Assembly of colloidal particles into microwires using an alternating electric field

We have investigated the dielectrophoretic assembly of colloidal gold, carbon black, and carbon nanotubes into electrical wires. The resulting microwires have diameters less than 1 microm, with lengths ranging from 5 microm to 3 mm. Current-voltage curves for these wires indicate an ohmic response, where the resistance is determined by the type of colloid and by the frequency of the alternating field used to grow the wires. The predicted frequency dependence of dielectrophoresis is confirmed by experiment. Measurements of the threshold voltage for initial wire growth are also presented. These experiments demonstrate that a variety of nanoparticles can be assembled into microwires for sensor applications.     

Magnetic-field-induced assemblies of cobalt nanoparticles

Under the influence of a 0.05 T magnetic field, 15-nm diameter cobalt nanoparticles covered with surfactants in a colloidal solution assemble into highly constrained linear chains along the direction of the magnetic field. The magnetic-field-induced (MFI) chains become floppy after removal of the field, folding into three-dimensional (3D) coiled structures upon gentle agitation. The 3D structures are broken into smaller units with vigorous agitation. The nanoparticles redisperse into the solvent upon ultrasonic agitation. Optical microscopy and transmission electron microscopy (TEM) are used to characterize the morphologies of the nanoparticle assemblies at various stages of this reversible process. The hysteresis loops and zero-field cooled/field cooled (ZFC/FC) curves reveal the interparticle coupling in the assemblies. MFI assembly provides a powerful tool to manipulate magnetic nanoparticles.     

Dielectrophoresis induced clustering regimes of viable yeast cells

We experimentally study the transient clustering behavior of viable yeast cells in a dilute suspension suddenly subjected to a nonuniform alternating current (AC) electric field of a microelectrode device. The frequency of the applied electric field is varied to identify two distinct regimes of positive dielectrophoresis. In both regimes, the yeast cells eventually cluster at electrodes' edges, but their transient behavior as well as their final arrangement is quite different. Specifically, when the frequency is much smaller than the cross-over frequency, the nearby yeast cells quickly rearrange in well-defined chains which then move toward the electrodes' edges and remain aligned as elongated chains at their final location. However, when the frequency is close to the cross-over frequency, cells move individually toward the regions of collection and simply agglomerate along the electrodes' edges. Our analysis shows that in the first regime both the dielectrophoretic (DEP) force and the mutual DEP force, which arises due to the electrostatic particle-particle interactions, are important. In the second regime, on the other hand, the DEP force dominates.     

Dynamically controlled dielectrophoresis using resonant tuning

Electrically polarizable micro- and nanoparticles and droplets can be trapped using the gradient electric field of electrodes. But the spatial profile of the resultant dielectrophoretic force is fixed once the electrode structure is defined. To change the force profile, entire complex lab-on-a-chip systems must be re-fabricated with modified electrode structures. To overcome this problem, we propose an approach for the dynamic control of the spatial profile of the dielectrophoretic force by interfacing the trap electrodes with a resistor and an inductor to form a resonant resistor–inductor–capacitor (RLC) circuit. Using a dielectrophoretically trapped water droplet suspended in silicone oil, we show that the resonator amplitude, detuning, and linewidth can be continuously varied by changing the supply voltage, supply frequency, and the circuit resistance to obtain the desired trap depth, range, and stiffness. We show that by proper tuning of the resonator, the trap range can be extended without increasing the supply voltage, thus preventing sensitive samples from exposure to high electric fields at the stable trapping position. Such unprecedented dynamic control of dielectrophoretic forces opens avenues for the tunable active manipulation of sensitive biological and biochemical specimen in droplet microfluidic devices used for single-cell and biochemical reaction analysis.     

Dielectrophoretic assembly of metallodielectric Janus particles in AC electric fields

"Janus" particles with two hemispheres of different polarizability or charge demonstrate a multitude of interesting effects in external electric fields. We reported earlier how particles with one metallic hemisphere and one dielectric hemisphere self-propel in low-frequency alternating current (AC) electric fields. Here, we demonstrate the assembly of such Janus particles driven by AC electric fields at frequencies above 10 kHz. We investigated the relation between field-induced dielectrophoretic force, field distribution, and structure of the assemblies. The phase space for electric field intensity and frequency was explored for particle concentrations large enough to form a monolayer on a glass surface between two gold electrodes. A rich variety of metallodielectric particle structures and dynamics were uncovered, which are very different from those obtained from directed assembly of plain dielectric or plain conductive particles under the action of fields of similar frequency and intensity. The metallodielectric particles assemble into new types of chain structures, where the metallized halves of neighboring particles align into lanes along the direction of the electric field, while the dielectric halves face in alternating direction. The staggered chains may assemble in various orientations to form different types of two-dimensional metallodielectric crystals. The experimental results on the formation of staggered chains are interpreted by means of numerical simulations of the electric energy of the system. The assembly of Janus metallodielectric particles may find applications in liquid-borne microcircuits and materials with directional electric and heat transfer.     

Synthesis of Carbon–Metal Multi-Strand Nanocomposites by Discharges in Heptane Between Two Metallic Electrodes

We studied composite wires assembled from electric field-driven nanoparticles in a dielectric liquid (heptane) to elucidate the exact processes and controlling factors involved in the synthesis of the multi-phase nanocomposites. Filamentary wires are synthesized by a two-step process: (1) abundant nanoparticle production, mostly of carbonaceous types, from heptane decomposition by spark discharge and of metal nanoparticles by electrode erosion and (2) assembly of hydrogenated amorphous carbonaceous nano-clusters with incorporated metal nanoparticles forming wires by dielectrophoretic transport while maintaining a high electric field between electrodes kept sufficiently separated to avoid breakdown. Four types of nanocomposites products are identified to form at different steps in distinctive zones of the setup. The black carbonaceous agglomerates with metal spherules made by electrode erosion represent the pyrolytic residues of heptane decomposition by spark discharge during step 1. The filamentary wires grown in the interelectrode gap during step 2 get assembled by dielectrophoretic transport and chaining forces. Their great stability is shown to express the concurrent effect of polymerization favoured by the abundance of metal catalysts. The nature, abundance, and transformation of solid particles from the source materials versus discharge conditions control the morphological and compositional diversity of the wires. The production of mineral and metal nano-particles traces the efficiency of dielectrophoresis to separate compound particle mixtures by size and to co-synthesize nanostructured microcrystals and nanocomposites. The link between impurities and the variability from nano- to micro-scales of the synthesized products provides an innovative contribution to the knowledge of nanocomposite synthesis triggered by electric field.     

Control and modeling of the dielectrophoretic assembly of on-chip nanoparticle wires

Suspensions of metallic nanoparticles in water were assembled via the action of an alternating electric field (dielectrophoresis) into wires of micrometer thickness. Two modes of microwire assembly, one through the bulk of the suspension and one as half-cylinders on the glass surface between the electrodes, were identified. The operating conditions responsible for the two assembly modes were recognized. The control of the process parameters allows making, for example, straight single connectors or massively parallel arrays of microwires on the surface of the chip, which can be extracted in dry form. The microwire assembly process was modeled using finite element electrostatic calculations. The direction of growth can be guided by introducing conductive islands or particles in the suspension. The experiments, supported by electrostatic calculations, show that the wires grow in the direction of highest field intensity, "automatically" making electrical connections to the objects between the electrodes. The results point the way to controlled dielectrophoretic assembly of nanoparticles into on-chip electrical connectors, switches, and networks.     

Direct numerical simulation of electrokinetic translocation of a cylindrical particle through a nanopore using a Poisson-Boltzmann approach

Nanopore-based sensing of single molecules is based on a detectable change in the ionic current arising from the electrokinetic translocation of individual nanoparticles through a nanopore. In this study, we propose a continuum-based model to investigate the dynamic electrokinetic translocation of a cylindrical nanoparticle through a nanopore and the corresponding ionic current response. It is the first time to simultaneously solve the Poisson-Boltzmann equation for the ionic concentrations and the electric field contributed by the surface charges of the nanopore and the nanoparticle, the Laplace equation for the externally applied electric field, and the modified Stokes equations for the flow field using an arbitrary Lagrangian-Eulerian method. Current blockade due to the particle translocation is predicted when the electric double layers (EDLs) of the particle and the nanopore are not overlapped, which is in qualitative agreement with existing experimental observations. Effects due to the electric field intensity imposed, the EDL thickness, the nanopore's surface charge, the particle's initial orientation and lateral offset from the nanopore's centerline on the particle translocation including both translation and rotation, and the ionic current response are comprehensively investigated. Under a relatively low electric field imposed, the particle experiences a significant rotation and a lateral movement. However, the particle is aligned with its longest axis parallel to the local electric field very quickly due to the dielectrophoretic effect when the external electric field is relatively high.     

Dielectrophoretic force microscopy of aqueous interfaces

A novel scanning probe microscopy technique has allowed dielectrophoretic force imaging with nanoscale spatial resolution. Dielectrophoresis (DEP) traditionally describes the mobility of polarizable particles in inhomogeneous alternating current (ac) electric fields. Integrating DEP with atomic force microscopy allows for noncontact imaging with the image contrast related to the local electric polarizability. By tuning the ac frequency, dielectric spectroscopy can be performed at solid/liquid interfaces with high spatial resolution. In studies of cells, the frequency-dependent dielectrophoretic force is sensitive to biologically relevant electrical properties, including local membrane capacitance and ion mobility. Consequently, dielectrophoretic force microscopy is well suited for in vitro noncontact scanning probe microscopy of biological systems.     

Microdevices for manipulation and accumulation of micro- and nanoparticles by dielectrophoresis

Microfluidic devices with three-dimensional (3-D) arrays of microelectrodes embedded in microchannels have been developed to study dielectrophoretic forces acting on synthetic micro- and nanoparticles. In particular, so-called deflector structures were used to separate particles according to their size and to enable accumulation of a fraction of interest into a small sample volume for further analysis. Particle velocity within the microchannels was measured by video microscopy and the hydrodynamic friction forces exerted on deflected particles were determined according to Stokes law. These results lead to an absolute measure of the dielectrophoretic forces and allowed for a quantitative test of the underlying theory. In summary, the influence of channel height, particle size, buffer composition, electric field, strength and frequency on the dielectrophoretic force and the effectiveness of dielectrophoretic deflection structures were determined. For this purpose, microfluidic devices have been developed comprising pairs of electrodes extending into fluid channels on both top and bottom side of the microfluidic channels. Electrodes were aligned under angles varying from 0 to 75 degrees with respect to the direction of flow. Devices with channel height varying between 5 and 50 microm were manufactured. Fabrication involved a dedicated bonding technology using a mask aligner and UV-curing adhesive. Particles with radius ranging from 250 nm to 12 microm were injected into the channels using aqueous buffer solutions.     

Field induced formation of mesoscopic polymer chains from functional ferromagnetic colloids

The assembly and direct imaging of ferromagnetic nanoparticles into one-dimensional mesostructures (1-D) are reported. Polymer-coated ferromagnetic colloids (19 nm, 24 nm) were assembled at a crosslinkable oil-water interface under both magnetic field induced and zero-field conditions and permanently fixed into 1-D mesoscopic polymer chains (1-9 mum) in a process referred to as Fossilized Liquid Assembly (FLA). In the FLA process, nanoparticle chains were fixed at the oil interface through photopolymerization, enabling direct visualization of organized mesostructures using atomic force microscopy. Using the FLA methodology, we systematically investigated different conditions and demonstrated that dispersed ferromagnetic colloids possess sufficient dipolar interactions to organize into mesoscopic assemblies. Application of an external magnetic field during assembly enabled the formation of micron-sized chains which were aligned in the direction of the applied field. This universal methodology is an attractive alternative technique to cryogenic transmission electron microscopy (cryo-TEM) for the visualization of nanoparticle assembly in dispersed organic media.     

Controlling the self-assembly structure of magnetic nanoparticles and amphiphilic block-copolymers: from micelles to vesicles

We report how to control the self-assembly of magnetic nanoparticles and a prototypical amphiphilic block-copolymer composed of poly(acrylic acid) and polystyrene (PAA-b-PS). Three distinct structures were obtained by controlling the solvent-nanoparticle and polymer-nanoparticle interactions: (1) polymersomes densely packed with nanoparticles (magneto-polymersomes), (2) core-shell type polymer assemblies where nanoparticles are radially arranged at the interface between the polymer core and the shell (magneto-core shell), and (3) polymer micelles where nanoparticles are homogeneously incorporated (magneto-micelles). Importantly, we show that the incorporation of nanoparticles drastically affects the self-assembly structure of block-copolymers by modifying the relative volume ratio between the hydrophobic block and the hydrophilic block. As a consequence, the self-assembly of micelle-forming block-copolymers typically produces magneto-polymersomes instead of magneto-micelles. On the other hand, vesicle-forming polymers tend to form magneto-micelles due to the solubilization of nanoparticles in polymer assemblies. The nanoparticle-polymer interaction also controls the nanoparticle arrangement in the polymer matrix. In N,N-dimethylformamide (DMF) where PS is not well-solvated, nanoparticles segregate from PS and form unique radial assemblies. In tetrahydrofuran (THF), which is a good solvent for both nanoparticles and PS, nanoparticles are homogeneously distributed in the polymer matrix. Furthermore, we demonstrated that the morphology of nanoparticle-encapsulating polymer assemblies significantly affects their magnetic relaxation properties, emphasizing the importance of the self-assembly structure and nanoparticle arrangement as well as the size of the assemblies.     

Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.     

硫化汞纳米组装链的诱导合成及其光学性能

选择一种高活性模板剂通过简单的诱导组装工艺, 合成了结构均一有序的硫化汞一维纳米组装链, 该纳米链由直径约为30 nm的粒子组装而成, 长度约0.6-1.0 μm. 通过XRD、TEM、FT-IR、UV-Vis光谱等手段对产物结构进行了表征. UV-Vis实验结果发现, 产物具有良好的紫外吸收性能. 产物对荧光素具有灵敏的荧光猝灭效应, 预计在微观修饰、纳米器件、样品检测等领域具有潜在的应用价值. 同时还对产物的形成机理做了初步探讨.     

Preparation and encapsulation of highly fluorescent conjugated polymer nanoparticles

A facile method has been developed to prepare aqueous dispersions of encapsulated conjugated polymer nanoparticles exhibiting high fluorescence brightness. Salient features of the nanoparticles include their small diameter and spherical morphology. Encapsulation of the nanoparticles with a silica shell reduces the rate of photooxidation and allows facile attachment of functional groups for subsequent bioconjugation and nanoparticle assembly. Functionalization of the nanoparticle with amine groups followed by the addition of Au nanoparticles resulted in the formation of nanoparticle assemblies, as evidenced by the efficient quenching of the conjugated polymer fluorescence by the Au nanoparticles.     

Frequency-dependent shape changes of colloidal clusters under transverse electric field

We have studied clustering of colloidal particles under the influence of an ac electric field as a function of frequency. The field was applied in a direction perpendicular to the confining walls. Two regimes are observed, a low frequency regime where the clusters are isotropic with a local triangular order, as reported earlier in the literature, and a new high-frequency regime where the clusters are highly elongated (anisotropic) with no local order. The crossover from one regime to the other occurs at a critical frequency, f(c). The threshold field for the cluster formation, E(th), increases with frequency in both the regimes. An increase in the particle size leads to a reduction in both E(th) and f(c). We present evidence to show that the elongated structures seen at high frequency are related to the field inhomogeneities at imperfections on the conducting surface. We also propose a possible mechanism based on hydrodynamic flow considerations to explain the formation of these clusters.     

Bottom-up assembly of colloidal gold and silver nanostructures for designable plasmonic structures and metamaterials

We report on bottom-up assembly routes for fabricating plasmonic structures and metamaterials composed of colloidal gold and silver nanostructures, such as nanoparticles ("metatoms") and shape-controlled nanocrystals. Owing to their well-controlled sizes/shapes, facile surface functionalization, and excellent plasmonic properties in the visible and near-infrared regions, these nanoparticles and nanocrystals are excellent building blocks of plasmonic structures and metamaterials for optical applications. Recently, we have utilized two kinds of bottom-up techniques (i.e., multiple-probe-based nanomanipulation and layer-by-layer self-assembly) to fabricate strongly coupled plasmonic dimers, one-dimensional (1D) chains, and large-scale two-dimensional/three-dimensional (2D/3D) nanoparticle supercrystals. These coupled nanoparticle/nanocrystal assemblies exhibit unique and tunable plasmonic properties, depending on the material composition, size/shape, intergap distance, the number of composing nanoparticles/nanocrystals (1D chains), and the nanoparticle layer number in the case of 3D nanoparticle supercrystals. By studying these coupled nanoparticle/nanocrystal assemblies, the fundamental plasmonic metamaterial effects could be investigated in detail under well-prepared and previously unexplored experimental settings.     

Structural control of peptide-coated gold nanoparticle assemblies by the conformational transition of surface peptides

Gold nanoparticles having peptide chains on the surfaces have been prepared yb ring-opening polymerization of gamma-methyl L-glutamate N-carboxyanhydride with fixed amino groups on the nanoparticle surface as an initiator. The number of peptide chains on the surface was adjusted to ca. 2 molecules per gold nanoparticle by controlling the number of fixed amino groups on the surface. The peptide chains on the surface were partially saponified to obtain poly(gamma-methyl L-glutamate-co-L-glutamic acid) with 28 mol% of glutamic acid residues. The number-average molecular weight of the peptide was 73,000. We described structural control of the peptide-coated gold nanoparticle assembly by conformational transition of the surface peptides. In deionized water, the peptide chains on the nanoparticle took a random coil conformation, and the individual nanoparticles existed in dispersed globular species. On the other hand, the peptide chains on the nanoparticle took an alpha-helical conformation in trifluoroethanol. Under this condition, the alpha-helical peptide chains on distinct gold nanoparticles connected the nanoparticles to form a fibril assembly owing to the dipole-dipole interaction between the surface peptide chains. The morphology of the peptide-coated gold nanoparticle assembly could be controlled by the conformational transition of surface peptides, which was attended by solution composition changes.     

Superparamagnetic blocking and superspin-glass freezing in ultra small δ-(Fe(0.67)Mn(0.33))OOH particles

The magnetic properties of ultra-small (~2 nm) δ-(Fe(0.67)Mn(0.33))OOH nanoparticles prepared by a microemulsion technique have been investigated by magnetization and ac susceptibility measurements at variable frequency. The results provide evidence of two different magnetic regimes whose onset is identified by two maxima in the zero-field-cooled susceptibility: a large one, centered at ~150 K (T(mh)), and a narrow one at ~30 K (T(ml)). The two temperatures exhibit a different frequency dependence: T(mh) follows a Vogel-Fulcher law τ = τ(0)exp[(E(a)/k(B))/(T-T(0))], indicating a blocking of weakly interacting nanoparticle moments, whereas T(ml) follows a power law τ = τ(0)(T(g)/T(mν)-T(g))(α), suggesting a collective freezing of nanoparticle moments (superspin-glass state). This picture is coherent with the field dependence of T(ml) and T(mh) and with the temperature dependence of the coercivity, strongly increasing below 30 K.     

Two-dimensional self-assemblies of silica nanoparticles formed using the "bubble deposition technique"

Two-dimensional silica nanoparticle assemblies were obtained by deposition of bubble made from a surfactant solution containing nanoparticles onto hydrophobic silicon substrate. The morphologies of the nanoparticle assemblies can be finely controlled by several experimental parameters, including surfactant concentration, nanoparticle concentration, and deposition time. Monolayer of nanoparticles with surface coverage of about 100% can be obtained under appropriate conditions. The method can also be applied to another hydrophobic substrate, HMDS (hexamethyldisilazane)-modified silicon substrate. Furthermore, it can be applied directly to lithography patterned substrates, meaning a high compatibility with the well-developed conventional top-down approaches to nanodevices. This bubble deposition technique is expected to be a promising method in the field of nano-object assembly and organization and has great application potentials.