Soluble polymers with pendant 3‐en‐1‐yne groups (R) on a —[CH2—C(Me)R]n— skeleton by anionic polymerization of 2,5‐dimethylhexa‐1,5‐dien‐3‐yne

The anionic homopolymerization of 2,5‐dimethylhexa‐1.5‐dien‐3‐yne (DMDEY) was investigated by utilizing butyllithium, sec‐butyllithium, diphenylmethylsodium, and naphthalene/sodium as initiators. Soluble polymers with molecular weights up to 50 000 g/mol corresponding to M_w/M_n of 1.05 were obtained through homopolymerization with diphenylmethylsodium as initiator in THF at low temperatures. The homopolymers consist of 1,2‐linked monomer units with pendant 3‐methylbut‐3‐en‐1‐yne groups.     

Atropselective Dibrominations of a 1,1′‐Disubstituted 2,2′‐Biindolyl with Diverging Point‐to‐Axial Asymmetric Inductions. Deriving 2,2′‐Biindolyl‐3,3′‐diphosphane Ligands for Asymmetric Catalysis

On the ¹H NMR timescale, 2,2′‐biindolyls with (R)‐configured (1‐alkoxyprop)‐2‐yl, (1‐hydroxyprop)‐2‐yl, or (1‐siloxyprop)‐2‐yl substituents at C‐1 and C‐1′ are atropisomerically stable at <0 °C and interconvert at >30 °C. A 2,2′‐biindolyl (R,R)‐ 17 a of that kind and achiral (!) brominating reagents gave the atropisomerically stable 3,3′‐dibromobiindolyls (M)‐ and/or (P)‐ 18 a at best atropselectively—because of point‐to‐axial asymmetric inductions—and atropdivergently, exhibiting up to 95 % (M)‐ and as much (P)‐atropselectivity. This route to atropisomerically pure biaryls is novel and should extend to other substrates and/or different functionalizations. The dibromobiindolyls (M)‐ and (P)‐ 18 a furnished the biindolyldiphosphanes (M)‐ and (P)‐ 14 without atropisomerization. These syntheses did not require the resolution of a racemic mixture, which distinguishes them from virtually all biaryldiphosphane syntheses known to date. (M)‐ and (P)‐ 14 acted as ligands in catalytic asymmetric allylations and hydrogenations. Remarkably, the β‐ketoester rac‐ 25 c was hydrogenated trans‐selectively with 98 % ee; this included a dynamic kinetic resolution.     

Lipase‐Catalyzed Dynamic Kinetic Resolution of C1‐ and C2‐Symmetric Racemic Axially Chiral 2,2′‐Dihydroxy‐1,1′‐biaryls

We have discovered that the racemization of configurationally stable, axially chiral 2,2′‐dihydroxy‐1,1′‐biaryls proceeds with a catalytic amount of a cyclopentadienylruthenium(II) complex at 35–50 °C. Combining this racemization procedure with lipase‐catalyzed kinetic resolution led to the first lipase/metal‐integrated dynamic kinetic resolution of racemic axially chiral biaryl compounds. The method was applied to the synthesis of various enantio‐enriched C₁‐ and C₂‐symmetric biaryl diols in yields of up to 98 % and enantiomeric excesses of up to 98 %, which paves the way for new developments in the field of asymmetric synthesis.     

Manipulation of Spiroindolenine Intermediates for Enantioselective Synthesis of 3‐(Indol‐3‐yl)‐Pyrrolidines

By manipulating the reactivity of spiroindolenine species, a sequential Michael/retro‐Mannich/Mannich reaction of ω‐indol‐3‐yl α,β‐unsaturated ketones was developed. In the presence of 10 mol % of a chiral phosphoric acid as the catalyst, a series of 3‐(indol‐3‐yl)‐pyrrolidines were synthesized in high yields (up to 91 %) with excellent stereoselectivities (up to 92 % ee, >19:1 d.r.). The products obtained here undergo diverse functional‐group transformations. The mechanistic proposal of this reaction is supported by DFT calculations.     

Synthesis of Chiral 2‐Aroyl‐1‐tetralols: Asymmetric Transfer Hydrgenation of 2‐Aroyl‐1‐tetralones via Dynamic Kinetic Resolution

The dynamic kinetic resolution of 2‐aroyl‐1‐tetralones was achieved via asymmetric transfer hydrogenation using (S,S)‐RuCl(p‐cymene)TsDPEN (TsDPEN=N‐(tosyl)‐1,2‐diphenylethylenediamine) in formic acid/triethyl‐ amine (5:2, molar ratio), afforded the desired products in good yields (up to 85%) with diastereomeric ratio up to >99:1 and high enantiomeric excesses (up to >99%). The absolute configuration of major the product was confirmed by X‐ray crystal structure analysis.     

Optically Active Helical Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl]: New Ligand for Asymmetric Addition of Diethylzinc to Aryl Aldehyde

Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl] (L*) was obtained by taking off the protecting groups of poly[(S)‐3‐vinyl‐2,2′‐bis(methoxymethoxy)‐1,1′‐binaphthyl] (poly‐ 1 ). L* was proved to keep a stable helical conformation in solution. The application of helical L* in the asymmetric addition of diethylzinc to aldehydes has been studied. The catalytic system employing 10 mol% of L* and 150 mol% of Ti(OⁱPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes, giving up to 99% enantiomeric excess (ee) and up to 93% yield of the corresponding secondary alcohol at 0°C. The chiral polymer can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Synthesis and properties of fluorinated polyimides. 1. Derived from novel 4,4″‐bis(aminophenoxy)‐3,3″‐trifluoromethyl terphenyl

A new diamine monomer, 4,4″‐bis(aminophenoxy)‐3,3″‐trifluoromethyl terphenyl (ATFT) was synthesized that led to a number of novel fluorinated polyimides by solution as well as thermal imidization routes when reacted with different commercially available dianhydrides like pyromellatic dianhydride (PMDA), benzophenone tetracarboxylic acid dianhydride (BTDA), or 2,2‐bis(3,4‐dicarboxyphenyl) hexafluoropropane (6FDA). The polyimides ATFT/BTDA and ATFT/6FDA derived from both routes were soluble in several organic solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, and dimethyl sulfoxide. The polyimide ATFT/PMDA was only soluble in N‐methylpyrollidone. The polyimide films had low water absorption of 0.3–0.7%, low dielectric constants of 2.72–3.3 at 1 Hz, refractive indices of 1.594–1.647 at 589.3 nm, and optical transparency >85%. These polyimides showed very high thermal stability with decomposition temperatures (5% weight loss) up to 532 °C in air and good isothermal stability; only 7% weight loss occurred at 400 °C after 7 h, and less than 0.6% weight loss was observed at 315 °C for 5 h. Transparent thin films of these polyimides exhibited tensile strengths up to 112 MPa, a modulus of elasticity up to 3.05 GPa, and elongation at break up to 21% depending on the repeating unit structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1016–1027, 2002     

One‐pot,Three‐component Synthesis of a New Series of 2‐Amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile in the Presence of SBA‐15 as a Nanocatalyst

One‐pot, three‐component reaction of arylglyoxals, malononitrile and 4‐hydroxyquinolin‐2(1H)‐one in the presence of SBA‐15 as a nanocatalyst and using green solvent systems under various temperatures afforded the 2‐amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile derivatives. The best yield (70‐96%) were obtained using 20% mol of SBA‐15 as a nanocatalyst in H2O/EtOH (1:1) at 80 °C. The simplicity of work up procedure, using green solvent system, and good to excellent yields of products are the main advantages of this synthetic strategy.     

Asymmetric Ruthenium‐Catalyzed Hydrogenation of 2,6‐Disubstituted 1,5‐Naphthyridines: Access to Chiral 1,5‐Diaza‐cis‐Decalins

The first asymmetric hydrogenation (AH) of 2,6‐disubstituted and 2,3,6‐trisubstituted 1,5‐naphthyridines, catalyzed by chiral cationic ruthenium diamine complexes, has been developed. A wide range of 1,5‐naphthyridine derivatives were efficiently hydrogenated to give 1,2,3,4‐tetrahydro‐1,5‐naphthyridines with up to 99 % ee and full conversions. This facile and green protocol is applicable to the scaled‐up synthesis of optically pure 1,5‐diaza‐cis‐decalins, which have been used as rigid chelating diamine ligands for asymmetric synthesis.     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

Cross‐Linked‐Polymer‐Supported N‐{2′‐[(Arylsulfonyl)amino][1,1′‐binaphthalen]‐2‐yl}prolinamide as Organocatalyst for the Direct Aldol Intermolecular Reaction under Solvent‐Free Conditions

A bottom‐up strategy was used for the synthesis of cross‐linked copolymers containing the organocatalyst N‐{(1R)‐2′‐{[(4‐ethylphenyl)sulfonyl]amino}[1,1′‐binaphthalen]‐2‐yl}‐D ‐prolinamide derived from 2 (Scheme 1). The polymer‐bound catalyst 5b containing 1% of divinylbenzene as cross‐linker showed higher catalyst activity in the aldol reaction between cyclohexanone and 4‐nitrobenzaldehyde than 5a and 5c . Remarkably, the reaction in the presence of 5b was carried out under solvent‐free, mild conditions, achieving up to 93% ee (Table 1). The polymer‐bound catalyst 5b was recovered by filtration and re‐used up to seven times without detrimental effects on the achieved diastereo‐ and enantioselectivities (Table 2). The catalytic procedure with polymer 5b was extended to the aldol reaction under solvent‐free conditions of other ketones, including functionalized ones, and different aromatic aldehydes (Table 3). In some cases, the addition of a small amount of H₂O was required to give the best results (up to 95% ee). Under these reaction conditions, the cross‐aldol reaction between aldehydes proceeded in moderate yield and diastereo‐ and enantioselectivity (Scheme 2).     

Copper‐Complex‐Catalyzed Asymmetric Aerobic Oxidative Cross‐Coupling of 2‐Naphthols: Enantioselective Synthesis of 3,3′‐Substituted C1‐Symmetric BINOLs

A novel chiral 1,5‐N,N‐bidentate ligand based on a spirocyclic pyrrolidine oxazoline backbone was designed and prepared, and it coordinates CuBr in situ to form an unprecedented catalyst that enables efficient oxidative cross‐coupling of 2‐naphthols. Air serves as an external oxidant and generates a series of C₁‐symmetric chiral BINOL derivatives with high enantioselectivity (up to 99 % ee) and good yield (up to 87 %). This approach is tolerant of a broader substrates scope, particularly substrates bearing various 3‐ and 3′‐substituents. A preliminary investigation using one of the obtained C₁‐symmetric BINOL products was used as an organocatalyst, exhibiting better enantioselectivity than the previously reported organocatalyst, for the asymmetric α‐alkylation of amino esters.     

N,N′‐Dioxide/Nickel(II)‐Catalyzed Asymmetric Inverse‐Electron‐Demand Hetero‐Diels–Alder Reaction of β,γ‐Unsaturated α‐Ketoesters with Enecarbamates

N,N′‐Dioxide/nickel(II) complexes have been developed to catalyze the inverse‐electron‐demand hetero‐Diels–Alder reaction of β,γ‐unsaturated α‐ketoesters with acyclic enecarbamates. After detailed screening of the reaction parameters, mild optimized reaction conditions were established, affording 3,4‐dihydro‐2H‐pyranamines in up to 99 % yield, 99 % ee and more than 95:5 d.r. The catalytic system was also efficient for β‐substituted acyclic enecarbamates, affording more challenging 2,3,4‐trisubstituted 3,4‐dihydro‐2H‐pyranamine with three contiguous stereogenic centers in excellent yields, diastereoselectivities, and enantioselectivities. The reaction could be scaled up to a gram scale with no deterioration of either enantioselectivity or yield. Based on these experiments and on previous reports, a possible transition state was proposed.     

Synthesis and properties of ortho‐linked aromatic polyimides based on 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene

A bis(ether amine) containing the ortho‐substituted phenylene unit and pendant tert‐butyl group, 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene, was synthesized and used as a monomer to prepare polyimides with six commercial dianhydrides via a conventional two‐stage procedure. The intermediate poly(amic acid)s had inherent viscosities of 0.78–1.44 dL/g, and most of them could be thermally converted into transparent, flexible, and tough polyimide films. The inherent viscosities of the resulting polyimides were in the range of 0.46–0.87 dL/g. All polyimides were noncrystalline, and most of them showed excellent solubility in polar organic solvents. The glass‐transition temperatures of these polyimides were in the range of 222–259 °C in differential scanning calorimetry and 212–282 °C in thermomechanicl analysis. These polyimides showed no appreciable decomposition up to 500 °C in thermogravimetric analysis in air or nitrogen. A comparative study of the properties with the corresponding polyimides without pendant tert‐butyl groups derived from 1,2‐bis(4‐aminophenoxy)benzene is also presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1551–1559, 2000     

Synthesis and X‐ray single‐crystal structure study of 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes

A high‐yield synthesis toward 5,5′‐bis(silyl)‐functionalized 3,3′‐dibromo‐2,2′‐dithiophenes with very efficient work‐up procedure is presented. The molecular structures of two silyl functionalized dibromo‐dithiophenes in the solid state have been determined to investigate the structural influences of different functional groups on the degree of π‐conjugation within the dithiophene moieties, as well as their packing properties. The planar alignment of the tert‐butyldimethylsilyl‐functionalized dibromo‐dithiophene shows a significantly higher degree of conjugation of the π‐system with a more favorable molecular packing than the skewed arrangement of the triisopropylsilyl‐substituted species. Copyright © 2005 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Cyclodextrins in Polymer Synthesis: Enzymatic Polymerization of a 2,6‐Dimethyl‐β‐Cyclodextrin/2,4‐Dihydroxyphenyl‐4′‐Hydroxybenzylketone Host‐Guest Complex Catalyzed by Horseradish Peroxidase (HRP)

This paper reports the enzymatic polymerization of the inclusion complex 2,4‐dihydroxyphenyl‐4′‐hydroxybenzylketone/2,6‐dimethyl‐β‐cyclodextrin by horseradish peroxidase (HRP) in aqueous media. The structure of the complex was determined by means of NOESY‐NMR and crystallographic analysis (indicating an orthorhombic structure). The enzymatic polymerization of the uncomplexed 2,4‐dihydroxyphenyl‐4′‐hydroxybenzylketone yields oligomers with molecular weights up to in organic‐aqueous media, but because of its poor solubility in aqueous systems, no polymerization is observed if water is used as solvent. An increase of the availability of the ketone in solution is achieved by complexing it with random‐methylated β‐cyclodextrin in water. We found that the use of methylated β‐cyclodextrin in equimolar concentration to the monomer increases the polymerization yield and the average molecular weight. The polymers formed were analyzed by GPC and ATR‐FTIR techniques.

Representation from X‐ray diffraction analysis of the 2,6‐dimethyl‐β‐cyclodextrin/2,4‐dihydroxyphenyl‐4′‐hydroxybenzylketone host‐guest complex ( 3 ).     

Efficient blue‐green‐emitting poly[(5‐diphenylamino‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] derivatives: Synthesis and optical properties

New poly(phenylene vinylene) derivatives with a 5‐diphenylamino‐1,3‐phenylene linkage (including polymers 2 , 3 , and 5 ) have been synthesized to improve the charge‐injection properties. These polymers are highly photoluminescent with fluorescent quantum yields as high as 76% in tetrahydrofuran solutions. With effective π‐conjugation interruption at adjacent m‐phenylene units, chromophores of different conjugation lengths can be incorporated into the polymer chain in a controllable manner. In polymer 2 , the structural regularity leads to an isolated, well‐defined emitting chromophore. Isomeric polymer 3 of a random chain sequence, however, allows the effective emitting chromophores to be joined in sequence by sharing a common m‐phenylene linkage (as shown in a molecular fragment). Double‐layer light‐emitting‐diode devices using 2 , 3 , and 5 as emitting layers have turn‐on voltages of about 3.5 V and produce blue‐green emissions with peaks at 493, 492, and 482 nm and external quantum efficiencies up to 1.42, 0.98, and 1.53%, respectively. In comparison with a light‐emitting diode using 2 , a device using 3 shows improved charge injection and displays increased brightness by a factor of ～3 to 1400 cd/m² at an 8‐V bias. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2307–2315, 2006     

Copper(I)‐Catalyzed Asymmetric [3+2]‐Cycloaddition of α‐Substituted Iminoesters with α‐Trifluoromethyl α,β‐Unsaturated Esters

Reported herein is an example of highly regio‐, diastereo‐ and enantioselective Cu(I)‐catalyzed intermolecular [3+2] cycloaddition reaction of α‐substituted iminoesters with α‐trifluoromethyl α,β‐unsaturated esters. This novel strategy provided a facile access to pyrrolidines with two skipped (aza)quaternary stereocenters including a CF₃ all‐carbon quaternary stereocenter. A broad substrate scope was observed and high yields (up to 94%) with excellent diastereoselectivity (up to >20 : 1 d.r.) and enantioselectivity (up to 98% ee) were obtained.