杯芳烃衍生物的合成3

通过杯[4]芳烃的酚羟基的烷基化和苯环上的乙酰化制备了一系列的新的对乙酰基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(4a)、n-C~8H~1~7(4b)、n-C~1~2H~2~5(4c)和n-C~1~6H~3~3(4d)。核磁共振研究表明这些新的杯芳烃都是锥形(cone)构象。     

25-[(乙氧基羰基)甲氧基]-26,27,28-三丁氧基对叔丁基杯[4]芳烃的合成

以对叔丁基杯[4]芳烃为起始原料,合成了25-羟基-26,27,28-三丁氧基对叔丁基杯[4]芳烃(2)和25-[(乙氧基羰基)甲氧基]-26,27,28-三丁氧基对叔丁基杯[4]芳烃(3),2和3的结构经1HNMR和IR表征。通过正交实验[L16(45)和L9(33)]优化了实验条件,使3的总收率提高到60%。     

新型杯[4]芳烃活化KOH催化合成O,O-二烷基-S-芳(烷)基磷酸酯

合成了新型杯[4]芳烃3,实验表明在杯[4]芳烃3(5.0 mol%)和KOH(20 mol%)存在下,O,O-二烷基亚膦酸酯与二芳(烷)基二硫醚的反应有效进行,较高产率得到O,O-二烷基-S-芳(烷)基磷酸酯.杯[4]芳烃3经6次重复实验后,反应产率没有明显降低.本方法避免了有恶臭气味、毒性较大的试剂的使用,为磷酸硫酯的合成提供了一条简便有效的路径.     

四氯合金属(II)酸烷铵在280-500K间的热力学性质和相变:III.四氯合镉(II)酸n-十二烷铵

在280-500K温度范围内用自动绝热量热计测量了(n-C~1~2H~2~5NH~3)~2CdCl~4的热容。在所研究的温度范围内发现一个固-固相转变, 其相变温度, 相变焓和相变熵分别为(332.4±0.1)K,(48.35±0.33)kJ.mol^-^1和(145.5±1.0)J.K^-^1.mol^-^1。结合已发表的(n-C~1~2H~2~5NH~3)~2MCl~4(M=Mn, Zn)的相变参数讨论了此类配合物的中心原子对其相变的影响。[MCl~4]^2^-配位方式的不同被认为是该类配合物的相变热参数产生差异的主要原因。     

四氯合金属(II)酸烷铵在280-500K间的热力学性质和相变:III.四氯合镉(II)酸n-十二烷铵

在280-500K温度范围内用自动绝热量热计测量了(n-C~1~2H~2~5NH~3)~2CdCl~4的热容。在所研究的温度范围内发现一个固-固相转变, 其相变温度, 相变焓和相变熵分别为(332.4±0.1)K,(48.35±0.33)kJ.mol^-^1和(145.5±1.0)J.K^-^1.mol^-^1。结合已发表的(n-C~1~2H~2~5NH~3)~2MCl~4(M=Mn, Zn)的相变参数讨论了此类配合物的中心原子对其相变的影响。[MCl~4]^2^-配位方式的不同被认为是该类配合物的相变热参数产生差异的主要原因。     

杯芳烃与NO2硝化反应的研究

系统地研究了羟基杯[n]芳烃、甲氧基杯[n]芳烃和对特丁基杯[n]芳烃(n＝4, 6, 8)与NO₂气体的硝化反应, 发现可以成功地得到25,26,27,28-四羟基杯[4]芳烃、37,38,39,40,41,42-六羟基杯[6]芳烃以及25,26,27,28-四甲氧基杯[4]芳烃的对位全硝化产物, 产率分别为90%, 70%和40%; 尤其是25,26,27,28-四羟基杯[4]芳烃与NO₂的反应20 min即可完成. 认为共振式酚氧负离子结构是影响该类硝化反应的关键, 并对反应机理进行了探讨.     

偶氮和亚氨基团作为下垂螯合臂的新型杯[4]芳烃衍生物的合成及性质

以对叔丁基杯[4]芳烃为原料,经过取代、缩合等多步反应,合成了5个下缘同时含有偶氮和亚氨基团的新型杯[4]芳烃衍生物,其结构经IR、1H NMR、13C NMR和元素分析进行了表征.并通过UV/Vis光谱研究了其对金属离子的识别作用.结果发现化合物25,27-二羟基-26,28-二{2-[2-(N-(4-苯偶氮基-1-萘基)亚氨基次甲基)苯氧基]乙氧基}对叔丁基杯[4]芳烃(4c)对Al3+和Sn2+有较好的识别作用,而化合物25,27-二羟基-26,28-二{2-[2-(N-(4-(4-甲基苯偶氮基)-1-萘基)亚氨基次甲基)苯氧基]乙氧基}对叔丁基杯[4]芳烃(4e)可以专一性地识别Al3+,其与Al3+络合的物质的量比为1∶1.     

三羰基(五甲二硅基)环戊二烯基钼衍生物的合成和结构

通过三羰基(五甲二硅基)环戊二烯基钼负离子盐[η-Me~5Si~2C~5H~4Mo(CO)~3]^-Li^+的反应合成了标题化合物, 以元素分析、IR和1^H NMR谱表征了它们的结构, 并用X射线衍射测定了配合物[η-Me~5Si~2C~5H~4MoBr(CO)~3]和[η-Me~5Si~2C~5H~4Mo(CO)~3]~2的晶体结构。     

具有酯基和酰氨基的新型杯[4]冠醚与杯[6]冠醚的合成

乙醇胺与氯乙酰氯反应得到Ⅳ一(2．氯乙酸酯基乙基)一氯乙酰胺(1)．1与杯 [4]芳烃和杯[6]芳烃分别在K2c03／苯和K2c03／甲苯体系中反应48 h，以37％和 25％的产率得到具有酯基和酰氨基的杯芳烃冠醚．经核磁、质谱、元素分析等表征 证实杯[4]冠醚为l，3．桥联方式，杯[6]冠醚为l，4．桥联方式，且均采取杯式构 象．     

含苯并噁唑基的硫桥杯[4]芳烃衍生物的合成及结构

在碳酸钾存在下, 对叔丁基硫桥杯[4]芳烃(1)分别与端基二溴代烷和碘甲烷反应, 生成硫桥杯[4]芳烃衍生物2～4. 含端基溴代的硫桥杯[4]芳烃衍生物2和4分别与2-巯基苯并噁唑在碳酸钾存在下反应, 生成硫桥杯[4]芳烃衍生物5a～5d. 通过1H NMR, 13C NMR, IR, MS和元素分析等手段对产物进行了表征. 同时, X射线分析确定了硫桥杯[4]芳烃5b的晶体结构.     

Synthesis and reactivity of functionalized bridged m-xylylenedioxycalix[6]arenes

The synthesis of A,D-m-xylylene-bridged calix[6]arenes 1-8 functionalized at position 5 of the spacer arm is described. The cone conformation of the new bridged calix[6]arenes has been established by (1)H and (13)C NMR. The X-ray structure of compound 6 confirmed the cone conformation also in the solid state. Compounds 9 and 10, which are branched-like structures, were obtained by reductive amination of 5-amino-A,D-m-xylylene-bridged-B,C,E,F-tetra-O-ethylcalix[6]arene 7 with diformyl calix[4]arene and CTV derivatives 22 and 24, respectively.     

A,C-Bridged Calix[6]arene： Relationship between the Length of Bridge and Conformation

Three new A,C-diamide bridged p-tert-butylcalix[6]arenes were synthesized from p-tert-butylcalix[6]arenes by bridging ClCH2CONH(CH2)nNHCOCH2Cl(n=3,4,6) in acetonitrile using K2CO3 as a base in 17%-25% yields.It was found that the bridged calix[6]arenes with shorter bridges (n=2,3,4 in N′,N′-bischloroacetodiamines) adopt cone conformation, but the last one (n=6) adopts alternate conformation, i.e., accompanying the lengthening of bridge, the conformation of A,C-bridged calix[6]arenes changes from cone to alternate.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Synthesis and self-assembly of thio derivatives of calix[4]arene on noble metal surfaces

Self-assembled monolayers (SAMs) provide a simple route to functionalize electrode surfaces with organic molecules. Herein we use cavity-containing derivatives of calix[4]arenes in SAMs. Bound to noble metal surface, the assembled molecules are candidates to serve as molecular sieves for H 2 molecules and H (+) ions, which could have relevance for fuel cell applications. Tetra- O-alkylated calix[4]arenes with thiolacetate and thiolamide wide-rim anchoring groups in cone and partial-cone conformations were designed, synthesized and self-assembled onto Au, Pt, and Pd surfaces. The resulting SAMs were systematically examined. Single crystal X-ray diffraction of 5,11,17,23-tetrakis(thioacetyl)-25,26,27,28-tetra- i-propoxycalix[4]arene confirmed the cone conformation and revealed the cavity dimensions of the SAMs that were formed by immersing noble metal substrates (Au, Pt and Pd deposited on Si-wafers) in solutions of calix[4]arenes. Surface characterization techniques including ellipsometry, cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) were used, indicating that the metal surface is terminated with a monomolecular layer. Experimental thicknesses obtained from the ellipsometry are consistent with the calculated values. CV results showed 50 to 80% physical passivation against the Fe(CN) 6 (3-/4-) couple, implying an overall relatively low concentration of defects and pinholes in the films. The binding energies of the S2p core level in the XPS were consistent with the literature values and revealed that up to 3.2 out of four anchoring groups were bonded to the noble metal surface.     

Cooperative intramolecular hydrogen bond and conformations of thiocalix[4]arene molecules

The joint FTIR spectroscopic study and ab initio quantum-chemical calculations (HF/3-21G and PBE/TZ2P methods) showed that thiocalix[4] arene molecules adopt the cone conformation in CCl₄ solutions. The weakening of the cooperative intramolecular H bond in thiocalix[4]arenes compared to the corresponding calix[4]arenes can be due to the larger thiocalixarene macrocycle, bifurcated hydrogen bond in it, and electron density transfer from the bridging S atom to the benzene ring.     

Synthesis of 2-alkyl- and 2-carboxy-p-tert-butylcalix[4]arenes via the lithiation of tetramethoxy-p-tert-butylcalix[4]arene

[reaction: see text]. Tetramethoxy-p-tert-butylcalix[4]arene reacts readily with n-butyllithium to give a putative monolithiated intermediate that is substituted with alkyl halides and carbon dioxide to give in 60-75% yield conformationally mobile calix[4]arenes monosubstituted at the methylene bridge (2-position). 2-Alkyl- and 2-benzyl-substituted tetramethoxycalix[4]arenes are converted in 62-68% overall yield to the corresponding tetrahydroxy-p-tert-butylcalix[4]arenes by treatment with boron tribromide. The tetrahydroxy-p-tert-butylcalix[4]arenes exist in the cone conformation at room temperature in CDCl3 as judged by NMR spectroscopy.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

Synthesis and structure of lower rim C-linked N-tosyl peptidocalix[4]arenes

Chiral p-tert-butylcalix[4]arenes functionalized at the lower rim with amino acid residues have been prepared. The (1)H and (13)C NMR spectra indicate that the macrocycles preferably adopt a cone conformation. Calix[4]arenes bearing amino acid moieties were prepared as a class of receptors selective for anions that are bound through hydrogen bonding with the NH group. The association constants are dependent on the nature of the substituents at the lower rim. Derivative 9 shows the strongest complexation and the largest selectivity for N-tosyl-(L)-alaninate. Finally, a preliminary X-ray crystal study of the difunctionalized receptor 6f shows the "flattened cone" conformation in the solid state.     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.