Magnetically assisted gas-solid fluidization in a tapered vessel:Part II Dimensionless bed expansion scaling

The article presents an effort to create dimensionless scaling correlations of the overall bed porosity in the case of magnetically assisted fluidization in a tapered vessel with external transverse magnetic field. This is a stand of portion of new branch in the magnetically assisted fluidization recently created concerning employment of tapered vessels. Dimensional analysis based on "pressure transform" of the initial set of variables and involving the magnetic granular Bond number has been applied to deve...     

Magnetically modified microbial cells： A new type of magnetic adsorbents

Microbial cells, either in free or immobilized form, can be used for the preconcentration or removal of metal ions, organic and inorganic xenobiotics or biologically active compounds. Magnetic modification of these cells enables to prepare magnetic adsorbents that can be easily manipulated in difficult-to-handle samples, such as suspensions, in the presence of external magnetic field. In this review, typical examples of magnetic modifications of microbial cells are presented, as well as their possible applications for the separation of organic xenobiotics and heavy metal ions.     

Sedimentation acceleration of remanent iron oxide by magnetic flocculation

Sedimentation based processes are widely used in industry to separate particles from a liquid phase. Since the advent of the ＂Nanoworld＂ the demand for effective separation technologies has rapidly risen, calling for the development of new separation concepts, one of which lies in hybrid separation using the superposition of a magnetic field for magnetic particles. Possible product portfolio of such separation consists of pigment production, nanomagnetics production for electronics and bio separation, A promising step in that direction is magnetic field enhanced cake filtration, which has by now progressed from batch to continuous ooeration. In sedimentation processes in a mass force field the settling behaviour of particles strongly depends on physico-chemical properties, concentration and size distribution of the particles. By adjusting the pH, the interparticle forces, in particular the electrostatic repulsion, can be manipulated. For remanent magnetic particles such as magnetite, pre-treatment in a magnetic field could lead to a change of interparticle interactions. By magnetizing the particles apart from van der Waals attraction and electrostatic repulsion, an additional potential is induced, the magnetic attraction, which could easily dominate the other potentials and result in agglomeration in the primary minimum. By sedimentation analysis, a wide spectrum of parameters like pH, magnetic field strength and concentration have been investigated. The results show a strong increase of sedimentation velocity by magnetic flocculation of the raw suspension. This leads to a rise in throughput due to the acceleration of sedimentation kinetics by imparting a non-chemical interaction to the physico-chemical properties in the feed stream of the separation apparatus.     

Ferrimagnetic ceramic adsorbents for cleanup of H2S from exhaust gases

Adsorbents that exhibit magnetic properties in addition to other required process-relevant characteristics open up new perspectives for the dry reduction and/or elimination of HES and other sulfur compounds from exhaust gases. These adsorbents eliminate the sulfur compounds from exhaust gases by virtue of their coatings and their magnetic property which makes it possible the use of magnetically assisted and stabilized fluidization in an externally applied magnetic field. In the present paper, the feasibility of the sorptive function of porous ceramic ferrimagnetic beads is ensured by sol-gel coating of zinc oxide without the formation of Zn-Fe-oxides and without considerable decrease of available pore volume. The results of material characterization by SEM, Auger electron spectroscopy, X-ray and mercury-porosity measurements and the loading capacity of a HES/N2 model gas are presented and discussed. The resulting HES loading of the functionalized adsorbent beads is more than 10 times larger than that of the starting material. @ 2007 Chinese Society of Particuolo~v and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V.     

Magnetic nanoparticles and concentrated magnetic nanofluids： Synthesis, properties and some applications

This paper reviews some recent results concerning chemical synthesis of magnetic nanoparticles and preparation of various types of magnetic nanofluids. Structural properties and behaviour in external magnetic field of magnetic nanofluids will be emphasized with relation to their use in leakage-free rotating seals and in biomedical applications.     

Magnetically assisted gas-solid fluidization in a tapered vessel: Part Ⅱ Dimensionless bed expansion scaling

The article presents an effort to create dimensionless scaling correlations of the overall bed porosity in the case of magnetically assisted fluidization in a tapered vessel with external transverse magnetic field. This is a stand of portion of new branch in the magnetically assisted fluidization recently created con-cerning employment of tapered vessels. Dimensional analysis based on "pressure transform" of the initial set of variables and involving the magnetic granular Bond number has been applied to develop scaling relationships of dimensionless groups representing ratios of pressures created by the fluid flow, gravity and the magnetic field over an elementary volume of the fluidized bed. Special attention has been paid on the existing data correlations developed for non-magnetic beds and the links to the new ones especially developed for tapered magnetic counterparts. A special dimensionless variable Xp = (Ar△DbL)1/3(√RgMQ) combining Archimedes and Rosensweig numbers has been conceived for porosity correlation. Data cor-relations have been performed by power-law, exponential decay and asymptotic functions with analysis of their adequacies and accuracies of approximation.     

Magnetic field assisted fluidization Dimensional analysis addressing the physical basis

This paper originates a discussion on dimensional analysis and scaling in magnetically assisted fluidized beds. Basic examination of process variables, merging mechanical and magnetic units, allows the conversion of mixed sets of variables into unified terms representing surface forces as effects of the fields contributing to the assisted fluidization behaviour. This transformation is termed ＂pressure transform＂ since the new variables are all characteristic pressures generated by three basic fields： gravity, magnetic and fluid flow. This approach addresses the physical basis in terms of dimensionless groups rather than formal algebraic manipulations pertinent to classical dimensional analysis. Basic dimensionless group termed granular magnetic Bond number is introduced as the ratio of characteristic pressures of gravity and of magnetic field. This analysis also provides a set of named dimensionless numbers characterizing magnetic field assisted fluidization such as Filippov number, Rosensweig number, Kwauk number and Siegell number, derived as ratios of characteristic pressures.     

Multi-scale magnetic resonance measurements and validation of Discrete Element Model simulations

This short review describes the capabilities of magnetic resonance (MR) to image opaque single- and two-phase granular systems, such as rotating cylinders and gas-fluidized beds operated in different fluidization regimes. The unique capability of MR to not only image the solids’ distribution (voidage) but also the velocity of the particulate phase is clearly shown. It is demonstrated that MR can provide measurements over different length and time scales. With the MR equipment used for the studies summarized here, temporal and spatial scales range from sub-millisecond to hours and from a few hundred micrometres to a few centimetres, respectively. Besides providing crucial data required for an improved understanding of the underlying physics of granular flows, multi-scale MR measurements were also used to validate numerical simulations of granular systems. It is shown that predictions of time-averaged properties, such as voidage and velocity of the particulate phase, made using the Discrete Element Model agree very well with MR measurements.     

Experimental investigation on heat transfer characteristics of magnetic fluid flow around a fine wire under the influence of an external magnetic field

Experimental investigation is conducted to get insight into convective heat transfer features of the aqueous magnetic fluid flow over a fine wire under the influence of an external magnetic field. The convective heat transfer coefficient of the aqueous magnetic fluid flow around the heated wire is measured in both the uniform magnetic field and the magnetic field gradient. The effects of the external magnetic field strength and its orientation on the thermal behaviors of the magnetic fluids are analyzed. The experimental results show that the external magnetic field is a vital factor that affects the convective heat transfer performances of the magnetic fluids and the control of heat transfer processes of a magnetic fluid flow can be possible by applying an external magnetic field.     

Removal of dust from flue gas in magnetically stabilized fluidized bed

A magnetically stabilized fluidized bed (MSFB, φ 500mm x 2100mm) was designed to study dust removal from flue gas. Based on the mechanism of dust removal in a fixed bed, the effects on collection efficiency of magnetic field intensity, ratio of flue gas velocity to minimum fluidization velocity, bed height, and particle average diameter, were investigated. Then feasible methods for MSFB to better remove dust were proposed. Over 95% of dust removal with MSFB can be achieved, when stable fluidization is maintained and when magnetic particles are frequently renewed.     

A feasible neuron for estimating the magnetic field effect

Biological neurons are capable of encoding a variety of stimuli, and the synaptic plasticity can be enhanced for activating appropriate firing modes in the neural activities. Artificial neural circuits are effective to reproduce the main biophysical properties of neurons when the nonlinear circuits composed of reliable electronic components with distinct physical properties are tamed to generate similar firing patterns as biological neurons. In this paper, a simple neural circuit is proposed to estimate the effect of magnetic field on the neural activities by incorporating two physical electronic components. A magnetic flux-controlled memristor and an ideal Josephson junction in parallel connection are used to percept the induction currents induced by the magnetic field. The circuit equations are obtained according to the Kirchhoff’s theorem and an equivalent neuron model is acquired by applying scale transformation on the physical variables and parameters in the neural circuit. Standard bifurcation analysis is calculated to predict possible mode transition and evolution of firing patterns. The Hamilton energy is also obtained to find its dependence on the mode selection in electronic activities. Furthermore, External magnetic field is applied to estimate the mode transition of neural activities because the phase error and the junction current across the Josephson junction can be adjusted to change the dynamics of the neural circuit. It is found that the biophysical functional neuron can present rapid and sensitive response to external magnetic field. Nonlinear resonance is obtained when stochastic phase error is induced by external time-varying magnetic field. The neural circuit can be suitable for further calculating the collective behaviors of neurons exposed to magnetic field.

     

磁敏弹性膜的研制、性能表征及应用研究进展

磁敏弹性膜是一种新型的智能材料,其力学、电学、磁学、声学等性质能够受外加磁场的控制,从而在多个领域展现在广泛的应用前景。本文首先从材料设计、制备工艺、结构设计等方面综述了磁敏弹性膜的研制方法,随后详细阐述了磁敏弹性膜的力学、电磁、声学等性能表征及内部机理,最后介绍了磁敏弹性膜在传感器、执行器、柔性机器人等领域的应用,在上述基础上,展望了磁敏弹性膜的发展,也提出了面临的问题及挑战。     

Interaction forces between soft magnetic particles in uniform and non-uniform magnetic fields

The influence of the magnetization of a soft magnetic sphere on the surrounding magnetic field is measured and characterized.The interaction force between two soft magnetic particles is directly measured using an ultra precision load sensor in uniform and non-uniform magnetic fields. The interaction force largely follows an inverse fourth power law as a function of separation distance between particle centers. At small distances,the effect of magnetization of one particle on the magnetization of its adjacent particle causes the attractive（repulsive） force to be larger（smaller） than that predicted by the inverse fourth power law.The theoretical prediction based on a modified dipole model,that takes into account the coupling effect of the magnetization among soft magnetic particles,gives excellent agreement with the measured force in a uniform magnetic field.The interaction force under a non-uniform applied magnetic field can be reasonably predicted using the dipole-dipole interaction model when the local magnetic field is used to determine the magnetization.     

Removal of dust from flue gas in magnetically stabilized fluidized bed

A magnetically stabilized fluidized bed （MSFB,Ф 500mm×2100mm） was designed to study dust removal from flue gas. Based on the mechanism of dust removal in a fixed bed, the effects on collection efficiency of magnetic field intensity, ratio of flue gas velocity to minimum fluidization velocity, bed height, and particle average diameter, were investigated. Then feasible methods for MSFB to better remove dust were proposed. Over 95 % of dust removal with MSFB can be achieved, when stable fluidization is maintained and when magnetic particles are frequently renewed.     

Microstructural transition in an ordered set of magnetic spheres immersed in a carrier liquid

This work explores the physics of an ordered set of interacting spheres immersed in a carrier liquid. We present numerical simulations that compute the translational and rotational motion of N interacting spheres based on classical principles of Stokesian dynamics. The spheres are assumed to be made of a magnetizable material, subjected to magnetic and hydrodynamic long range interactions. We explore structure transition using a Lagragian approach of a continuum volume of fluid containing micrometric magnetic particles. We present local maps of particle volume fraction within the calculation Lattice. In this condition, considering the presence and absence of an applied magnetic field, instantaneous snapshots of the local microstructure are taken. Thus, different possibilities of long range interactions are considered. We also complement these results with meaningful statistics of time series obtained through our simulations, such as the correlation time of velocity fluctuations and their self-correlation functions. The data analyzed in the present work sustain the fact that initially ordered neutrally buoyant suspensions have an anisotropic memory-like behavior in the direction of an applied field. It is also observed that particles tend to form small isotropic clusters in the absence of an external field. However, hydrodynamic interactions tend to disperse the particulate phase, avoiding the formation of clusters. This finding suggests that hydrodynamic interactions may play a relevant role on the magnetization dynamics of ferrofluids.     

Behavior of mixed ZnO and SiO2 nano-particles in magnetic field assisted fluidization

The fluidization behavior of ZnO nano-particles in magnetic fluidized bed （MFB） by adding coarse magnetic particles was investigated, followed by the co-fluidization of mixtures of ZnO and SiO2 nano-particles. For such co-fluidization, bed expansion was found to change smoothly with gas velocity through a range of stable operation. By measuring the bed expansion ratio and pressure drop, a stability diagram for the mixture in MFB was obtained. Within this stable operation range, with increasing gas velocity the pressure drop hardly changes as the bed expands, up to an expansion ratio of more than 4.     

Hysteresis in magnetic shape memory composites: Modeling and simulation

Magnetic shape memory alloys are characterized by the coupling between the reorientation of structural variants and the rearrangement of magnetic domains. This permits to control the shape change via an external magnetic field, at least in single crystals. Composite materials with single-crystalline particles embedded in a softer matrix have been proposed as a way to overcome the blocking of the reorientation at grain boundaries.We investigate hysteresis phenomena for small NiMnGa single crystals embedded in a polymer matrix for slowly varying magnetic fields. The evolution of the microstructure is studied within the rate-independent variational framework proposed by Mielke and Theil (1999). The underlying variational model incorporates linearized elasticity, micromagnetism, stray field and a dissipation term proportional to the volume swept by the twin boundary. The time discretization is based on an incremental minimization of the sum of energy and dissipation. A backtracking approach is employed to approximately ensure the global minimality condition.We illustrate and discuss the influence of the particle geometry (volume fraction, shape, arrangement) and the polymer elastic parameters on the observed hysteresis and compare with recent experimental results.     

Convection of a ferrofluid in an alternating magnetic field

Parametric convective instability of a horizontal layer of a homogeneous ferrofluid under the action of an alternating magnetic field is studied. A case with rigid boundaries is considered. Convection thresholds are found. In an alternating magnetic field with a zero mean value, perturbations are found to have a synchronous character. These perturbations, however, can belong to different classes, because they depend on the temperature difference on the layer boundaries, the layer thickness, the frequency and amplitude of the alternating external field, and the physical properties of the ferrofluid. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 4, pp. 18–27, July–August, 2009.     

Numerical simulation on magnetic confinement characteristics of internal vortex electrostatic cyclone precipitator under different working voltages

Aiming at improving the capture performance of internal vortex electrostatic cyclone precipitator (ECP), a theoretical model with mechanics-electric-magnetic coupling was established, the collection efficiency of magnetic confinement ECP under different working voltages was simulated, and the influence of magnetic flux intensity on the removal performance of submicron particles was explored. Results show that the number of particles escaped from the cyclone is greatly reduced after the introduction of magnetic field and electric field, indicating that charging effect and magnetic confinement are more conductive to trap submicron particles in the internal vortex ECP. The lower the working voltage is, the worse the charging lifting effect is, but the stronger the magnetic confinement characteristics are. Furthermore, the contributions of charging effect to collection efficiency and magnetic confinement characteristics are more obvious at a weaker magnetic flux density. The research results can provide a practical new idea for the innovative design of ECP.     

Analysis of relationships between residual magnetic field and residual stress

The impact of stress on changes in magnetisation is one of the most complex issues of magnetism. Magnetic methods make use of the impact of stress on permeability, hysteresis and magnetic Barkhausen noise, which are examined with fields with a high strength and a small frequency. The paper presents an analysis of the impact of residual stress resulting from inhomogeneous plastic deformations in the notch area of the examined samples on the changes in the strength of the residual magnetic field (RMF). The RMF on the surface of the component is the superposition of the simultaneous effect of the shape, the anisotropic magnetic properties of the material, as well as of the values of the components of a weak external magnetic field (most commonly—the magnetic field of the Earth). Distributions of the RMF components were measured on the surface of samples with a various degree of plastic strain. The finite element method was used to model residual stress in the samples. The impact of residual stress on changes in the residual magnetic field was shown. A qualitative correlation was found between places with residual stress and areas with increased values of the gradients of the RMF components. Further research is now in progress in order to develop the quantitative relationships.