Synthesis of core-shell structured Au@Bi2S3 nanorod and its application as DNA immobilization matrix for electrochemical biosensor construction

The core-shell structured Au@Bi2S3 nanorods have been prepared through direct in-situ growth of Bi2S3 at the surface of pre-synthesized gold nanorods.The product was characterized by X-ray diffraction,transmission electron microscopy and energy-dispersive X-ray spectroscopy.Then the obtained Au@Bi2S3 nanorods were coated onto glassy carbon electrode to act as a scaffold for fabrication of electrochemical DNA biosensor on the basis of the coordination of-NH2 modified on 5’-end of probe DNA and Au@Bi2S3.Electrochemical characterization assays demonstrate that the Au@Bi2S3 nanorods behave as an excellent electronic transport channel to promote the electron transfer kinetics and increase the effective surface area by their nanosize effect.The hybridization experiments reveal that the Au@Bi2S3 matrix-based DNA biosensor is capable of recognizing complementary DNA over a wide concentration ranging from 10 fmol/L to 1 nmol/L.The limit of detection was estimated to be 2 fmol/L(S/N=3).The biosensor also presents remarkable selectivity to distinguish fully complementa ry sequences from basemismatched and non-complementary ones,showing great promising in practical application.     

Photoreduction of CO_2 to methanol over Bi_2S_3/CdS photocatalyst under visible light irradiation

The Bi2S3,CdS and Bi2S3/CdS photocatalysts were prepared by direct reactions between their corresponding salt and thiourea in a hy- drothermal autoclave.The photocatalytic activities of these photocatalysts for reducing CO2 to CH3OH under visible light irradiation have been investigated.The results show that the photocatalytic activity and visible light response of Bi2S3 are higher than those of CdS.The Bi2S3 modification can enhance the photocatalytic activity and visible light response of CdS.The photocatalytic activity of Bi2S3/CdS hetero-junction photocatalyst was the highest and the highest yields of methanol was 613μmol/g when the weight proportion of Bi2S3 to CdS was 15%,which was about three times as large as that of CdS or two times of that of Bi2S3.     

Synthesis of porous hematite nanorods loaded with CuO nanocrystals as catalysts for CO oxidation

Porous hematite (α-Fe2O3) nanorods with the diameter of 20-40 nm and the length of 80-300 nm were synthesized by a simple surfactant-assisted method in the presence of cetyltrimethylammonium bromide (CTAB).The α-Fe2O3 nanorods possess a mesostructure with a pore size distribution in the range of 5-12 nm and high surface area,exhibiting high catalytic activity for CO oxidation.CuO nanocrystals were loaded on the surface of porous α-Fe2O3 nanorods by a deposition-precipitation method,and the catalysts exhibited superior activity for catalytic oxidation of CO,as compared with commercial α-Fe2O3 powders supported CuO catalyst.The enhanced catalytic activity was attributed to the strong interaction between the CuO nanocrystals and the support of porous α-Fe2O3 nanorods.     

Thermal oxide synthesis and characterization of Fe_3O_4 nanorods and Fe_2O_3 nanowires

Fe3O4 nanorods and Fe2O3 nanowires have been synthesized through a simple thermal oxide reaction of Fe with C2H2O4 solution at 200-600℃ for 1 h in the air. The morphology and structure of Fe3O4 nanorods and Fe2O3 nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe3O4 nanorods with cubic structure and the av...     

Promotional Effect of Bismuth as Dopant in Bi-Doped Vanadyl Pyrophosphate Catalysts for Selective Oxidation of n-Butane to Maleic Anhydride

Bismuth-promoted (1% and 3%) vanadyl pyrophosphate catalysts were prepared by refluxing Bi(NO3)3·5H2O and VOPO4·2H2O in isobutanol. The incorporation of Bi into the catalysts lattice increased the surface area and lowered the overall V oxidation state. Profiles of temperature programmed reduction (TPR) in H2 show a significant shift of the maxima of major reduction peaks to lower temperatures for the Bi-promoted catalysts. A new peak was also observed at the low temperature region for the catalyst with 3% of Bi dopant. The addition of Bi also increased the total amount of oxygen removed from the catalysts. The reduction pattern and reactivity information provide fundamental insight into the catalytic properties of the catalysts. Bi-promoted catalysts were found to be highly active (71% and 81% conversion for 1% and 3% Bi promoted catalysts, respectively, at 703 K), as compared to the unpromoted material (47% conversion). The higher activity of the Bi-promoted catalysts is due to that these catalysts possess highly active and labile lattice oxygen. The better catalytic performance can also be attributed to the larger surface area.     

Fabrication of ZnO nanorods in ionic liquids and their photoluminescent properties

A novel and simple approach is reported to fabricate uniform single-crystal ZnO nanorods in ionic liq-uids. The as-obtained ZnO nanorods have been characterized by XRD,TEM,HRTEM,SAED,XPS,EDXA,PL and UV-vis absorption spectra. The rod diameters of the nanostructures can be controlled by tuning the amount of sodium hydroxide in the synthesis. Photoluminescence results show that the nanos-tructural ZnO exhibits better optical properties than bulk ZnO does and interestingly,the smaller the rod diameters are,the better optical property 1D nanostructural ZnO exhibits. The possible growth mechanism of ZnO nanorods is also investigated.     

Active carbon supported S-promoted Bi catalysts for acetylene hydrochlorination reaction

We synthesized a S doped Bi/AC catalyst for acetylene hydrochlorination. The addition of H₂SO₄ changes the structure of the Bi atoms in the catalyst, resulting in the improvement of the specific surface areas and catalytic efficiency of the Bi-based catalyst under reaction conditions.     

Preparation of cauliflower-like bismuth sulfide and its application in electrochemical sensor

A solvothermal process was developed for the preparation of cauliflower-like Bi2S3 from N,N-dimethylformamide （DMF） solution of bismuth nitrate [Bi（NO3）3.5H2O] and thioacetamide （TAA） with 2-undecyl-1-dithioureido-ethyl-imidazoline （SUDEI） as the morphology-controlling agent. The obtained Bi2S3 products were characterized by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, and X-ray diffraction （XRD）, etc. The sensing properties of Bi2S3 with different morphologies were evaluated by the electrochemical analysis of dopamine （DA） and ascorbic acid （AA） coexisting solution. The results showed that cauliflower-like Bi2S3 showed a better resolving ability than rod-like Bi2S3 for the simultaneous determination of DA and AA,     

Decomposition Reaction of Zn-MPA（3-Mercaptopropionic Acid） Complex Under Microwave Irradiation

The thermal decomposition of Zn-MPA complex was investigated under microwave irradiation. ZnO and ZnS nanocrystals could be obtained by decomposing Zn-MPA（3-mercaptopropionic acid） complex under different reaction conditions. It was found that both the pH value of the solution and the molar ratio of Zn2＋ and MPA can play an important role in the formation of ZnO and ZnS nanocrystals. MPA mainly acts as an S source or as a complexing agent. This study provides a new route for the controllable preparation of semiconductor nanocrystals.     

Synthesis of Fulleropyrrolidines under Microwave Irradiation

In recent years, considerable efforts have been devoted to the development of systems in which C60 is covalently linked to an electron donor.[1] Studies[2] on intermolecular photoinduced electron transfer between C60 and triphenyl amine show that triphenyl amine is a good donor. It is envisaged that the use of donor segments consisting of either pyrrole/aniline may extend the lifetime of charge-separated state.[3] Since Gedye[4] demonstrated that many organic reactions can be conducted rapidly under microwave irradiation, here we have successfully synthesized five new fulleropyrrolidines containing triphenyl amine or thiophene dyads under microwave irradiation, which are different from traditional heating. The determination of structures of these fulleropyrrolidines is in progress. On the other hand, we have studied the geometry, electronic structures and frontier orbitals of these N-methyl-pyrrolo[3,4]C60 derivatives by using AM1semiempirical quantum calculation method. The results indicate that there exists strong intramolecular electron transfer in them.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y202S:Eu3+,Bi3+ Phosphor

As an Hg-free lamp using phosphor,the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum uitraviolet(VUV) excitation were investigated.The VUV photolumineseent intensity of Y2O2S:Eu3+ was weak,however,considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems.Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a medium and effectively performs the energy transfer process: Y3+-O2→Bi3+→Eu3+,while the intense emission band at 172 nm is attributed to the absorption of the characteristic 1So-1P1 transition of Bi3+ and the direct energy transfer from Bi3+ to Eu3+.The Y2O2S:Eu3+,Bi3+ shows excellent VUV optical properties compared with the commercial (Y,Gd)BO3:Eu3+.Thus,the Y2O2S:Eu3+,Bi3+ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet(VUV) excitation were investigated. The VUV photoluminescent intensity of Y2O2S:Eu3+ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a med...     

Bi2S3 nanomaterials: morphology manipulation and related properties

The Bi(2)S(3) nanomaterials with various morphologies such as nanorods, nanowires, nanowire bundles, urchin-like microspheres and urchin-like microspheres with cavities have been successfully synthesized through a simple hydrothermal method. Experimental results indicate that sulfur sources play crucial roles in determining the morphologies of Bi(2)S(3) products. Moreover, formation mechanisms of different Bi(2)S(3) nanostructures are discussed based on understanding of the growth habit of Bi(2)S(3) crystal. Finally, we also studied the morphologies-dependent electrochemical and optical properties of the as-synthesized Bi(2)S(3) nanomaterials.     

SiO_2/PE/Bi_2S_3核壳结构纳米颗粒的合成与性能(英文)

以多层电解质作为微型反应器,制备了SiO2/Polyelectrolyte(PE)/Bi2S3核壳纳米粒子。XRD结果表明Bi2S3颗粒属于正交晶系。由透射电镜和场发射扫描电镜照片可知,在直径为640nm左右的SiO2表面覆盖了厚度35nm的Bi2S3壳层。红外光谱分析结果表明硅烷网络在结构上发生了变化(SiO2表面的硅烷醇键沉积在Bi2S3的表面)。SiO2核和SiO2/PE/Bi2S3的紫外-可见吸收光谱显示在900nm存在典型吸收边。     

离子液体中微波合成纳米结构的Bi2S3和Bi19Br3S27

在不同咪唑基离子液体中, 利用微波辅助法快速合成了不同形貌的Bi2S3纳米粒子和Bi19Br3S27纳米棒. 利用XRD, TEM和SEM对合成产物进行了结构和形貌的表征. 实验结果表明离子液体在合成过程中对产物的相结构和形貌发挥了重要的作用. 实验中还进一步考察了不同实验条件对产物形貌的影响. 对实验的合成机理进行了初步探讨. 对不同形貌和纳米结构的Bi2S3和Bi19Br3S27进行了UV-Vis光谱分析.     

离子交换法制备高光催化活性Bi2WO6@Bi2S3异质结纳米片

社会经济快速发展的同时, 也带来了日益严峻的环境污染问题. 半导体光催化氧化技术因节能环保而在环境领域有广阔的应用前景. 作为最具有代表性的半导体光催化材料, TiO2因为其禁带宽度(3.2 eV)比较大, 只能被紫外光激发, 因而对太阳能的利用率较低. 作为一种最简单的含铋层状氧化物, Bi2WO6的禁带宽度(2.7 eV)相对较小, 可以部分利用太阳光中的可见光, 因而受到广大研究者的青睐. 但是, Bi2WO6光催化材料的可见光响应范围较窄, 仅能被波长小于450 nm的光激发, 且激发后的光生载流子容易复合, 导致光催化效率不高. 因此, 迫切需要对Bi2WO6光催化材料进行结构修饰与改性,采用拓展其光响应范围和抑制载流子复合, 来提高其光催化活性.本文采用离子交换法原位合成了具有核-壳结构的Bi2S3@Bi2WO6纳米片, 充分利用Bi2S3优良的可见光响应性能和半导体异质结光催化剂的构建, 来提高Bi2WO6的光催化活性. 结果表明, 随着Na2S·9H2O用量从0增加到1.5 g, 所得催化剂的光活性不断提高, X3B的降解速率常数由0.40×10-3min-1增加到6.6×10-3min-1, 催化剂活性提高了16.5倍. 当进一步增加Na2S·9H2O的用量时(1.5-3.0 g), 复合催化剂的光活性下降. 这是由于过多Na2S·9H2O的引入导致在催化剂表面生成了没有光活性的NaBiS2层(Bi2S3+ Na2S = 2NaBiS2), 占据了催化剂的活性位点, 阻碍了染料分子与催化剂的直接接触. Bi2WO6@Bi2S3异质结纳米片光活性的提高, 可归因于Bi2S3的敏化作用极大拓展了复合催化剂的光响应范围; 另一方面, Bi2WO6和Bi2S3两者之间的半导体异质结效应有效促进了光生载流子在空间的有效分离, 抑制了光生电子-空穴的复合, 从而提高了复合催化剂的催化效率. 本研究为其他半导体复合材料的原位生长制备提供了新的思路.     

Novel heterostructured Bi(2)S(3)/BiOI photocatalyst: facile preparation, characterization and visible light photocatalytic performance

Novel Bi(2)S(3)/BiOI heterostructures were successfully synthesized through a facile and economical ion exchange method between BiOI and thioacetamide (CH(3)CSNH(2)), and characterized by multiform techniques, such as XRD, Raman, FT-IR, XPS, SEM, TEM, HRTEM, SAED, BET and DRS. The obtained Bi(2)S(3)/BiOI photocatalysts showed excellent photocatalytic performance for decomposing organic dye methyl orange (MO) compared with pure BiOI under visible light irradiation (λ > 420 nm). Among the Bi(2)S(3)/BiOI photocatalysts with different molar percentage of Bi(2)S(3) to initial BiOI (from 2 to 8%), 4% Bi(2)S(3)/BiOI exhibited the highest photocatalytic activity with apparent k(app) of 0.2968 h(-1). Differently, Bi(2)S(3)/BiOI displayed low photocatalytic activity for many colorless organic substrates, such as phenol, 2-chlorophenol, dimethyl phthalate and 5-sulfosalicylic acid. Moreover, the study on the mechanism suggested that the enhanced photocatalytic activity mainly resulted from the role of Bi(2)S(3)-BiOI heterojunctions formed in the Bi(2)S(3)/BiOI, which could lead to efficient separation of photoinduced carriers.     

Microwave-assisted synthesis of sulfide M2S3 (m = Bi, Sb) nanorods using an ionic liquid

Single-crystalline Bi(2)S(3) and Sb(2)S(3) nanorods have been successfully synthesized by the microwave-assisted ionic liquid method. The starting reagents were Bi(2)O(3) or Sb(2)O(3), HCl, Na(2)S(2)O(3), and ethylene glycol (EG) or ethanolamine, and the ionic liquid used was 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]). Our experiments showed that the ionic liquid played an important role in the morphology of M(2)S(3) (M = Bi, Sb). Single-crystalline Bi(2)S(3) nanorods could be prepared in the presence of [BMIM][BF(4)]. However, urchinlike Bi(2)S(3) structures consisting of nanorods were formed without using [BMIM][BF(4)]. Single-crystalline Sb(2)S(3) nanorods were obtained in the presence of [BMIM][BF(4)]. However, single-crystalline Sb(2)S(3) nanosheets could be prepared in the absence of [BMIM][BF(4)]. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and electron diffraction (ED).