Prediction study of structural and elastic properties under pressure effect of M2SnC (M=Ti, Zr, Nb, Hf)

Using first-principles calculations, we have studied the structural and elastic properties of M₂SnC, with M=Ti, Zr, Nb and Hf. Geometrical optimization of the unit cell is in good agreement with the available experimental data. The effect of high pressures, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than those along the c-axis. We have observed a quadratic dependence of the lattice parameters versus the applied pressure. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear dependence of the elastic stiffnesses on the pressure is found. We derived the bulk and shear moduli, Young's moduli and Poisson's ratio for ideal polycrystalline M₂SnC aggregates. We estimated the Debye temperature of M₂SnC from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of Ti₂SnC, Zr₂SnC, Nb₂SnC, and Hf₂SnC compounds.     

Structural, electronic, elastic and thermal properties of Mg2Si

First-principles calculations of the lattice parameter, electron density maps, density of states and elastic constants of Mg₂Si are reported. The lattice parameter is found to differ by less than 0.8% from the experimental data. Calculations of density of states and electron density maps are also performed to describe the orbital mixing and the nature of chemical bonding. Our results indicate that the bonding interactions in the Mg₂Si crystal are more covalent than ionic. The quasi-harmonic Debye model, by means of total energy versus volume calculations obtained with the plane-wave pseudopotential method, is applied to study the elastic, thermal and vibrational effects. The variations of bulk modulus, Grüneisen parameter, Debye temperature, heat capacity C_v, C_p and entropy with pressure P up to 7 GPa in the temperature interval 0-1300 K have been systemically investigated. Significant differences in properties are observed at high pressure and high temperature. When T<1300 K, the calculated entropy and heat capacity agree reasonably with available experimental data. Therefore, the present results indicate that the combination of first-principles and quasi-harmonic Debye model is an efficient approach to simulate the behavior of Mg₂Si.     

Structural,elastic, electronic and thermal properties of M2SbP (M = Ti,Zr and Hf)

The structural, elastic, electronic and thermal properties of M₂SbP (M = Ti, Zr and Hf) were studied by means of a pseudo-potential plane-wave method based on the density functional theory within both the local density approximation and the generalised gradient approximation. The optimised zero-pressure geometrical parameters, i.e. the two unit cell lengths (a, c) and the internal coordinate (z), were in good agreement with available experimental and theoretical data. The effect of high pressure, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than along c-axis. The anisotropic independent elastic constants were calculated using the static finite strain technique. Numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature for ideal polycrystalline M₂SbP aggregates were performed in the framework of the Voigt–Reuss–Hill approximation. The calculated band structures show that all studied materials are electrical conductors. Analysis of the atomic site projected densities showed that the bonding is of covalent–ionic nature with the presence of metallic character. The density of states at the Fermi level is dictated by the transition metal d–d bands; the Sb element has little effect. Thermal effects on some macroscopic properties of M₂SbP were predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the volume expansion coefficient, heat capacity and Debye temperature with pressure and temperature in the ranges 0–50 GPa and 0–2000 K were obtained successfully.     

The structural, elastic and thermodynamic properties of thorium tetraboride

The structural, elastic and thermodynamic properties of thorium tetraboride (ThB₄) have been investigated by using first-principles plane-wave pseudopotential density functional theory with generalized gradient approximation. The behaviors of structural parameters under 0-70 GPa hydrostatic pressure are studied by means of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) geometry optimization scheme. By using the stress-strain method, single crystal elastic constants are calculated to test the mechanical stability of the crystal structure and to determine mechanical properties such as bulk modulus at each pressure. However, in order to study the thermodynamic properties of ThB₄, the quasi-harmonic Debye model is used. Then, the dependencies of bulk modulus, heat capacities, thermal expansions, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range 0-70 GPa and temperature range 0-1500 K.     

Structural, high pressure and elastic properties of transition metal monocarbides: A FP-LAPW study

The structural, elastic and thermal properties of four transition metal monocarbides ScC, YC (group III), VC and NbC (group V) have been investigated using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) both at ambient and high pressure. We predict a B₁ to B₂ structural phase transition at 127.8 and 80.4 GPa for ScC and YC along with the volume collapse percentage of 7.6 and 8.4%, respectively. No phase transition is observed in case of VC and NbC up to pressure 400 and 360 GPa, respectively. The ground state properties such as equilibrium lattice constant (a₀), bulk modulus (B) and its pressure derivative (B′) are determined and compared with available data. We have computed the elastic moduli and Debye temperature and report their variation as a function of pressure.     

Elastic,mechanical, electronic properties and hardness of Nb2AsC from first principles

The study aims at the elastic, mechanical, electronic properties and hardness of Nb₂AsC using first principles based on the density functional theory method within the generalised gradient approximation. The calculated lattice parameters of Nb₂AsC are in good agreement with the experimental data. The five independent elastic constants are firstly calculated as a function of pressure, and our results indicate that it is mechanically stable in the applied pressure. The elastic anisotropy is examined through the computation of the direction dependence of Young's modulus. The pressure dependences of the bulk modulus, shear modulus, average velocity of acoustic waves and Debye temperature of Nb₂AsC are systematically investigated. The band structure and density of states are discussed, and the results show that the strong hybridisations C p–Nb d and As p–Nb d would be beneficial to the structure stability of Nb₂AsC. Based on the Mulliken population analysis, the hardness of Nb₂AsC is predicted.     

First-principles calculations of structural, elastic, electronic and optical properties of the antiperovskite AsNMg3

The density functional theory (DFT) calculations of structural, elastic, electronic and optical properties of the cubic antiperovskite AsNMg₃ has been reported using the pseudo-potential plane wave method (PP-PW) within the generalized gradient approximation (GGA). The equilibrium lattice, bulk modulus and its pressure derivative have been determined. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline AsNMg₃ aggregate. We estimated the Debye temperature of AsNMg₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of AsNMg₃ compound, and it still awaits experimental confirmation. Band structure, density of states and pressure coefficients of energy gaps are also given. The fundamental band gap (Γ-Γ) initially increases up to 4 GPa and then decreases as a function of pressure. Furthermore, the dielectric function, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. The all results are compared with the available theoretical and experimental data.     

First principles study on the structural, electronic, and elastic properties of Na-As systems

We have performed the first principles calculation by using the plane-wave pseudopotential approach with the generalized gradient approximation for investigating the structural, electronic, and elastic properties Na-As systems (NaAs in NaP, LiAs and AuCu-type structures, NaAs₂ in MgCu₂-type structure, Na₃As in Na₃As, Cu₃P and Li₃Bi-type structures, and Na₅As₄ in A₅B₄-type structure). The lattice parameters, cohesive energy, formation energy, bulk modulus, and the first derivative of bulk modulus (to fit to Murnaghan’s equation of state) of the related structures are calculated. The second-order elastic constants and the other related quantities such as Young’s modulus, shear modulus, Poisson’s ratio, sound velocities, and Debye temperature are also estimated.     

Pressure effect on the structural and elastic property of Hf2InC

Using plane-wave pseudopotential (PW-PP) method based on the density functional theory (DFT) within the Local Density Approximation (LDA), we have performed a study of the structural and elastic properties of selected Hf₂InC compound belonging to the so-called MAX phases. The calculated equilibrium lattice parameters are in accordance with the experimental results. The result of high pressures on the lattice parameter shows that the contractions along the c-axis were more than along the a-axis. In order to gain further information on the mechanical properties, we have also calculated the anisotropy factor, Poison's ratio, Young's modulus, sound velocities and Debye temperature for Hf₂InC.     

First-principles study of the structural and thermodynamic properties of AsNMg3 antiperovskite

The structural and elastic properties of the antiperovskite semiconductor AsNMg₃ are investigated using the full-potential linearized augmented plane wave plus local orbital (FP-LAPW+lo) method within the generalized gradient in the frame of the density functional theory. The ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus and elastic constants are in good agreement with numerous experimental and theoretical data. Through the quasi-harmonic Debye model, in which the phononic effects are considered, we have obtained successfully the thermodynamic properties such as the thermal expansion coefficient, Debye temperature and specific heats in the whole pressure range from 0 to 30 GPa and temperature range from 0 to 1200 K.     

The first principles study on the Boron antimony compound

We present the results of our calculations on Boron antimony (BSb) compound in zinc-blende (ZB) and rock-salt (RS) structures by performing ab initio calculations within the local density approximation (LDA). Some basic physical properties, such as lattice constant, bulk modulus, cohesive energy, phase transition pressure, second-order elastic constants (C_ij), phonon frequencies, and some band structural parameters are calculated and compared with those obtained with other recent theoretical works. In order to further understand the behaviour of BSb compound, we have also predicted, the pressure-dependent behaviours of the band gap, second-order elastic constants (C_ij), Young's modulus, poison ratios (ν), Anizotropy factor (A), sound velocities, and Debye temperature for this hypothetical compound.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

Elasticity and thermodynamic properties of RuB2 under pressure

First-principles calculations of the crystal structure and the elastic properties of RuB₂ have been carried out with the plane-wave pseudopotential density functional theory method. The calculated values are in very good agreement with experimental data as well as with some of the existing model calculations. The elastic constants c_ij, the aggregate elastic moduli (B, G, E), Poisson's ratio, and the elastic anisotropy with pressure have been investigated. Through the quasi-harmonic Debye model considering the phonon effects, the isothermal bulk modulus, the thermal expansions, Grüneisen parameters, and Debye temperatures depending on the temperature and pressure are obtained in the whole pressure range from 0 to 60 GPa and temperature range from 0 to 1100 K as well as compared to available data.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

Ab initio predicted elastic and thermodynamic properties of Imm2-BN under high pressure

The structural parameters, elastic constants, thermodynamic properties of Imm2-BN under high pressure were calculated via the density functional theory in combination with quasi-harmonic Debye approach. The results showed that the pressure has the significant effect on the equilibrium lattice parameters, elastic and thermodynamic properties of Imm2-BN. The obtained ground state structural parameters are in good agreement with previous theoretical results. The elastic constants, elastic modulus, and elastic anisotropy were determined in the pressure range of 0–90?GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is evaluated and the elastic anisotropy of the Imm2-BN up to 90?GPa is studied in detail. Moreover, the pressure and temperature dependence of thermal expansion coefficient, heat capacity, Debye temperature, and Grüneisen parameter are predicted in a wide pressure (0–90?GPa) and temperature (0–1600?K) ranges. The obtained results are expected to provide helpful guidance for the future synthesis and application of Imm2-BN.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

The elastic behavior of dense C3N4 under high pressure: First-principles calculations

We have carried a detailed theoretical study on the geometry, density of states, elastic properties, sound velocities and Debye temperature of α-, β-, c- and p-C₃N₄ compounds under a maximum of pressure up to 100 GPa by using first principles calculations. The optimized lattice constants under zero pressure and zero temperature agreed well with the previous experimental and theoretical results. The band gaps of the four types of dense C₃N₄ were widened gradually with the increase of pressure. The calculated Poisson’s ratio γ and B/G values suggest α-, c- and p-C₃N₄ are brittle materials under 0–100 GPa, whereas β-C₃N₄ will become a ductile material as external pressure reaches 57 GPa. We found that the Debye temperature of the four dense C₃N₄ gradually reduces in the order of c-C₃N₄>p-C₃N₄>α-C₃N₄>β-C₃N₄ at 0 GPa and 0 K. However, the Debye temperature of c-C₃N₄ was lower than p-C₃N₄ when external pressure exceeds 6.3 GPa. It may hint that the results could be served as a valuable prediction for further experiments.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.     

A theoretical study of structural, elastic and thermal properties of heavy lanthanide monoantimonides

The structural, elastic and thermal properties of three heavy monoantimonides of holmium, erbium and thulium (LnSb, Ln=Ho, Er and Tm) have been investigated theoretically by using an interionic potential theory consisting of long-range Coulomb, short-range repulsive and van der Waal’s (vdW) interactions. These compounds exhibit first-order crystallographic phase transition from their initial NaCl-type structure to CsCl-type structure at pressures 27, 33.2 and 29.8 GPa for HoSb, ErSb and TmSb, respectively. The values of elastic constants and Debye temperatures as a function of pressure are also reported. The elastic properties such as Young modulus (E), Shear modulus (G), Poisson ratio (υ) and anisotropic ratio (A) in an NaCl-type structure are also predicted.     

Full potential calculation of structural, elastic properties and high-pressure phase of binary noble metal carbide: ruthenium carbide

We present in this paper the results of an ab initio theoretical study within the local density approximation (LDA) to determine in rock-salt (B1), cesium chloride (B2), zinc-blende (B3), and tungsten carbide (WC) type structures, the structural, elastic constants, hardness properties and high-pressure phase of the noble metal carbide of ruthenium carbide (RuC).The ground state properties such as the equilibrium lattice constant, elastic constant, the bulk modulus, its pressure derivative, and the hardness in the four phases are determined and compared with available theoretical data. Only for the three phases B1, B3, and WC, is the RuC mechanically stable, while in the B2 phase it is unstable, but in B3 RuC is the most energetically favourable phase with the bulk modulus 263 GPa, and at sufficiently high pressure (P_t=19.2 GPa) the tungsten carbide (WC) structure would be favoured, where ReC-WC is meta-stable.The highest bulk modulus values in the B3, B2, and WC structures and the hardnesses of H(B3)=36.94 GPa, H(B1)=25.21 GPa, and H(WC)=25.30 GPa indicate that the RuC compound is a superhard material in B3, and is not superhard in B1 and WC structures compared with the H(diamond)=96 GPa.