电化学和紫外-可见吸收光谱法研究pH和金纳米粒子对细胞色素c的影响

制备了粒径均匀、平均粒子尺度为(4.7±0.6)nm,表面修饰3-巯基丙酸(MPA)的金纳米粒子(AuNPs).利用电化学和紫外-可见(UV-Vis)吸收光谱研究了pH和AuNPs对细胞色素c(Cytc)结构的影响.UV-Vis吸收光谱结果表明,pH为7.5-3.0时,Cytc和Cytc-AuNPs复合物的结构没有发生明显变化.当pH=2.0时,Cytc和Cytc-AuNPs复合物的Soret谱峰位置均发生明显移动,说明pH诱导其构象发生变化.循环伏安(CV)结果表明,表面修饰了MPA的AuNPs能促进Cytc和电极之间的电子传输,与修饰了柠檬酸根的AuNPs相比,其生物兼容性更好.pH的变化会引起CV中Cytc峰电流的改变和峰电位的移动.随着pH值的降低,Cytc电活性的量逐渐减小,并且pH诱导Cytc发生不可逆变性.AuNPs的引入使自由态的Cytc耐酸性增强,而使得吸附态的Cytc耐酸能力减弱.     

金纳米粒子比色测定细胞色素c构象变化

金纳米粒子(AuNPs)的颜色会随着细胞色素c(Cytc)构象变化而发生较大的变化,作者在改变原测定流程的基础上利用这种有规律的变化研究和测定了H+和L-半胱氨酸(L-Cys)对Cytc的构象变化.实验中分别加入pH=1-13的Cytc,可以使AuNPs显示青、蓝、紫、红等明显不同的颜色,从而可以利用AuNPs比色快速测定不同pH值的Cytc构象变化.在pH=7时,当附加L-Cys浓度从低浓度变化到高浓度时,AuNPs颜色逐渐从紫色变化到蓝色、青色,从而实现利用AuNPs比色测定由L-Cys所引起Cytc构象变化.圆二色(CD)光谱证实了pH=1-13和不同浓度L-Cys下的Cytc构象变化.借助紫外-可见吸收光谱和扫描电子显微镜(SEM)进一步明确了加入Cytc后AuNPs的不同聚集状态与其颜色变化的关系.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

纳米金三明治结构调制细胞色素c电子传递特性的分子机理研究

以细胞色素c(Cyt c)为模型蛋白,采用表面增强红外吸收光谱监测了三明治结构所吸附的纳米金对氧化还原诱导的Cyt c表面增强红外差谱的改变.研究表明,在单层Cyt c分子表面组装纳米金,使得血红素的红外差谱特征峰明显增强,这归因于纳米金和血红素之间的电子传递.纳米金与Cyt c氧化还原活性中心血红素的相互作用加速了蛋白质的电子传递.这为实现并优化表面吸附蛋白质的直接电化学提供了一种新技术.     

Carboranethiol-modified gold surfaces. A study and comparison of modified cluster and flat surfaces

Four different carboranethiol derivatives were used to modify the surfaces of gold nanoparticles and flat gold films. The novel materials engendered from these modifications are extraordinarily stable species with surfaces that support self-assembled monolayers of 1-(HS)-1,2-C2B10H11, 1,2-(HS)2-1,2-C2B10H10, 1,12-(HS)2-1,12-C2B10H10, and 9,12-(HS)2-1,2-C2B10H10, respectively. Surprisingly, characterization of these materials revealed that a number of molecules of the carboranethiol derivatives are incorporated inside the nanoparticles. This structural feature was studied using a number of techniques, including X-ray photoelectron spectroscopy (XPS), UV-vis, and IR spectroscopies. Thermal desorption experiments show that carborane molecules detach and leave the nanoparticle surface mostly as 1,2-C2B10H10 isotopic clusters, leaving sulfur atoms bound to the gold surface. The surfaces of both the gold nanoparticles and the flat gold films are densely packed with carboranethiolate units. One carborane cluster molecule occupies an area of six to seven surface gold atoms of the nanoparticle and eight surface gold atoms of the flat film. XPS data showed that molecules of 1,12-(HS)2-1,12-C2B10H10 bind to the flat gold surface with only half of the thiol groups due to the steric demands of the icosahedral carborane skeleton. Electrochemical measurements indicate complete coverage of the modified gold surfaces with the carboranethiol molecules.     

Folding control and unfolding free energy of yeast iso-1-cytochrome c bound to layered zirconium phosphate materials monitored by surface plasmon resonance

The free energy change (Delta G degrees ) for the unfolding of immobilized yeast iso-1-cytochrome c (Cyt c) at nanoassemblies was measured by surface plasmon resonance (SPR) spectroscopy. Data show that SPR is sensitive to protein conformational changes, and protein solid interface exerts a major influence on bound protein stability. First, Cyt c was self-assembled on the Au film via the single thiol of Cys-102. Then, crystalline sheets of layered alpha-Zr(O(3)POH)(2).H(2)O (alpha-ZrP) or Zr(O(3)PCH(2)CH(2)COOH)(2).xH(2)O (alpha-ZrCEP) were adsorbed to construct alpha-ZrP/Cyt c/Au or alpha-ZrCEP/Cyt c/Au nanoassemblies. The construction of each layer was monitored by SPR, in real time, and the assemblies were further characterized by atomic force microscopy and electrochemical studies. Thermodynamic stability of the protein nanoassembly was assessed by urea-induced unfolding. Surprisingly, unfolding is reversible in all cases studied here. Stability of Cyt c in alpha-ZrP/Cyt c/Au increased by approximately 4.3 kJ/mol when compared to the unfolding free energy of Cyt c/Au assembly. In contrast, the protein stability decreased by approximately 1.5 kJ/mol for alpha-ZrCEP/Cyt c/Au layer. Thus, OH-decorated surfaces stabilized the protein whereas COOH-decorated surfaces destabilized it. These data quantitate the role of specific functional groups of the inorganic layers in controlling bound protein stability.     

Interaction of azide ion with hemin and cytochrome c immobilized on Au and Ag nanoparticles

This paper presents a set of investigations on the binding of a metabolic inhibitor, azide with prosthetic heme group of biomolecules, hemin chloride (Hem) and cytochrome c (Cyt c) immobilized on Au and Ag nanoparticles. A variety of spectroscopic tools have been used to understand the chemistry occurring on the nanoparticle surface. While the nature of binding of the model system, hemin has been investigated by UV-visible, fluorescence, FTIR, and Raman spectroscopies, the azide binding has been studied in detail by MALDI-TOF MS. Hemin binding on the nanoparticle surface occurs through the carboxylic acid groups. The hemin-N(3) adduct on the nanoparticle surface has been detected by mass spectrometry and its fragments have been studied by post source decay analysis. The chemistry of hemin on the nanoparticle surface has been compared with that of the protein, Cyt c. Azide binding of Cyt c requires thermal activation due to reduced accessibility of the heme center, unlike in the case of hemin. The binding chemistry is similar for free Cyt c and Cyt c bound to the nanoparticles.     

Structural and redox properties of mitochondrial cytochrome c co-sorbed with phosphate on hematite (alpha-Fe2O3) surfaces

The interaction of metalloproteins with oxides has implications not only for bioanalytical systems and biosensors but also in the areas of biomimetic photovoltaic devices, bioremediation, and bacterial metal reduction. Here, we investigate mitochondrial ferricytochrome c (Cyt c) co-sorption with 0.01 and 0.1 M phosphate on hematite (alpha-Fe2O3) surfaces as a function of pH (2-11). Although Cyt c sorption to hematite in the presence of phosphate is consistent with electrostatic attraction, other forces act upon Cyt c as well. The occurrence of multilayer adsorption, and our AFM observations, suggest that Cyt c aggregates as the pH approaches the Cyt c isoelectric point. In solution, methionine coordination of heme Fe occurs only between pH 3 and 7, but in the presence of phosphate this coordination is retained up to pH 10. Electrochemical evidence for the presence of native Cyt c occurs down to pH 3 and up to pH 10 in the absence of phosphate, and this range is extended to pH 2 and 11 in the presence of phosphate. Cyt c that initially adsorbs to a hematite surface may undergo conformation change and coat the surface with unfolded protein such that subsequently adsorbing protein is more likely to retain the native conformational state. AFM provides evidence for rapid sorption kinetics for Cyt c co-sorbed with 0.01 or 0.1 M phosphate. Cyt c co-sorbed with 0.01 M phosphate appears to unfold on the surface of hematite while Cyt c co-sorbed with 0.1 M phosphate possibly retains native conformation due to aggregation.     

Redox‐State‐Mediated Regulation of Cytochrome c Release in Apoptosis Revealed by Surface‐Enhanced Raman Scattering on Nickel Substrates

The interaction of cytochrome c (Cyt c) with cardiolipin (CL) is believed to play an important role in the initial events of apoptosis. Herein, we investigate the structural changes of CL‐bound Fe²⁺Cyt c and the correlation with Cyt c release through surface‐enhanced Raman spectroscopy (SERS) on nickel substrates. The SERS results together with molecular dynamics simulation reveal that Fe²⁺Cyt c undergoes autoxidation and a relatively larger conformational alteration after binding with CL, inducing higher peroxidase activity of Cyt c and higher permeability of the CL membrane compared with those induced by the Fe³⁺Cyt c. The proapoptotic activity and SERS effect of the Ni nanostructures allow the in situ study of the redox‐state‐dependent Cyt c release from isolated mitochondria, which reveals for the first time that the ferrous state of Cyt c most likely plays a more important role in triggering apoptosis.     

细胞色素c在纳米杂化膜修饰玻碳电极上的直接电化学

以多壁碳纳米管(MWNTs)修饰玻碳(GC)电极为基底,自组装金纳米粒子(AuNPs)及L-半胱氨酸(L-Cys)研制杂化膜修饰电极(L-Cys/AuNPs/MWNTs/GC).实验表明,该膜修饰电极在pH=7.0的KH2PO4-K2HPO4缓冲溶液中对细胞色素c(Cyt c)的直接电子转移反应具有良好的电催化作用,C...     

Direct Electrochemistry of Cytochrome c Based on Poly(diallyldimethylammonium Chloride)‐ Graphene Nanosheets/Gold Nanoparticles Hybrid Nanocomposites and Its Biosensing

A novel biosensor was developed by entrapping cytochrome c (Cyt c) in thin films of the room temperature ionic liquid (RTIL) containing nanocomposites of poly(diallyldimethylammonium chloride)‐graphene nanosheets‐gold nanoparticles (PDDA‐Gp‐AuNPs) at a 11‐mercaptoundecanoic acid‐6‐mercapto‐1‐hexanol modified gold electrode. The synthesized PDDA‐Gp‐AuNPs hybrid nanocomposites were characterized by UV‐vis spectroscopy, Raman spectroscopy, scanning electron microscopy and atomic force microscopy. The PDDA‐Gp‐AuNPs nanocomposites could increase the effective surface of the electrode, enhance the fixed amount of Cyt c on the electrode surface, promote the electron transfer and facilitate the catalytic activity of Cyt c. The RTIL could provide a biocompatible microenvironment to keep Cyt c biological activities, act as an effective mediator to immobilize a large number of Cyt c on the electrode and have good conductivity to improve electron transfer. Therefore, the resultant electrode exhibited good electrochemical performance and electrocatalytic activity. It could be used for electrochemical detection of H₂O₂ with rapid response, high sensitivity, wide linear range and low detection limit, as well as good stability, repeatability and selectivity. The sensor might be promising for practical application.     

Evaporation‐Induced Ordered Honeycomb Structures of Gold Nanoparticles at the Air/Water Interface

The breath figure method was used to prepare dodecanethiol‐capped gold nanoparticle macroporous structures with pore diameters from 1.7 to 3.5 μm on an air/water interface. A two‐step procedure is proposed for the fabrication of these macroporous structures, by forming a surfactant monolayer on water, and drop‐casting a gold nanoparticle dispersion in chloroform onto the surfactant monolayer. The self‐assembled films are easily transferred from the water surface onto different substrates and were characterized by TEM, SEM, and AFM. Ordered honeycomb structures with different pore arrays (perforated monolayer films, hexagonal networks and alveoli‐like porous films) were obtained. The change in morphology is concentration dependent, and deformed structures with elliptic honeycomb networks are also observed. In addition, honeycomb films using gold nanoparticles stabilized by a weakly bound ligand (dioctadecyldimethylammonium chloride) were formed by the same technique. These films have potential as substrates for surface‐enhanced Raman spectroscopy.     

Lamellar multilayer hexadecylaniline-modified gold nanoparticle films deposited by the Langmuir-Blodgett technique

Organization of hexadecylaniline (HDA)-modified colloidal gold particles at the air-water interface and the formation thereafter of lamellar, multilayer films of gold nanoparticles by the Langmuir-Blodgett technique is described in this paper. Formation of HDA-capped gold nanoparticles is accomplished by a simple biphasic mixture experiment wherein the molecule hexadecylaniline present in the organic phase leads to electrostatic complexation and reduction of aqueous chloroaurate ions, capping of the gold nanoparticles thus formed and phase transfer of the now hydrophobic particles into the organic phase. Organization of gold nanoparticles at the air-water interface is followed by surface pressure—area isotherm measurements while the formation of multilayer films of the nanoparticles by the Langmuir-Blodgett technique is monitored by quartz crystal microgravimetry, UV-Vis spectroscopy, Fourier transform infrared spectroscopy and transmission electron microscopy.     

Ultrafast Heme Dynamics of Ferric Cytochrome c in Different Environments: Electronic,Vibrational, and Conformational Relaxation

The excited‐state dynamics of ferric cytochrome c (Cyt c), an important electron‐transfer heme protein, in acidic to alkaline medium and in its unfolded form are investigated by using femtosecond pump–probe spectroscopy, exciting the heme and Tryptophan (Trp) to understand the electronic, vibrational, and conformational relaxation of the heme. At 390 nm excitation, the electronic relaxation of heme is found to be ≈150 fs at different pH values, increasing to 480 fs in the unfolded form. Multistep vibrational relaxation dynamics of the heme, including fast and slow processes, are observed at pH 7. However, in the unfolded form and at pH 2 and 11, fast phases of vibrational relaxation dominate, revealing the energy dissipation occurring through the covalent bond interaction between the heme and the nearest amino acids. A significant shortening of the excited‐state lifetime of Trp is observed at various pH values at 280 nm excitation due to resonance energy transfer to the heme. The longer time constant (25 ps) observed in the unfolded form is attributed to a complete global conformational relaxation of Cyt c.     

Pistacia integerrima gall extract mediated green synthesis of gold nanoparticles and their biological activities

This paper reports a rapid, facile and one-pot synthesis of environmentally safe gold nanoparticles capped and stabilized with galls extract of Pistacia integerrima. The aqueous gold ions when exposed to P. integerrima galls extract were rapidly reduced as evident from abrupt color change to ruby red, suggesting the biosynthesis of gold nanoparticles (Au-NPs) which were further characterized by UV–Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). Their stability was evaluated against varying pH and different volumes of sodium chloride (NaCl) as well as at a range of temperature (20–80 °C). Au-NPs were tested for enzyme inhibition, antibacterial, antifungal, antinociceptive, muscle relaxant and sedative activities. The UV–Vis spectra of the gold nanoparticles gave surface plasmon resonance at 540 nm while the SEM analysis revealed the particle size in the range of 20–200 nm. FTIR spectra confirmed the involvement of amines, amide groups and alcohols in capping and reduction of gold nanoparticles. Au-NPs showed remarkable stability in different NaCl and pH solutions as well as at elevated temperature. Au-NPs have good antifungal activity and possessed antinociceptive and muscle relaxant properties as observed from their zone of inhibition and significant attenuation of acetic acid induced writhing and reduction of time spent on the rota rod respectively. These results concluded that the gall extract of P. integerrima is a very good bioreductant for the synthesis of gold nanoparticles that have potential for various biomedical and pharmaceutical applications.     

In-situ infrared study of the adsorption and oxidation of oxalic acid at single-crystal and thin-film gold electrodes: a combined external reflection infrared and ATR-SEIRAS approach

The adsorption and oxidation of oxalic acid at gold electrodes were studied by in-situ infrared spectroscopy. External reflection experiments carried out with gold single-crystal electrodes were combined with internal reflection (ATR-SEIRAS) experiments with gold thin-film electrodes. These gold thin films, with a typical thickness of ca. 35 nm, were deposited on silicon substrates by argon sputtering. As previously reported for evaporated gold films, the voltammetric curves obtained in sulfuric acid solutions after electrochemical annealing show typical features related to the presence of wide bidimensional (111) domains with long-range order. The in-situ infrared data collected for solutions of pH 1 confirmed the potential-dependent adsorption of either oxalate (Au(100)) or a mixture of bioxalate and oxalate (Au(111), Au(110), and gold thin films) anions in a bidentate configuration. The better signal-to-noise ratio associated with the SEIRA effect in the case of the gold thin-film electrodes allows the observation of the carbonyl band for adsorbed bioxalate that was not detected in the external reflection experiments. Besides, additional bands are observed between 2000 and 3000 cm(-)(1) that can be tentatively related to the formation of hydrogen bonds between neighboring bioxalate anions. The intensities of these bands decrease with increasing solution pH values, disappearing for pH 3 solutions in which adsorbed oxalate anions are the predominant species. The analysis of the intensities of the nu(s)(O-C-O) and nu(C-OH) + delta(C-O-H) bands for adsorbed oxalate and bioxalate, respectively, suggests that the pK(a) for the surface equilibrium between these species is significantly lower than that for the solution equilibrium.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Reversible assembly and disassembly of gold nanoparticles directed by a zwitterionic polymer

Herein, we have successfully introduced the stimuli-response concept into the controllable synthesis of gold nanoparticles (AuNPs) with designed properties. We used a pH-responsive zwitterionic polymer that acted as a template and a stabilizer. Gold colloids prepared in situ from the polymer solution have a narrow size distribution of about 5 nm. The assembly and disassembly of AuNPs can be finely tuned by modulating the net charges of the zwitterionic polymer so that they are either positive or negative as a function of the solution pH. Different aggregates and colors appear on altering the solution pH. In acidic solutions, gold colloids form large symmetrical aggregates, while the AuNPs disperse in solutions with a pH approximately 9.6. However, as the solution pH increases (>9.6), needle-like aggregates with a small interparticle distances are formed. On the basis of TEM, SEM, 1H NMR and UV/Vis measurements, we attribute pH-triggered aggregation and color changes of the gold colloids to the ionization process and conformational change of the polymer. The ionization process governs the choice of ligand anchored on the surface of AuNPs, and the conformational change of the polymer modulates the interspaces between AuNPs. The present approach, which is based on a rational design of the physicochemical properties of the template used in the synthesis process, provides a powerful means to control the properties of the nanomaterial. Furthermore, the colorimetric readout can be visualized and applied to future studies on nanoscale switches and sensors.     

Aggregation of photolytic gold nanoparticles at the surface of chitosan films

Formation and aggregation of photolytic gold nanoparticles at the surface of chitosan (CTO) films have been investigated. When thin films of chloroauric acid salt of CTO were irradiated with UV light in wet air at room temperature for 10 min, gold nanoparticles of approximately 10 nm size are formed at the film surface. Detailed X-ray photoelectron spectroscopy (XPS) study and field emission type scanning electron microscopy (FE-SEM) observation have been carried out to characterize gold nanoparticles at the film surface. The shift of Au(4f) peak to the higher energy side and broadening of full width at half-maximum in the XPS spectrum are the direct evidence of the existence of gold atoms and small clusters in the early stage of photolysis. According to FE-SEM observation, growth in the particle diameter and aggregation of nanoparticles were observed after prolonged irradiation, and, finally, the film surface was densely covered with gold particles of 20-100-nm size. Gold atoms and clusters could move in the film and precipitate to the irradiated surface. Chemical composition analysis further suggests that gold particles at the surface are covered with an ultrathin CTO layer, which is partly oxidized by oxygen and chlorinated by chlorine during photochemical reactions.