The gas‐phase elimination kinetics of ethyl 2‐furoate and ethyl 2‐thiophenecarboxylate

The gas‐phase elimination kinetics of ethyl 2‐furoate and 2‐ethyl 2‐thiophenecarboxylate was carried out in a static reaction system over the temperature range of 623.15–683.15 K (350–410°C) and pressure range of 30–113 Torr. The reactions proved to be homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are expressed by the following Arrhenius equations: ethyl 2‐furoate, log k₁ (s^?1) = (11.51 ± 0.17)–(185.6 ± 2.2) kJ mol^?1 (2.303 RT)^?1; ethyl 2‐thiophenecarboxylate, log k₁ (s^?1) = (11.59 ± 0.19)–(183.8 ± 2.4) kJ mol^?1 (2.303 RT)^?1. The elimination products are ethylene and the corresponding heteroaromatic 2‐carboxylic acid. However, as the reaction temperature increases, the intermediate heteroaromatic carboxylic acid products slowly decarboxylate to give the corresponding heteroaromatic furan and thiophene, respectively. The mechanisms of these reactions are suggested and described. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 145–152, 2009     

Benzotriazole‐Containing D–π–A Conjugated Organic Dyes for Dye‐Sensitized Solar Cells

A series of metal‐free benzotriazole‐based dipolar dyes have been developed as sensitizers for dye‐sensitized solar cells (DSSCs). Different heteroaromatic rings such as furan, thiophene, and selenophene, were used in combination with benzotriazole as the conjugated spacer group. Light harvesting, charge recombination, and electron injection of the cells fabricated are affected by the heteroaromatic ring used in the spacer. The DSSC with the thiophene‐containing dye has the highest conversion efficiency of 6.20 %, which reaches 85 % of the standard cell based on N719.     

Dibenzo[b,f]oxepin‐10(11H)‐one and dibenzo[b,f]thiepin‐10(11H)‐one as useful synthons in the synthesis of various dibenzo[e,h]azulenes

The present review focuses on dibenzo[b,f]oxepin‐10(11H)‐one ( I , X = O) and dibenzo[b,f]thiepin‐10(11H)‐one ( I , X = S) as common synthons in the efficient synthesis of various dibenzoxepino[4,5‐ and dibenzothiepino[4,5]‐fused five‐membered heterocycles: [2,3] fused thiophene ( II ), [3,4] fused thiophene ( III ), furan ( IV ), pyrrole ( V ), imidazole ( VI ), pyrazole ( VII ), oxazole ( VIII ), and thiazole ( IX ). The potential of I to be converted into reactive intermediates that readily undergo heteroaromatic annulation reactions by cyclocondensation with proper binucleophiles allows formation of a range of enumerated functionalized dibenzo[e,h]azulene [4] structures ( II , III , IV , V , VI , VII , VIII , IX ). Dibenzo[e,h]azulenes as heterotetracyclic scaffold can be exploited in further modifications to obtain compounds with altered physicochemical and biological profile. J. Heterocyclic Chem., (2012).     

Synthesis,Properties, and π‐Dimer Formation of Oligothiophenes Partially Bearing Orthogonally Fused Fluorene Units

A series of oligothiophenes that incorporate cyclopenta[c]thiophene‐based units bearing spiro‐substituted dialkylfluorene was synthesized. Photophysical measurements indicated that there was no interruption in the conjugation along the oligothiophene backbones, irrespective of the number or position of this unit. Electrochemical measurements showed that the thiophene 7‐mers and 11‐mer exhibit reversible multi‐oxidation waves. The formation of cationic species was clearly observed from UV/Vis/NIR measurements. Furthermore, the UV/Vis/NIR spectra at 223 K under one‐electron oxidation conditions revealed that the unsubstituted thiophene or bithiophene units remained in the absence of intermolecular π–π interactions, whereas the formation of π‐dimeric species was observed for the thiophene 7‐mer containing an unsubstituted terthiophene ( U₃ ) unit. Theoretical calculations indicated that the combination of the U₃ unit and the all‐trans conformation decreased the intermolecular steric repulsion between the fused cyclopentene ring and its facing thiophene, which may contribute to the formation of the dimeric structure.     

Thieno–Pyrrole‐Fused BODIPY Intermediate as a Platform to Multifunctional NIR Agents

We report the synthesis, photophysical and electrochemical properties, and in vivo fluorescence imaging of a series of new thieno–pyrrole‐fused near‐infrared (NIR) BODIPY agents by using a versatile intermediate as a building block. The versatile thieno–pyrrole‐fused BODIPY intermediate was rationally designed to bear bromo‐substituents and absorb in the mid‐red region (635 nm) to act as an organic electrophile for the development of NIR multifunctional agents. The use of subsequent palladium‐catalyzed and nucleophilic substitution reactions afforded highly conjugated NIR BODIPYs. The novel BODIPYs exhibit long‐wavelength absorptions in the NIR region (650–840 nm). The agents produce sharp fluorescence bands, and most of them display respectable quantum yields of fluorescence (0.05–0.87) useful for biomedical imaging, as demonstrated by in vivo imaging with SBDPiR740 . Interestingly, a number of agents in the series that are non‐halogenated were reactive to O₂ at the triplet photo‐excited state coupled with a favorable redox potential and decent fluorescence, and hence could be potential candidates for use as photosensitizers in fluorescence‐guided photodynamic therapy. Furthermore, the synthetic approach allows further functionalization of the highly conjugated NIR BODIPYs to tune the excited states (PET, ICT) and to conjugate targeting moieties for enhanced biological applications.     

Donor–acceptor‐integrated conjugated polymers based on carbazole[3,4‐c:5,6‐c]bis[1,2,5]thiadiazole with tight π–π stacking for photovoltaics

An original strategy to construct a new donor–acceptor (D–A)‐integrated structure by directly imposing “pull” unit on the “push” moiety to form fused ring architecture has been developed, and poly{N‐alkyl‐carbazole[3,4‐c:5,6‐c]bis[1,2,5]thiadiazole‐alt‐thiophene} (PCBTT) with D–A‐integrated structure, in which two 1,2,5‐thiadiazole rings are fixed on carbazole in 3‐, 4‐ and 5‐, 6‐position symmetrically and thiophene is used as bridge, has been synthesized. The interaction between pull and push units has fine tuned the HOMO/LUMO energy levels, and the resulting copolymer covers the solar flux from 300 to 750 nm. The interaction between pull and push units is worth noting that due to the fused five rings inducing strong intermolecular interaction, an extremely short π–π stacking distance of 0.32 nm has been achieved for PCBTT both in powder and solid states. This is the shortest π–π stacking distance reported for conjugated polymers. Additionally, an obvious intramolecular charge transfer and energy transfer from donor units to acceptor units have been detected in this D–A integration. A moderate‐to‐high open‐circuit voltage of ～0.7 V in PCBTT:[6,6]‐phenyl‐C61 butyric acid methyl ester (PCBM) (w/w = 1/2) solar cells is achieved due to the low‐lying HOMO energy level of PCBTT. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Far‐Red/Near‐Infrared Emissive (1,3‐Dimethyl)barbituric Acid‐Based AIEgens for High‐Contrast Detection of Metastatic Tumors in the Lung

Despite of the enthusiastic research in aggregation‐induced emission luminogens (AIEgens) in recent years, the ones that can be smoothly used for sophisticated biomedical applications such as in vivo bioimaging of pulmonary metastatic tumors during surgery are still limited. Herein, we report the design and synthesis of a new series of far‐red/near‐infrared (FR/NIR) fluorescent AIEgens that consist of methoxy‐substituted tetraphenylethene (TPE) as the electron‐donating moiety, (1,3‐dimethyl)barbituric acid as the electron‐withdrawing moiety, and different π‐bridge units. As compared to benzene or 3,4‐ethylenedioxythiophene, using thiophene as the π‐conjugation unit between the donor and acceptor results in a relatively higher absolute fluorescence quantum yield (14.5 %) in water when formulating the corresponding AIEgens into nanoparticles (AIE dots) with an amphiphilic co‐polymer as the doping matrix. The highly FR/NIR‐emissive thiophene‐based AIE dots are demonstrated to be potent for intraoperative detection of pulmonary metastatic tumors, particularly the micro‐sized ones, with excellent signal‐to‐background ratio.     

Phosphorylation of 2‐(3‐methyl‐1,3‐diazabuten‐1‐yl)‐3‐ethoxycarbonylthiophenes with phosphorus(III) halides

2‐(3‐Methyl‐1,3‐diazabuten‐1‐yl)‐3‐ethoxycarbonylthiophenes are phosphorylated with phosphorus(III) halides in basic media at position 5 of the thiophene ring. Up to three heteroaromatic substituents can be introduced one by one at the same phosphorus atom. On this basis, mono‐, bis‐, and trishetaryl substituted P(III) and P(V) derivatives have been obtained. Phosphorylated 2‐(N,N‐dimethylformamidino)‐3‐ethoxycarbonylthiophenes provide a synthetic access to phosphorylated thienopyrimidines. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:641–651, 2001     

Reaction of 2‐amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo‐[b]thiophene with ethyl acetoacetate: Novel syntheses of pyridines,pyrazoles, and their fused derivatives

The reaction of 2‐amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo[b]thiophene 1 with ethyl acetoacetate 2 gave compound 3 . The reactivity of the latter product toward a variety of chemical reagents was studied to give fused thiophene derivatives of potential pharmaceutical interest. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:518–527, 2001     

The reaction of 2‐amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo[b]‐thiophene with diethyl malonate: synthesis of coumarin,pyridine, and thiazole derivatives

The reaction of 2‐amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo[b]thiophene ( 1 ) with diethyl malonate ( 2 ) gave two products: 3 and 4 . The reactivity of 3 toward a variety of chemical reagents was studied to give azoles, azines, and their fused derivatives. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:168–175, 2001     

Synthesis and Spectroscopic Properties of Fused‐Ring‐Expanded Aza‐Boradiazaindacenes

A series of fused‐ring‐expanded aza‐boradiazaindacene (aza‐BODIPY) dyes have been synthesized by reacting arylmagnesium bromides with phthalonitriles or naphthalenedicarbonitriles. An analysis of the structure–property relationships has been carried out based on X‐ray crystallography, optical spectroscopy, and theoretical calculations. Benzo and 1,2‐naphtho‐fused 3,5‐diaryl aza‐BODIPY dyes display markedly red shifted absorption and emission bands in the near‐IR region (>700 nm) due to changes in the energies of the frontier MOs relative to those of 1,3,5,7‐tetraaryl aza‐BODIPYs. Only one 1,2‐naphtho‐fused aza‐BODIPY of the three possible isomers is formed due to steric effects, and 2,3‐naphtho‐fused compounds could not be characterized because the final BF₂ complexes are unstable in solution. The incorporation of a  N(CH₃)₂ group at the para‐positions of a benzo‐fused 3,5‐diaryl aza‐BODIPY quenches the fluorescence in polar solvents and results in a ratiometric pH response, which could be used in future practical applications as an NIR “turn‐on” fluorescence sensor.     

Ruthenocene‐Type Complexes of N‐Fused Porphyrins

Ruthenocene‐type hybrid complexes with N‐fused porphyrinato ligands, [Ru(NFp)Cp] (NFp=N‐fused porphyrin, Cp=cyclopentadienyl), have been prepared and characterized by NMR and UV/Vis/NIR spectroscopy, cyclovoltammetry, and X‐ray crystallography. [Ru(NFp)Cp] is a common low‐spin ruthenium(II) complex and shows strong aromaticity. The Ru–Cp distance (1.833 Å) in [Ru(NFp)Cp] is comparable to that in [RuCp₂] (1.840 Å). DFT calculations on [Ru(NFp)Cp] showed the unequivocal contribution of the RuCp moiety as well as the NFp moiety to both the HOMO and LUMO, constructing a three‐dimensional d–π conjugated system. The HOMO–LUMO gaps of [Ru(NFp)Cp] are insensitive to the substituents on the NFp ligand, which is illustrated spectroscopically as well as theoretically. This is in sharp contrast to the ligand precursor, the N‐fused porphyrin, in which the HOMO–LUMO gap is affected by substituents in a similar manner to standard porphyrins and related macrocycles.     

Light‐Harvesting Ytterbium(III)–Porphyrinate–BODIPY Conjugates: Synthesis,Excitation‐Energy Transfer,and Two‐Photon‐Induced Near‐Infrared‐Emission Studies

Based on a donor–acceptor framework, several conjugates have been designed and prepared in which an electron‐donor moiety, ytterbium(III) porphyrinate (YbPor), was linked through an ethynyl bridge to an electron‐acceptor moiety, boron dipyrromethene (BODIPY). Photoluminescence studies demonstrated efficient energy transfer from the BODIPY moiety to the YbPor counterpart. When conjugated with the YbPor moiety, the BODIPY moiety served as an antenna to harvest the lower‐energy visible light, subsequently transferring its energy to the YbPor counterpart, and, consequently, sensitizing the Yb^III emission in the near‐infrared (NIR) region with a quantum efficiency of up to 0.73 % and a lifetime of around 40 μs. Moreover, these conjugates exhibited large two‐photon‐absorption cross‐sections that ranged from 1048–2226 GM and strong two‐photon‐induced NIR emission.     

Formation of regioregular head‐to‐tail poly[3‐(4‐butylphenyl)thiophene] by an oxidative coupling polymerization with vanadium acetylacetonate

The mechanism for the formation of head‐to‐tail (H–T) poly[3‐(4‐butylphenyl)thiophene] by oxidative coupling polymerization with a catalytic amount of vanadium acetylacetonate was investigated. Polymerization was carried out in the presence of vanadium acetylacetonate, trifluoromethane sulfonic acid, and trifluoroacetic anhydride under an oxygen atmosphere in 1,2‐dichloroethane at room temperature. Polymers and oligomers obtained after several polymerization times were characterized by gel permeation chromatography, IR, and NMR spectroscopies. With these findings and the reactivity of monomer and dimers based on ab initio density functional theory, the polymerization was found to proceed mainly through the formation of H–T linkages due to the high spin density at the 2‐position of 3‐(4‐butylphenyl)thiophene and the calculated total energy of dimers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2287–2295, 2001     

Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Gold‐Catalyzed Cyclization of Diynes: Controlling the Mode of 5‐endo versus 6‐endo Cyclization—An Experimental and Theoretical Study by Utilizing Diethynylthiophenes

Herein, a dual‐gold catalyzed cyclization of 3,4‐diethynylthiophenes generating pentaleno[c]thiophenes through gold–vinylidenes and C?H bond activation is disclosed. Various new heteroaromatic compounds—substrate classes unexplored to date—exhibiting three five‐membered annulated ring systems could be synthesized in moderate to high yields. By comparison of the solid‐state structures of the corresponding gold–acetylides, it could be demonstrated that the cyclization mode (5‐endo versus 6‐endo) is controlled by the electronic and not steric nature of the diyne backbone. Depending on different backbones, we calculated thermodynamic stabilities and full potential‐energy surfaces giving insight into the crucial dual‐activation cyclization step. In the case of the 3,4‐thiophene backbone, in which the initial cyclization is rate and selectivity determining, two energetically distinct transition states could be localized explaining the observed 5‐endo cyclization mode by classical transition‐state theory. In the case of vinyl and 2,3‐thiophene backbones, the theoretical analysis of the cyclization mode in the bifurcated cyclization area demonstrated that classical transition‐state theory is no longer valid to explain the high experimentally observed selectivity. Herein, for the first time, the influence of the backbone and the aromatic stabilization effect of the 6‐endo product in the crucial cyclization step could be visualized and quantified by calculating and comparing the full potential‐energy surfaces.     

1‐Alkyl‐1H‐imidazole‐Based Dipolar Organic Compounds for Dye‐Sensitized Solar Cells

A series of donor–π–acceptor‐type organic dyes based on 1‐alkyl‐1H‐imidazole spacers 1 , 2 , 3 , 4 , 5 have been developed and characterized. The two electron donors are at positions 4 and 5 of the imidazole, while the electron‐accepting cyanoacrylic acid is incorporated at position 2 by a spacer‐containing heteroaromatic rings, such as thiophene and thiazole. Detailed investigation on the relationship between the structure, spectral and electrochemical properties, and performance of DSSC is described here. Dye‐sensitized solar cells (DSSCs) using dyes as the sensitizers exhibit good efficiencies, ranging from 3.06 to 6.35 %, which reached 42–87 % with respect to that of N719‐based device (7.33 %) fabricated and measured under similar conditions. Time‐dependent density functional theory (TDDFT) calculations have been performed on the dyes, and the results show that both electron donors can contribute to electron injection upon photo‐excitation, either directly or indirectly by internal conversion to the lowest excited state.     

Light‐Regulated Polymerization under Near‐Infrared/Far‐Red Irradiation Catalyzed by Bacteriochlorophyll a

Photoregulated polymerizations are typically conducted using high‐energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near‐infrared (NIR) and far‐red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition–fragmentation chain transfer (PET‐RAFT) polymerization. Well‐defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far‐red (λ=780 nm) irradiation with excellent control over the molecular weight (M_n/M_w<1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.     

Thiophene–phenylene/naphthalene‐based step‐ladder copolymers

A series of step‐ladder copolymers based on thiophene–phenylene–thiophene SL1 ‐ SL3 and thiophene–naphthylene–thiophene SL4 repeat units with varying lengths of the oligothiophene segment has been designed and synthesized via a microwave‐assisted Stille‐type cross‐coupling reaction followed by a polymer‐analogous cyclization reaction. The optical properties of the step‐ladder copolymers have been investigated in detail, in particular at low temperature and in the solid‐state. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7342–7353, 2008     

Application of two‐dimensional near‐infrared (2D‐NIR) correlation spectroscopy to the discrimination of three species of Dendrobium

The objective of this paper was to apply two‐dimensional (2D) near‐infrared (NIR) correlation spectroscopy to the discrimination of three species of Dendrobium. Generalized 2D‐NIR correlation spectroscopy was able to enhance spectral resolution, simplify the spectrum with overlapped bands and provide information about temperature‐induced spectral intensity variations that was hard to obtain from one‐dimensional NIR spectroscopy. The FT‐NIR spectra were measured over a temperature range of 30–140°C. The 2D synchronous and asynchronous spectra showed remarkable differences within the range of 5600–4750 cm⁻¹ between different species of Dendrobium. Copyright © 2009 John Wiley & Sons, Ltd.