The dramatic effect of NH3 co-ligation on the Fe+-assisted activation of carbon dioxide in the gas phase: from bare metal ions to complexes

The catalytic efficiency of Fe(+) ion over the CO(2) decomposition in the gas phase has been extensively investigated with the help of electronic structure calculation methods. Potential-energy profiles for the activation process Fe(+) + CO(2) --> CO + FeO(+) along two rival potential reaction paths, namely the insertion and addition pathways, originating from the end-on kappa(1)-O and kappa(2)-O,O coordination modes of CO(2) with the metal ion, respectively, have been explored by DFT calculations. For each pathway the potential energy surfaces of the high-spin sextet (S = 5/2) and the intermediate-spin quartet (S = 3/2) spin-states have been explored. The complete energy reaction profile calculated by a combination of ab initio and density functional theory (DFT) computational techniques reveals a two-state reactivity, involving two spin inversions, for the decomposition process and accounts well for the experimentally observed inertness of bare Fe(+) ions towards CO(2) activation. Furthermore, the coordination of up to three extra ancillary NH(3) ligands with the Fe(+) metal ion has been explored and the geometric and energetic reaction profiles of the CO(2) activation processes Fe(+) + n x NH(3) + CO(2) --> [Fe(NH(3))(n)(CO(2))](+) --> [Fe(NH(3))(n)(O)(CO)](+) --> CO + [Fe(O)(NH(3))(n)](+) (n = 1, 2 or 3) have thoroughly been scrutinized for both the insertion and the addition mechanisms. Inter alia, the geometries and energies of the various states of the [Fe(NH(3))(n)(CO(2))](+) and [Fe(NH(3))(n)(O)(CO)](+) complexes are explored and compared. Finally, a detailed analysis of the coordination modes of CO(2) in the cationic [Fe(NH(3))(n)(CO(2))](+) (n = 0, 1, 2 and 3) complexes is presented.     

Calcium-amidoborane-ammine complexes: thermal decomposition of model systems

Hydrocarbon-soluble model systems for the calcium-amidoborane-ammine complex Ca(NH(2)BH(3))(2)?(NH(3))(2) were prepared and structurally characterized. The following complexes were obtained by the reaction of RNH(2)BH(3) (R = H, Me, iPr, DIPP; DIPP = 2,6-diisopropylphenyl) with Ca(DIPP-nacnac)(NH(2))?(NH(3))(2) (DIPP-nacnac = DIPP-NC(Me)CHC(Me)N-DIPP): Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(2), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(3), Ca(DIPP-nacnac)[NH(Me)BH(3)]?(NH(3))(2), Ca(DIPP-nacnac)[NH(iPr)BH(3)]?(NH(3))(2), and Ca(DIPP-nacnac)[NH(DIPP)BH(3)]?NH(3). The crystal structure of Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3)(3) showed a NH(2)BH(3)(-) unit that was fully embedded in a network of BH???HN interactions (range: 1.97(4)-2.39(4)??) that were mainly found between NH(3) ligands and BH(3) groups. In addition, there were N-H???C interactions between NH(3) ligands and the central carbon atom in the ligand. Solutions of these calcium-amidoborane-ammine complexes in benzene were heated stepwise to 60?°C and thermally decomposed. The following main conclusions can be drawn: 1)?Competing protonation of the DIPP-nacnac anion by NH(3) was observed; 2)?The NH(3) ligands were bound loosely to the Ca(2+) ions and were partially eliminated upon heating. Crystal structures of [Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))](∞), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))?(THF), and [Ca(DIPP-nacnac){NH(iPr)BH(3)}](2) were obtained. 3)?Independent of the nature of the substituent R in NH(R)BH(3), the formation of H(2) was observed at around 50?°C. 4)?In all cases, the complex [Ca(DIPP-nacnac)(NH(2))](2) was formed as a major product of thermal decomposition, and its dimeric nature was confirmed by single-crystal analysis. We proposed that thermal decomposition of calcium-amidoborane-ammine complexes goes through an intermediate calcium-hydride-ammine complex which eliminates hydrogen and [Ca(DIPP-nacnac)(NH(2))](2). It is likely that the formation of metal amides is also an important reaction pathway for the decomposition of metal-amidoborane-ammine complexes in the solid state.     

Stoichiometric reactivity of dialkylamine boranes with alkaline earth silylamides

Reactions of β-diketiminato group 2 silylamides, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)M(THF)(n){N(SiMe(3))(2)}] (M = Mg, n = 0; M = Ca, Sr, n = 1), and an equimolar quantity of pyrrolidine borane, (CH(2))(4)NH·BH(3), were found to produce amidoborane derivatives of the form [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)MN(CH(2))(4)·BH(3)]. In reactivity reminiscent of analogous reactions performed with dimethylamine borane, addition of a second equivalent of (CH(2))(4)NH·BH(3) to the Mg derivative induced the formation of a species, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg{N(CH(2))(4) BH(2)NMe(2)BH(3)}], containing an anion in which two molecules of the amine borane substrate have been coupled together through the elimination of one molecule of H(2). Both this species and a calcium amidoborane derivative have been characterised by X-ray diffraction techniques and the coupled species is proposed as a key intermediate in catalytic amine borane dehydrocoupling, in reactivity dictated by the charge density of the group 2 centre involved. On the basis of further stoichiometric reactions of the homoleptic group 2 silylamides, [M{N(SiMe(3))(2)}(2)] (M = Mg, Ca, Sr, Ba), with (CH(3))(2)NH·BH(3) and (i)Pr(2)NH·BH(3) reactivity consistent with successive amidoborane β-hydride elimination and [R(2)N[double bond, length as m-dash]BH(2)] insertion is described as a means to induce the B-N dehydrocoupling between amine borane substrates.     

Role of NH3 in the dehydrogenation of calcium amidoborane ammoniate and magnesium amidoborane ammoniate: a first-principles study

First-principles calculations show that [NH(3)] molecules play crucial roles as both activator for the break-up of B-H bond and supplier of protic H for the establishment of dihydrogen bonding, which could facilitate the dehydrogenation of Ca(NH(2)BH(3))(2)·2NH(3) or Mg(NH(2)BH(3))(2)·NH(3) occurring at lower temperatures compared to those of Ca(NH(2)BH(3))(2) and Mg(NH(2)BH(3))(2). Moreover, the calculations of Helmholtz Free energy and [NH(3)] molecule removal energy evidence that coordination between [NH(3)] and Mg cation is stronger than that between [NH(3)] and Ca cation; therefore, Mg(NH(2)BH(3))(2)·NH(3) will undergo directly dehydrogenation rather than deammoniation at lower temperatures.     

Theoretical study of rhodium(III)-catalyzed hydrogenation of carbon dioxide into formic acid. Significant differences in reactivity among rhodium(III), rhodium(I), and ruthenium(II) complexes

The title reaction was theoretically investigated, where cis-[RhH(2)(PH(3))(3)](+) and cis-[RhH(2)(PH(3))(2)(H(2)O)](+) were adopted as models of the catalyst. The first step of the catalytic cycle is the CO(2) insertion into the Rh(III)-H bond, of which the activation barrier (E(a)) is 47.2 and 28.4 kcal/mol in cis-[RhH(2)(PH(3))(3)](+) and cis-[RhH(2)(PH(3))(2)(H(2)O)](+), respectively, where DFT(B3LYP)-calculated E(a) values (kcal/mol unit) are given hereafter. These results indicate that an active species is not cis-[RhH(2)(PH(3))(3)](+) but cis-[RhH(2)(PH(3))(2)(H(2)O)](+). After the CO(2) insertion, two reaction courses are possible. In one course, the reaction proceeds through isomerization (E(a) = 2.8) of [RhH(eta(1)- OCOH)(PH(3))(2)(H(2)O)(2)](+), five-centered H-OCOH reductive elimination (E(a) = 2.7), and oxidative addition of H(2) to [Rh(PH(3))(2)(H(2)O)(2)](+) (E(a) = 5.8). In the other one, the reaction proceeds through isomerization of [RhH(eta(1)-OCOH)(PH(3))(2)(H(2)O)(H(2))](+) (E(a) = 5.9) and six-centered sigma-bond metathesis of [RhH(eta(1)-OCOH)(PH(3))(2)(H(2)O)](+) with H(2) (no barrier). RhH(PH(3))(2)-catalyzed hydrogenation of CO(2) proceeds through CO(2) insertion (E(a) = 1.6) and either the isomerization of Rh(eta(1)-OCOH)(PH(3))(2)(H(2)) (E(a) = 6.1) followed by the six-centered sigma-bond metathesis (E(a) = 0.3) or H(2) oxidative addition to Rh(eta(1)-OCOH)(PH(3))(2) (E(a) = 7.3) followed by isomerization of RhH(2)(eta(1)-OCOH)(PH(3))(2) (E(a) = 6.2) and the five-centered H-OCOH reductive elimination (E(a) = 1.9). From these results and our previous results of RuH(2)(PH(3))(4)-catalyzed hydrogenation of CO(2) (J. Am. Chem. Soc. 2000, 122, 3867), detailed discussion is presented concerning differences among Rh(III), Rh(I), and Ru(II) complexes.     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Experimental and computational study of the formation mechanism of the diammoniate of diborane: the role of dihydrogen bonds

The mechanism of formation of ammonia borane (NH(3)BH(3), AB) and the diammoniate of diborane ([H(2)B(NH(3))(2)][BH(4)], DADB) in the reaction between NH(3) and THF·BH(3) was explored experimentally and computationally. Ammonia diborane (NH(3)BH(2)(μ-H)BH(3), AaDB), a long-sought intermediate proposed for the formation of DADB, was directly observed in the reaction using (11)B NMR spectroscopy. The results indicate that dihydrogen bonds between the initially formed AB and AaDB accelerate the formation of DADB in competition with the formation of AB.     

Theoretical study of the reaction mechanism of HCN+ and CH4 of relevance to Titan's ion chemistry

Titan is the largest satellite of Saturn. In its atmosphere, CH4 is the most abundant neutral after nitrogen. In this paper, the complex doublet potential-energy surface related to the reaction between HCN+ and CH4 is investigated at the B3LYP/6-311G(d,p), CCSD(T)/6-311G++(3df,2pd)(single-point), and QCISD/6-311G(d,p) computational levels. A total of seven products are located on the PES. The initial association of HCN+ with CH4 is found to be a prereaction complex 1 (HCNHCH3(+)) without barrier. Starting from 1, the most feasible pathway is the direct H-abstraction process (the internal C-H bond dissociation) leading to the product P1 (HCNH++CH3). By C-C addition, prereaction complex 1 can form intermediate 2 (HNCHCH3(+)) and then lead to the product P2 (CH3CNH++H). The rate-controlling step of this process is only 25.6 kcal/mol. It makes the Path P2 (1) R --> 1 --> TS1/2 --> 2 --> TS2/P2 --> P2 another possible way for the reaction. P3 (HCNCH3(+) + H), P5 (cNCHCH2(+) + H2), and P6 (NCCH3(+) + H2) are exothermic products, but they have higher barriers (more than 40.0 kcal/mol); P4 (H + HCN + CH3(+)) and P7 (H + H2 + HCCNH+) are endothermic products. They should be discovered under different experimental or interstellar conditions. The present study may be helpful for investigating the analogous ion-molecule reaction in Titan's atmosphere.     

Theoretical study on the reaction mechanism of the gas-phase H2/CO2/Ni(3D) system

The ground-state potential energy surface (PES) in the gas-phase H2/CO2/Ni(3D) system is investigated at the CCSD(T)//B3LYP/6-311+G(2d,2p) levels in order to explore the possible reaction mechanism of the reverse water gas shift reaction catalyzed by Ni(3D). The calculations predict that the C-O bond cleavage of CO2 assisted by co-interacted H2 is prior to the dissociation of the H2, and the most feasible reaction path for Ni(3D) + H2 + CO2 --> Ni(3D) + H2O + CO is endothermic by 12.5 kJ mol(-1) with an energy barrier of 103.9 kJ mol(-1). The rate-determining step for the overall reaction is predicted to be the hydrogen migration with water formation. The promotion effect of H2 on the cleavage of C-O bond in CO2 is also discussed and compared with the analogous reaction of Ni(3D) + CO2 --> NiO + CO, and the difference between triplet and singlet H2/CO2/Ni systems is also discussed.     

Lewis base stabilized phosphanylborane

The abstraction of the Lewis acid from [W(CO)(5)(PH(2)BH(2)NMe(3))] (1) by an excess of P(OMe(3))(3) leads to the quantitative formation of the first Lewis base stabilized monomeric parent compound of phosphanylborane [H(2)PBH(2)NMe(3)] 2. Density functional theory (DFT) calculations have shown a low energetic difference between the crystallographically determined antiperiplanar arrangement of the lone pair and the trimethylamine group relative to the P-B core and the synperiplanar conformation. Subsequent reactions with the main-group Lewis acid BH(3) as well as with an [Fe(CO)(4)] unit as a transition-metal Lewis acid led to the formation of [(BH(3))PH(2)BH(2)NMe(3)] (3), containing a central H(3)B-PH(2)-BH(2) unit, and [Fe(CO)(4)(PH(2)BH(2)NMe(3))] (4), respectively. In oxidation processes with O(2), Me(3)NO, elemental sulfur, and selenium, the boranylphosphine chalcogenides [H(2)P(Q)BH(2)NMe(3)] (Q = S 5 b; Se 5 c) as well as the novel boranyl phosphonic acid [(HO)(2)P(O)BH(2)NMe(3)] (6 a) are formed. All products have been characterized by spectroscopic as well as by single-crystal X-ray structure analysis.     

Synthetic and mechanistic studies of metal-free transfer hydrogenations applying polarized olefins as hydrogen acceptors and amine borane adducts as hydrogen donors

Metal-free transfer hydrogenation of polarized olefins (RR'C=CEE': R, R' = H or organyl, E, E' = CN or CO(2)Me) using amine borane adducts RR'NH-BH(3) (R = R' = H, AB; R = Me, R' = H, MAB; R = (t)Bu, R' = H, tBAB; R = R' = Me, DMAB) as hydrogen donors, were studied by means of in situ NMR spectroscopy. Deuterium kinetic isotope effects and the traced hydroboration intermediate revealed that the double H transfer process occurred regio-specifically in two steps with hydride before proton transfer characteristics. Studies on substituent effects and Hammett correlation indicated that the rate determining step of the H(N) transfer is in agreement with a concerted transition state. The very reactive intermediate [NH(2)=BH(2)] generated from AB was trapped by addition of cyclohexene into the reaction mixture forming Cy(2)BNH(2). The final product borazine (BHNH)(3) is assumed to be formed by dehydrocoupling of [NH(2)=BH(2)] or its solvent stabilized derivative [NH(2)=BH(2)]-(solvent), rather than by dehydrogenation of cyclotriborazane (BH(2)NH(2))(3) which is the trimerization product of [NH(2)=BH(2)].     

Improved dehydrogenation properties of Ca(BH4)2-LiNH2 combined system

Ca(BH(4))(2)-LiNH(2) combined system is shown to release hydrogen at much lower temperature compared to the pure Ca(BH(4))(2). The improved dehydrogenation in this system can be ascribed to a combination reaction between [BH(4)] and [NH(2)] based on the reaction mechanism of positive H and negative H.     

Photoelectron spectroscopy and thermochemistry of tert-butylisocyanide-substituted cobalt tricarbonyl nitrosyl

A new organometallic complex, Co(CO)2NOtBuNC, was synthesized and investigated by photoelectron spectroscopy (PES) and threshold photoelectron photoion coincidence (TPEPICO) spectrometry in order to determine its ionization energy as well as the bond energies in the ionic forms. The assignment of the nine peaks in the PES was based on Kohn-Sham molecular orbital energies, and an adiabatic ionization energy of 7.30 +/- 0.05 eV was determined. In the TPEPICO experiment, the following 0 K onsets were determined for the various fragment ions: CoCONOtBuNC+ (8.17 +/- 0.05 eV); CoNOtBuNC+ (9.01 +/- 0.05 eV); and CotBuNC+ (10.42 +/- 0.05 eV). Because the photon source did not extend above 14 eV, we could not observe the bare Co+ ion in the experiment. The heat of formation of the CotBuNC+ ion was estimated by ab initio and DFT calculations of the CoL+ + tBuNC --> CotBuNC+ + L (L = CO, NO, NH3, H2O, PMe3) substitution enthalpies.     

Syntheses and structural characterizations of anionic borane-capped ammonia borane oligomers: evidence for ammonia borane H2 release via a base-promoted anionic dehydropolymerization mechanism

Studies of the activating effect of Verkade's base, 2,8,9-triisobutyl-2,5,8,9-tetraaza-1-phosphabicyclo[3.3.3]undecane (VB), on the rate and extent of H(2) release from ammonia borane (AB) have led to the syntheses and structural characterizations of three anionic aminoborane chain-growth products that provide direct support for anionic dehydropolymerization mechanistic steps in the initial stages of base-promoted AB H(2) release reactions. The salt VBH(+)[H(3)BNH(2)BH(2)NH(2)BH(3)](-) (1) containing a linear five-membered anionic aminoborane chain was produced in 74% yield via the room-temperature reaction of a 3:1 AB/VB mixture in fluorobenzene solvent, while the branched and linear-chain seven-membered anionic aminoborane oligomers VBH(+)[HB(NH(2)BH(3))(3)](-) (2a) and VBH(+)[H(3)BNH(2)BH(2)NH(2)BH(2)NH(2)BH(3)](-) (2b) were obtained from VB/AB reactions carried out at 50 °C for 5 days when the AB/VB ratio was increased to 4:1. X-ray crystal structure determinations confirmed that these compounds are the isoelectronic and isostructural analogues of the hydrocarbons n-pentane, 3-ethylpentane, and n-heptane, respectively. The structural determinations also revealed significant interionic B-H···H-N dihydrogen-bonding interactions in these anions that could enhance dehydrocoupling chain-growth reactions. Such mechanistic pathways for AB H(2) release, involving the initial formation of the previously known [H(3)BNH(2)BH(3)](-) anion followed by sequential dehydrocoupling of B-H and H-N groups of growing borane-capped aminoborane anions with AB, are supported by the fact that 1 was observed to react with an additional AB equivalent to form 2a and 2b.     

Reactions of diborane with ammonia and ammonia borane: catalytic effects for multiple pathways for hydrogen release

High-level electronic structure calculations have been used to construct portions of the potential energy surfaces related to the reaction of diborane with ammonia and ammonia borane (B2H6 + NH3 and B2H6 + BH3NH3)to probe the molecular mechanism of H2 release. Geometries of stationary points were optimized at the MP2/aug-cc-pVTZ level. Total energies were computed at the coupled-cluster CCSD(T) theory level with the correlation-consistent basis sets. The results show a wide range of reaction pathways for H2 elimination. The initial interaction of B2H6 + NH3 leads to a weak preassociation complex, from which a B-H-B bridge bond is broken giving rise to a more stable H3BHBH2NH3 adduct. This intermediate, which is also formed from BH3NH3 + BH3, is connected with at least six transition states for H2 release with energies 18-93 kal/mol above the separated reactants. The lowest-lying transition state is a six-member cycle, in which BH3exerts a bifunctional catalytic effect accelerating H2 generation within a B-H-H-N framework. Diborane also induces a catalytic effect for H2 elimination from BH3NH3 via a three-step pathway with cyclic transition states. Following conformational changes, the rate-determining transition state for H2 release is approximately 27 kcal/mol above the B2H6 + BH3NH3 reactants, as compared with an energy barrier of approximately 37 kcal/mol for H2 release from BH3NH3. The behavior of two separated BH3 molecules is more complex and involves multiple reaction pathways. Channels from diborane or borane initially converge to a complex comprising the H3BHBH2NH3adduct plus BH3. The interaction of free BH3 with the BH3 moiety of BH3NH3 via a six-member transition state with diborane type of bonding leads to a lower-energy transition state. The corresponding energy barrier is approximately 8 kcal/mol, relative to the reference point H3BHBH2NH3 adduct + BH3. These transition states are 27-36 kcal/mol above BH3NH3 + B2H6, but 1-9 kcal/mol below the separated reactants BH3NH3 + 2 BH3. Upon chemical activation of B2H6 by forming 2 BH3, there should be sufficient internal energy to undergo spontaneous H2 release. Proceeding in the opposite direction, the H2 regeneration of the products of the B2H6 + BH3NH3reaction should be a feasible process under mild thermal conditions.     

Nitrosyl induces phosphorous-acid dissociation in ruthenium(II)

The trans-[Ru(NO)(NH(3))(4)(P(OH)(3))]Cl(3) complex was synthesized by reacting [Ru(H(2)O)(NH(3))(5)](2+) with H(3)PO(3) and characterized by spectroscopic ((31)P-NMR, δ = 68 ppm) and spectrophotometric techniques (λ = 525 nm, ε = 20 L mol(-1) cm(-1); λ = 319 nm, ε = 773 L mol(-1) cm(-1); λ = 241 nm, ε = 1385 L mol(-1) cm(-1); ν(NO(+)) = 1879 cm(-1)). A pK(a) of 0.74 was determined from infrared measurements as a function of pH for the reaction: trans-[Ru(NO)(NH(3))(4)(P(OH)(3))](3+) + H(2)O ? trans-[Ru(NO)(NH(3))(4)(P(O(-))(OH)(2))](2+) + H(3)O(+). According to (31)P-NMR, IR, UV-vis, cyclic voltammetry and ab initio calculation data, upon deprotonation, trans-[Ru(NO)(NH(3))(4)(P(OH)(3))](3+) yields the O-bonded linkage isomer trans- [Ru(NO)(NH(3))(4)(OP(OH)(2))](2+), then the trans-[Ru(NO)(NH(3))(4)(OP(H)(OH)(2))](3+) decays to give the final products H(3)PO(3) and trans-[Ru(NO)(NH(3))(4)(H(2)O)](3+). The dissociation of phosphorous acid from the [Ru(NO)(NH(3))(4)](3+) moiety is pH dependent (k(obs) = 2.1 × 10(-4) s(-1) at pH 3.0, 25 °C).     

Facile oxidative addition of water at iridium: reactivity of trans-[Ir(4-C5NF4)(H)(OH)(PiPr3)2] towards CO2 and NH3

A reaction of trans-[Ir(4-C(5)NF(4))(η(2)-C(2)H(4))(PiPr(3))(2)] (1) with an excess of water in THF at room temperature affords the hydrido hydroxo complex trans-[Ir(4-C(5)NF(4))(H)(OH)(PiPr(3))(2)] (2). Treatment of 2 with CO furnishes trans-[Ir(4-C(5)NF(4))(H)(OH)(CO)(PiPr(3))(2)] (3). Reductive elimination of water from 3 leads to the formation of the iridium(I) carbonyl complex trans-[Ir(4-C(5)NF(4))(CO)(PiPr(3))(2)] (4). The insertion of CO(2) into the Ir-O bond of 2 forms the hydrido hydrogencarbonato complex trans-[Ir(4-C(5)NF(4))(H)(κ(2)-(O,O)-O(2)COH)(PiPr(3))(2)] (5). Treatment of 2 with NH(3) in C(6)D(6) yields trans-[Ir(4-C(5)NF(4))(H)(OH)(NH(3))(PiPr(3))(2)] (6). Storage of the reaction mixture at room temperature reveals the formation of the N-H activation product [Ir(4-C(5)NF(4))(H)(μ-NH(2))(NH(3))(PiPr(3))](2) (7).     

Isotope labeling and theoretical study of the formation of a3* ions from protonated tetraglycine

Extensive 13C, 15N, and 2H labeling of tetraglycine was used to investigate the b3+ --> a3* reaction during low-energy collision-induced dissociation (CID) in a quadrupole ion-trap mass spectrometer. The patterns observed with respect to the retention or elimination of the isotope labels demonstrate that the reaction pathway involves elimination of CO and NH3. The ammonia molecule includes 2 H atoms from amide or amino positions, and one from an alpha-carbon position. The loss of NH3 does not involve elimination of the N-terminal amino group but, instead, the N atom of the presumed oxazolone ring in the b3+ ion. The CO molecule eliminated is the carbonyl group of the same oxazolone ring, and the alpha-carbon H atom is transferred from the amino acid adjacent to the oxazolone ring. Quantum chemical calculations indicate a multistep reaction cascade involving CO loss on the b3 --> a3 pathway and loss of NH=CH2 from the a3 ion to form b2. In the postreaction complex of b2 and NH=CH2, the latter can be attacked by the N-terminal amino group of the former. The product of this attack, an isomerized a3 ion, can eliminate NH3 from its N-terminus to form a3*. Calculations suggest that the ammonia and a3* species can form various ion-molecule complexes, and NH3 can initiate relay-type mobilization of the oxazolone H atoms from alpha-carbon positions to form a new oxazolone isomer. This multiple-step reaction scheme clearly explains the isotope labeling results, including unexpected scrambling of H atoms from alpha-carbon positions.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Synthesis of [Ag(NH=CMe(2))(2)]ClO(4) and its use as a source of acetimine. 1. Synthesis of the first acetimine rhodium complexes and the first crystal structure of a diacetonamine complex

The reaction of AgClO(4) and NH(3) in acetone gave [Ag(NH=CMe(2))(2)]ClO(4) (1). The reactions of 1 with [RhCl(diolefin)](2) or [RhCl(CO)(2)](2) (2:1) gave the bis(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(2)]ClO(4) [diolefin = 1,5 cyclooctadiene = cod (2), norbornadiene = nbd (3)] or [Rh(CO)(2)(NH=CMe(2))(2)]ClO(4) (4), respectively. Mono(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(PPh(3))]ClO(4) [diolefin = cod (5), nbd (6)] or [RhCl(diolefin)(NH=CMe(2))] [diolefin = cod (7), nbd (8)] were obtained by reacting 2 or 3 with PPh(3) (1:1) or with Me(4)NCl (1:1.1), respectively. The reaction of 4 with PR(3) (R = Ph, To, molar ratio 1:2) led to [Rh(CO)(NH=CMe(2))(PR(3))(2)]ClO(4) [R = Ph (9), C(6)H(4)Me-4 = To (10)] while cis-[Rh(CO)(NH=CMe(2))(2)(PPh(3))]ClO(4) (11) was isolated from the reaction of 1 with [RhCl(CO)(PPh(3))](2) (1:1). The crystal structures of 5 and [Ag[H(2)NC(Me)(2)CH(2)C(O)Me](PTo(3))]ClO(4) (A), a product obtained in a reaction between NH(3), AgClO(4), and PTo(3), have been determined.