醚侧基的聚丙烯酸酯的合成与表征

研究了聚丙烯酸酯侧基上引入三氟乙烯基芳基醚结构单元的方法. 首先, 合成了含有三氟乙烯基芳基醚侧基的丙烯酸酯单体, 然后通过原子转移自由基聚合实现了该单体的均聚和无规共聚, 得到了含有三氟乙烯基芳基醚侧基的聚丙烯酸酯聚合物, 聚合物的分子量分布较窄. 通过控制共聚投料比, 可以得到具有不同含量三氟乙烯基芳基醚侧基的无规共聚物.     

基于原子转移自由基聚合和“Click”化学方法制备手性色谱固定相

应用原子转移自由基聚合(ATRP)法和"Click"化学方法,以含叠氮基的烯类化合物为单体,在硅胶表面引发聚合,制备了"梳状"手性固定相.该固定相的合成采用"接出"方法接枝聚合物链,使接枝层更为均匀,并且避免了传统合成方法(如物理吸附等)稳定性差的缺点.所得到的"梳状"手性固定相实现了对一些手性药物的分离;并考察了该固定相中聚合物链的密度和长度对其手性分离能力的影响.     

自由基螺旋聚合的研究进展

螺旋聚合物是一类在不对称领域具有特殊用途的高分子,可用于对映体分离、不对称催化和不对称光学等领域。其合成方法的研究一直是合成高分子科学的研究热点。自由基螺旋聚合以其大量优点备受人们重视,但受自由基聚合的自身缺陷影响,在螺旋聚合物合成上成功的例子较少。本文对自由基螺旋聚合的自身缺陷进行探讨,对各种方法进行综述,介绍了手性单体聚合、手性引发剂聚合、手性链转移聚合、手性模板控制聚合和手性溶剂聚合等各种自由基螺旋聚合方法,并对其前景进行了展望。     

单体结构和聚合条件对大体积乙烯基聚合物旋光性质的影响

合成了3种手性大体积烯类单体——(+)-4,4″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(p-BMVT)、(+)-3,3″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(m-BMVT)和(+)-2,2″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(o-BMVT),其中后两个为新化合物.系统研究了单体结构对其聚合反应活性以及单体结构和反应条件对所得聚合物旋光性质的影响.p-和m-BMVT在合适的条件下可以顺利地进行自由基聚合,形成某一旋向占优的手性二级结构;手性取代基在单体分子上移动一个共价键的距离导致聚合物的旋光方向相反.单体o-BMVT的合成产率低且不能进行自由基聚合.提高芳烃类或者降低非芳烃类聚合溶剂的极性、升高反应温度、减少单体浓度有利于得到旋光度大的聚合物.     

Optically Active Helical Vinylterphenyl Polymers: Chiral Teleinduction in Radical Polymerization and Tunable Stereomutation

Helical vinyl aromatic polymers are emerging as interesting chiral materials due to their dynamic tailorability, synthetic simplicity, and outstanding chemical and physical stabilities. This Personal Account discusses long‐range chirality transfer in the radical polymerization of vinylterphenyl monomers and tunable stereomutation of the resultant polymers. It begins with a general introduction to the design, synthesis, and characterization of helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutyloxy)phenyl]styrene}, the first one of this series of polymers. Then, long‐range chirality transfer during radical polymerization of terphenyl‐based vinyl monomers is explained. After that, the chiroptical property control of the resultant polymers by means of the transition from kinetically controlled conformation to thermodynamically controlled conformation and external stimulus is described. This Personal Account concludes by discussing the advantages and disadvantages of the strategy of using vinylterphenyls to obtain optically active helical polymers and providing a short outlook, especially emphasizing the importance of tacticity on the chiroptical properties of polymers.     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

Synthesis of Rod-Coil Block Copolymers using Two Controlled Polymerization Techniques

A double-headed initiator was synthesized yielding two functional groups for the initiation of the nickel mediated ring-opening polymerization of γ-benzyl-L -glutamate-N-carboxyanhydride and controlled radical polymerization of vinyl monomers via ATRP or NMP. Well-defined block copolymers combining polypeptides and synthetic polymers were obtained.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

Cationic RAFT Polymerization Using ppm Concentrations of Organic Acid

A metal‐free, cationic, reversible addition–fragmentation chain‐transfer (RAFT) polymerization was proposed and realized. A series of thiocarbonylthio compounds were used in the presence of a small amount of triflic acid for isobutyl vinyl ether to give polymers with controlled molecular weight of up to 1×10⁵ and narrow molecular‐weight distributions (M_w/M_n<1.1). This “living” or controlled cationic polymerization is applicable to various electron‐rich monomers including vinyl ethers, p‐methoxystyrene, and even p‐hydroxystyrene that possesses an unprotected phenol group. A transformation from cationic to radical RAFT polymerization enables the synthesis of block copolymers between cationically and radically polymerizable monomers, such as vinyl ether and vinyl acetate or methyl acrylate.     

超临界CO2中的高分子合成研究进展

本文介绍以超临界CO₂流体为介质的高分子合成的研究进展。说明可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯和苯乙烯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应。这显示出超临界CO₂是一种对环境无污染且价廉的替代溶剂。     

Side‐chain ferrocene‐containing (meth)acrylate polymers: Synthesis and properties

A comprehensive investigation on the synthesis and properties of a series of ferrocene‐containing (meth)acrylate monomers and their polymers that differ in the linkers between the ferrocene unit and the backbone was carried out. The side‐chain ferrocene‐containing polymers were prepared via atom transfer radical polymerization. The kinetic studies indicated that polymerization of most monomers followed a “controlled”/living manner. The polymerization rates were affected by the vinyl monomer structures and decreased with an increase of the linker length. Methacrylate polymerization was much faster than acrylate polymerization. The optical absorption of monomers and polymers was affected by the linkers. Thermal properties of these polymers can be tuned by controlling the length of the linker between the ferrocene unit and the backbone. By increasing the length of the linker, the glass transition temperature ranged from over 100 to ?20 °C. Electrochemical properties of both monomers and polymers were characterized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel synthesis of photocrosslinkable polymers

A new preparative route to photocrosslinkable polymers in which the polymers are produced directly from the polymerization of vinyl monomers having photocrosslinkable groups has been investigated. The photosensitive resins thus produced have higher sensitivity and resolution than conventional photosensitive resins. The monomers were synthesized from the esterification of vinylphenols or vinyl β-chloroethyl ether with cinnamic acid, β-styrylacrylic acid, and their homologs, and from the etherification of vinyl β-chloroethyl ether with hydroxychalcones. Homopolymerizations of these monomers and their copolymerizations with other comonomers were investigated with the use of both radical and ionic initiators. It is shown that radical polymerization of the monomers gave soluble polymers only at low conversion. Anionic initiators did not initiate polymerization. Cationic polymerization imparted soluble polymers in high yield, except for the monomers bearing cyano groups, which generally gave insoluble polymers. Infrared and NMR spectroscopic investigation of the cationically obtained soluble polymers and comparative investigation by cationic polymerization of model compounds indicated that polymerization of the monomers proceeds through the vinyl double bond without affecting the photosensitive unsaturated bond. Thus, linear photocrosslinkable polymers with an intact photoreactive group may be produced by cationic polymerization. In general, these polymers have uniform structure and modifiable physical properties depending on the monomer used. The polymer thus obtained from β-vinyloxyethyl cinnamate has been shown to have excellent properties for use as a photo-resist.     

Asymmetric anionic polymerizations of 7‐cyano‐7‐alkoxycarbonyl‐1,4‐benzoquinone methides

Asymmetric anionic polymerizations of 7‐cyano‐7‐alkoxycarbonyl‐1,4‐benzoquinone methides ( 1 ) with various alkoxy groups were performed using chiral initiators such as lithium isopropylphenoxide (ⁱPrPhOLi)/(S)‐(–)‐2,2′‐isopropylidene‐bis(4‐phenyl‐2‐oxazoline) ((–)‐PhBox) and lithium isopropylphenoxide (ⁱPrPhOLi)/(–)‐sparteine ((–)‐Sp) to investigate the effect of the alkoxy groups of alkoxycarbonyl substituent in the monomers 1 and chiral ligands of chiral initiators on the control of chiral center in the formation of polymers. Molar optical rotation values of the polymers were significantly dependent upon alkoxy groups, and the polymers with higher molar optical rotation were obtained in monomers with primary alkoxy groups. The asymmetric anionic oligomerizations of the quinone methides having methoxy( 1a ), ethoxy( 1b ), and n‐propoxy( 1c ) groups with chiral initiators were carried out. Both 1‐mers and 2‐mers were isolated and their optical resolutions were performed to determine the extent of stereocontrol. High stereoselectivity was observed at the propagation reaction, but not at the initiation reaction. The effect of the counterion on the control of chiral center in the formation of the polymer was investigated in the asymmetric anionic polymerizations of 1b with ⁱPrPhOM(M = Li, Na, K)/(–)‐Sp and ⁱPrPhOM(M = Li, Na, K)/(–)‐PhBox initiators and discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011